BT TWIN TALK = possible, reason for SLOOOOOW inter...

since november 09 we have had "intermitent" broadband.
it's only recently since it got worse (96k) we have queried it.
we started a new business and got BT CALLSIGN as a second number for our house.( Nov 09)
so that we didnt have the "business customers" calling our home number, we also installed BT TWINTALK to "switch" from our home number to the business number.
we have now found out that THESE SEEM to be the cause of our "intermittent" BB.
as over the last 2 days. our line has been SOLID overnight, untill the business number rang (ISP said, same time line dropped, as we logged the call came in.
SO MY QUESTION.....
without having to pay wads of money out for a second line,
does anyone know how we can keep our home number for us,
but the business number, to "switch" to the other phone?

I would just like to add that I own two properties. Both have single BT landline numbers. Both have CallSign. Both have internet via AOL. I have no problem with Internet speed at either address.
I would like to add that I will never leave BT as my line provider while the CallSign service exists. I cannot understand why they do not advertise it more.

Similar Messages

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...

I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...
I dont have any contact detail of that person whom i had bought this phone..

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Possible reasons for Error 30005?

Hi All,
we're on ep7, sp12..we've been encountering the foll error lately when we try to use any BI query frm one particular BW system..(holds true for all users)
when we try to drag the query to the iView, we get the Error -30005, Cannot create the BI data service, Cannot add BI data service to the iView.
the strange things is we can search for queries. however, upon attempting to see the characteristics, etc we get the foll error: "Error -30027 Cannot retrieve structure, Cannot read query description.."
Could anybody pls advise on the possible reasons/resolutions for this?
thanx
prachi

Hi Prachi,
I feel with you. I have the same problem and just a few hours ago everything was working fine. thats very strange.
Mark

Possible reason for going CO1P

Dear Experts,
We are doing batch inputs for confirmation,because of huge records.
Earlier system was doing correct posting witout any error.
Recently we come across COGI error, while doing confirmation with Z program.
Now system is gogin to CO1P.
Please suggest what might be the possible reasons.
Thanks

Dear Prasobh,
Already we have provided the delay time for postings.
Here in our case we are capturing around 1600 entries of batch input.
Thanks

One possible reason for the spinning beachball with versions 10.0.2 trying to play/see anything

Hi there.
I discovered today what is the reason for the strange problem I've been having with FCP X from 10.0.2+. The problem was that I just couldn't use it: I couldn't see any media in the canvas/preview pane, no matter if it was video, jpgs, psds, whatever. Trying to use or reproduce a project was just more of the same: a spinning beachball forever. At some point, from time to time, the black from the preview pane changes to a checkboard, but that was all.
This happened in 10.0.3, 10.0.4 and 10.0.5.
I tried everything, removing the events, projects, and so on. The only thing that worked was to create a new user in my machine and use FCPX there. Everything seems to work fine there. I did that yesterday at 3am. Today I saw that the colors were off in that user, and I remembered that the calibration is not setup at the system level, but for each user, so went on to change the profile to use the one I did for my screen (I have my screens calibrated frequently). Voilá, now FCPX doesn't work anymore on the new user. The only change was the profile, so I went to System Preferences, selected the old (default) profile, and now FCPX works fine.
I don't know if the problem is my profile (I created it with ColorEyes DisplayPro, I don't have anything else right now to try to create a new one) or if the issue is with FCPX itself, as I have only had problems with FCPX related to the profile. In any case, the issue is now identified in my case, and even if I don't like to work in a non-calibrated screen, that will have to do for now.
I will try some other calibration software and see if the results are the same, but I thought of sharing my findings here in case someone is still having this issue.
Tomorrow that the 5770 arrives for my Mac Pro 1,1 I'll try to run it, also with the calibrated screen, and see what happens.
HTH,
Rodrigo

I'm sorry, but I'm not sure what you mean with "the profile is downstream from ColorSync"?
I'm willing to accept that there is something wrong with the way ColorEyes DisplayPro is making the profile, although if the OS loads it and uses it and doesn't complain at all - nor any other app I use - I don't see why FCP should have issues with it. But I'm willing to try some other app to create the profile for the screen and will do as soon as I can get my hands on some other.
Between lines, hopefully I'm wrong, but I read you are telling me that FCP doesn't support having a "typical" monitor calibration, usual in printing/photography/etc workflows, but only supports calibrated output through broadcast monitors, using third party hardware? And that in the Color screen settings I must not use any "user generated" screen profile?

