BT Softphone and D-Link 2740B router problem

Has anyone managed to work out how to set up a D-Link 2740B router so that BT Softphone will work?
The best help I can get from BT INDIA is change the baud to 5060, what ever that means?
I am not a techie, so any help in a simple step by step fashion would be most welcome.
Solved!
Go to Solution.

no thats no what i thinking about... i dont want to connect any devices as handsets ect to my laptop, laptop must be free as is now if this router have VOIP in the lastest firmware i think i can connect router to my bt broadband line then standard handset to the router and thats it. From the router level set the voip softphone internet telephony connection for this handset and thats it.... then if I will need another standard landline handset then simply connect it straight to the bt line... thats my vision....no devices connected to my computer its not working that way 
If you already have bt home hub its working away from your computer so only one reason to change router is to do it in the same way as BT.... as BT have rubbish routers and with more than one laptop in the home network just cut the connecton this making me mad.....

Similar Messages

  • Airprint from iPhone to HP D110 printer via Bonjour and D-Link DIR-655 problem

    I have searched the Dlink, Apple, and HP forums for answers.  Many people have had the problem.  Some have found solutions.  I have tried what I think are all the solutions presented.  However, Airprint works for about 2 minutes on iPhone after restarting the printer, but then goes away.
    I tried setting up an Ad Hoc network on the printer with the iphone and it Airprints fine.  PCs, and the Mac print fine wirelessly.  But using Bonjour in Safari (on Mac or PC) shows the printer however clicking on it makes it disappear.  Using the printer’s ip address opens the printer’s setup menu on Mac and PC.
    Bonjour appears to work for about 2 minutes, then goes away.  Noted that in one Help page on HP site, it said that to connect the printer to a Mac you had to do 2 operations within 2 minutes.  Maybe the printer outputs some Bonjour info for that long, but doesn’t respond to requests from other Bonjour devices?  Or are they being filtered by the router?
    So wireless is working.  Bonjour is working iphone directly to printer.  Problem points to router setup.  All hardware has latest SW/FW.
    Most of the forum postings are from 3 months to 1 year old – no new data.  Anybody have any other ideas to try?
    HP-D110a, Model CN731A, FW: TUL1FN1044AR
    DIR-655 B1, Updated to Ver 2.07NA.
    iPhone 3GS, SW: 5.1
    Set iphone and printer to reserved ip addresses (on router) and DHCP on devices. [did not change the fixed ip addresses for about 15 other wired devices on the router]
    Turned on Multicast for both 4 and 6.  (tried on/off/one or the other)
    All on same network
    Bluetooth off
    Channel width 20mhz
    QoS off
    Advanced DNS off
    DNS relay on
    Set Endpoint Independent for TCP and UDP
    Tried port forwarding UDP 5353 to printer ip
    Short GI off
    WLAN Partition was off
    California
    SBCGlobal.net DSL
    Speedstream 1600 DSL modem
    11bgn
    Channel 6
    Auto WPA/2
    Both Cipher types
    Thanks for your help.

    Thanks for the feedback LilyLC. I too have gone through all of your steps and a host of others. Still with no luck. No problems at all with my Airport Express, but still no way to keep up a connection with my DIR-655 via WIFI N. I tried all of the steps with each firmware version too. I've given up at this point. I want the 2 months of my life back that I spent troubleshooting this mess. At least Apple could acknowledge this and say we are on it, and that it isn't only "in our heads."
    /begin rant/
    I think that Apple needs to do some re-evaluating of their software release schedule/quality control. At this point I would rather wait and have them get it right then put out subpar updates and fall into the downward spiral pattern of "the rest of them". My confidence has been shaken and I've been a mac fan since the beginning. I just want Apple to split off the iPod/Phone/TV etc. into its own division and to get back on track with the Mac line starting now. We need this stuff to work to make a living and this takes a higher priority in my mind than new twiddle apps on the iPhone.
    I do own two iPods and an iPhone but would chuck them in a river to get Leopard working solidly with the majors like Adobe, Extensis, Epson, as well as stable networking, syncing and backups. Apple really has their hands full at this point with a large list of bugs. I really wish them well but can't say I'm in the least bit happy as a consumer at this point. For the first time in a long time I feel sheepish when answering whether or not I'd recommend a Mac, and that hurts me deeply for some reason.
    /end rant/

