Bt quiet line test facility -no longer working

Has any one else had problems when trying to perform a quite line test ?
what happens in when i dial the 17070 is i still hear the recorded announcement message and the available options, i press the number 2 for quiet test and nothing happens
even if i un hide my CLI still nothing no selection of any options is available has this valuable service been withdrawn to the public now or is there some kind of fault with bt systems that is the cause ?

maybe wait until you get some more replies - I would be surprised if the quiet line test is exchange specific
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

I have recently upgraded my iMac to 10.6.8 and now find that the upload photo to Facebook facility no longer works. I have reset Safari but this has not resolved the issue - any suggestions?

I have recently upgraded my iMac to 10.6.8 and now find that the upload photo to Facebook facility no longer works. I have reset Safari but this has not resolved the issue - any suggestions? I can click on the "upload photos/video" field and it takes me to Finder to select the photo - but on selecting the photo, the Finder screen disappears as normal but from then on nothing happens.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now empty the Safari cache.
Back to the menu bar, click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari then try Facebook.
If that doesn't help, it may be a Safari extension preventing you from uploading content to Facebook.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Quiet Line test with ADSL modem connected

Hi,
If I carry out the quiet line test from the test socket without the adsl modem connected then the line is quiet, when the ADSL modem comes on line, then a very distinct hiss is heard. It is loud enough to disrupt normal phone conversations.
Different Modems, different Filters (including the one recently fitted in the master socket by openreach) make no difference.
The fault history on the line is that during wind & rain then the line is really noisy with pops & crackles . Then as the weather improves the pops & crackles drop, but the hiss will remain.
Needsless to say the ADSL modem drops out regularly during bad weather, and is now connecting way below its normal 10Mb rate.
A line engineer is booked to visit , so hence can I use the adsl modem hiss on the voice line as a diagnostic to help them discover the problem?
Thanks
Andy
PS
my modem stats are:-
Billion 7800DXL
Mode
ADSL_2plus
Traffic Type
ATM
Status
Up
Link Power State
L0
Downstream
Upstream
Line Coding (Trellis)
On
On
SNR Margin (dB)
9.6
24.0
Attenuation (dB)
38.0
21.5
Output Power (dBm)
0.0
12.8
Attainable Rate (Kbps)
11528
888
Rate (Kbps)
2268
440
MSGc (# of bytes in overhead channel message)
98
12
B (# of bytes in Mux Data Frame)
4
55
M (# of Mux Data Frames in FEC Data Frame)
1
1
T (Mux Data Frames over sync bytes)
9
1
R (# of check bytes in FEC Data Frame)
14
8
S (ratio of FEC over PMD Data Frame length)
0.0689
4.0000
L (# of bits in PMD Data Frame)
2204
128
D (interleaver depth)
448
8
Delay (msec)
8
8
INP (DMT symbol)
11.00
2.00
Super Frames
1084427
962636
Super Frame Errors
921
1
RS Words
81906658
1413000
RS Correctable Errors
3210
0
RS Uncorrectable Errors
0
0
HEC Errors
268
3
OCD Errors
0
0
LCD Errors
0
0
Total Cells
7555496
1457894
Data Cells
218532
53320
Bit Errors
0
0
Total ES
25
1
Total SES
22
0
Total UAS
266
266
Solved!
Go to Solution.

