BT Wholesale Speed Test not Working?

Anybody else having problems getting this to run properly?
Will display down and up speeds but won't run the diagnostics.

For most people it will work again after trying a few times. For some people it won't work for weeks at a time, however.

Similar Messages

Bt speed tester not working

I've tried using http://speedtester.bt.com/ but get a meaasge telling me I do ot have java appelets installed. I use Mac OS X and am up to date with all software updates
and http://pbtcsc.bt.motive.com/speedtest/ but the start test buton sems inacitve.
Are these Safari issues?
I have recently been havin very variable and unreliable internet speeds and would like to be able to post the deatils here.

Hi esined,
Welcome to the forum!
Just to clarify, do you have java installed?
Can you also post up your Hub stats, so we can get more details on your broadband connection?
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

What is your fastest BT Wholesale Speed Test resul...

Hi,
Aplogies to the CL's if this is not the right forum but it definitely is speed related related. I tossed up where to post it but decided on here fuguring you will soon move it if you want to.
As the title suggests, and for a bit of fun, what is the fastest result you have got from the new BT Wholesale Speed Test ?
I'll kick off with this :-
Best regards,
dfenceman

Hi Keith,
I typed a long response but have lost it now ???
Right, I'll type it all again. You are right I am on ADSL as is the whole village. This result was obtained from the village school.
As you know, every speed test I have run on the "new" speed tester has returned a download speed in excess of my IP Profile and at times in excess of my downstream speed.
Under the County Councils cost saving, performance enhancing project the school has just had its wireless link replaced with 16 bonded copper pairs. This was projected to provide the school with 8Mbps, 2Mbps below all the other 250 odd in the county. I therefore asked the school to run a speed test to find out what it is actually getting and this was the result.
I thought it would provide a little light relief from what can be a very serious forum.
As I said in my OP I was unsure where to post it but I never expected you to move it ti Infinity, I thought it might be The Lounge. Neith of these are visited so frequently as the Speed/connection forum though.
Best regards,
dfenceman

After BIOS update Intel Speed Step not working on Satellite A500

I upgraded my Satellite A500 PSAM3E model to the newest BIOS 1.50, now the Intel speed step not working!
My CPU is always 2GHz+, I chagned Power Plan to balanced, but no change... with previous the CPU was around 800 MHz.
When I try to change Windows 7 power management and set maximum CPU performance to 50 or 80% the system freezes.

Hey Szaby59,
Which older BIOS version did you use before update to 1.50?
I also use the maximum CPU performance option for Eco mode (50%) but this does work properly.
Furthermore it would be interesting to know if you use factory settings or your own Windows installation. Normally after using Toshiba recovery disk you dont have to install any Toshiba tools anymore. Everything is preinstalled on your notebook.

Re: Only BT Wholesale speed test says 75meg

I'm getting exactly the same issue. No other website or speed test site lets me download at anything above 32Mbit but the wholesale site says 70+Mbit. I've spent hours on the phone to BT today and they have no clue what the issue is. I've had my service less than a week (but more than the 3 day sync time), and for failing to provide my service they want me to pay £300+ cancellation charges.
This is besides the fact they messed up my order in the first place delivered the wrong Home hub, then lied and said they'd ordered the correct one which never turned up and when I chased was told it was never ordered.
As far as they are concerned because their website says it's the right speed then it's not their issue.

sappsys
Run this speed tester then the further diagnostics and post all the reults including your IP profile for up and down.
http://speedtest.btwholesale.com/

E3500 - Cloud Connect Speed test not correct

I’m doing a comparison on my internet speed using various methods and the Cloud Connect Speed Test app.
First thing I noticed is the App gauge only goes to 20Mbps
I have tested various online speed tests and I get a consistent 70 – 90 Mbps.
(I work from home using multiple VoIP lines and have extreme bandwidth requirements so I’ve opted for the higher package)
Why is the Cisco Cloud App showing only 7 – 16 Mps?. The upload is inline.

