BTE 1650 LINE ITEM DISPLAY: Add to data per line - possible solution

Hello,
I would like to populate field payment order (Pymt.order) in custom transaction FBL5N
I have read that it should be doable using BTE 1650 LINE ITEM DISPLAY: Add to data per line but I am not sure if 1650 is correct one and if its proper solution for this purpose.
Could you please advice?
Thank you in advance!
Michal

i have the same problem , i used BTE and the fields appear but without data . which table or code i will use to in FM to display data in transaction.
thanks all for help

Similar Messages

  • No line item display in FAGLL03 & FBL3N GL line Item reports

    Dear All,
    I have parked the customer invoices with normal customer recon account and with special GL indicators. The system do not display parked lines for Special GL indicators. How can i display the line item display information in FAGLL03 and in FBL3n report.
    Following settings have already been made are;
    1. Fs00 = line item display check is on.
    2. In initial screen for FAGLL03 & FBL3N Selection: Parked Items Parked items are displayed and checked.
    The  only information for parked special gl line items is get through FBL5N report only.
    Kindly suggest in there any way that we can get report from GL line Item reports???
    Regards

    Some how client do not want the functionality

  • G/L Account line item display-text column data missing-t-code faglb03

    Dear friends,
    MY client requirement like below,
    In the GR/IR Clg account no.xxxxxxxxx. the bill no was displayed in the text column. Hence we can compare the debit entry wrt to the credit entry so that the left out credit entries can be traced and booked. The vendor code was displayed against the invoice no.before upgradation. 
    But now After upgradation this facility is not available.text column data not fletching, If the text [i.e invoice no. } is not available how can we identify which vendor bill was not posted or booked. Which was in this ledger before upgradation.
    kindly help me out to sort out this issue.
    regards
    kalyanam

    Hi Cheran
    initial screen
    Double click on on Accumulated field then it will display you the line item
    Text column is displaying at line item
    kindly check the Layout if still it does not showing there
    then add this field in below Tcode then it will display
    Tcode:  OBVU
    Table : Bseg
    Field name : SGTXT
    and save it
    hope this will help you
    Thanks
    Trinath

  • Material code, decription and Qty. in GL LINE ITEM DISPLAY FAGLL03

    I need the above fields in fagll03 and fbl3n.  i have tried in Special fields configuration, but i am unable to get the above fields

    Hi,
    You can try with BTE  00001650 -     LINE ITEM DISPLAY: Add to data per line in tcode FBL3N
    To add fields in tcode FAGLL03 use BADI FAGL_ITEMS_CH_DATA.
    Regards,
    Vinod

  • Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

    Steps done:
    1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
    2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
    3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
    4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
    5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
    I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
    Please help. Thanks.
    Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

  • Profit center clearing accounts line item display

    Dear all,
    I have implemented  document splitting at  profit center level.
    The zero balance clearing account (profit center clearing account) is open item managed and also line item display tick is  put. eg both ticks are active.
    I am trying to see the line items in the account using fbl3n,fs10n etc but am not able to view the line items althought the balance of the account is  visible in fs10n.
    the message i get is 'no line item selected'.
    Pl suggest some way through which i can see the line items of the profit center clearing account.
    Regards,
    Rishikesh

    Dear Venkatesh
    I am also facing same problem, I am using T Code FAGLL03 to display Line Items for Zero Balance Clearing A/c but I am not getting line item display instead it is giving following error.
    =========================================================================
    “Account 141010, company code VALC is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 141010 in company code VALC as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
    =========================================================================
    Please do suggest me.
    Thanks in Advance
    Regards
    Ratnakar

  • S_ALR_87012993 Line items displaying problem

    Hi everyone,
    launching the report S_ALR_87012993 - Orders: Actual/Plan/Variance from period 4 to period 4 2007 I find a trouble on displaying line items of the order: the balance of internal order is corrected, in fact it's the balance of April, but when I enter in the order, the line items displayed have registration date in the year 2006, so that the line items amount is different from the one I expect.
    Using the same user on another personal computer the problem doesn't occur.
    Can anyone help me to detect the cause of the problem and to solve it?
    Thank you so much,
    Jesse

    Hi,
    The IP address is not relevant to the user.In a network,the user can log on with any system.Rather it is relevant to the Network and the system within this network.Thus every pc will have its own peculiar IP address.It is possible to place restrictions based on the IP address.
    GUI is about interface;to my knowledge,GUI has no role in this context.It is possible,you have authorization restrictions here.
    I suggest you to take the help of the technical guys in solving the problem.
    Regards,
    Ramesh.

