BT6500 thinks all calls are International !!!

So my BT6500 was a bit of a problem when I first set it up and ordered caller display, BT sorted it as all mobiles were going to answerphone. So all has been fine for month or so but this week all 01 and 02 numbers are coming up as international, I've had my line checked and it is fine so im stuck really, what I have done is add the people who call me that go to international as contacts and that works.
It really appears to me that BT haven't really tested this phone properly as the number of complaints on here about these phones is ever growing !!!
R1Sean

Hi R1Sean,
If this is still happening for you can you send in your details as asked for here and we'll get back to you?
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

CC thinks all apps are up-to-date

Hi There,
I've had 3 support calls with Adobe where we removed CC then reinstalled, logged in using a different CC account, and also tried a different user account on the mac. But in the end we ended up with the same issues we started with:
Either CC thinks no apps are installed or...
CC thinks the apps are up-to-date
The only thing I can think of is the way these apps were installed - becauase we have 4 macs, we downloaded the CC packager, which downloaded and made an installer. Then we used the installer to install the apps.
The apps all run fine and if we signout, CC asks us to sign in when we try to launch an app - so the issues don't seem to be lincensing or account related.
This occurs accross 4 macs running:
- 10.7 x1 mac
- 10.8 x2 macs
- 10.9 x1 mac
So it doesn't seem like an OS issue either - does anyone know how to fix this?
After several weeks of Avid and Protools licensing issues this year, we're kinda tired of managing this stuff so sorry if we're a bit short!
Any pointers in the right direction would be much appreciated.
Cheers
Ben

You probably created an invalid signature in the installation package. Well, whatever. You can always run the Creative Cloud Cleaner Tool at the cost of the apps appearing not installed at all, defeating the purpose of your customized package...
Mylenium

Power Macintosh 7500/100 thinks all floppies are locked.

My new (to me) Power Macintosh 7500/100 is thinking all disks I put in it are locked. Is there a way to fix this without replacing the drive?
Thanks,
George W.
www.apple-commercials.co.cc

This is how I clean floppy drives:
1) Remove floppy drive from the computer.
2) Remove the cover.
3) Use a can of compressed air, making sure all the loose dust is gone.
4) Use cotton swabs to reach the tighter spots, making sure all dirt is cleaned out.
5) Lubricate the mechanism and springs with 3-in-1 multipurpose oil, a silicone grease or something similar. Do not use WD-40 or white lithium grease - these won't last long.
6) Reassemble the drive and install it back into the computer.
7) Use a floppy drive cleaning diskette/kit to clean the read/write heads of the drive. Although this can be done manually with rubbing alcohol on a cotton swab, it is more safe to use a cleaning diskette because you cannot damage the drive this way. If doing it manually, please be careful and don't stretch the read/write head spring too far - otherwise, the upper read/write head will never go down again.
If you follow these easy procedures, your drive should be good as new. Good luck!

All calls are directly going to voicemail

I have no idea what has changed recently, but I am not getting any calls. I can be staring at my phone and they go directly to voice mail. HELP!!!!! what do I do?

Hi,
Go to Profiles
Select Advanced
Select Phone
Select Edit (form menu)
Scroll to bottom to "Do Not Disturb"
Change to NO.
If do Not disturb is set to yes then all calls will go to Voicemail automatically.
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Hi, I had to re install my itunes library from a hard drive to my new laptop. Now I cant sync my iphone because itunes thinks all songs are new and basically doubling all albums. Should i restore iphone or is there a better way?

hi, i had to re install my itunes library from a hard drive to my new laptop. Now itunes thinks i am trying to add new albums and saying there isnt enoug space. should i restore or is there a better way.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