  • WRE54G expander and D-LINK 624 router

    Note: DI-624 has 4 lines ethernet wired connectors and 1 wireless antena.
    With WRE54G powered and ethernet connected to the router line 2, the CD used to setup the expander did not worked at first time and resulted in a message in the computer: The WRE54G can not associated this AP in repeater mode.  The next step was to change the configuration of DI-624 by accessing the IP address of the router (Web page of D-link). I put security desable and applied the new configuration to the router but loss the wired (line 1) connection to the internet by DI-624. I reboot the computer and internet came back. I started again with CD setup and the message desappeared but the red light still ON even with the message congratulations in my screen for Linksys setup. When I disconnected the ethernet cable to the expander and after few seconds, for my surprise the both leds went to blue light. When I returned to secure mode in the router, the expander return to red light. Then I decided to run setup with WPA enable until final with congratulations in my screen of Linksys setup wizard but with red light on the expander. After removing the ethernet cable, then after few seconds the Expander turn both leds to blue color. I sent this mail by a computer in the lower floor using this WRE54G expander.

    Well is your D-Link router supports WDS (wireless distribution system), if yes… WRE54G may work with this router…

  • Airport express and the existing wireless router problem.......

    Ok,
    I have a wireless router working fine in my house in fact i'm using it right now with my old
    12" G4 power book to send this message, but i have recently bought a mac pro and totally forgot to put an airport card in it when configuring it. (oops) so i have bought an airport express to link the mother ship up to the internet and network but with no joy so far!!!
    can anyone help,i understand to do this the airport is set to "Bridge Mode" but i still can't get the bugger to work.
    Please help.
    (step by step instructions would be great)
    Message was edited by: alphasonic

    alphasonic, Welcome to the discussion area!
    Is your "wireless router" an AirPort Extreme base station (AEBS) or another AirPort Express (AX)? If not, you probably will not be able to do this.
    The Ethernet port on the AX is active ONLY when the AX uses WDS to wirelessly connect to a network. Unfortunately most (nearly all) are NOT compatible with Apple's WDS and therefore this is not possible.

  • SRW224G4 and 2960 Link Aggregation LACP problem

    Hello
    WE have Linksys SRW224G4 and Cisco 2960 switches.
    We made link aggregation onboth two ports between them, all is working except that when I make continuous ping between them it fails every 90 seconds one ping. I saw the problem is , when I connect to SRW224G4 by telnet and go CTRL+Z and lcli , and login, I got console. Every 90 seconds I got this messages:
    01-Jan-2000 22:14:49 %TRUNK-W-PORTREMOVED: Port g2 removed from ch1
    01-Jan-2000 22:14:53 %TRUNK-W-PORTREMOVED: Port g1 removed from ch1
    01-Jan-2000 22:14:53 %LINK-W-Down:  ch1
    01-Jan-2000 22:14:53 %TRUNK-I-PORTADDED: Port g1 added to ch1
    01-Jan-2000 22:14:53 %LINK-I-Up:  ch1
    01-Jan-2000 22:14:56 %TRUNK-I-PORTADDED: Port g2 added to ch1
    So after this one ping fails, and it goes good next 90 seconds, and then again same group of same messages and one ping fails.
    I tried all options to change on Linksys and nothing, still i got this link down and up and one ping failed.
    Did someone had same problem, can you help me somehow.
    THank you
    Hrvoje Pastar

