BT turning speed down and latency up ??

BT turning speed down and latency up ??
Hi All & Happy new year
Wanted to see if anyone else has seen the same issues as I have.
Right 4 ISP's in the last 18 mths.
1. Zen internet - perfect but expensive, 7mb down speed.
2. Newcall (resold Tiscali ie TalkTalk) awful, ever degrading service, speed, latency and "locking/freezing" where had to reboot router to reinitialise connection to exchange.
3. Idnet - perfect, 7mb again, issues disappeared the moment I switched.
4. BT - same as TalkTalk - same old nightmare, and BT are not helping, denying any issues. (speed down to 3mb, latency v. high, rebooting router 3 to 5 times a day).
In the above sequence nothing changed in terms of hardware or line. Did testing with faceplate off - 3 different routers - all same results.
Changed to BT to save money, but it's been a bad move.
I can only conclude that TalkTalk and BT actually restrict access and speed. If a third party can deliver superior service on all BT kit something is seriously off - it does not seem likely to be accidental.
Any thoughts guys ?
(Currently trying to get contract canceled as service not fit for purpose, (click and wait 2 mins, or click and nothing happens, reboot router and it's ok again for a little while, but speed way down).
How do I get out of the contract and get back to a competent ISP ?
Any thoughts or contacts gratefully received.
(Apologies if broke any rules - first post).

Sorry to hear that your  having issues with your BT Retail services.
You will either be on the ADSLMax (upto 8mbps) service or if your exchange has been BTw 21cn upgraded you maybe on the ADSL2/2+ (upto 12/20mbps) service depending on your line quality and length.
However these upto speeds may not be the speeds you will get as ADSL broadband connections are very dependent on the distance from your property to the exchange and the quality of your line. The further away you are from your local exchange the slower your broadband speed will be.
To enable the community to help you please see the advice below:
Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
A summary of the checks are:
1a) Is your router/Homehub connected by a BT NTE5 master socket, Adsl Filtered Master Socket or Extension Socket?   Please bear in mind that extension cables and extension sockets can reduce the broadband's performance. If you have an Old LJU master socket then please say.
1b) Have you tried the Test Socket? - if you have one. - Bear in mind that lots of manual distconnections/turning off the router/HomeHub will cause you more issues as the DLM will either reduce your sync rate, increase your noise margin or put you into a banded profile.
2) Can you please run a BT speed test (including IP Profile) http://speedtest.btwholesale.com (not beta version)[Best done with a wired, Ethernet, connection] After Quick Test is done you need to click "Further Diagnostics" to get IP Profile.
3) is there any noise on your line. dial 17070 option2 ,called quite line test, from landline phone. should be silent but slight hum normal on cordless phone.
4) please post adsl line statistics 
ADSL Line Statistic Help:
 If you have a BT Home Hub like the one below...
 Then:
 1) Go to http://192.168.1.254 or http://bthomehub.home
 2) click Settings
 3) Click Advanced Settings
 4) Click Broadband
 5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3.A firmware ending in 1.3)
or http://bthomehub.home/index.cgi?active_page=9118 (for bthomehub3.A firmware ending in 94.1.11)
You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
 If you have a HomeHub 4 then the majority of the ADSL Stats shown in the previous Hubs will not be there.
for HH4 users you can go to hub manager then select troubleshooting then logs and are look for 2 entries together which will show theconnection speed and noise margin for when your HH4 last sycned with the exchange.
There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
Don't have a BT Homehub/Voyager?
• http://192.168.0.1 for a netgear router and look for ADSL adsl statistics with information like noise margin and line attenuation, connection speed
• http://192.168.2.1 for a belkin router and look for ADSL adsl statistics with information like noise margin and line attenuation, Data Rate
I'm no expert, so please correct me if I'm wrong

Similar Messages

  • My iPad mini screen keeps turning upside down and I cannot fix it, please help!

    When my iPad mini is in the upright position, the screen turns upside down and I have not touched the rotation switch, it just does this on its own and I cannot get it to go back into the right position. Also, it will not let me view it in the longside "landscape" mode. Can someone please help me fix this and tell me what is going on, why is it doing this? I have only had it for a few months and it is very upsetting to see it doing strange things like this without my prompting. Please help! Thank you so much!

    Settings > General > Lock Rotation..
    Or...
    Double-press the home button...
    Swipe to the right until you get to the Portrait Orientation Button...
      Understanding the Side Switch
    http://support.apple.com/kb/HT4085
    Also... Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Screen turned upside down, writings went mirrored

    The screen on my ipod went bad, the screen turned upside down and the writings went mirrored. I have tried to reset AND restore it to no avail. The music plays fine, it's just the screen had become annoying. Any help please?

    You can try the usual apple troubleshooting:
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    I am not entirely sure what the problem is from your description. Your saying that the display is acting like it is rotated sideways when it is not and the writing appears to be backwards?
    i

  • Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

    Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
    On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
    (I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

    Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

  • I cannot change song order on playlist with highlight and drag. I have turned off shuffle and highlighted the far left column( up/down arrow) of playlist. My mac pro is running 10.5.8  and am using itunes 10.4.

