BT Yahoo Toolbar causing IE8 and IE9 to stop worki...

This has just started happening in the last two days, click on Internet explorer blank window opens then "Internet explorer has stopped working" box pops up. Uninstall toolbar and IE works fine, reinstall toolbar and back to not working. No changes made to system in the last week or so. Anyone have any ideas please.

Taky67 wrote:
Well I'm at a loss, checked IE Options (Security, Privacy and Advanced) against a machine that works, all the same Switched off Norton just in case and it still does not work, the best I can get is that the toolbar is displayed and then IE stops working.
If the toolbar is hanging IE with protected mode enabled, one of the associated files may be corrupted?
Try un-installing the toolbar.
Then use CCleaner as suggested before to remove unwanted files & also use CCleaner's Registry Cleanup options then reboot your PC.
When you have done that download a fresh copy of the toolbar installer (from a known good source) & try the install process again.
I hope that helps.
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Similar Messages

File does not exist: /www/public_html/null, referer: - error in log file from IE8 and IE9

I just updated an existing slide show that was created several months back. Since loading my new set of files to our web server, we keep getting the following error in our server log files when someone loads our page in IE8 and IE9:
File does not exist: /www/public_html/null, referer:
One of our programmers tracked the error to this line of code, but we're not sure what's causing it:
Muse.Utils.addSelectorFn('#slideshowu70', function(elem) { new WebPro.Widget.ContentSlideShow(elem, {autoPlay:true,displayInterval:6000,slideLinkStopsSlideShow:false,transitionStyle:'horizo ntal',lightboxEnabled_runtime:false,shuffle:false}); });/* #slideshowu70 */
Any suggestions?
Thanks!

The errors aren't showing up on the client side, only in the server access logs. Every time the page is loaded with IE8 or IE9 and the Muse.Utils.addSelectorFn with the #slideshowu70 line is hit, it generates four errors in the server access logs.
Our admin guy pulled the errors from where it was clicked on from the Adobe forum. He said it also appeared that you tested it with www added to the url (if this was when you were testing it)...
[Mon Feb 04 13:58:57 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:00 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:08 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://stingrayboats.com/
[Mon Feb 04 13:59:33 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://www.stingrayboats.com/
[Mon Feb 04 13:59:43 2013] [error] [client 121.242.198.2] File does not exist: /www/public_html/null, referer:http://www.stingrayboats.com/
The reason we find it strange is because it did not result in errors with the previous version of the slideshow. The only thing that changed this time around is that I removed some slides and added additional ones, but I noticed that there is a lot of difference in the code and even the scripts that are used. And I did copy over all of the scripts, css files, etc., so it's using all of the new source files.
I was hoping it was something that you guys had noticed if you review the access logs when you're testing. While it works perfectly on the client side, the IT guys do go through our access logs, so it would be nice to eliminate the errors.
Thanks for looking at it!

IE8 and IE9 issues

Created a site in DW CS3. Recently Made some modifications using DW CS3 and added some new rollovers. Everything previews correctly in Safari, Firefox, Opera and IE5.2 (mac).
When viewed in IE8 and IE9 I get colored outlines around some of the rollover images. This does not occur on the rest of the site, only where I added the new rollovers. I added the bottom two rollovers, but the older top two rollovers are also affected. Does anyone have any ideas?
This is a link to the page
http://www.gfigenfare.com/Services/Serv_SpPrts.html
Below is a screen shot of the page from IE9
Thanks