    Hello
    WE have Linksys SRW224G4 and Cisco 2960 switches.
    We made link aggregation onboth two ports between them, all is working except that when I make continuous ping between them it fails every 90 seconds one ping. I saw the problem is , when I connect to SRW224G4 by telnet and go CTRL+Z and lcli , and login, I got console. Every 90 seconds I got this messages:
    01-Jan-2000 22:14:49 %TRUNK-W-PORTREMOVED: Port g2 removed from ch1
    01-Jan-2000 22:14:53 %TRUNK-W-PORTREMOVED: Port g1 removed from ch1
    01-Jan-2000 22:14:53 %LINK-W-Down:  ch1
    01-Jan-2000 22:14:53 %TRUNK-I-PORTADDED: Port g1 added to ch1
    01-Jan-2000 22:14:53 %LINK-I-Up:  ch1
    01-Jan-2000 22:14:56 %TRUNK-I-PORTADDED: Port g2 added to ch1
    So after this one ping fails, and it goes good next 90 seconds, and then again same group of same messages and one ping fails.
    I tried all options to change on Linksys and nothing, still i got this link down and up and one ping failed.
    Did someone had same problem, can you help me somehow.
    THank you
    Hrvoje Pastar

  • Link to router problem

    I have an iPhone 4S and can't link to my ADSL router. It has worked before. When I enter the WEP number / password it won't link. Can anyone help?

    Settings, general, reset, reset network settings. You wont lose anything doing this. If that doesnt work try restarting your phone, hold the home ad off button down until the apple symbol comes up.

  • Create View without inbound, outbound and navigation link

    Please look at this picture:
    There are:
    + PanelView
    + View 01
    + View 02
    + EmptyView
    In the PanelView, there are two buttons,  button01 and button02. When press on button01, it shows View01; when press on button02, it shows View02.
    Problem is:
    How to do above things without creating inbound, outbound and navigation link.
    Thank u a lot.

    Dear Mr.         Raghunandan Madarikuruva ,
    Everything is very easy if there are inbound, outbound, and navigation link.
    What happen if there isn't inbound, outbound, and navigation link.
    My problem is how to open each childview without  inbound, outbound, and navigation link.
    How can I do that
    Thank you for answer my question.
    Thank you again
    This is yahoo ID: [email protected]
    and Skype ID: doleminhtriet
    May I talk to you?
    Edited by: krisscage krisscage on Sep 26, 2008 10:53 AM

  • [SOLVED] Routing problems with ssh server and openvpn client

    My current setup is an arch box behind my wireless router.  My wireless router is running scripts to update the dynamic dns for my internet connection and forwarding incoming requests to port 22 on the arch box.  Simple so far.
    Now I'd like to setup OpenVPN on the arch box to connect to a 3rd party vpn service but still listen for ssh connections.  This way I can have my arch box always connected to the vpn but be able to access it from anywhere.  I believe the problem is that openvpn sets up a default route to send all outgoing traffic out over the tunnel, but I don't know enough about routing to make this work.  I saw another solution in the forum was running virtualbox and I find that so inelegant.  I'm planning on eventually learning more about ip route and iptables but I was also hoping that a networking guru could help me get this set up quickly in the meantime.
    ip route while not connected to vpn
    default via 192.168.1.1 dev eth0 metric 202
    192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
    ip route while connected to vpn
    0.0.0.0/1 via 10.120.62.9 dev tun0
    default via 192.168.1.1 dev eth0 metric 202
    10.120.62.1 via 10.120.62.9 dev tun0
    10.120.62.9 dev tun0 proto kernel scope link src 10.120.62.10
    23.29.126.102 via 192.168.1.1 dev eth0
    128.0.0.0/1 via 10.120.62.9 dev tun0
    192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.11 metric 202
    Last edited by ricka (2012-11-05 17:14:48)

