BT ZXHN W151N wireless N adapter Does not work out...

Just bought a ZXHN W151N wireless n adapter direct from BT Broadband website. According to the instructions it is supposed to work straight from the box by plugging into a spare USB port as my PC is Windows 7,that is no need to run CD to load drivers. Didn't happen. Network Icon in tray shows red cross through it, no network available. Re- booted PC, aerial strength symbol appears momentarily then reverts to no network again. Any ideas as to why it doesn't work please?
Solved!
Go to Solution.

have you tried running the CD to install the drivers? if you got to network and sharing centre and then adapter settings does it shown adapter as 'enabled' - if so try running diagnostics. is windows managing your wirelss network?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Apple av adapter does not work after updating ios 5,01

apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

New ThinkPad Precision Wireless Mouse (MORFGOO) does not work

Hello to everyone,
My wireless mouse does not work. The symptoms are: The mouse is completely unresponsive, as if it had no power at all (cannot be turned on, no red laser, no interaction with CPU).
How I came to notice the problem:
I installed the mousesuite from lenovo/support/mousesuite. Then I restarted the computer. After this, I connected the USB Bluetooth Adapter to a USB port of the ThinkPad 430s 2352 CTO. I tried to turn the mouse on. No changes were noticed, Mouse still offline, no light. Tried a different set of battery & tried the wireless button. No change. Reinstalled the mousesuite. No noticeable change.
I believe the mouse might be broken. Could anyone please provide me with support as to how I could solve this? In the case that it is non-functional, how do I return it to lenovo? Is it under my one year guaranty (I bought it as an accessory on my command for my laptop)?
Thanks for your answers!
ph423

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

New Intel WIFI Wireless Network Adapter does not recognize Wireless Router

I have had a Linksys BEFW11S4 Version 4 Wireless router for quite some time. It works like a champ and I have one Laptop wired to it and a second using Wireless working just fine. Recently, I received a new ThinkPad W500 Laptop with an Intel WIFI Link 5100 AGN wireless network adapter. The older laptop that works just fine with the router uses a
11a/b/g Wireless LAN Mini PCI Express Adapter by Atheros. However, the NEW laptop with the Intel Adapter fails to connect to the Router. It will either indicate a failure while "Waiting for Association" or it will indicate a failure when waiting to "renew IP Address". Sometimes, it will show a signal strength close to ZERO (Even as the older laptop with the other adapter is showing a signal strength close to 100%) When I called Linksys support, I was told that the facts that the Router (a) works find with the wired Laptop and (b) works fine with the 11a/b/g NEtwork Adapter and (c) works fine when WIRED to the new laptop all indicate that the problem is NOT with the router at all -- but with the Network Adapter. Can anyone tell me what has to be adjusted in the Adapter settings? Right now, I am using IBM Access Connections for BOTH of the wireless laptops. I have made sure to set IDENTICAL values for SSID and WEP (128-bit) [static] password. I have also ensured that all OTHER settings are the same for the two laptops. Yet, in one laptop, there is NO PROBLEM while in the other, I can not get the Wireless Adapter to "see" the signal from the Router. TO further check this, I have [temporarily] disabled the WEP password, enabled SSID broadcast, and disabled the MAC address restrictions that I put in (so that the system would be totally "open") yet the Intel Adapter STILL did not "find" anything. In addition, when I use the "Find WIFI" feature in Access Connections, I find that SOMETIMES the network with SSID is found and sometimes, it will display "unknown network" and not pick up the SSID.
This is all very frustrating. If anyone has experience with the Intel WIFI Link 5100 AGN Adapter, I would appreciate any hints, tricks, ideas, etc.
Think you!!!!
--Zvi

I installed the LATEST version of IBM Access Connections as well as verifying that I have teh LATEST drivers for the Intel Wireless NEtwork Adapter.
What now happens is that I am able to authenticate to the Router. However, I get a failure on "renewing IP Address" -- which [according to the diagnostic message] means that the Rotuer fails to provide me with an IP address to use. Do you have any suggestions?

SOAP adapter does not work

Hello experts,
I've a provider proxy scenario where a DB table on the ECC backend system must be updated.
I used a receiver SOAP adapter with following parameters:
URL: http://<host>:<pmort>/sap/xi/engine/?type=receiver and user authentication for the ECC system.
This does not seems to work. I see nothing on the SXMB_MONI transaction on the backend system.
Then, I tried to use a receiver XI adapter with the same parameters and logon data for an SAP system.
This seems to work fine.
Please tell me what I did wrong because the SOAP adapter should work too, isn't it?
Thanks a lot
Dimitri

Hi Ravi,
I published it and created an endpoint via SOAMANAGER, but still nothing.
Now, I also get this when I check SXMB_MONI on my ECC backend system:
No implementing class registered for the interface (ABAP interface, request message ...... request message, namespace ......)</SAP:Stack>
But I generated and regenerated the proxy. Very strange.
When I check SXI_CACHE tranaction on the ECC backend system, I see this: "cache contents are obsolete".
Please advice
Thanks
Dimitri