Possible reasons for a repository manager not displayed under KM Content

Hi,
I developed a repository manager and deployed the par file Archive uploader.
Most time after deployment, I can see immediately an instance of the repository manager under KM Content. However, sometimes, when I made some changes to the code, it doesn't appear under KM Content. The deployment log in SYS/global/config/cm/reports shows no error.
I tried to find some log in System Administration - Monitor, but found nothing.
So, could anyone tell me:
1. What might be the reason for the problem that the repository manager cannot display under KM Content after deploying the par?
2. Where can I find the log explaining why my repository manager cannot display?
Thanks,
Ray

Hi Ray,
Deploying a repository manager means a hot KM deployment, which isn't supported at all, see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb1f18be-0801-0010-ffa0-e3495f7401bc and SAP note 894884. After such a deployment, the KM is restarted, but you have some kind of "shadow KM" in memory, which leads for most things to an unpredictable behaviour.
In contrast to the documents reffered to above, also the standard KM delivery from SAP still behaves in an uncontrolled way for many issues.
That's why after a KM hot deployment, you should restart your server if you realize anything "unusual". A workaround is to debug your code and using the hot code replacement feature (which only works in some situations, but that's better than nothing...).
Hope it helps
Detlev

Need possible reason for the error!!!

The following error occured on a QA machine while testing....when clicked on a lable a dialog should come up which contains a table with data.
I am not able to reproduce this error on developmenet machines....So i need the possible reason the occurance of this error..
java.lang.NullPointerException
at javax.swing.plaf.basic.BasicTableUI.registerKeyboardAction(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.registerKey(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.registerKey(BasicTableUI.java, Compiled Code)
at javax.swing.plaf.basic.BasicTableUI.installKeyboardAction(BasicTableUI.java:616)
at javax.swing.plaf.basic.BasicTableUI.installUI(BasicTableUI.java:497)
at javax.swing.JComponent.setUI(JComponent.java, Compiled Code)
at javax.swing.JTable.setUI(JTable.java:2081)
at javax.swing.JTable.updateUI(JTable.java:2134)
at ASMSFrame.UserDialog.setTable(UserDialog.java:264)
thanks

Line number 264 of UserDialog.java is throwing a NullPointerException. You are probably calling a method on an object that does not exist.

What are the possible reasons for bill simulation fail on one day or

one period? Thanks.
ie:
Bill sim process flag is X in table ZET_SM_BIL_DAILY on a particular day or a particular short period.
Edited by: dan421 on Oct 24, 2011 11:23 PM

Hi,
There are many reason for faliur of bill simulation, can you please eloborate what error message you are getting.
Ritesh

[solved?] possible reasons for random shutdowns

Several months ago, my laptop started to suddenly shutdown for no apparent reason. Initially, I assumed it was overheating. Lenovo had a look, found nothing but replaced the thermal paste anyway, gave it back.
The issue continued so somebody from IT stuck my laptop in a server room on top of a hot computer and stress tested it for a few hours. Conclusion: can find nothing wrong, definitely not a heat problem! (Laptop never went above 65.) They ran a bunch of hardware tests as part of this, got my cable and adaptor tested etc.
Next theory: issue had only ever occurred on one level of the building (in my office) and it turned out there had been another issue with another laptop in that area and it turned out to be shutting down to protect itself due to spikes in the power supply. A UPS solved that issue. One is currently on order for me.
Meanwhile, last weekend I had the issue occur twice in a friend's house in Birmingham. Even more worrying, however, I just had it happen here at home even though I use the machine extensively here and have never seen this happen here before.
I'm guessing this rules out the environmental hypothesis although I'm by no means certain of this.
That leaves: hardware or software.
Hardware is a pain - Lenovo already ran it for 48 hours straight and found nothing. Moreover, although I have paid to extend the warranty and although they've taken my money, I've so far been entirely unsuccessful in getting Lenovo's system to recognise the extension. In any case, with the holidays and everything I'd rather be sure of what I'm dealing with before giving the machine up for an extended period of time. I cannot reliably reproduce the issue so it is hard to troubleshoot.
So I would like to know what possible software issues might trigger apparently random shutdowns.
The shutdowns are immediate. One minute I am working on some document or whatever. The next the machine is off. journalctl shows nothing except:
-- Reboot --
If it was a hardware protection feature, would this get logged?
It does not reboot - it powers off - but I always have issues with reboot since I switched to systemd. Generally, it just powers off instead. [Oh, and before anybody tries to blame systemd, the random shutdowns started before I switched to systemd.]
I've checked the RAM.
Any suggestions, however unlikely, are welcome at this point.
Last edited by cfr (2013-04-13 23:42:03)