Hi,
I run a mrtg server to log stats from the modem. current connection time is an hour or so. During the storms of the past few days, the connection can be up and down every few minutes . During these periods, the crackle and pop on the line is deafening.
I am double filtered on the phone line (i.e. a filter connected to the faceplate).
At times, when the modem is stuggling to connect, extablishing a voice call can stabilise thngs. To my mind this all points to a high resistance connection. That somehow is causing the higher frequency adsl signal to be the source of lower frequency (& thus audible) hiss.
I guess it's going to depend on whether the Engineer is up for replacing overhead cables / joints . Given that one is under significant strain from large silver birch branch some 100m away from my property.
If someone could do a quick quiet line test, (with their adsl connection up) and report whether they hear a background hiss it would be most useful.
Thanks
Andy

Quiet line test has mains hum - how to fix

My BT incoming pair is located right below the electrical mains distribution board.
A Quiet line test has main hum which goes away when I trip the RCDs (there are two)
My speed has never been good (2.5Mb max - we are nearly in the next exchange area), but speed is now only 1.5 since we recently had to have an RCD replaced for safety reasons.
My immediate neighbour syncs at 2.4Mb using a different pair in the same drop wire.
I've been testing direct from the incoming pair - NO house wiring connected at all, so forget i-plate issues.
I conclude the mains hum is my primary problem.
What minimum separation distances and layouts are needed to eliminate mains interference?
I believe phone & power should cross at 90 deg and not run parallel - what are the rules?
Can I shield the existing phone wiring (with kitchen foil or something. I guess it will need earthing or something)?
The phone wiring disappears into structure at the edge of the cupboard (the same side as the incoming mains power!!) and can't be pulled thro or easily changed.
There is a little slack to mount the master socket etc a bit lower
Can one post a photo on this forum to show what I mean?
Any Help would be much appreciated
Graham S

Photo of electrical board and BT Master socket layout
Mains units (L to R)
1. Off peak clock
2. House RCD
3. Live junct. box
4. Meter
5. Incoming mains
Below is phone board
with new External supply with RCD
L to R
Box 1. Solwise filtered phone point (used as Junct box)
Box 2. BT Master with test socket in use
3. External supply Dist box with RCD + 2 breakers
Cabling:
BT line in is White sheath from lower right of picture
An UNFILTERED BT line pair goes to router;
A filtered pair returns in the same 4 core phone cable
feeding all house phone wiring from the Solwise
rear terminals (Box 1)
Clearances:
BT Master to External dist box: ~ 50mm horizontally
BT Master to live Mains tail: 220mm vertically
Phone cables have to run at RH side, near incoming mains.
My HomeHub 2 stats:           My semi-detached neighbour (from same drop wire)
Sync 1,440 down, 448 Up     2,432 / 448
Noise 15.1 / 13.0                 6.4 / 13.0
Attentuation 62.0 / 31.5       61.2 / 13.5
Power 16.6 / 12.4               3.8 / 1.3
IP Profile 1.27 / 0.45           (not taken)
Question:
The PC & the router are on a power bar, which I have regularly turned off overnight
(well after the initial BBand burn-in period)
Have I shot myself in the foot by doing this?
Graham S

Testing server no longer working

Hi All,
I recently upgraded the hard drive in my macbook pro and used time machine to copy all data to the new drive. Now my testing server (MAMP) is no longer working. When I point my browser to /localhost/ the index page comes up but none of the dynamic pages work. Dreamweaver is no longer connecting to the SQL database, even when trying to create a new connection (it only looks to 127.0.0.1). I also deleted and recreated the testing server in the Dreaweaver preferences and uninstalled/ reinstalled MAMP.
Any pointers will be greatly appreciated!

Hi All,
I recently upgraded the hard drive in my macbook pro and used time machine to copy all data to the new drive. Now my testing server (MAMP) is no longer working. When I point my browser to /localhost/ the index page comes up but none of the dynamic pages work. Dreamweaver is no longer connecting to the SQL database, even when trying to create a new connection (it only looks to 127.0.0.1). I also deleted and recreated the testing server in the Dreaweaver preferences and uninstalled/ reinstalled MAMP.
Any pointers will be greatly appreciated!

ITunes 10.5 and Get Info facility - no longer working?

Since I installed iTunes 10.5 last week, the Get Info facility for adding details of albums not on Gracenote doesn't work. The screen comes up as before but once you start typing iTunes crashes and quits.
Anyone else got this problem? Anyone solved it?
Thanks

I have this problem, and nothing appears to work.