    First, meop, thanks for your reply.  I did not use that method to solve the issue, but I'm going to do some more research into it (I'll speak to why I went another direction after the solution).
    My solution so far has come from this resource http://forum.linode.com/viewtopic.php?t=8737
    Since my server is behind a router, I do not have to worry about the public IP address changing and I was able to use the private IP in the route statements.  Therefore, in my case, the solution was these three lines:
    ip rule add from 192.168.1.11 table 128
    ip route add table 128 to 192.168.1.0/24 dev eth0
    ip route add table 128 default via 192.168.1.1
    Keep in mind, as the article states, that applies to all ports (not just ssh).  If you want to block other traffic, you need some extra iptables entries.
    This also solves my end goal: Being able to connect to this 3rd party VPN with a simple ssh redirect from my always connected server.  I can now ssh -D <port> <myhost>, set up chrome to use <port> as a proxy, and have everything redirecting over this VPN connection without any hassle.
    meop, this setup is connecting to a 3rd party VPN service and they provided the config scripts for the client.  I considered tinkering with that, but found this solution to work and I'm going to do some more reading about each solution to figure out which is the best overall.
    enovak, I grepped dmesg and did not see any entries about martian source.
    Now another question that comes to mind:  What if this server were actually NOT behind a firewall and it's public IP changed?  I think you'd somehow have to have a script to check to see if your Dynamic IP address changed and also have a route that only that script would use (send everything else out the VPN route).  Then, if your IP address changed, you'd have to change these routes around.  I'll leave that solution to someone else :-)

  • Wireless connection between D-Link WiFi router and Time capsule stopped working

    We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time capsule suddenly decided to go "off line". ie we could no longer access it or the printer via our wireless network. We had changed nothing - just one day it stopped working.
    We tried to get it back online with no success. As the 2Tb Time Capsule was almost 7 years old and had had some HDD issues in the passed, we figured it had got old and died and that it was time to replace it; so we bought a new 3Tb Time Capsule, thinking this would get everything back to normal.
    However much as we tried, we were also unable to get the new 3Tb Time Capsule to connect wirelessly to the D-Link wireless router. The Airport Utility did not show the D-Link wireless router or its wireless network, although we were (and are) able to see it in Systems Preferences>Networks from all our multiple devises. This in itself seemed odd. No matter what we tried, the Airport Utility would not find the D-Link wireless router and hence we could not add the 3Tb Time Capsule to the existing wireless network.
    At the end of the day we got fed up with trying to add the 3Tb Time Capsule to the D-Link wireless network, and connected it via a LAN cable to the D-Link router instead. We then set it up as its own network. Worked gerat. Having done that we thought maybe the old 2Tb Time Capsule might not have been the problem after all, so we tried extending our new 3Tb Time Capsule wireless network using the 2Tb Time Capsule wirelessly. This worked perfectly! And we are now almost back to what we wanted.
    So although we have a work around, this means now have 2 separate wireless networks as opposed to the original single wireless network where everything talked to everything else.
    Can anyone shed any light on any of the following:-
    1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
    2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
    3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?

    1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
    A firmware update to the TC came along and you agreed to it without perhaps even noticing.. it then smashed your setup because Apple do not recommend the setup you were using and it is very poor.
    2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
    Because it is such a poor setup that Apple have taken away your ability to choose it unless you know exactly what you are doing.
    3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?
    Yes, this I can help you with.
    I have several ways around the problem.. but the first one is.. why use the DIR-615 at all.. it is not a modem.. it is a very ordinary bottom end, poor single band slow wireless router.
    Why don't you simply remove the DIR-615 from the network completely.. plug whatever it is the ISP supplies you.. an ethernet connection from whatever that modem is you mentioned into the WAN port of the Time Capsule. And use the TC in some router mode.. same as the DIR-615 was setup.. dhcp or pppoe or whatever.. I doubt the TC cannot match it.
    If you have issues please post a few screenshots from the DIR-615 to show how it is setup from the WAN side.. and as long as you are given the username and password or whatever the ISP uses to authenticate then chuck out the DIR-615.
    Tell me if that is a goer.. if not we can work out a few other methods..
    eg. Simply turn off the wireless in the DIR-615. It is poor cf the TC and there is no need for it.. with the TC in bridge only use the TC for wireless as well as wireless extend with your old TC.
    Or setup roaming network where everything uses the same SSID.
    Then you will have one wireless network. And it won't matter what as long as it connects.. although IMHO this is not right as the TC is such a superior router now you are wasting your new TC.