Thanks. The adaptor, cable etc. was "PAT tested" by the electricals person in our building and they checked the fuse etc. in the plug as well. Moreover, the laptop never usually has a problem switching from AC to battery and back. My battery is more than adequate for this sort of purpose and, if the battery did run low, the laptop would automatically suspend to RAM. Also, I know if this happens because, among other things, the display is set to dim on switch to battery. When the power supply has disappeared due to a power cut or just unplugging it, the switch has always been flawless.
I've just been jiggling and shaking and rotating the laptop itself as suggested above with no effect whatsoever. I've also tried pressing around the edges of the casing just in case I'm somehow putting pressure somewhere and that's affecting things. (I assume if it was pressure due to typing or touchpad, it would be happening all the time.)
I've also just spent a while jiggling the adaptor and both parts of the cable - also with no effect.
The one thing which makes me reluctant to test sans battery is that I've read that the batteries in ThinkPads serve some sort of protective function in case of issues with the power supply and that you shouldn't use them without the battery for that reason. (Somewhere on Lenovo's site but it was months ago so I can't remember where to check the details.) In case there is an issue with the power, I'd obviously rather not fry the laptop. (But it seems weird if it happens in several places in that case...)
I'm not sure about the cold boot comment. Do you think a cold boot might help? If so, I already performed one yesterday as I opened the back to look for loose connections. So if a cold boot might help, I'll just have to see. I've done cold boots before, though, after opening it up to look for issues following shutdowns.
These issues appeared several months ago and I've reproduced the issue with the LTS kernel a while back. So if it is a regression, it has been around for a bit. I might try a live Ubuntu USB. (I don't have an optical drive.) The problem is that a negative result won't really prove anything because the issue is so random. Given that yesterday is the first time it has ever happened to me at home and that even in my office I've sometimes gone three or four days without problem, a couple of days testing won't cut it. (And will make it difficult for me to get stuff done!) It might be best to wait and try it in my office after the holidays - if it worked for, say, a week there without issue, that would strongly suggest something in my Arch setup. (Or something about the hdd, I guess.)
Somebody suggested modules so, for the record, here's output from lsmod:
Module Size Used by
usb_storage 47385 0
uas 11120 0
efivars 12441 1
fuse 69213 3
hid_generic 1114 0
usbhid 37036 0
hid 85974 2 hid_generic,usbhid
rfcomm 33792 8
bnep 8858 2
ipt_REJECT 2282 2
ip6t_REJECT 2797 2
xt_LOG 12055 6
xt_limit 1978 6
xt_tcpudp 2472 4
nf_conntrack_ipv4 7799 5
nf_defrag_ipv4 1340 1 nf_conntrack_ipv4
nf_conntrack_ipv6 7512 5
nf_defrag_ipv6 6318 1 nf_conntrack_ipv6
xt_recent 8603 12
xt_conntrack 3298 10
nf_conntrack 64101 3 xt_conntrack,nf_conntrack_ipv4,nf_conntrack_ipv6
iptable_filter 1457 1
ip_tables 16947 1 iptable_filter
ip6table_filter 1397 1
ip6_tables 18519 1 ip6table_filter
x_tables 17000 11 ip6table_filter,xt_recent,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ipt_REJECT,ip6_tables,ip6t_REJECT
nls_cp437 5954 1
vfat 10120 1
fat 48403 1 vfat
uvcvideo 72788 0
videobuf2_vmalloc 2469 1 uvcvideo
videobuf2_memops 2283 1 videobuf2_vmalloc
coretemp 6071 0
kvm_intel 124718 0
snd_hda_codec_hdmi 24529 1
videobuf2_core 24073 1 uvcvideo
videodev 100860 2 uvcvideo,videobuf2_core
snd_hda_codec_conexant 47159 1
btusb 12373 0
kvm 374014 1 kvm_intel
media 10406 2 uvcvideo,videodev
joydev 9992 0
arc4 2040 2
bluetooth 192234 22 bnep,btusb,rfcomm
iwldvm 171052 0
mac80211 426350 1 iwldvm
snd_hda_intel 26181 2
snd_hda_codec 98034 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
thinkpad_acpi 62562 0
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 75735 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7218 2 snd_pcm,snd_hda_intel
microcode 12346 0
snd_timer 18935 1 snd_pcm
nvram 5907 1 thinkpad_acpi
snd 60189 12 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel,thinkpad_acpi
rts_pstor 401665 0
atl1c 33647 0
psmouse 71952 0
iwlwifi 125182 1 iwldvm
iTCO_wdt 5256 0
iTCO_vendor_support 1930 1 iTCO_wdt
cfg80211 177109 3 iwlwifi,mac80211,iwldvm
rfkill 15605 5 cfg80211,thinkpad_acpi,bluetooth
soundcore 5443 1 snd
i2c_i801 9572 0
evdev 10267 25
serio_raw 4690 0
pcspkr 1900 0
mei 32666 0
lpc_ich 10610 0
ac 2537 0
thermal 8120 0
battery 6774 0
wmi 8380 0
nfs 127008 0
lockd 64905 1 nfs
sunrpc 186134 2 nfs,lockd
fscache 40996 1 nfs
acpi_cpufreq 5934 0
mperf 1300 1 acpi_cpufreq
processor 26856 1 acpi_cpufreq
ext4 440435 10
crc16 1360 2 ext4,bluetooth
jbd2 78802 1 ext4
mbcache 6027 1 ext4
sha256_generic 10262 2
ablk_helper 1973 0
aes_x86_64 7556 5
aes_generic 26139 1 aes_x86_64
cbc 2737 1
dm_crypt 15800 1
dm_mod 72106 35 dm_crypt
sd_mod 29560 4
crc32c_intel 1988 0
ghash_clmulni_intel 4278 0
cryptd 8742 2 ghash_clmulni_intel,ablk_helper
ahci 21361 3
libahci 20024 1 ahci
libata 167757 2 ahci,libahci
scsi_mod 133434 5 uas,usb_storage,libata,rts_pstor,sd_mod
ehci_hcd 41817 0
usbcore 150472 6 uas,btusb,uvcvideo,usb_storage,ehci_hcd,usbhid
usb_common 955 1 usbcore
i915 496012 3
video 11277 1 i915
button 4663 1 i915
i2c_algo_bit 5392 1 i915
intel_agp 10745 1 i915
intel_gtt 15660 2 i915,intel_agp
drm_kms_helper 32878 1 i915
drm 218903 4 i915,drm_kms_helper
i2c_core 20708 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
I did wonder about the watchdogs and whether I should try turning (any of?) them off. But I suspect this thought just shows my ignorance of these things.
I don't think there's a fan in my power supply - it is just a brick type adaptor between the AC and the laptop. If it is the battery, it would be odd that it only ever happens when I'm plugged into AC. (Again, I use it a lot more on AC and the problem is random so this need not mean much.) One difference between battery and AC is that laptop-mode tools is configured to disable the NMI watchdog on battery. But again, I don't understand enough of what this means to know whether this is even vaguely relevant.
My graphics is intel so I'm not using any closed source drivers from Nvidia or ATI. The driver is currently set to use the default acceleration. QT is using default rendering (X11/XRender) rather than Raster or the experimental OpenGL.