RFC calls are taking too many work process -- system knock out

Hi,
I have an interface remote function, which is going to be called by a java program.
Data is going to be sent to the system, processed and sent back syncronous to the caller.
The calls are working on SAP tables, so I needed to lock and unlock the tables. The java program
is opening many parallell threads and starts them the same time.
That means, that the sap system is getting attacked by many rfc calls on the same function, with the
same user at the same time.
The system has in development 15 dialog work processes set up. If I run that with up to 15 parallell rfc calls, all is working ok!
Let me now explain the problem:
I have programmed the table lock, that it´s trying to lock the table at the beginning of the function.
If it´s not possible it tries it again. At first I have just inserted a one second wait and let that run maximum 3 times. If the table is still locked, it breaks down with an error.
But because the calls come nearly to exactly the same time to the system, the first call locks all others out, and the rest ran out of the 3 seconds and ended up with an error.
So I tried to build an endless loop, which is just ending, when the table could be locked again, or when the runtime of 5 seconds has reached. That means, it´s not waiting for a second, if the table is locked, but it´s trying again and again up to 5 seconds.
That is all ok, because sometime the table is free again and all calls are then processed alright.
BUT if I now run that with MORE than 15 rfc calls from the java program (15 dialog processes are set up), the system got knocked out! It is using all free work processes for the RFC calls and get stucked. I think, the first call is locking the table, and the got stopped by the system. And then all the others are running in the endless loop....
So, shouldn´t be there a limit for dialog processes taken by RFC calls? For example here for this user? In this case it should f.e. be set to 10 free processes with 5, which are reserved for other users...
Any advices?
The second is, how can I change the lock mechanism, that I don´t use an endless loop? Waiting for one second and doing that 3 times, is not good enough... Because all the rfc calls wait then for one second, up to 3 times, and end with an error....
Is it possible to wait for half seconds, or defined milli seconds?
Thank you for all advices!

Hi,
What I have understood is you are trying to lock the table in a loop and just checking the duration by explicitly putting wait statement.
Hope you are NOT locking the entire table rather a particular record in each lock.
No need to use explicit wait statement rather its better to let SAP thinks when to lock the table T1 when its already locked by another work process. So just set the wait parameter for the Enqueue function module as 'X' and check how it behaves. Until the table is not unlocked the process will wait.
If you see the wait parameter for the Enqueue function module is not available then create your own lock object for the table and use that. Make sure its getting dequeued else you can understand better
Cheers
Somnath

All DVDs are "Damaged?"

I have a first generation, 1.83 Ghz MacBook with a DVD/CDRW drive. Just in the last month, it seems to think all DVDs are damaged. I got the "skipping over damaged part" when watching a new movie, even though it works fine in every other DVD player I own. I needed to reinstall Leopard, and had to go to an external drive--it kept dieing on me. Likewise, an install of X-Plane took multiple attempts.
Any suggestions on what can be done?
The computer is 16 months old, so it is out of warrantee. I also hate to give it up for an extended period.

I recently bought a used (though superficially pristine) MacBook which exhibited the exact symptoms described here. I used a can of computer cleaning air to clean any potential dust off the lens in the drive. I used the long, skinny tube that comes with the can, inserted only far enough to get past the brushes that cover the door. I aimed three short "sprays" one at 90 degrees (in the center of the opening) and one at each side (about a 45 degree angle to the centerline). Since this time, the drive has worked perfectly. YMMV...just be sure not to insert the tube too far.
Walt

How i can use "don't disturb", but calls are coming without sounds

i want to use the "don't disturb" function.
but when i activate it, all call are send to my Voice-Box. But i want that the call is sign at my iphon without sound. so it is when i activate the MuteButton at the right side of the iphone

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

All Incoming calls are 'Unknown'

About 6 days ago all my incoming calls are coming in as 'Unknown'. Also my phone calls to my friends/relatives were showing up as 'blocked' or 'private'.
I was on the phone with at&t and they said all my settings were fine. They put me through to apple support and we did a reset of settings on my phone and that resolved my outgoing calls as showing up as 'Blocked/Private' but STILL all my incoming calls are showing up as 'Unknown'. VERY frustrating. What is weird though all my incoming text messages know the name of the contact...why would this not work for phonecalls. ANY suggestions at all on how to resolve? I really don't want to have to try and reset all my default settings again on my phone, but if another attempt at that is suggested I guess I'll try. Please advise.

I have a similar problem although it's only with some numbers showing up as "Unknown". I went to the local Apple store and a busy Genius said it ws an AT&T problem. So I spent an hour on the phone with an real good AT&T tech. 866-700-2105 gets you right to iPhone tech support. He said it was a iPhone issue. So I made an appointment with a Genius. We put my SIM card in a new phone - same problem. I had a person call, whose number shows up as Unknown on my phone call the Genius'iPhone. Caller ID shows the number. So we think it's my SIM card. Off to the AT&T store for a new SIM card. With a new card - same old problem. The ball is back in AT&T's court. I bet you thought there would be a solution here. Sorry.

I have a Galaxy S3 and love this phone but here at my new home which has absolutely no trees of bushes blocking anything, my phone calls are dropped ALL THE TIME and it's driving me crazy. Verizon finally said that they would come out and boost the signa

I have a Galaxy S3 and love this phone but here at my new home which has absolutely no trees of bushes blocking anything, my phone calls are dropped ALL THE TIME and it's driving me crazy. Verizon finally said that they would come out and boost the signal but haven't seen anyone in two weeks. I have called Verizon tech help for one year to get help with this, either trade phone or something. I am so frustrated! I picked Verizon for the clear calls and coverage inside hospitals and buildings but it's been terrible. I have had three of these phones replaced. I need a different model like the S4 or the S5 I think cause it's something in this model.