Two things that I can think of. First is to go into the bios, hit the F9 key to set Setup Defaults, then hit the F10 key to save and exit. This has been known to make a difference on some systems.
Also check to see if you ahve the latest bios version. On that one the latest is 1.40. IF it isn't you might want to try updating it to the latest.
Go to the Product Support Link at the top of this page, enter in your model, then clik on the Download Tab to find the available bios files for that model. The latest is 1.40. DO NOT update the bios from within Windows. Don't do it, don't even think about doing it if you want to use your computer again. When you double click on the download you will be presented with the choice of creating a CD to flash the bios from. USE THIS METHOD. You can use a CD-RW so you don't waste a blank, but even the cost of a regular blank CD is cheap compared to the $100 that most places will charge you to fix a botched bios flash. Make sure that your battery is fully charged, installed, and the AC Adapter is plugged in just in case.
And don't forget to go into the bios and hit the F9 key to set Bios/Setup Defaults then F10 to exit and save just prior to and immediately after updating the bios.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Macbook dies after 2008-005 security update: even hardware test not working

My Macbook no longer boots after installing security update 2008-005. Behaves as if HD is dead, AND as if boots from SuperDrive are broken too.
Sequence of events:
1. 10.5.4, Software Update notifies me of update.
2. I permit it. Immediately requires a reboot.
3. Go away for several hours.
4. Upon return, I notice the Leopard outer-space background.
5. Spinning beachball when I move the mouse.
6. Go away for several minutes.
7. Return. No change. Power down computer.
OK ... by now, you may be saying that it might still have been updating and I shouldn't have interrupted it.
But since then, the machine behaves not only like the disk is dead, but I can't even get a hardware test to run from DVD.
So, to continue.
8. Start machine again. Apple boot sound. Nothing on screen.
9. After a while, flashing "folder" icon with question mark.
Since then I've attempted to boot in safe mode, verbose mode, FireWire target disk mode (against a 10.4.x box), boot from original install disk, boot into hardware test mode from original install disk. None of these things worked. I've reset the PRAM.
The only diagnostic activity of all of these that has produced any different feedback is the PRAM reset (which sounded the Apple boot sound a second time). Everything else does not work. If the HD was dead, I could understand that none of the attempts to boot into FireWire target disk mode, or to boot from DVD and then expect to see the HD mount in some way, would work. But since it doesn't even boot the hardware test from the DVD, I'm really baffled. Any ideas? Thanks.

Well, my solution was to buy DiskWarrior and copy what I could (which was a lot, thankfully) to a FireWire external disk, then reinstall. DiskWarrior reports S.M.A.R.T. status OK, so I've gone with a fresh partition in Disk Utility and successfully installed 10.4 from the original DVDs.
Have also run Apple Hardware Test and had no problems, so I've decided to trust the drive in the short term.
Unfortunately, now, 10.5 upgrade disks won't finish and guess what ... a partial install of 10.5 breaks the 10.4! So, the machine has a recognizable startup disk but justs sits in a loop rebooting itself, presumably as it hits some inter-10.4/10.5 state and gives up.
Next up I tried to restore my 10.5 from a wired ethernet connection to my Time Capsule. Having never once been able to browse my backups in Time Machine under 10.5, I was somewhat surprised to find that the 10.5 Installer was happy to let me try a restore from the Time Capsule. It crunched away until it was happy that I had enough space on my new partition, and then did what seemed a pretty instantaneous restore. The Macbook reboots and ... can't see the startup disk.
Maybe my disk really is on the way out.

Automated Composite build/test not work with non-default version

Hello,
I have a BPEL composite and I am trying to setup maven and soapUI to build, deploy, test, and upon successful test, set it as the default version. The difficulty I am having is testing the composite before it becomes the default version. I am able to hit the endpoint using the full URL with the randomly generated ID in it using soapUI (see below), but not by using the shortened URL.
Full URL: http://soabpm-vm:8001/soa-infra/services/default/Project1!0.0.12-SNAPSHOT*soa_13954572-b91f-480d-88d2-037e92083d72/bpelprocess1_client_ep
Shortened URL: http://soabpm-vm:8001/soa-infra/services/default/Project1!0.0.12-SNAPSHOT/bpelprocess1_client_ep
I tried hitting the shortened URL outside of the maven build, just using soapUI, and the response is empty. However, if I then mark this new version as default (through EM), and then mark a previous version as default (let's say 0.0.11), then the shortened URL for 0.0.12 can be successfully hit.
It seems to me then that before the shortened URL above can be used, that specific version must have been set as the default version at some point. This would make an automated maven/soapUI test of new version (but not default) quite difficult, as it would have to somehow retrieve the full URL.
Is this a bug or can it be fixed with a config setting change?
Here are the steps in the process, maven build (using the Oracle provided ant sca files):
1. Compile
2. Package
3. Deploy, not as default
4. Test the new version (using soapUI plugin)
5. If successful tests, mark new version as default
The problem is with step 4, can't determine what the full URL is and the shortened URL does not work.
Thanks
Ben