Since loading Firefox4, my Norton Identity Protection facility no longer works.

Norton Identity Protection is a feature that launches up a pop-up window when you load a page requiring log-in details. It asks you whether you want to fill these in from data that you have saved on file. Since it no longer pops up, you have to enter these details manually. Having to look up passwords and user names for several hundred different websites that require them is a showstopper. Get me back to Firefox 3 thanks.

http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

PCS no longer working with contacts and 6086

I have applied the latest release of PC Suite 6.84.10.3.
Previously the installed level was 6.83.14.1
The send/read/write message still doesn't work but hangs the Windows Explorer for a while (this hang didn't occur previously)
But now, the contact facility no longer works. It is no longer possible to edit a contact, to store it locally or to send it to the phone even a message says everything is OK
(translate it from french: The contact has been well recorded into the phone)
Folder browsing still works correctly, either the phone folder or the memory card folder
Need a fix or a way to install the previous version, at least for the contacts...
This is a really negative feedback!
Phil

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

xsl:if test="ddwrt:IfHasRights(16)" no longer working in a New form

Hello all -
We have a list with some fields hidden for normal users, but approvers have edit access to these fields. The list has been working fine with the new,edit, and view forms all working as expected for over a year. BTW, this is on a Sharepoint Online site.
Somehow, over this last weekend, although no changes were made to any of the forms, the New item form no longer works, but rather comes up with an "unable to display this web part" error.
So, in doing some troubleshooting, I created a new form for the list and confirmed that the new default form works fine. I then added in just the code for hiding a field and immediately the form came up with the "unable to display this web part"
error.
Is this functionality no longer supported?
btw, here's the code I tested in the new form:
<xsl:if test="ddwrt:IfHasRights(16)"><tr>
<td width="190px" valign="top" class="ms-formlabel"><H3 class="ms-standardheader"><nobr>Entry Status</nobr></H3></td>
<td width="400px" valign="top" class="ms-formbody"><SharePoint:FormField runat="server" id="ff8{$Pos}" ControlMode="New" FieldName="Entry_x0020_Status" __designer:bind="{ddwrt:DataBind('i',concat('ff8',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Entry_x0020_Status')}" /><SharePoint:FieldDescription runat="server" id="ff8description{$Pos}" FieldName="Entry_x0020_Status" ControlMode="New" /></td>
</tr>
</xsl:if>
Also, quick note that I double-checked to make sure that there was no other field on the form with ff8 already.
TIA
Michael

Hi Michael,
I have reproduced when I use this function for a field of a list from SharePoint online site, however it couldn't be reproduced from SharePoint on-premise.
Not sure if SharePoint online update causing this, since we cannot check the ULS log according to the Correlation ID, I would recommend you post this issue in Office365 SharePoint Online forum via the following link, you can get a better assistance
regarding SharePoint Online issue and there may be possible to involve the back-end support engineer to look into the issue.
http://community.office365.com/en-us/f/154.aspx
Thanks
Daniel Yang
TechNet Community Support

Installed Yosemite - audio line out no longer working

After installing Yosemite, sound will only play from my Mac Pro's internal speakers.
Opening Preferences > Sound and selecting Line Out has no effect.
Why does the Line Out no longer work with Yosemite?

Update:
Seems issue with keyboard volume not working crops up again each time the system enters "sleep" mode.
Volume controls will visually make the volume appear to adjust on screen, but not affect sound level to external speakers.
Only solution I've found so far is a reboot.
Never encountered this with Maverick's or any previous OS.

Screen on Samsung Tab 4 no longer working properly (lines on it and discolored when turned on)

I went to turn on my Samsung Tablet and the screen no longer works properly do not know when it was damaged but I have had the tablet two months and would like it replaced

Hi shaunie88!
I'm sorry to learn about the issue with your tablet! When did this begin? Is there any physical or liquid damage on the device? Do you have insurance on it? Please let me know some additional details so I can help
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

New Broadband - No Dial tone - Line Test shows no ...