JMS MQ adapter does not work

Hello
I have a scenarios File --> XI --> JMS (MQ) and JMS(MQ) --> XI --> File. This scenarios work fine in our sandbox, we configured the same thing in our dev PI, (JMS MQ driver deployed). However in Dev:
1) Scenario JMS(MQ) --> XI --> File works perfectly
2) File --> XI --> JMS(MQ) has runtime error in RWB:
Delivering the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.ClassCastException: class com.sap.aii.adapter.xi.ms.XIMessage:service:com.sap.aii.adapter.xi.svc\u0040com.sap.engine.boot.loader.ResourceMultiParentClassLoader\u00404da9ec16\u0040alive incompatible with interface javax.jms.Message:library:jms\u0040com.sap.engine.boot.loader.ResourceMultiParentClassLoader\u00403feef1eb\u0040alive.
Sorry \u0040 means the symbol of at, I can't put the symbol at in the message as SDN treat it as eamil addresse and thus block using it. \u0040 should be the unicode of at, but seems not working.
From the error, looks like SAP XI's class not compatible with JMS standard class. How can this be? In DEV, we have many other scenarios (non JMS), they are all working perfectly.
Can somebody tell something from the error?
Thanks
Jayson
Edited by: Jayson on Jan 30, 2009 8:30 AM

Hi Jayson,
Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
Please check that the JDK compliance level is at 5.0
Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
Set the installed JRE to the one you have mentioned JDK 5.0 update 16
Window->Preferences->Java->Installed JRE's->
Click on the add button to select the path of your JDK.
once completed click on the check box next to it.
regards,
AKD

HP bt500 Adapter does not work with Windows 10?

My HP Officejet H470wbt printer will not print wirelessly since I upgraded from Windows 7 to Windows 10. I installed it via HP Support and received a wireless adapter error during installation. The printer does work with a USB cable. Is there another adapter that can be used or will there be a software upgrade to correct this issue?

I did a work around (some what). You have to remove the G4050 completly from your computer. Reboot. Go to the HP site and download "setup_full_G4050_14-5", save it then install it. Reboot. This MAY get the scanner to work. It took me three or four times to get my scanner to scan. The next problem was, it would scan but it would not save the file. For photos I use "Corel Paint Shop Pro X" (import, Twain Aquire) it will turn on the scanner and import the picture. Then you can save it. I haven't found a solution to scan and save documents yet. But I found out it will send them to the printer.
Ya Win 8 sucks.

Enabling SSL on MQ Adapter does not work

Hi All,
I have a MQ Adapter that enqueues the message properly in the MQ without SSL. Now MQ is SSL enabled and I have got a .DER certificate with me which I presume is the Public Key of the MQ Server.
Now I have to use SSL-enabled MQSeries Adapter. The User's Guide for Technology Adapters says to set certain SSL related properties. I don't know how to get the values of these properties. So I have tried doing this.
1.) I imported the Public Key certificate (.DER file) into default weblogic keystores DemoIdentity.jks and DemoTrust.jks. (I did not create my own keystores, didn't use key password)
2.) I also imported it into the Java keystore cacerts file. (I did not send any certificates to Certification Authority)
3.) I modified the JNDI and set the SSL related properties (as given in the guide) for JNDI in Weblogic.
4.) Then I just test run my TestMQConnectivity composite and I get the following error.
Caused by: BINDING.JCA-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
at oracle.tip.adapter.mq.ManagedConnectionImpl.setupSSLSocketFactory(ManagedConnectionImpl.java:684)
at oracle.tip.adapter.mq.ManagedConnectionImpl.createPhysicalConnection(ManagedConnectionImpl.java:578)
I don't know where I should be looking for the cause of the error : JNDI, SSL config, Keystores.
Please can anyone tell me the steps I need to follow to use the SSL enabled MQ Adapter? The documentation for this is not much explanatory.
Regards,
Neeraj Sehgal

Hi Neeraj,
Please check the following BUG 8430239.
This should help you.
Regards,
Kal

Caution: A1081 Cinema (2007) to Mac Mini (2014). Adapter does not work

I bought a new Mac Mini along with the Mini Displayport to DVI adapter (MB570Z/B). Exchanged for the HDMI adapter which does work. (After testing both with the full rig at the Genius Bar.) I suspect that this is a generic problem and not specific to my original adapter. If so, the following is incorrect.
http://support.apple.com/en-us/HT3235

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff

HDMI adapter does not work on IPad 2. Not unique to this cable or to my ipad

I bought the apple branded HDMI adapter for my new IPad 2. When I plug it in it will give me a black screen and will, at most, very very sporadically flash the ipad screen for about one second then go back to black. Before assisting please read below to see what I have tried already:
I tried the cable on 2 different IPad2s and an original IPad.
I tried a different cable of the same design on 2 different IPad2s
I tried using both cables on two different tvs and using two different hdmi cables
I also tried powering off
I also tried running for-sure-supposed-to-work apps (although the IPad2 should mirror so that was unnecessary too).
I took to the Apple Store and they had no clue what was going on either. Anyone know if this adapter is just a defective product in general? What other things can I do to put my IPad on the tv...it was a large part of why I bought it.