Verizon is quickly becoming the worst cell phone company out there. To read all of these pleas from your loyal customers is just so sad and pitiful. You need to be sued for your data overage charges that you are intentionally imploding on your customers. They have pleaded, very intelligently, with you to do something to fix the issue and you willingly have NOT. As is with my reception issue that I was promised a signal booster for two months ago, so is this issue with the data. You don't follow up and solve the issues. Therefore the courts will find you fraudulent. When I was promised by your super tech that I needed a signal booster and he was sending it out overnight at no charge to me, I was relieved that it would finally be taken care of so I wouldn't lose faith with Verizon. Well, that was two months ago now with no record of it ever being ordered or on my file anywhere. I have since called three more times with hours of conversations about that issue and two more techs have told me they were sending me a signal booster with no follow up what so ever. WOW! That's pitiful! You may not care now, oh but you will later when you lose lots of money and business.

My 3gs has stopped playing through the speakers and when the headphones are plugged in only plays through one ear? it still ring when called and everything else seems fine, whats the problem? it seems like the phone thinks the earphones are always in?

my 3gs has stopped playing music through the speakers, they play with headphones but only through one ear. It seems the phone thinks the headphones are in all the time. The ringer still works when called and i have cleaned the headphone socket the best i can without damaging the phone! Any ideas?

I had the same issue, 4s running ios8, but the plugging and unplugging the headphones did not work, BUT, when I tried plugging and unplugging from the DOCK, it started to work again. There must have been a short in the power plug, not the headphones. I also blew out the bottom power plug with computer safe airjet. Hope this one helps anyone else having the issue.

Calling an R model via a web service - "Error in raw connection", "all connections are in use"

Hi there,
I have built an R model in Azure ML using the "Create R model" module and have trained it, turned it into a scoring experiment and a web service. I am now sending new data to it to be scored from an Excel workbook, and getting it to return
the prediction to the same workbook. Sometimes (but not always) when I try to run it from the workbook I get the following error:
{"error:{"code":"LibraryExecutionError","message":"Module execution encountered an internal library error.","details":[{"code":"FailedToEvaluateRScript","target":"Score Model (RPackage)","message":"The following error occurred during the evaluation of R script: R_tryEval: return error: Error in rawConnection (raw(0),\"wb\"):all connections are in use \n"}]}}
Usually, if you just press "OK", it works, but then sometimes it comes up again (seems quite random). I have tried a bit of troubleshooting and know that when you open lots of connections (e.g. with connections()) in R this error can occur, but
I'm not sure why in this context the error is coming up. Also, before this error I was getting the error regarding "cannot change value of locked binding for 'dataset'" described here:
https://social.msdn.microsoft.com/Forums/azure/en-US/e20b8cbf-2e89-4898-b602-d2138bf8901c/cannot-change-value-of-locked-binding-for-dataset?forum=MachineLearning
and so I made the suggested fix, adding
unlockBinding("dataset", environment())
to my Create R Model's Score script. I don't know whether this has anything to do with it or not?
Could anyone offer advice of how to get round this?
Many thanks.

Hi,
I've solved the problem. For the record I added:
closeAllConnections()
at the end of the R scoring script (and at the end of another R-script I was using higher up the pipeline) and that seemed to do the trick.
Still, I'm intrigued as to why this was necessary.

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

Settings > General > Reset > Reset Network Settings
Contact the carrier to troubleshoot.

All of a sudden my iphone's display got disconnected but calls are coming in vibrate mode. I'm not able to see

All of a sudden my iphone4 display got disconnected but calls are coming in vibrate mode. I'm not able to see or take call. I'm using iOS7.1.2 Kindly help..

Hi there shadraza,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Iphone 4s all apps are disappear including setting, contacts, call icon and etc. can someone help me?

I am currently using iphone 4s , i didn't update the latest IOS 7.1 (I forgot i have updated which ios 7) . I can't go in to a particular apps, so i restart my phone. After I restart my phone, all apps are disappear including setting, contacts, and call icon and etc. can someone help me? The phone now only remain two apps. I try to search using the phone serch engine but when i click on the result, there is a message pop out as: Unsupported URL

Swipe back (right to left) to the home screens that contain the rest of your apps.
Failing that, reset the phone: hold down Sleep and Home buttons until the Apple logo is displayed. No data is lost.

BT6500 thinks all calls are International !!!

Similar Messages

Maybe you are looking for