BT SPORT Broadband problems moving Hub near TV

My Hub fired up immediately when sited upstairs by my Computer, however would not connect to Broadband when moved near the TV.
Spent hours on the 'phone with BT technitians, testing cables, moving Hub away from TV etc. Guess what I moved the BT ADS Filter from the main Socket to the junction of the extension lead to that from the from the Hub. The Hub then connected within seconds.
BT engineers, technitians note!
Flying Yorkshireman

Update: Gets worse!
Phoned up and asked about an update regarding my subscription issue with BT SPORT HD. Advisor was unaware of my issues and was very appologetic, I asked to speak to a manager and i was transfered through to cancellations! I was advised again that they could not amend an open order and I should wait until connected to upgrade to BT SPORT HD. Is this all a ploy to get you to pay because you cannot subscribe during the offer period?
When transfered through to cancellations I was put on hold whilst my notes were read, 30 mins later still on hold and I hung up.
This is getting beyond a joke.
Can BT not just put a note on my file and issue a credit to the effect of £3 per month to cover the HD sub?
The customer service run around brings back bad memorys of Setanta Sports ....now that was shocking customer services.

Similar Messages

No broadband light on hub, nearly 3 weeks...

I have arrived at this forum as it seems to be the only place BT problems are resolved and I'm at the end of my patience. My broadband activation date was 16th April 2013 and as yet the broadband light has remained off. I've wasted time and money trying to get through to the correct department, been cut off without explanation and been promised call-backs that haven't happened. After finally getting through all the technical checks the latest prognosis is that there is a local area connection fault and the earliest an engineer can come and look at it is 17th May. A full month later.
I find all this a bit bewildering since BT broadband on the very same phone line was working perfectly only about a month ago (I have taken over the phone line from a previous tenant).
I have easily spent £50 on phone top-ups and dongle bills trying to get this sorted and to top everything off, BT has had the cheek to bill me for my first month of non-existent service.
Any help from anyone would be very welcome.
Karen

Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Problems Moving Ripped DVD from Itunes to Ipod

Problems Moving Ripped DVD from Itunes to Ipod
I am having a problem transfering ripped DVD's from the Itunes Video folder to the actual Ipod. I thought one of the cool points of the Video Ipod was that you could play DVD's on it. I know I needed to use special software to achieve this since I researched it here. I am using Handbrake Lite since regular Handbrake look too daunting for me. I also used Isquint, since it was recommened here. I used both without changing anything on both of those progams other than click the go button. The DVD's will play in Itunes but it won't allow me to drag them to the Ipod. They are in the Video folder in Itunes. What in the wild, wild world of sports am I do'in wrong? I assume it's something stupid because the device is stellar. Hope someone out there can lend us a hand.
Kind Regards,
Julias

I am having a similar problem, and i cant contact ipod 2 ask 4 help - its not explainedo online:
my ipod will only upload video podcasts, no ordinary videos, except for one. they are all the same format (.MOV quicktime), and my i tunes has them all on it and plays them fine there, its just when i drag and drop or insert my videos onto my ipod any other way theydont get uploaded onto my ipod like everything else does, there seems no way that i can get my own videos onto it. only one video that isnt a podcast has ever uploaded, and its the same format as the others!
Any ideas or help would be apprichiated ( i cant spell:P)

Trouble selecting and moving objects near text in Adobe Illustrator? Try this.

It's been 4 years since I left Corel DRAW for Adobe Illustrator. One thing I could never get used to is the crazy way text has an impenetrable invisible sheet over it making it hard to select objects near or behind it.
With Corel DRAW I was used to be able to select text by simply clicking on the visible area of the text. Selecting stuff behind the text by clicking between letters or right next to a decender was never a problem. But Illustrator is a different story.
Tonight I finally found a way to make selecting text in Illustrator behave more like Corel DRAW.
I wrote it up here: http://www.johnstanowski.com/blog/trouble-selecting-and-moving-objects-near-text-in-adobe- illustrator-try-this/
Just thought I'd share!