Don't know if this will help, but this is the procedure I use to get mine to work:
Insert HDMI cable into TV port.
With TV on, select input to HDMI port on the TV that the cable is connected to.
With the iPad in sleep mode attach adapter with HDMI cable and power adapter connected to iPad.
Turn iPad on (take out of sleep mode).
This works for me every time.
Also heard that a while ago Apple produced a batch of bad HDMI adapters. This could have happened again or not all the bad ones got sent back.

Sender JMS Adapter does not work

Hi all,
We have created a sender JMS adapter with transport protocol "Access JMS Provider with JNDI". The adapter connects to destination successfully, so the connection parameters are right. However, we do not receive any message when the sender sends them.
What parameters should we set to be able to retrieve messages from the queue?
Thanks in advance,
Samantha.

Hi,
Into Communication Channel Monitoring, we get the following errors:
1. Error occurred while processing message: null. Detailed error (if any): java.lang.NullPointerException: at java.text.MessageFormat.applyPattern(MessageFormat.java:414) ...
2. Added dynamic header: DCJMSMessageSelector to XI message null which corresponds to JMS message selector: mentioned in the channel configuration
3. XI message ID corresponding to the JMS message with ID: ID:1109F6E3DF541328-00000000053E as stripped of the "ID:" marker and now has the value: null
4. XI message ID corresponding to JMS message with ID: ID:1109F6E3DF541328-00000000053E will be created with the value of JMSCorrelationID which has the value: null
Where is the problem?
Thanks again,
Samantha.

Network adapter does not work

How do I replace network adapter for Model p6370t, Product No. AZ210AV, Window 7 Professional operating system? It quit working after a power surge caused by a close lightning strike. It appears that this was the only damage. I can get on the internet using a wireless adapter and router. I would like to use a wired connection.
This question was solved.
View Solution.

You will have to purchase a PCI Express x1 network adapter card to install in one of the slots in your motherboard.
Tere are quite a few available on this web document at NewEgg.com. You should also be able to find one at any local PC or electronics store.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My wireless key board does not work but wireless mouse does?

I can not get my wireless keyboard to work again after i changed the batteries, It work sonewhat before I chaged the batteries but don't work at all now. I tried removing the thing pluged into the usb port and i pushed the connect button on the bittom of keyboard but nothing works. The wireless mouse works fine. What could be wrong?

Not sure which KB you have, but I'd check a few things.
1) You might have a dead battery or two - perhaps try batteries known to be working in another device, such as a TV remote control.
2) The KB shouldn't need to be re-synced just via a battery change. However, if you do resync - you might need to hold the sync button longer. On my TouchSmart IQ804, I usually push mine about 10 seconds or so. I can pull the USB tranceiver out of the back of the unit and put it in the side/front port, that way I can watch the LED that indicates sync/transfer better.
I know that there are some good wireless KB troubleshooting documents on the HP website - here is a link to one of them.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&lc=en&cc=uk&dlc=en
-DM (a long-time HP employee)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

RFC adapter does not work

I create a RFC Receiver CC, I got the following trace error in XSMB_MONI in receiver call adapter phase：
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">old values in cache (no lock found) - start reading from SLD</Trace>
<Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
<Trace level="1" type="T">error reading details from SLD for Adapter Engineaf.di1.usmdlsdowa122</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
</Trace>

You have to create a business system of type WEB AS ABAP. In the corresponding Technical System specify all the details of SAPR3 server on which this RFC exists.
Then import the RFC in IR and this Business system in ID.
And create your Receiver CC under this business system.
-Gouri
Award points if helpful

Streaming 3d movies to my Samsung 3DTV using AirPort express and a wireless LAN adapter has not worked. What is my cheapest option for making this happen?

I need a transfer rate minimum of 9mbps. My AirPort express and 3DTV are on different floors, so I cannot directly connect with an ethernet cable. Can I buy an older AirPort express, use it as a bridge, and connect my TV to it via an ethernet cable?

Hi rockchalker,
Thanks for using Apple Support Communities.
For 802.11n Wi-Fi base stations, creating a roaming network is by far the best choice. This will provide the best throughput between the base stations and your Wi-Fi devices.
If you are unable to build the recommended Roaming network, then a Wirelessly Extended Network is the next best option.
For more information on this, take a look at this article:
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
http://support.apple.com/kb/HT4145
Hope this helps,
Mario

BT ZXHN W151N wireless N adapter Does not work out...

Similar Messages

Maybe you are looking for