BT Voyager 240

Hi all,
anybody got the BT Voyager 240 router? Is it new, it seems to have replaced the 205...?
Does it work anybetter with video chats/user did not respond?
PS if you want to buy one get it at
http://www.businessshop.bt.com/invt/bar114
Its cheaper than the normal BT shop
Power Mac G5 1.8 Single (900 MHz Front side bus) & iMac G5 iSight 1.9GHz Mac OS X (10.4.3)
Power Mac G5 1.8 Single (900 MHz Front side bus) & iMac G5 iSight 1.9GHz Mac OS X (10.4.3)

Hi Stuart
This says may 2004 so its not new http://www.dslsource.co.uk/downloads/BTV240/240_techspec.pdf
It does UPnP so should work.
But here it says discontinued http://www.expansys.com/product.asp?code=VOYAGER_240&asource=118595
So you will be buying old stock.
If it is old stock check the firmware is upto date http://www.voyager.bt.com/240/firmware_update.htm
Tony

Similar Messages

Need moD help employee want advice for my aunt

Hi there
In a nut shell mu grandad house has my aunts bungalow in the grounds
He has two lines coming in
One business set up for him - bb is not abled on this line
My aunts line - bb enabled but does not have a router with more than one port has the voyager 210 I recommend the voyager 240 as the hub is no good what's so ever !
There is a facts on the line stopping bb getting through this needs moving asap! I'm not even going to get into reasons bar the fact the business needs it!
At the moment we are using extension cables from next door 200 meters away with power line adaptors to get bb
Rung thd who did not listen but kept saying they would send out hub 3
Bare in mind I have told them we have already tested the hub from the White one all the way up to 3
The hubs are too powerful enough
Any advice you can give will be great and if you can get the darts removed even better! As the business can then start getting the service it is paying BT for and my aunt can finally use her bb without the constant cut outs
With regards b west

then complete the form and send to mods http://bt.custhelp.com/app/contact_email/c/4951
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Voyager SSAS 2005 SSO connection

Hi,
We are using BO Xi 3.1 and we have sso is configured for Infoview, now we are trying to configure SSO till database for Voyager (SSAS 2005), and we receieved the error message, We made change in the krb5.ini file with an entry of "forwardable = true", as well as on SSAS server, made changes for service account like spn entry and delegation for the service account but still no luck.
Here are couple of things we observed:
1) When i gave windows username and password in CMC for cube and create voyager reprot it works fine.
2) When i use SSO then it failed with error saying " An Error has occured while attempting to connect to the OLAP Server. Failed to Intialize (The component for microsoft OLE DB Provider for analysis service 2008. returned the server error (an error has encounter in transport layer; The peer prematuarly closed the connection)
3) I login to sql profiler to see the credentails it passes but when i try to create voyager with SSO it doesn't passes the windows credentails instead it passes "anonymous" login.
I opened the tech support ticket but i didn't getting much help from them.
Thanks for the help in advance.

Hello,
Sorry for my English.
Can you send the SETSPN commands you ran?
The Voyager connections, the server name you have put in capital letters and the domain name in full format?
Sorry.

