Bt vh410 is not being detedcted by any phone

I bought a bluetooth VH 410 few weeks back and now it is not being detected by any phone.
It switches on normally and then no phone is able to detect it or pair with it.
I already made sure that the phone visibility is show to all and still it is not pairing.
Please help !
Is there any way to reset it?
Thanks !

The headset LED should be blinking red and green when it has entered pairing mode, is it doing that?
The procedure to set it in pairing mode is to, while the headset is turned off press and hold the on/off key until it's starts to blink like I said above.
If you've got this right you should be able to pair it with a phone. But if you're not able to pair it with any phone in this mode it must be something wrong with the headset. In that case check if you can get it fixed within warranty by calling your local support team.
http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
 - Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • My texts are not being sent to any phones other than other i-phones

    Also, I recieve messages from other phones, but can't send them

    I just ran into the same problem and here's what happen to me:
    I changed my phone plane (with At&t) to a more suitable plan for myself and my kid's iphone and for some reason, my text message service was stopped. All other iphone users kept receiving my texts because they were imessages with will work even if I don't have a texting plan.  I contacted AT&T and it was resolved very quickly.
    Hope this works for you.

  • Check boxes are not being displayed in any list applets

    Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
    I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
    Thanks in advance

    One way that you could make it work (just tried it out again) is to use the windings font
    and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
    C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
    (depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
    There is an example file: xdo example.cfg that you rename and change accoringly.
    The font is there setup for windows 2000 as an example. Select the correct font
    path - for my XP it is:
    <font family="Wingdings" style="normal" weight="normal">
    <truetype path="C:\WINDOWS\fonts\wingding.ttf" />
    </font>
    Then you can put the symbols into your RTF template and it will be rendered.
    At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
    I am pretty sure I tried it before with 5.5.
    Didn't have the 5.5 manual with me - so I have to check what that says again..
    Hope it helps,
    Klaus

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?

    I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?

    There is no Apple here, this is a user to user forum.  When you said you restored, then you restore as NEW?
    If you restored as New and still the problem persiist, then it time to take a trip to the Apple store.

  • Anyone elses contacts not being recognized by the Phone and Message apps?

    Anyone elses contacts not being recognized by the Phone and Message apps? Updated to 5.0.1 on my 4S and this is what happened

    am having the same problem on verizon. never had this issue on my 3G...

  • My 4 digit password is not being recognized on my phone AND i am unable to restore my iphone on my old PC, can an apple store restore my phone and unlock it?

    my 4 digit password is not being recognized on my phone AND i am unable to restore my iphone on my old PC, can an apple store restore my phone and unlock it?

    Contact Apple's Customer Support - in the US, (800) 767-2775 to find out. But they will most likely tell you what you already know...it needs to be restored against the computer is was last linked with.

  • HT1689 can i use an old iphone that is not being used as a phone as just an ipod?

    Can i use an old iphone that is not being used as a phone as just an ipod?

    Yes. Instructions are here: http://support.apple.com/kb/HT3406

  • My ipod nano is not being recognized by any power source:(

    My computer and power cord for electrical outlet is not causing any response from my ipod

    Good Morning lavanyaroy,
    If your iPod nano is not being recognized by your PC or iTunes for Windows, follow the detailed instructions in the article below:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    http://support.apple.com/en-us/HT204095
    All the best,
    Judy

  • IPod is not being recognized in any sort.

    I recently updated to Windows XP Service Pack 2 and my iPod is not being recognized in iTunes and My Computer. Before the update, when I connected my iPod to the computer it would be recognized as a device plugged into the USB but not anymore. Right now I have it plugged in and it's not even charging. I tried most of the usual things to do to fix the problem but nothing is working. Please help, thank you.

    While my iPod works perfectly well on my Windows XP Desktop, my new Laptop with Vista Ultimate will not recognize the fact that it is even plugged in..
    The iPod however does recharge nicely.. What is of concern is that my desktop is not portable and not readily accessible when I want to download new music and or photos.
    Itunes appears to work well on the Laptop with the exception of not being able to access my iPod.
    Anyone have any ideas??
    XPS M1710 Dell   Other OS   Pentium Core 2 Duo c/w Windows Vista Ultimate

  • I cannot "download all" from the cloud ... it says that itunes has encountered an error and needs to shut down. I can download one song at a time. It is not being caused by any one song.

    I have the latest version of iTunes. When I am in the iTunes store and I click on purchased it will show me a list of all my purchased songs. Some of the older songs are already in my iTunes account. There is a cloud symbol by any songs that have not been download to my account. It always fails if I try to do a "download all" (at the bottom of the page) but I seem to be able to download one song at a time. These are songs that were purchased on my iPhone but I wanted to put them in my iTunes account so that I could put them on my iPod. The problem does not appear to be associated to any one song.

    I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

  • Security questions and answers are not being sent to any of my emails. i am unable to use itunes because of this. please help

    I do not know the answers to my security questions. It says the support email is being sent to my email, but I have not recieved any email. please help

    You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (95577)

  • Ipod not being recognise by any computer

    i have a 4GB nano and about a month ago it froze on me and i had to do a Menu and Enter reset to retrieve it.Since then when i try to connect the nano to any computer,a message pops up which tells me that the device has malfunction and it doesnt recognise the device.Therefore itunes dont see the ipod and i cant put any files on the ipod.Is there any solution to this problem

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Maybe you are looking for

  • Error is coming when executing the report in bex

    hai experts, any body help me in this matter. when i execute the qurey in bex its showing error message coming with popup box. Error is showing like this. "no value found" " Exception 1 when calling WB_HTML_HELP_URL_GEToccured" but when i click on "O

  • My ipod nano will not show any music on it after syncing or manuallly adding it, but the information still takes up space in ipod

    I have tried to put music on my ipod nano 3rd gen both manually and syncing it, but it never shows up after I eject my nano. The songs I put on will take up space, but the ipod says no songs. I have restored it multiple times and nothing has helped.

  • How to reset a ISE device to factory default?

    Hello guys, I just started learn Cisco ISE (TrustSec 2.0), i have my company device which that set on pre-configured configuration from my company meant configured database password. So i want to ask that how can i reset ise device to factory default

  • Tables and Rounding Errors on Board Game Gui

    Hello, So I am in a software development class , and my team and I are developing a software version of a board game that uses numbered tiles placed on a board in a somewhat scrabble-esque way. Here is a picture of the game board: [http://img90.image

  • RCU.bat is not opening in my virtual machine.

    Hi, I am trying to run the rcu.bat file my virtual machine but it is not responding. It opens on my local host, however, not on my Windows 2008 server guest OS. Please advise. I have tried the following. 1. Rebooted the system (both local & virtual)