  • Problem with Airport Express & D-Link 615 Router

    Hi there, this is my first post on the Community but as I am buying more Apple products I decided to sign up.
    I have a D-Link 615 wireless router which would not broadcast far enough to the other side of my house (open plan) so I ran a cat 5 cable and connected up my Apple Express  to give wireless to this area. This has worked very well up until a few days ago when I upgraded the firmware to V.7.6.4 on the AE. Since then I have lost the wireless from the A.E. and despite resetting  and reconfiguring it I cannot seem to get it to work as it was.
    The A.E. Utility is telling me that it cannot find the wireless network once it has updated, but doesn't seem to have a problem recognising the network name when I am initially configuring the unit. I have tried just about everything I can think of but to no avail, even plugging the A.E. into the router via another port and Ethernet cable but still with the same results. I thought that it (might) be a security issue so turned of the D-Link wireless security but still no result.
    The strange thing is that it WILL 'create a new network' without any problem and broadcast at full strength!
    Anyone have any ideas???
    Many thanks

    Hi Joe,
    You got the short answer from
    b Henry B,
    which will save you lots of aggravation.
    But if you're as curious, as I was, here's some more info I came across. I thought naively that a simple wireless 'repeater' would be straightforward and would work across different vendors of wireless basestations.
    Maybe it would? But the Airport Express implements something called a
    b Wireless Distribution System
    b (WDS),
    which sounds to me more complicated than just a simple wireless repeater. Maybe it has something to do with also honouring the encryption in the wireless signal to be repeated, err extended? Apparently WDS implementations are not standardized and currently
    b rarely
    work across different brands of wireless basestations.
    Although apparently several folks have been successful extending the range of
    b linksys
    brand wireless basestations using an Airport Express,
    b IF
    they first update (swap out?) the linksys firmware with another (open source) version. Whew!
    Anyhooow, for your situation, a brute-force option might be to replace the Ethernet cord between the Rogers cable modem and the D-LINK with a longer cable, so you can move the D-LINK closer to Living Room. (Or possibly get a longer CATV cable and move both the cable modem and D-LINK). You could even try increasing the range of the PowerBook with one of those Quickertek antennas.
    But I expect it would be
    b cheaper and easier,
    if it came to that, to just replace the D-LINK with a 2nd Airport Express, which would then inter-work with the Airport Express in the Living room, using
    b WDS.
    best of luck,
    ...ben

  • Wi-fi bridge between two routers TP-LINK WR841ND (WDS).  HP 1536 dnf MFP connect to one of this routers (copper).  My Ipad or Iphone can't find HP 1536 dnf MFP (using Eprint). Ipad and iphone connect   to router across WiFi.

    Hello.
    I have wi-fi bridge between two routers TP-LINK WR841ND.
    The name of this technology - WDS.
    HP Laser JET 1536 dnf MFP connect to one of this routers (copper).
    Second device (my NETBOOK) connect to second router (WiFi).
    I have good communication between NETBOOK and HP Laser JET 1536 dnf MFP via WiFI-bridge.
    In usual case NETBOOK can find (and can Ping) network printer and make a print some files.
    But my Ipad or Iphone can't find HP Laser JET 1536 dnf MFP (using Eprint). Ipad and iphone connect
    to router across WiFi.
    Please, help!

    Are you using the ePrint Mobile App, the ePrint Printer Control App, or just trying to send an email to the printer's ePrint email address?
    Does AirPrint work?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Had problem with bookmarks, history, back button and google links not working.