Voyager Legend will not work with my laptop

I have an HP Pavilion dv6-3120us Entertainment Notebook PC with Windows 7(64-bit). I recently purchased a new bluetooth headset and am unable to get it to work with my laptop. The Previous headset was a Plantronics Voyager Pro which worked great with my laptop, all I had to do was pair it and that was that. My new headset is the Plantronics Voyager Legend and after pairing, it starts installing drivers and all but one are fine.
Bluetooth AV Ready to use
Bluetooth Remote Control Ready to use
Bluetooth AV Remote Control Target Ready to use
Bluetooth Peripheral Device No Driver Found
Bluetooth Hands-free Ready to use
I've uninstalled, reinstalled several times and it didn't help, It shows that the device is paired, but doesn't reroute audio to the headset or the microphone. It shows in audio devices but says disconnected, when I click on 'connect', nothing happens and 'set as default' is grayed out and I cannot select it. I know that there is a separate bluetooth USB adapter available, but I'm using the headset mostly for my phone (which works fine) and occasionally my laptop so I don't really want to purchase it. I've already contacted Plantronics about the issue and this was their response:
"Thank you for contacting Plantronics Technical Support.
If you are using built in blue tooth and not our blue tooth USB adapter unfortunately we cannot assist you with your built in blue tooth, Plantronics does not supply drivers, here is our statement with regards to using built in blue tooth:
If you are pairing the headset directly to your computer, the drivers that are required are for your computer's internal Bluetooth adapter. You will need the drivers supplied by your computer's manufacturer in order for you to use your Bluetooth headset as an audio device.
Different computer manufacturers and computer models will use different internal Bluetooth adapters, so you'll have to contact your computer manufacturer to get those drivers. Most major computer manufacturers have a "Drivers" or "Drivers and Downloads" page on their web site in which you can enter your computer model in order to retrieve available drivers. You can typically find the Bluetooth drivers under the "Network" category. "
I've checked for bluetooth driver updates and it says that none are available, I've also uninstalled and reinstalled the bluetooth drivers from the laptop. Sorry that this is a short novel, but I wanted to make sure to give all available details, any help or advice would be welcome. Thank you in advance.

Hi Nt_winters,
Thank you for all the information, it is very useful. I understand you are having an issue with HP Pavilion dv6-3120us Notebook with Windows 7 and your new Plantronics Voyager Legend. In the device manager are all unknown devices removed as well as the Bluetooth devices for the headset? Broadcom is recommended for Plantronics Voyager Legend headsets. Here is a link to that driver.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Switching back to my LG voyager titanium

I'm really tired of my blackberry, so i want to switch back to my LG. Anyone know if this is possiable in the middle of a contract? I want to continue to get my email on my phone, so will i need a data plan still?

Yes, you can switch back to your Voyager; a data plan is NOT required for the Voyager, but you WILL need data to get email. You have the option of PAYG at $1.99 per MB, $15 / 150 MB or unlimited for $29.99. And keep in mind that the email experience will be no where near the same as your BB.
You'll need the Mobile Email app, everything is text based (no html email) and no attachments will be viewable. The mobile email app is $4.99 a month, plus data if you are on the PAYG plan. I think it is included if you are on the $15 or $30 data plan.
HTH,

Captivate Six version 6.0.1.240 Updates not working.

Currently using a client's machine to complete a project. They are not a subscription customer but still surely released patches should work for all clients. Below are the issues encountered:
Most of the Stability items on patch for 240 that we’re already on don’t work properly
Stability
•Occasionally Adobe Captivate crashes when multiple projects are open and the library is clicked just after switching between projects. – Occasionally?? More like almost every time
•The Adobe Captivate menu becomes unresponsive at times. When you click a menu option, the option is not called. But, when Adobe Captivate is closed, the menu operation you called is carried out. This happens a lot
•Adobe Captivate workspace gets corrupted occasionally. As a result, Property Inspector and other panels do not get displayed in the workspace.
•Occasionally Adobe Captivate hangs while saving a project. This behavior is observed in all operations that involve progress bars. The progress bar gets stuck at zero percent and the operation is not completed. This happens a lot
•In some scenarios, Adobe Captivate crashes when you select multiple smart shapes and then try to resize them.
•Adobe Captivate crashes at the end of 'Additional Recording' if the project theme does not contain the Blank master slide
Please advise;
Thanks in advance.
Regards to all.