    I cannot change song order on playlists (old or new) with highlight and drag. I have turned off shuffle and highlighted the far left column (up/down arrow) of playlist. My mac pro is running 10.5.8  and am using itunes 10.4. I can't drag and drop "music" to "playlist" but can right click and get the option to "add to playlist." No such option for moving song within playlist, only the up and down arrow which moves song from top to bottom list, so if it is #4 from top it will move to #4 from bottom. Stupid I know. I spent over an hour with Apple support, reinstalled itunes, restarted and rebooted computer. Networked with my laptop which is running 10.6.8 and itunes 10.4 and it can drag and drop. The final Apple support solution was to reinstall my operating system. I would prefer not to. Any other ideas?

    After looking at other people's posts, I think it's official: there is a bug. Itunes support said I should not have lost the drag/drop tool and I haven't on the laptop that is running itunes 10.4 and operating system 10.6.8. I chatted with someboby who lost both his drag/drop and side scroll and what we have in common is a wacom tablet for a mouse. My laptop is a wireless mouse. I reinstalled whatever updated driver that wacom has out there, shut the system down for night, hoping for magic, but alas none to be had. So if I want to change song order, I network the laptop and desktop, share the screen on the laptop, drag and drop to my heart's content and curse Apple for making me work this hard to find the tool that was once at my fingertips. Apple also let me know that if I want to share songs in household that the hundreds on songs that were purchased for .99 need to be repurchased for another .30. Maybe Apple is holding my drag/drop tool captive til I pay up the money or Maybe the next update will fix the problem, I for one give up for now.

  • My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air

    My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air. If sombody could tell me how to fix this that would be awesome!

    Can't connect to the iTunes Store

  • My mX890 shut down and will no longer turn on.

    My  canon mx890 shut down and will not turn on. Power is good. Is there a reset button?

    Hi klarson,
    There isn't a reset button on the PIXMA MX890 series printer that would get it to turn on.   To resolve this, please try these steps:
    Please follow these steps to resolve this issue:
     1.  Please confirm other devices plugged into the electrical outlet power on.  At this time, please do not disconnect the printer at the electrical outlet.  If there is an empty electrical slot, plug in a lamp to make sure the outlet is working.
     2.  Disconnect the power cord completely at the back of the printer.
     3.  Please push the power cord back into the receptacle ensuring that the cord is pushed in as far as it will go.
     4.  Pull the cord and see if it easily slips out from the connector or if it seems secure.
     5.  If the machine does not power on automatically, press the ON/OFF button.
     6.  If the machine does not power on after the power cord was pushed in all the way at the back of the printer and the ON/OFF button was pressed, please unplug the power cord from the machine and leave it unplugged for no less than 20 minutes.
     7.  Please then reconnect the power cord, ensuring that the cord is pushed in as far as it will go.
     8.  Press the ON/OFF button.  
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

    my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

    i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

  • My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

    My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

    Hello Toby135
    Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Regards,
    -Norm G.

  • My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command p r, what else?

    My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?

    A four year battery could be dead. I'd contact an Apple Service Center.

  • My iPhone 4s fell down and the LCD turned blue and black stripes line, is it still covered by the warranty?

    My iPhone 4s fell down and the LCD turned black and blue stripes and the warranty is still active.
    My question is, is it still covered by the Apple? How to fix it without changing the LCD?

    Accidental or wilful damage is not covered by Apple's standard or extended warranty. AppleCare + does cover this kind of damage for a small fee.
    When taking the phone to Apple for repair Apple will not replace the faulty part. They replace the whole phone. However some stores may offer screen replacements.

  • My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone

    Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise

  • My MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before

    MacBook Pro just shut down without notice. It had about 40% of the battery life. It will not turn back on and I noticed when plugged in the little light on the power cord is blinking orange, not a solid green like normal.  Anyone have this issue before?  I've only had this for about 3mos.  I called apple support. They tried one thing then said I have to take to the apple store. Unfortunately I don't have one nearby. So before I travel an hour+ away I thought is give it a shot on here. Thank.

    Hi S,
    Did they have you try an SMC Reset: http://support.apple.com/kb/HT3964?

  • I have an ipad mini and it wont turn on i tryed holding the home button down and the sleep button every one has said that and nothing is working how can i fix it

    i need help with my ipad mini it wont turn on i have helled the home button down and the sleep button together and nothing is happening

    What happens if you plug it in to charge?

Maybe you are looking for

  • Stock on posting date-MB5B

    Hi! I'm looking for a function that works as MB5B, I need to calculate the stock on posting date, I used the debugger, but I couldn't find a function. Thanks!

  • How can I remove an OVS extension from a context attribute?

    In our Web Dynpro application we provide a generic search mask to the user. The information about the search fields like labels, length etc. is retrieved from the backend during runtime. Also, the information if there should be a value help available

  • Goods receipt of by product in subcontracting process

    the by-product are produced in subcontracting. we have to take back this by product into our company from the subcontractor. we have to use which movement type to take it back and the transaction code

  • Lost iTunes Info

    On March 14th 2006 as I was trying to download a screen saver from apple when my computer went on the fritz. I relaunched the Finder and to my horror my computer had been reset to the factory settings. Thankfulyl no data was gone but getting everythi

  • Implementing order to cash in siebel using AIA 2.2

    Hi All i have installed the patch QF 9202 for Order to cash in siebel. I am unable to import AIA_INTEG_ID-O2CMST80.sif in siebel for schema changes. has any one come accross this issue while importing sif......if yes do let me know the work around. R