It's not spam, but thanks for assuming.
I was up really late writing that blog post. Posting a link was the quickest way to share and be able to go to bed.
Plus it's rather lengthy. I thought that would be rude to use an Adobe forum for my articles.
If you saw my blog you will have seen there's not much going on there at all, and no calls to action to hire me. I don't have anything to gain by getting traffic.
And, yeah, layers work for selecting, but that slows you down. Who would want to look away from their work to find and select a layer when they're trying to tweak positions of objects? Layers suck for selecting quickly.
And there must be something wrong with me but I find using Type Object Selection by Path Only by itself hard to use. I'd really just like to click on the text itself rather than an invisible hairline you have to probe to find.
Here's the post. I hope people who had trouble like me find it helpful.
Do you have trouble selecting objects near Point Type in Adobe Illustrator? You’ve been there. You want to select an object. Problem is, it’s really close to piece of Point Type. All too often we try to select objects that wind up being unreachable because they lie too close to a piece of Point Type, which we wind up selecting instead. Luckily, after years of angst, I discovered a solution.
Point Type in Adobe Illustrator is funny. There’s this invisible “shield” around it. This shield is much larger (at least it seems that way) than the text itself. It prevents you from selecting objects behind text by clicking between letter and words. This shield is particularly meddlesome with lowercase letters and decenders because we think surely we can click on that blue box (or whatever) because it seems far enough away from that Point Type. But the lowercase “g” in the Point Type’s territory.
Okay, now that we know we’re talking about the same thing, let’s move on to the solutions.
Step 1. Check ‘Type Object Selection by Path Only’ in Preferences
You’ll find this option in Preferences/Type. Click it and that nasty text shield goes away. But there’s a price to pay. With this option activated, the only way you can select your text is by clicking on the text path, a super, tiny, thin baseline thingy under all the letters, but above decenders. It’s really hard to grab. To do it right you need to slowly approach the text path with your cursor. When you’re right over it, Illustrator will let you know by adding a small black square to your cursor. Now, you can click, hold and move your text. But this workflow can really slow you down and break your rhythm, maybe even more so with it turned off.
Step 2. Add the ‘Outline Object’ Effect
Select your Point Type and, from under the Effects Menu/Path/, select Outline Object. This effect does something really sweet to text in Illustrator: it lets your Point Type objects be treated as if their were converted to Outlines. You can still edit the text, but as far as selecting it, Illustrator now considers it outlines and shapes instead of a text object. Basically, it now considers the Path of the text to be the text itself! Now, since we’ve already checked ‘Type Object Selection by Path Only’ we can now click on the text to select it. Just the text. Not the baseline, not the wacky invisible shield surrounding it.
And now… you can select things behind the text by clicking between words and letters. And the ONLY way to select Point Type is to click on the visible parts of the text itself! Problem solved.
Potential Problem:
Too much of a good thing could be a bad thing. Let’s say you have some Point Type set in a very light face and it’s pretty small or you’re zoomed way out. Selecting that text could be a problem since you have to actually click on the text itself. Actually it isn’t that hard, it may just require an extra click to grab it. If you have a set of smaller, light-faced bits of text, you can elect to just not apply the Outline Object effect to these. They’ll get their ‘shield’ back and be easier to click on. And since they’re so small, they don’t pose a problem with selecting things behind them anyway.
Applying this technique to your old files
Now that you’ve learned this awesome new way to work around type in Illustrator, you may be anxious to open yesterday’s project and get back to work. But you may be not be looking forward to applying the Outline Object effect to each and every piece of type. For this you can use Illustrator’s “Select Same” feature. Select one piece of text. Then from the Select Menu click on Object/Text Objects. Now ALL of your text objects will be selected, and you can apply the Outline Object effect to all of them at once!
That’s it. If you build ads or work with a lot of type in Illustrator, you’re about to be able to work a lot faster… and happier.

My ipod touch will no longer download new apps after i updated via apple store.How can i get the updates deleted or correct the problem moving forward?

My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?

Basics from the manual are restart, reset, restore.
Try those

In Safari 8, I have problems moving my bookmark folders without it going into another folder. I cannot organize them in any manner?

In Safari 8, I have problems moving my bookmark folders without it going into another folder. I cannot organize them in any manner?

Keeping the folder you are moving to the far left will do the trick.

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

I am having a problem moving across cells in Microsoft Excel. When I use the arrow keys, the sheet moves, instead of moving to the next cell. Would anyone have any thoughts on this, please?

Hi,
Did you find a way to solve your problem ? We have exactly the same for one application and we are using the same version of HFM : 11.1.2.1.
This problem is only about webforms. We can correctly input data through Data Grids or Client 32.
Thank you in advance for your answer.

Problems moving an object with the selection tool

Im working on CS2 and since last week I have a problem moving objects with the selection tool: To move the object I am obligate to select the object first, and then click at the edge/stroke of the object to drag it. Before that I could move the objects just by selecting somewhere in the object and then just drag it to some other place in one step. I think I maybe changed something in the general preferences....

Ho thanks a lot Kurt!!!!! Indeed, that was the problem!!! Finally I can work normally again.... (the joker was me...but not on purpose)
Thanks again!

Problems moving edited photos onto a new document.

I am new to Photoshop CS3 extended and i am having problems moving an edited photograph to a new document for printing. I get a screen stating 'The target document has a different depth than the source document. This may result in lower than expected quality. Are you sure you want to proceed' If i say yes nothing happens,
if i try to print from the edited photograph without moving it onto a new document it doesnt fit onto an A4 paper and comes up with 'Specifit print settings (Interpolation, Calibration,Encoding) will be ignored since you are printing to a non post-script printer.
This has just started to become a problem I have not changed printer which is a printer/scanner/copy Lexmark 4550 please help

Sounds like you are trying to make a move a 16bit image into an 8 bit image. besure to convert it before you transfer.