This topic explains about setting up your PC to run Captivate with fewer issues (including how to set the Run As Administrator launch option):
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/setting-up-your-computer-t o-work-with-captivate
This topic tells you all about setting up your Preferences:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-preferences

Print tpage number/total page number in a report with width more than 240

Dear all,
I need to display total page number as following code sample.
But I need to put it after position 240.
this program can print total page number if   it is placed at postion 239 or before.
WRITE: /234(10) 'Heading', 239 SY-PAGNO,'of ', '-----'.
Whenever I put 240 or more WRITE: /234(10) 'Heading', 240 SY-PAGNO,'of ', '-----'.
Total page num could not be displayed.
Please tell me the solution.
thanks
REPORT YPAGECOUNT NO STANDARD PAGE HEADING LINE-SIZE 276 LINE-COUNT 65.
    DATA L_PAGE_COUNT(5) TYPE C.
TOP-OF-PAGE.
WRITE : /234(10) 'PAGE', SY-PAGNO,'/ ','-----', ''.
   WRITE: /234(10) 'Heading', 239 SY-PAGNO,'of ', '-----'.
    ULINE.
START-OF-SELECTION.
Real list output takes place here
    DO 1000 TIMES.
        WRITE: / 'Line #', SY-LINNO.
    ENDDO.
Page count will be printed on each page here
    WRITE SY-PAGNO TO L_PAGE_COUNT LEFT-JUSTIFIED.
    DO SY-PAGNO TIMES.
        READ LINE 1 OF PAGE SY-INDEX.
        REPLACE '-----' WITH L_PAGE_COUNT INTO SY-LISEL.
        MODIFY CURRENT LINE.
    ENDDO.

Using Values Greater than 255 for the LINE-SIZE of a List
If you define a fixed column width greater than 255 using the LINE-SIZE addition in the REPORT or NEW-PAGEstatement, the following notes apply:
Type definitions: The type group SLIST defines the valid maximum value for the list width (SLIST_MAX_LINESIZE), and contains a type for list lines with maximum width (SLIST_MAX_LISTLINE).
Accessing the entire contents of a line: To read or modify the entire contents of a wide line, you can use the ... LINE VALUE addition in the READ LINE or MODIFY LINE statements. This is an alternative to using SY-LISEL that is independent of the attributes of the system field (since the length of SY-LISEL is 255 characters).
Horizontal lines: With extra-wide lists, the "ULINE." statement corresponds to "WRITE / SY-ULINE.". So, for example, "ULINE AT 5(300)." corresponds to "WRITE AT 5(300) SY-ULINE.".
Output length: You can use the length specification in WRITE (or ULINE) to extend the output length of an extra-wide list up to the value of LINE-SIZE. If you want to output a whole field that is longer than 255 characters, you must use this, even if the field itself is defined as longer than 255 characters.
Example
NEW-PAGE LINE-SIZE 1000.
DATA: F1(500) VALUE 'F1'.
WRITE: /      F1 COLOR COL_NORMAL. " Output with length 255
WRITE: /(500) F1 COLOR COL_NORMAL. " Output with length 500
Awrd Points if useful
Bhupal

Export options in Voyager

I created Voyager documents for my cubes. The tool is great in terms of its ability to report data from the multiple measures and dimensions. When it comes to Export options - The export to excel is pretty clean, but it doesn't carry the formatting to the exported file. This feature is something that our users really felt was missing. Can this feature be released as a patch or part of a service pack release? Also, the export doesn't carry the title of the report to excel or PDF (print to PDF - Data).
Thanks in Advance!!
Harish

To confirm: Column formatting like display -> Name:Caption .. .. is not being exported to excel
please refer to Note # 1345585
this behaviour will be enhanced in XI3.0 Sp3 - due end 2009.
regards,
Henry

Can I use my mac book pro with 120 volt and 240 volt power supplies? Does the power converter automatically switch, so I just need a different adapter plug?

I got my mac book pro in the U.S., but I will be travelling to where there is 240 volt power. Does the mag safe power adapter switch automatically, so I just need a converter plug, or do I need a transformer to convert from 240 to 120 volts? Thanks.