You have a stray <html> tag in your head.
I think you need to close off your <img> elements with a back slash at the end like this:
<img src="../Home/images_home/Contact_out.gif" alt="contact us" name="ContactImage" width="199" height="62" border="0" />
Some of your other errors occur I think, because you are using deprecated attributes. At least I think that's the case. I don't think they will muck your layout up but then, I never have used a table based layout.
One thing that you could try is to use HTML Tidy in the validator - http://validator.w3.org/ There's a check box there under "more options" that will run your code through that and it will spit out your page all neat and tidy at the end of the results page. It adds its own meta tag to show that you used it. I always remove that so people can't see I cheated. I don't like using it because for me it circumvents the whole learning thing. Easy, but no help for the future.
It is a bit of a blunt instrument I think and I would always use it with caution. It should only take minutes so what I would try is to duplicate your page in DW, rename it testpage.html or something, run the validator on your existing page, copy the whole of the code that it spits out for you, delete the exising code in your test page and paste that in and then er... test it.
What HTML Tidy will do for instance, is add in things like unclosed elements.
Martin

ADF application Issue with IE8 and IE9

Hi Everybody,
We are developing application under ADF. The application works fine in Firefox and chrome but when we open the application in IE8 and IE9 it pop up a message saying compatibility view should be turned off.Even though we turn off the compatibility view mode,The task flows that launches the jsff page are displaying blank page.In other words , I am not able to see any UI components in the page.Anybody has a clue on this?.Please Help
Thanks,
Harish
Edited by: 886523 on Oct 17, 2012 4:08 AM

Hi,
rule number 1: This is a public forum. Please don't post issues regarding internal builds. Only issue related to public builds should be posted here!
Beside of this, your post doesn't provide enough information to reproduce the problem (or a test case to try and run)
Frank

Yahoo toolbar is missing and won't reinstall

My yahoo toolbar is missing and won't reinstall. The yahoo icon is there and the space to type for the search engine is there but the search engine doesn't do anything when I try to use it. The apps/icons are all missing too. I uninstalled the toolbar and have reinstalled it 10 tomes and it won't work.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Windows 8 - Photoshop CS5.1 crashes upon startup. Error message: "Adobe Photoshop CS5.1 has stopped working.A problem caused by the program to stop working correctly. Windows will close the program and notify you if a solution is available."

Hello!
I've had the student version of the Adobe Creative Suite 5.5 Design Premium software for several years now.
When I received my Windows 8 computer I installed the software with no issue.
Last week when I tried opening Photoshop I get the following error: "Adobe Photoshop CS5.1 has stopped working.A problem caused by the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I deactivated and uninstalled the entire Creative Suite then reinstalled it. I am able to open the other programs, but still receive the same message for Photoshop.
What can I do?

I found the issue was with the Nik Filters I was using. The filters were messing with Photoshop's initializing. I uninstalled and reinstalled the filters and now Photoshop works like a charm.
It appears this forum is dead?!
Thankfully, I was able to troubleshoot on my own and figured out the problem...

I want to download a Toolbar from zynga and Firefox is stopping me

I want to download a Toolbar from Zynga and Firefox is stopping me
== This happened ==
Every time Firefox opened
== a few weeks ago

Sadly, as Call Bliss uses the built in Do Not Disturb feature, it requires that your screen be locked in order to function.
I'm hoping (and have submitted feedback) that Apple will beef up DND to work even when the screen isn't locked.

Wacom Tablet causes Apple wireless keyboard to stop working.

My Wacom tablet/pen causes my Apple wireless keyboard to stop working. While working on a photo in Photoshop using my Apple (usb) mouse to make selections the keyboard works fine. When I use the Wacom Pen to make selections, not immediately but anywhere from five to ten minutes into it, I hear what sounds like a chirp from my computer (Mac Pro) and my keyboard stops working. The command, option, control and direction keys still work but not the number and letter keys. I have to connect a spare Logitech keyboard via USB in order to continue and not loose my work. After awhile I will hear the chirp again and the Apple keyboard will start working. This will continue to occur at irregular intervals. Without the spare keyboard I've had to reboot my computer (loosing all the work on the photo) to get the keyboard working again, but only for it to reoccur. Any suggestions to fix this would be appreciated.

The Mac inherently keeps all input methods active, such that you could type alternate keys on alternate keyboards.
If you have third party add-ons that might change the way Bluetooth works, those would be the primary suspects.
Be sure all your Drivers are completely up-to-date, and batteries in battery-powered devices are still strong.
Bluetooth uses the same part of the frequency spectrum (but a different modulation technique) as cheap WiFi Routers, baby monitors, and microwave ovens. if you live in a busy apartment building, there may be very high levels of interference.