Hi,
I was wondering if anyone can help me before i start pulling my hair out!....
I have recently attempted to set up my new broadband and phone.
My activation date was 4 days ago and ever since ive been on the phone to customer service trying to work out what the problem is.
Summary of problem:
my phone line has no dial tone at all. On my day of activation, the manager from the office below my flat came to tell me his phone lines had been cut off. After this, he tried to set his line back up and i recieved an email to tell me someone was requesting to take over my line. So i phoned BT and they cancelled off this request and assured me they had set up the line to the right address and not the offices below me. I was told it was an internet problem and that i should wait to midnight until my activation is complete (although i had already recied two emails to tell me this was complete).
I waited a further 48 hours until today - Phoned up, explained the problem again went through line tests/broadband tests and was told that everything was fine, it should be working. It must be a connection problem between my router and device. Ive tried several devicces (laptop, phone, ipday, tv etc) and none of which work. They connect to the router but say the router is not connected to internet.
My router has solid orange light with flashing red "b".
I dont know what to do next?
Help please!!
Thanks,
Arlene

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

[SOLVED] Openbox autostart no longer working since upgrade

After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
[2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
[2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
[2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
[2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
[2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
[2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
[2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
[2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
[2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
[2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
[2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
[2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
[2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
[2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
[2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
[2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
[2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
Not sure what's going on or what could have caused it. My .xinitrc looks like this:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
export BROWSER="chromium"
# Start GNOME Keyring
eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
# You probably need to do this too:
export SSH_AUTH_SOCK
export GPG_AGENT_INFO
export GNOME_KEYRING_CONTROL
export GNOME_KEYRING_PID
exec openbox-session
My .zprofile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
My systemd startup service:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Getty on %I
Documentation=man:agetty(8) man:systemd-getty-generator(8)
Documentation=http://0pointer.de/blog/projects/serial-console.html
After=systemd-user-sessions.service plymouth-quit-wait.service
After=rc-local.service
# If additional gettys are spawned during boot then we should make
# sure that this is synchronized before getty.target, even though
# getty.target didn't actually pull it in.
Before=getty.target
IgnoreOnIsolate=yes
# On systems without virtual consoles, don't start any getty. (Note
# that serial gettys are covered by [email protected], not this
# unit
ConditionPathExists=/dev/tty0
[Service]
# the VT is cleared by TTYVTDisallocate
ExecStart=-/sbin/agetty -a dodo3773 %I 38400
Type=simple
#Restart=always
#RestartSec=0
UtmpIdentifier=%I
TTYPath=/dev/%I
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
KillMode=process
IgnoreSIGPIPE=no
# Unset locale for the console getty since the console has problems
# displaying some internationalized messages.
Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
# Some login implementations ignore SIGTERM, so we send SIGHUP
# instead, to ensure that login terminates cleanly.
KillSignal=SIGHUP
[Install]
WantedBy=getty.target
Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
setversion 1.4 failed
Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
Openbox-Debug: Moving to desktop 1
Openbox-Debug: not managing override redirect window 0x4000bb
which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
kupfer: Reading from stdin
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Openbox-Debug: Caught signal 22. Ignoring.
Openbox-Debug: UPDATE DESKTOP NAMES
Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
Id=1
Timestamp=Fri 2013-05-17 10:25:53 PDT
TimestampMonotonic=13650783
DefaultControlGroup=systemd:/user/1000.user/1.session
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=405
Audit=1
Type=tty
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=1368811547544203
IdleSinceHintMonotonic=7545641
Name=dodo3773
Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
Last edited by dodo3773 (2013-05-19 06:34:44)

WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself. What does that look like?
Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
xfce4-panel &
numlockx &
keepassx -lock &
kupfer --no-splash &
~/Documents/Scripts/startupopen.sh &
sleep 30 && sudo /usr/bin/ntpd -qg &
sudo /usr/sbin/ethtool -K eth0 rx off &
~/Documents/Scripts/conky.sh &
sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
startupopen.sh
#! /bin/bash
sleep 13
chromium &
thunderbird &
sleep 20
devilspie -a &
sleep 7
pkill devilspie &
exit
temp_throttlenew
#!/bin/bash
# temp_throttle.sh max_temp
# USE CELSIUS TEMPERATURES.
if [[ $EUID -ne 0 ]]; then
echo "This script must be run as root" 1>&2
exit 1
fi
#if [ $# -ne 1 ]; then
# If temperature wasn't given, then print a message and exit.
# echo "Please supply a maximum desired temperature in Celsius." 1>&2
# echo "For example: ${0} 60" 1>&2
# exit 2
#else
#Set the first argument as the maximum desired temperature.
MAX_TEMP=85
#fi
# The frequency will increase when low temperature is reached.
let LOW_TEMP=$MAX_TEMP-5
CORES=$(nproc) # Get number of CPU cores.
echo -e "Number of CPU cores detected: $CORES\n"
# Temperatures internally are calculated to the thousandth.
MAX_TEMP=${MAX_TEMP}000
LOW_TEMP=${LOW_TEMP}000
# FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
# CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
let CURRENT_FREQ=1
function set_freq {
echo ${FREQ_LIST[$1]}
cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
function throttle {
if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
let CURRENT_FREQ+=1
echo -n "throttle "
set_freq $CURRENT_FREQ
fi
function unthrottle {
if [ $CURRENT_FREQ -ne 0 ]; then
let CURRENT_FREQ-=1
echo -n "unthrottle "
set_freq $CURRENT_FREQ
fi
function get_temp {
# Get the system temperature.
# If one of these doesn't work, the try uncommenting another.
TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
#TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
#TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
while true; do
get_temp
if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
throttle
elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
unthrottle
fi
sleep 3
done
Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is.

Bold or Italics no longer works in Mail

When composing a message in Mail, using font style shortcuts no longer work. I've tried everything! For example, in the text of my email message, I select the word(s) that I want to bold, I press Cmd+B and it does nothing to the text. The font stays regular. Alternately, if I style it manually by choosing Format from the menu and then choosing Style, I see that it shows Bold as already being selected with a check mark, but the text still is not. This also applies to italicizing as well.
Thinking that I may have a corrupt Helvetica font, I changed the font to several others only to have the same problem. To test my corrupt theory one step further, I opened TextEdit, typed some text in the same fonts (ones that I know support bold and italics), press Cmd+B and Cmd+I and it works like a charm! No problems at all. I have beautifully bolded and italicized text. What gives?
Then I thought I would check my MacBook to see what folder Mail is reading the fonts from that I have chosen. The settings are exactly the same on my MacBook as they are on my iMac and both machines are happily running Leopard 10.5.5.
Does anyone have any idea what might have caused this or how to fix such an odd issue? Is reinstalling the Mail app possible or even worth considering? My only workaround is to type what I want bolded and/or italicized in TextEdit, then copy/paste it into my message, even though I can't remove the bold or italics once it's copied in. HELP!

Anthony Beard wrote:
NOW I KNOW WHAT THE PROBLEM WAS...--> THE FONT!!!
I always use monospaced fonts for email, by preference; it's easy to line up things. The problem is the font. Change the font to something other than what you're using, I just selected Arial and then the italic feature worked!!! Hope this helps!
It isn't about whether it's monospaced, it's about whether the font contains the style variants. Clearly Apple is taking the position of the typographic purist, which means they won't fake a bold or italic like in the old days, they only want to use it if it actually exists.

Bt quiet line test facility -no longer working

Similar Messages

Maybe you are looking for