Hi,
I too bought my Macbook Pro in the US and I live in the UK (its so much cheaper in the US! No 20% VAT!)
The power adapter does work on UK 230v power. You can also get a three pin extension lead (like the 2 pin US one that came with the MBP) for about £3 with free delivery from Amazon UK.
Another tip, whne you are back in the UK, and you are switching from a PC to a Mac, get in touch with your local Apple Shop who run one to one free courses on how to use your MBP.
Hope This Helps!!

Error when trying to create a new Voyager Workspace through Infoview

Hi,
When trying to create a new Voyager Workspace through Infoview, I get the following Error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
I clicked on New Voyager Workspace & then it displays the list of connections available. When, I click on any connection , then I receive thefollowing error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
An Insight of our environment regarding this, we have an clustered environment with Voyager Installed. Platform is Windows Server 2003. We have all the required Microsoft client tools installed on the Production Servers.
This was working fine earlier. We were able to create Voyager WorkSpace at one instance of time. The problem at that point of time was the MDAS Server was not showing up in CMC, i.e as we had clustered environment, only one of the MDAS Server was showing up in the CMC. it was missing the other MDAS Server. but, at that time we were able to create Voyager Workspace.
So, in order to view the other MDAS Server in CMC, we had changed the name of the Server in CCM for both the MDAS Servers.
In detail, Server A.MDAS Server & Server B.MDAS Server- they both were not showing up in CMC. only one of them was showing up in Servers list in CMC.
So, in CCM we had changed the name of Server1.MDAS server to be Server1 &
for Server2.MDAS Server to be Server1 as well.
AFter this both the MDAS Servers were showing uo in CMC.
but, when I login into Infoview & click on new Voyagerworkspace & select a connection, I recieve the follwoing error
"An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
Request to let me know the possible steps in resolving this ASAP

Hi,
Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
It is possible that you dont have development authorization.
Also the issue could be that the system is not configured to create the objects begining with Z.
Check this with basis as well.
Thanks
Ajeet

Satellite P100-240 - Doesn't boot properly

I'm posting on behalf of a friend who has this problem, we only have contact via mobile texts :( I may not be able to immediately provide all the answers you seek to resolve this problem.
Hi,
The laptop (P100-240) turned itself off whilst playing a game 2 days ago, since then the following problems have been experianced;
Loading windows in normal mode results in instant Blue Screen (specific info unavilable). Windows in normal mode has not been accessed since this problem began.
Loading windows in safe mode worked for a while, but internet access resulted in Blue Screen aswell, for a while this problem resolved itself, safe mode no longer works to my knowledge.
The visual display appears at all times distorted, a matrix like effect. I don't know wether this effect is passive, or only during windows or startup, details on how it looks or anything very specific.
A blue screen mentioned the file nv4_mini.sys, this is an nvidia driver file for laptops as far as I know. A gfx driver update cured nothing.
The current situation is total lack of access to the desktop, I think it blue screens just after the welcome screen. I don't know what the blue screen says atm, but the disabling of memory options in the bios was recommended by something... I don't know wether the option is even available to the p100-240s bios system, googling this problem came up with mentions of disabling video caching and shadowing options in the bios as the definition of bios memory options, and that these options don't always exist.
However, my diagnosis is that the video card is just fried :( which would be a worse problem than a software or options problem as far as a quick and simple solution is concerned.
Any solutions, advice or questions? I'm struggling to find and give useful advice, and learning the situation in detail is tricky aswell.
So far a registry clean has been done, an anti-virus scan has been done, a system restore has been done, a video card driver update has been done and a bios update has been done. In that order, for what relevance that has.
Help? :\
I've seen similar problems on the internet, but only once was it a near-identical problem with the same model of laptop.