I found a similar issue in Oracle's support site, Patch 13774839 (based on bug 13569816). I will try that out and post the results here.

Client Link Test Not Working

I can not get the link test to work with any of my clients. I am using WCS 6.0.170.0,
the WISM is my DHCP server and we requires all users to use WPA 2 to connect.
For some reason I am not able to ping any of the clients or run a link test. I have not be able to figure out why. Can someone provide me with some insite?
Thanks
Mike

Hi Mike,
I posted this on my site about client link. Take a gander... Your clients need to be CCX v4 or newer
http://www.my80211.com/home/2009/11/15/cisco-wlc-linktest-how-well-does-the-ap-hear-your-client.html
If you find this helpful kindly rate the post ...

Speed dial not working

speed dials were working two days ago, but now they are not working. i have not installed or delete any fire fox settings

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

Speed Cameras - Not working UK

How do i get speed cams to work in OVI maps? i have the latest version on and have selected "safety cams" in options but when driving home last night it didn't show me where the speed cams were as i was approaching them, am i missing some thing.
Is it just for static cams, used to have Garmin on my nokia and that used to do the fixed and the mobile cams etc etc.
Any tips please?

Hi
I am having the same problem with my Nokia E72.
Don't seem to be able to get an answer anywhere, I have been looking for the past week with no joy.
Come on where are all the good guys that know how to use this tech? Please show this none tecchy grandmother how to be up to date with the speed cameras on the Ovi maps. I would like to get rid of the sat nav in my car and just use my phone. It's great at getting me around but I would really like to have the cameras working on it.
Also does anyone else know when these maps were updated? As there is a new bypass at the end of my road but it's not on the map installed on my phone v3.03 but it's on the tom tom 8.4 map I have in my tom tom one.
Thank you in advance.
Gillian57

Constant Speed + Timing not working

Hi,
I have two clips that are in the same group. I've created a motion path whereas the clips are pulled from left to right across the canvas. The 2 clips are a panormic still image that has been stiched in PS.
I've set the timing speed to "Constant Speed" but when I replay the clip the speed is not constant and it seems like the motion "fades" in at the start and "fades" out at the end.
Thanks in advance.

hi,
it sounds like there is an amount of easing in and out of the motion path. two things you can do, navigate to the keyframes window, select the keyframes and set the interpolation to linear. Or dont use a motion path and simply apply a Throw behaviour, or set your own keyframes.
hth
adam

T430s fan noise and fan speed monitor not working?

Hi, I just bought this T430s from the outlet store. I noticed a rather loud fan noise and found out s lot of compalints about the T430 model. I guess the problem I have is not as severe as those T430 users (e.g. the noise may not be as loud), but I still want to monitor the fan speed. Here's my problem:
1. none of the third party software can show fan speed, they can only show the cpu temperature, such as speedfan and aida64.
2. I tried to download the fanspeedcontrol driver from lenovo, but after installing it, the task manager does not show that the fanspeedcontrol exe. is working.
I do not want to change the fan speed, but just want to monitor the speed so that I can have a better understanding of whats going on. Does anyone have the similar problem?
Thanks.