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem. I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
I am in film competition overseas and need to have deliverables in less than a month's time. I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
Any assistance would be greatly appreciated.

Still getting software freezes but found a way to mitigate for the mean time.
Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
You will want to highlight Adobe QT32 Server.exe
Right click and select "End Process Tree"
You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
Right-click to "End Process"
No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
Hope this helps until the bug is fixed.

Lenovo toolbox and fingerprint software stopped working on Thinkpad W700 Windows 7 Pro 64 bit

After installing Lenovo Updates an unknown USB device appeared in device manager. Per the instructions of a Lenovo support person I performed a system restore to a time prior to the updates. After doing that the Lenovo Toolbox and Fingerprint software would no longer work. I tried another system restore back to the latest date and that did not solve the problem. I also tried reinstalling both the Toolbox and the finger print software and they still won't work. When I try to launch either of those apps I get an error message saying that they have stopped working and that the system was checking online for a solution, with no result. It's my impression that the system restore screwed up something in the OS or the system registry that is a dependency for those two programs. The only suggestion Lenovo support could give me is to re-image the system. I would prefer to find the cause and fix that rather than reload the entire system. I would love to know what could cause these two programs to stop working when the other Lenovo utilities seem to work fine. Any help with this would be greatly appreciated.

Which version of the tool box are you using?Mine would not open after installting updates but after installating the latest version its working fine
http://www-307.ibm.com/pc/support/site.wss/MIGR-73783.html
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Adobe Flash Player 10 causes Internet Explorer 9 to stop working.

Adobe Flash Player 10 causes Internet Explorer 9 to stop working. This happens most of thge time when I play a video. Does anyone know how to fix this problem?

Try Flash Player 11.1
What is your Windows version?
What is your display adapter and device driver version (see http://forums.adobe.com/thread/945765)?

My spaces and mission control stop working shortly after startup

My spaces and mission control stop working shortly after startup. The feature to activate it on the keyboard won't work, also trying to open the app itself doesn't do anything and the multitouch two finger swipe and hpt corners I have setup don't do anything as well. Any idea on what might be conflicting to cause this?

Try moving your com.apple.spaces.plist from the preferences folder to the desktop then give it a try. To get your preference folder you will need to hold down the option key while clicking on the go menu in the finder then click on library then click the preferences folder.

My sleep button and volume button stop working. what shall i do?

my sleep button and volume button stop working. what shall i do?

Try to restore "as new ipod" without using the latest backup, in case it contains corrupt data causing your problem. How to back up your data and set up as a new device

Yogurt spilled on my macbook air and now sounds stopped working. Pls help

Hi!
So mac and yogurt were inside my bag and the yogurt's lid accidentally opened getting into my mac's charger, usb and headphones port. I tried turning it on and everything seemed fine, sounds and the heaphone port were both working but the usb port wasn't so i just wiped away the yogurt. After wiping everything I could see off, i tried connecting my mac to the power and it's working. Usb port not working tho and the sound stopped working, tried connecting a headset and still not working. Those seem to be the only problems. Right now my mac's open and standing to it's side near the heater to dry. What should I do? :(

Right now my mac's open and standing to it's side near the heater to dry.
Yes, everyone tries the "dry it out" method, doesnt work,... when it does 'work' it works for a while until corrosion sets in. Make a service call.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

User sip folder have many .cache files with 4kb and the folder is becoming full and Lync Client stops working

User sip folder have manu Mailitem&username&.cache files until folder is full and Lync client stops working.

Hi,
You can try to change the Lync Profile name. After you do it, Lync will create a new Profile. The Lync Profile path is following:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
If the issue persists, please repair Office 2013 and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

BT Yahoo Toolbar causing IE8 and IE9 to stop worki...

Similar Messages

Maybe you are looking for