The Nvidia GeForce Go 7600 is a separate card that attaches to the bottom of the motherboard on the top left side.
The card itself has a fan/heat sink unit attached to it and measures about 3x5 inches. I have become intimately familiar with this card and the P100 in the apst few days.
Laptop worked until one day the screen went blank. Not dark black blank when its off, but rather when the backlight is on but no immage is available. The laptop starts in safe mode and also in the VGA mode. The problem can be seens even before windows starts up. There are vertical lines across the screen, they either distort color on the image (as in the toshiba welcome screen) or plainly black out letters as in the widnows start-up selection screen. Sometimes restarting after VGA mode removes these lines and system starts up normaly. Then once booted the screen goes blank either right away or in 5/10/20 minutes. I have replaced the video card and the system board to no avail.
I think I will try replacing the screen power inverter next, will see if it will help.
My unut is P100, PSPA3U-04501T
the screen is 1680x1050
GPU is GEForce Go 7600, 256 mb

Problems mounting Hitachi 7k3000 HDD in Voyager Q dock via eSATA

I have two NewerTech Voyager Q- Quad Interface SATA 2.5" & 3.5" Drive Docks http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ from OWC.com that are advertised as compatible with 3TB SATA III Hitachi drives. I am using one as a main data drive, and the other as a Carbon Copy Cloner back-up. Today I had both of them running off my Sonnet Tempo SATA Pro Expresscard 34 on my MacBook Pro, doing a CCC back up sync. I went out and when I came back the cloning had frozen. I couldn't quit anything or eject anything, and several other apps became unresponsive so I had to do a hard shutdown. Upon reboot, Disk Utility wouldn't mount either of the drives, and they both failed verify/repair and also a rebuild in Disk Genius. So I tried plugging them in via FW800, only one of the drives mounted (the closest on the daisy-chain) and Disk Utility said it appeared to be OK. The 2nd drive wouldn't mount. I am quite concerned about this as I have a lot of data on there that I cannot afford to lose. Has anyone had any experience using the Hitachi 3TB drives in external eSATA or FW800 docks or enclosures? Any opinions on the Voyager Q docks?

Welcome to the Apple discussions.
You've done some good, thorough troubleshooting.
First blush I'm thinking the hard drive isn't working, until you start it via firewire from another volume, and you see flakey results, and can't complete a boot from DVD. That would support a failing logic board.
The Apple store can send your Powerbook to the Apple Depot for repair. We recently did this, system was sent to the Apple Depot in Houston, and cost was around $325. At the Depot, they repair everything, returning it in operating order. In our case they replaced the logic board and battery. If the case is banged up or extensive replacements are required, the charge goes up from $325. Comes back with a 90 day warranty.
If you're good with computer internals, you can buy a used logic board and replace it yourself. Good instructions at http://www.ifixit.com/Guide/Repair/PowerBook-G4-Aluminum-12-Inch-1-1-5-GHz-Logic -Board/553/1

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

What went wrong in the Voyager Connection

Hi,
We installed Business Objects XI 3.1.
We have SAP BW7.1 patch5.
Only ABAP stack is installed.
Xcelisus2008 SP2, Crystal Reports2008, Business Objects Enterprise XI 3.1 SP00, SAP Integration Kit, are installed in the specified order.
BW and BO are integrated. I have admin access to the BO system.
When I try to create a Voyager connection, I face a common error.
When I log into the CMC, to create a new voyager connection, it is throwing me some error.
I tried to explain my landscape as clear as possible.
I found out that there is a need of some driver or BAPI or some Function Module to bring the data from SAP BW/BI cubes in to Voyager.
My client does not have any other system other than SAP. We have a very robust BW system and my client is looking for using Voyager on top of SAP BW.
Please suggest any solutions, on how to connect the BW and Voyager system.
I FOUND OUT IN THE FORUMS THAT THE CONNECTION FOR VOYAGER AND SAP BW/BI MIGHT CHANGE IN THE FUTURE RELEASES. BUT FOR NOW WHAT IS THE SOLUTION IN MY LANDSCAPE. I DO NOT FIND AN ANSWER FOR THAT.
CAN any one please suggest me some threads or documentation or any other source.
Thanks.
Sireesha.