  • Line item display for Segment Clearing GL account

    In my scenario, document splitting is activated and zero balance is set for profit centre and segment.  I have assigned a GL account for automatic posting for segment clearance for posting.  I have posted few transactions and the document shows the posting happened to this Segment Clearing account.  However, when I want to view the line items posted in this account, system does not show the line items eventhough this GL is set up with line item display.

    Thanks for the reply.  But using this tcode also, it is not possible to display the line items.  I reproduce the message issued by the system while I am trying to view the line items of this particular account:
    "Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected."

  • Line item display and sort key

    Hello,
       can anybody pls let me know how can we change layout for f-53 ad f-28 and what is the significance of using sort keys and how can we use them.
    please let me know,
    thanks

    IMG: Financial Accounting -> General Ledger Accounting -> G/L Accounts -> Line Items -> Line Items -> Line Item Display -> Determine Standard Sorting for Line Items
        (Transaction OB16)
    You can define sort keys that are used to determine the structure of the assignment number.
    Typical fields for the assignment number are posting date, document number, fiscal
    year, purchase order, cost center, document header text.
    The possible values for the sort key are saved in field TZUN-ZUAWA.
    You can define a sort key in the master record of a G/L, customer, or vendor account  (Transactions FS01, FD01, FK01)(Table Fields SKB1-ZUAWA, KNB1-ZUAWA, LFB1-ZUAWA).
    Assignment Number
    The assignment number is used as a sort criterion. For example, the list for clearing      open items (FB05) or the line item list  (FBL3N, FBL5N, FBL1N) can be sorted by this  field. Besides this the assignment number is used as a group criterium for automatic
        clearing. During document posting, the assignment number is either determined from the sort key of the account master record or you can enter it manually (a manual entry overwrites the derived value).
    Hope above clarifies your doubts..
    Regards
    Siva

  • Add additional items to line item display? (FBL1N, FBL5N)

    Hello everyone,
    I'm trying to add some "custom fields" to Customer/Vendor line item display
    which is only available in BSEG table. (new GL function)
    I could not find any BAdI or something..
    Is there any way to do this?
    thank you in advance for any comments.

    Hi,
         Try with this Menu enhancements,
    FI_ITEMS_MENUE01                                          Menu Enhancement
    FI_ITEMS_MENUE02                                          Menu Enhancement
    For the created Menu item, under that function code write the logic to get the additional data.
    Regards
    Bala Krishna

  • Customer number needed in "GL a/c line item display" for customer gl?

    Hi SAP Experts,
    while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
    How can i solve this problem?
    Plz guide me.
    I need a quick response.
    Regards,
    Biswa

    Hi,
    Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
    If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
    special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
    I hope these helps.
    Regards
    Ravinagh Boni

  • In FI Line Item Display Purchase Document Not appearing

    Dear All,
    Could you please help me, how i can get the Purchasing document Number in Line Item Report .
    Thank you in advance.
    KSK

    Hi
    You have to add Purchase Document (PO) as a special field in the line layout variant through  customizing  to view PO in the FBL3N Line layout,
    Go to SPRO Settings - **** - GL Accounting - GL Accounts - Master Records - Line Items - Line Item Display - Define Special fields for finding and sorting data"
    A message will be displayed that it is a cross client change. Presse nter
    Before adding the special field PO, the line layout variant does not have the field PO
    Click on New Entries button
    Give the Table as BSEG and Field as EBELN.
    And save.
    Assign points if useful.
    thanks
    radhika

  • Additional Field to line item display

    Hello Everyone
    I want to add two additional field ( date of entry and entry time) to GL Line item display.Can any body please share.
    Looking forward to hear from all of you.

    First try to determine if there are any user exits (screen exits actually) or BADI's which can do this.
    For finding the relevant user exits, determine the transaction code first and search on SDN for the report in which you enter the transaction code, and which will return all user exits for this transaction.
    For BAdI's there is also a program to be found on SDN.
    Next read the documentation of these user exits / BAdI's and you will be on your way.

  • PO no not reflecting in GL/ Vendor line item display

    Hi Guys,
    Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

    Hi Amit,
    You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in  Assignment field. What may be the reason and how I get the data (PO no.) in this field?

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

Maybe you are looking for