    For the last five days i've had problems with firefox. First, i noticed that it was running incredibly slowly and then that all the links in the google search were not working. Then i noticed that neither was the history, bookmarks or back button. I went on to facebook chat to ask for help. First, I was told to reinstall firefox, which didn't work. Then i was told to do a "clean" install where you rename the old firefox folder in the programs folder so that it makes sure when it's installed that everything is new and nothing is corrupted. That didn't work either. I then disabled my antivirus software and firewall to see if that was causing the problem. It was not. Then I installed an anti-malware program to remove any adware or spywar,e which it did remove from my computer, but it didn't solve the problem. The chat person was at a loss and I don't blame him/her because so was I.
    The reason I'm writing this is in case anyone else has the same problem. The only way I solved it was first by uninstalling and making sure to check the little box asking if you want all personal data and such associated with firefox also removed (which removes cookies as well) and then I finally thought to delete all the cookies from the rest of my computer also. Once all the cookies were gone and i had fully uninstalled firefox and personal data, I reinstalled it with a newly downloaded file and it is once again functioning properly. Hope this is helpful to anyone who's been ripping their hair out. :)

    '''I have the same problem!!
    But in my case, not just Google links.
    The problem happens with all the websites links.
    Please...
    Help us!!
    Thnx'''

  • ILife 08- problem with Podcast and Blog links on landing page

    Hello I have iLife 08, running OS 10.4.11. The Podcast and Blog links on my iWeb landing page appear but don't do anything. All was working fine one week ago. They load, and when you mouse over it the links looks like they are going to work but don't.
    Any ideas on what the problem is?
    thanks in advance for your time,
    -g-

    Hi Chad,
    Yes. I had a similar problem. The 1st click on an iTunes hyperlink (i.e. http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=97154883 ) occasionally does nothing for me in Safari. And as you described, the 2nd click usually works. I actually didn't notice the Safari window containing the link closing itself. I'll keep an eye out for that.
    I'm running iTunes 6.0.2 with 2.0.3. See if running an update changes anything for you.

  • Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router)

    Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router?
    I'm using a tp link router and sometimes it takes a long time delay for my 2 mac computers to connect each other. I don't know this is because of the router compability or the computers.

    Anyone knows?

  • Problems with template and page links..

    Hello community!
    I'm pretty new to dreamweaver Cs4 and am having a slight problem. I have my template.dwt file and 5 other pages which use this template layout. However when I preview my website in my browser, the template.dwt file links to all the pages, however when I click on another link (a page link) once on this page, the hyperlinks from the navigation cant be clicked. In other words the navigation turns into just text and no hyperlinks.
    I want to be able to click on any page on my website using the navigation bar, so i can go back and forth onto pages all over my website using my navigation.
    Anyone know what to do or a solution to allow me to have all the links working from the template
    Thanks

    You are being confused by a) not understanding root relative vs document
    relative links, and b) not understanding how DW previews files.
    If I have a document with a link to an image that looks like this -
    <img src="/images/foo.gif"...
    That's what's called a root relative link.
    If I preview that document in DW, then the browser gets the document, sees
    the leading "/" and reads that as the root of the hard drive, since the
    browser has no idea where the root of the site is.  Thus, the image is
    broken in the preview.
    If I have temp files enabled, then DW will secretly convert the file being
    previewed into a temporary file, and hand that to the browser.  This temp
    file has had all root relative links converted to document relative links
    (as you will see by looking at the code in the browser), and has had all
    include files actually embedded in the page, and has had all external CSS
    and js markup embedded in the page.  In other words, DW has made the
    document into a stand-alone page.
    If you do not have temp files enabled, all of these links would be broken on
    preview.
    Now - if you are using root relative links, AND you have temp files enabled,
    AND you click away from the previewed document, then all of your links will
    be broken, since DW has not made that linked file into a temp file.  This is
    what you are seeing.
    So - if you want to click away on preview, then you must use document
    relative links for the site -
    <img src="../images/foo.gif"... (for example)
    These will still work on preview since the browser knows how to determine
    the current file's location and how to follow that path.
    GEDDIT?

Maybe you are looking for