Hi Alan, (I know this conversation was from several months back),
I don't know the answer to your questions. It seems that your fan is operational, as far as its most basic functional requirement.
I don't have experience with any particular software programs or widgets that indicate fan speed, sorry.
Do you have any view, through software, of the CPU (and GPU?) sensed temperature? Those would be very good data to observe.
If it were either disconnected or non-functional, I assume that your computer would report a POST error right after power-on (and self test).
But I just wanted to suggest here that in an unfortunate possible scenario, consider if the thermal grease on the heat sink(s) was inadequate (or was missing), then the fan would be running higher than normal (probably always spinning at a high rate), and it won't be taking enough heat away from the processor(s), i.e. inadequate cooling.
Which could be corrected by a technician (or DIY). This is pure speculation, it is not a definite, at all.
Larry

Upgrade to highest speed DSL not working; GTE no help

I have just tried to upgrade my DSl to <7mbps. I got a new router (6100G) and installed it, the Verizon (GTE hereafter) people did their thing from the "central office" and my speed grew---to about 50% of what was promised. I called their tech support # and was told that they tested their line, it had a problem, and they would have "central office" call me to set up an appointment. I later got a phone message from GTE, saying their technician needed to come to my phone to inspect their line, and leaving the same tech support number for me to call back. When I called back, of course, they told me that they could not set up an appointment but would have to have "central office" call me. This has gone on for five calls (my work takes me out of office and away from phones), and, I learned this morning that five different "tickets" have been opened on my "case" This is in spite of the fact that
I told each tech that I was calling back from an earlier message left by GTE. When I asked to speal directly with the "central office" I was told that I was not permitted to.

I had the same kind of issues..... I finally wrote a letter to Verizon corp office, BBB, and the Atty. general of my state and if memory serves the corp office is in NEW YORK.... Then BANG!!!! I had the office of the president (verizon) and the atty generals office calling me non stop.... Now prob solved.... took a while for snail mail to work its magic but it did.... I only had the issue of having to send the letters in the first place.

Failover Cluster testing - not working

Hello
We are trying to perform failover testing on OC4J clusters. We have two nodes clustered. On each node we have installed SOA suite - four OC4J instances (home, oc4J_soa, oc4j_wsm, and oc4j_esbdt).
This is how we are performing the test:
We have deployed servlet on both oc4j_soa with different application names but with same context-root. We have observed following behavior.
1) In mod_oc4j.conf file , we have "Oc4jSelectMethod roundrobin:local".
So when we hit http://<loadbalancer>/<context-root-for-servlet> it works fine in roundrobin fashion. We have set the HTML page title as node name in servlets.
And so we see Node 1 title one time and Node 2 title the other time.
2) Now if I undeploy the servlet from Node 1 and hit http://<loadbalancer>/<context-root-for-servlet> It doen't work one time (gives HTTP 500 error) and it works the other time.
ie. it is still sending one request to Node 1 and other request to Node 2.
well, it should not do this right ? if my application is down/not available on Node 1 , all request should go to Node 2.
3) Also what i have observed is , when we hit the Nodes' http url directly instead of going through the loadbalancer it crisscross the requests.
ie. http://NODE 1/<context-root-for-servlet> - this one always goes to Node 2
and http://NODE 2/<context-root-for-servlet> - always goes to Node 1
This is something weird.
Anybody has any idea , please ? I am not sure why are we getting unexpected behavior mentioned 2) and 3 )
Please let me know if you need anything about config details.
Thanks
/Mishit

2) I hope there is a Hardware LBR front ending this architecture ... If yes then HW LBR have intelligent death detection mechanisms where in if Node 1 crashes it stops serving requests to the failed node until it is back online .... so this setting is more at the LBR then at mod_oc4j.conf
3) If load balancing is configured correctly, I dont think u shud be getting this issue..
To test load balancing you can do as below:
- Ensure Virtual host configuration is done in Apache of both nodes
- Ensure Virtual host entry is added to /etc/hosts
Like on Node 1 /etc/hosts
<Node 2 IP> <Virtual hostname>
Similarly on Node 2 /etc/hosts
<Node 1 IP> < Virtual hostname>
- Give Virtual URL to your LBR guy and he will do the settings in LBR
- Bring down node 1 keeping node 2 alive & check below:
http://<virtualURL>/contextroot
http://<node2>/contextroot
- Similarly bring down node 2 keeping node 1 alive & check below:
http://<virtualURL>/contextroot
http://<node1>/contextroot

BT Wholesale Speed Test not Working?

Similar Messages

Maybe you are looking for