Hi all,
The problem got resolved.
WHen we go to the CMC Home, and select the last option is "Voyager connections".
When we select that option, we used to get an error with the
red cross mark saying that the MDAS Client has to be installed on the server.
1. We reinstalled BO Enterprise completely on the server.
It worked out.
But there is a BAPI called OLAP BAPI which actually has all the methods to bring the data from BW/BI to Voyager.
This BAPI has been remote enabled and after the reinstallation everything worked fine.
Did not know that this was an installation issue.
But if anyone uses MSAS 2000 or 2005, I do not have any idea sorry.
But for SAP BW data sources, it was the installation which actually caused the problem.
Thank you all.

Installing wildcard certificate in a WLC (ver 7.0.240 and 7.5.102)

Is it possible to install a widcard certificate for web auth in those versions?
Is there any difference between this two versions.
Are both of them versions supporting wildcards certificates?
Here you have the log file resulting of installing the wildcart certificate in the wlc with v 7.0.240.
*TransferTask: Nov 28 11:20:51.117: Memory overcommit policy changed from 0 to 1
*TransferTask: Nov 28 11:20:51.319: Delete ramdisk for ap bunble
*TransferTask: Nov 28 11:20:51.432: RESULT_STRING: TFTP Webauth cert transfer starting.
*TransferTask: Nov 28 11:20:51.432: RESULT_CODE:1
*TransferTask: Nov 28 11:20:55.434: Locking tftp semaphore, pHost=10.16.50.63 pFilename=/wild2013_priv.pem
*TransferTask: Nov 28 11:20:55.516: Semaphore locked, now unlocking, pHost=10.16.50.63 pFilename=/wild2013_priv.pem
*TransferTask: Nov 28 11:20:55.516: Semaphore successfully unlocked, pHost=10.16.50.63 pFilename=/wild2013_priv.pem
*TransferTask: Nov 28 11:20:55.517: TFTP: Binding to local=0.0.0.0 remote=10.16.50.63
*TransferTask: Nov 28 11:20:55.588: TFP End: 1666 bytes transferred (0 retransmitted packets)
*TransferTask: Nov 28 11:20:55.589: tftp rc=0, pHost=10.16.50.63 pFilename=/wild2013_priv.pem
pLocalFilename=cert.p12
*TransferTask: Nov 28 11:20:55.589: RESULT_STRING: TFTP receive complete... Installing Certificate.
*TransferTask: Nov 28 11:20:55.589: RESULT_CODE:13
*TransferTask: Nov 28 11:20:59.590: Adding cert (5 bytes) with certificate key password.
*TransferTask: Nov 28 11:20:59.590: RESULT_STRING: Error installing certificate.
*TransferTask: Nov 28 11:20:59.591: RESULT_CODE:12
*TransferTask: Nov 28 11:20:59.591: ummounting: <umount /mnt/download/ >/dev/null 2>&1> cwd = /mnt/application
*TransferTask: Nov 28 11:20:59.624: finished umounting
*TransferTask: Nov 28 11:20:59.903: Create ramdisk for ap bunble
*TransferTask: Nov 28 11:20:59.904: start to create c1240 primary image
*TransferTask: Nov 28 11:21:01.322: start to create c1240 backup image
*TransferTask: Nov 28 11:21:02.750: Success to create the c1240 image
*TransferTask: Nov 28 11:21:02.933: Memory overcommit policy restored from 1 to 0
(Cisco Controller) >
Would I have the same results in wlc with v 7.5.102?
Thank you.

Hi Pdero,
Please check out these docs:
https://supportforums.cisco.com/thread/2052662
http://netboyers.wordpress.com/2012/03/06/wildcard-certs-for-wlc/
https://supportforums.cisco.com/thread/2067781
https://supportforums.cisco.com/thread/2024363
https://supportforums.cisco.com/community/netpro/wireless-mobility/security-network-management/blog/2011/11/26/generate-csr-for-third-party-cert-and-download-unchained-cert-on-wireless-lan-controller-wlc
Regards
Dont forget to rate helpful posts.

BT Voyager 240

Similar Messages

Maybe you are looking for