Problems Moving iTunes Library To Another PC

Hi All -
I'm having problems moving my iTunes Library to another PC.
OBJECTIVE
I have a new PC, and I want to move my iTunes library off my old and onto the new. I want to be sure that I get all of the music and videos that I have both purchased and loaded. Total library size 132 GB.
MY CURRENT SETUP
o Old PC - Windows XP
o My current iTunes Library is not in the default location; my C: drive was too small, and I installed a separate data disk quite some time ago
o All of my files (music, videos, apps, etc.) are consolidated in the new library location.
WHAT I'VE DONE SO FAR
o Researched to find out how to copy my library to a new PC - from Apple's site
o Copied my iTunes library directory to an external disk.
o Installed iTunes on the new PC
o Opened iTunes on the new PC and changed the location of the library to a secondary data disk.
o Closed iTunes
o Copied my iTunes libaray from the external disk to the new PC library.
o Opened iTunes - where the heck is my stuff?!?
o Research ... i need the .itl file
o Apparently the itl file was not in the directory structure when I copied my library onto the external disk.
o Find the itl file ... copy the itl file ... open iTunes while holding down the <SHIFT> key
o Point to the new itl file which is now co-located w/ all of my content.
o iTunes shows my stuff, but when I click on one of the items, it tells me the file it not found.
Clearly I'm missing a step somewhere. I just want to move all my stuff, lock-stock-and-barrel, to a new installation of iTunes, on a new PC, into a library location other than the default.
Help!
Thanks.

With iTunes closed, copy the files iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork from C:\Documents and Settings\Compaq_Owner\My Documents\My Music\iTunes into G:\ - Note that sentinel is a hidden file so use Tools > Folder Options > View > Show hidden files and folders in Windows Explorer to reveal it. The iTunes Music Library.xml file and Previous iTunes Libraries folder won't be needed.
Press & hold down shift as you click the icon to launch iTunes. Keep holding until prompted to choose or create a library, click choose and browse to G:\iTunes Library.itl
Check that you can play a file or two. Close iTunes
Rename G:\iTunesLibrary as G:\iTunes Media
Launch iTunes. Check under Edit > Preferences > Advanced that the media folder has been automatically updated to G:\iTunes Media. If not, use the Change... button to correct it. Don't consolidate files if prompted. Close iTunes, then reopen. Check that you can play media.
Close iTunes. Create a folder called G:\iTunes. Move the files iTunes Library.itl, iTunes Library.xml, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folders Album Artwork & iTunes Media inside G:\iTunes.
Press & hold down shift as you click the icon to launch iTunes. Keep holding until prompted to choose or create a library, click choose and browse to G:\iTunes\iTunes Library.itl
Check under Edit > Preferences > Advanced that the media folder has been automatically updated to G:\iTunes\iTunes Media. If not, use the Change... button to correct it. Don't consolidate files if prompted. Close iTunes, then reopen.
Check that you can play media. You're done....This library can now be connected to any computer and you can use the shift-start-iTunes method to connect to it. whatever drive letter is provided.
If the media won't play at any stage stop, check that you've followed the steps properly or ask for help.
tt2

Problems moving app from tomcat 321 to 4.0

I have serious problems moving an old app from tomcat 321 to 4.0. I tried just moving the entire webapps/<myApp> to the new server, and also using a war-file, but I get a message saying that one of my Beans doesn't exist.
Its a bean in the /WEB-INF/classes subdir, so its in an annonymous package. The jsp-page accessing it uses the
<jsp:useBean id="dateBean" class="DateBean" scope="session" />
tag.
Error message from jsp-page says: org.apache.jsp.DateBean not found.
Seems my tomcat4 doesn�t use the web-inf/classes in its classpath???
regards
Markus

I don't believe the current Servlet specs allow for anonymous packages. Try moving your class into its own package (under WEB-INF/classes/packagename/) and see if that fixes the problem. Also be sure to change the <jsp:useBean> tag to give the full classname in the class attribute.

Problems moving distribution from one environment toanother

Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partition

Lori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike

Problems moving layers

I've been an Elements user for 10 years, using PE12 since June. I just recently had a problem moving layers both within and between files. When working on a file if I try to drag and drop a layer it just snaps back to where it was. I can move the layers with the arrow keys but this takes entirely to long. I don't understand why this just now started happening. I can open my previous version, PE 6 and move layers as I always did but since I paid to upgrade to PE12 it would be nice to be able to use it. Any input on how to resolve this would be greatly appreciated! Thanks in advance, Kirsten

Mac user with Yosemite? If so, see:
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Suddenly I have problems moving files to the trash... get a dialog saying Finder wants to make changes and I must provide the password... Any explanation or ideas how I can get this to stop?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

BT SPORT Broadband problems moving Hub near TV

Similar Messages

Maybe you are looking for