Possible reason for directory freezing...

First of all, thank you so much for reading my first post, I'm from Mexico and I'm actually working for a bank and I'm starting with this amazing world of LDAP, here's my question:
Is possible that the Directory Server 5.2 (it's running over SunOS) could get freeze by a large ammount of groups? There is a limit of groups for a LDAP under this version?

Hi,
Impact of groups on performance depends on the client access pattern...All I can tell you is that evaluating group memberships with groups containing more than 10000 members is slow.
AFAIK, you can get perf improvement about groups from the support team, but first, you would need to characterize the problem, i.e identify what LDAP request causes the problem by analysing the directory access log.
Regards,
-Sylvain

Possible Reason for "CPU Unpopulated" shown on CIMC

Hi,
We are observing the CPU status unpopulated via CIMC, any reason regarding the status, Thanks. For reference i am sharing the screenshot
Looking forward for the response.
Best Regards,
Durraze Khan

Yeah, that's the spotlight indexing process, and under normal use it only kicks in noticeably whenever there are substantial changes in the filesystem that need to be indexed.
There is a bug which I have been hit with in the past where it kicks in, but however long it's left, it never finishes and so it's always running. I forget the solution but it was a terminal procedure to remove the corrupt spotlight database, and after it's reindexed, mdimport goes away again...

Possible reason for the iMac G5 with 10.4.3 Sleep Problems

Ok first off let me say that I got this new iMac G5 20" about 4 days ago. It's wonderful. If anyone out there is holding out for the intel machines, don't wait, get a G5. It's a fantastic machine. Now on to the meat of the subject. The story goes like this; I hooked up my Plextor PVR with eyeTV to my iMac to see how well it would do (been using it with a P4 Windoze XP machine and my iBook G4 14" with no problems). It worked just great. No problems with the iMac, the PVR or any of my other addons (including the boatload of software I migrated over from the iBook). So I set up EyeTV to record some stuff while I was asleep. It's supposed to wake up the Mac, record the shows then the Mac goes back to sleep. Easy huh? Well the wakeup, record part went just fine but the Mac wouldn't go back to sleep. Perplexed (actually thrilled, this is where I have my most fun with new machines, figuring out why they aren't working correctly) I did all the standard "I can't get my Mac to sleep automatically" things. You know, blow away all the plist files that have anything to do with powermanagement and autowake, reset NVRAM from OF, reset the PRAM (3 times just like the old days), reset the SMU, blow away all the Bluetooth plist files, etc, etc. Did them all, don't suggest any, I did them all I swear, really. I've been through this kind of thing before. One big difference with this iMac. Nothing and I mean nothing would work to fix the problem. The only way the bad boy would sleep is by hitting the Power button for a second or selecting "Sleep" from the Apple menu. Hmmmm. Spent the better part of a morning reading every thread here about peoples problems like mine. One post and I mean exactly one had something I hadn't tried. I rebooted the Mac in Safe Mode (hold the shift key down while it boots until you get the login screen with the red text "Safe Mode".) I forgot that OSX even did that. Logged in as myself (normal login but still in safe mode) and low and behold the thing would sleep automatically! I repeated this (boot in normal mode, boot in safe mode) many times. Every single time the Mac would sleep from safe mode but not from normal mode. Tells me it's software not hardware. In each mode I run "Activity Monitor" and save a list of the running processes to a text file. Now compare them and shutdown each process that is different one at a time. To make this story somewhat shorter (heh) I finally found that I could consistantly make the machine sleep or not sleep by killing the "mdimport" process and restarting it. This has to do with Spotlight. To be exact, it's the process that imports Metadata into Spotlights data list (I'm no expert, have a basic understanding of this). So on a hunch I ran the terminal and entered the command to delete then rebuild Spotlights databases, "mdutil -E /". Then I let Spotlight rebuild that databases and rebooted. Guess what? The iMac sleeps perfectly now, go figure. I did this once so far and the Mac has been working correctly now for about 5 hours. I've got a feeling that the problem will come back. Especially if it's an inherent problem in Spotlight and the 10.4.3 upgrade. I don't seem to have this problem with 10.4 or earlier. Long post I know but I thought it could help someone out. Please post any comments. I'd like to know if what I did is coincidence (I really don't think so since I reproduced it many times) or not.
-joe-
iBook G4 1Gig, iMac G5 2.1 Gig, iMac 266 Mac OS X (10.4.3) iMac 266 running 10.3.6, been using Macs since the '80s

Right guy's i to have researched this problem
concerning my auto sleep problem.I started off by
following Joeaux's original post by safe
booting,noting what was running in the activity
monitor,booting normaly and again noting what was
running now.I eliminated the same processes that were
running from both boots, and then started quiting one
by one, the extra processes, from the normal boot, in
activity monitor.Once you quit a process, allow the
computer to try to go to sleep i.e set energy saver
to 1minute and wait to see what happens.I tried the "
mdimport"as of Joeaux but this was not my problem.In
my case the sleep problem was down to two
applications called N67U_ButtonManager and
N124U_ButtonManager.These are for use with my Canon
scanner.I also noted that if i left the scanner
connected to the computer this would also stop it
going to sleep,even after deleting the two
applications.Hope this helps!
Thank you now i know that those login items are for my scanner, and not logic audio i am a little less angry(Logic is now an apple application but the version I run was from the emagic days and i presumed that the button managers were from this app as it was the oldest bit of software running on my machine) By the way any apps that may cause a problem like this are more than likely simply residing in your user login items and can be disabled from there permanently as far as i can see.

BT TWIN TALK = possible, reason for SLOOOOOW inter...

Similar Messages

Maybe you are looking for