BTE AND Generic Datasource
I have a standard table REGLRO i want to find the BTE so that i can create the delta for this generic datasource, can u tell me how can i create the BTE or where to find what is the BTE that captures the changes to the Table needed.
I do not have last change date in my table so no straight delta technique applicable. help me if you any other way to make the delta at datasource level.
Thanks
Regards
Soniya
Hi,
Were U able to solve this issue?
If yes please let me know ..
thanx and regards,,
Mustafa
Similar Messages
-
Application Hierarchy in BW and Generic Datasources
Hi,
I am not able to see the updated Application Hierarchy in BW. ie with the Datasources I installed from RSA3 in the R3 system. I am successfully using then by loading them but it shows in New_Hier_root and then shows in Nodes_not_connected.
I had done the following
- in R3 - rsa5 - activated extractor,
rsa6- check extractor,
sbiw - transfer application comp hier
in BW - replicate data sources - assign - install Biz content - use it in loading
I need to create a Generic Datasource for a Y Table, again I am not able to specify an application component for the same, since it shows the unupdated applicaiton component hierarchy.
Please help
Thanks
PranabDear Ravindra,
I am not able to address that issue through that.
When i go to SM31 and go to table you suggested it
- Its attributes indicate it is transportable in R3 and in BW
Kindly help the Issue has not be addressed yet . -
View and Generic datasource in a transport request
Hi All,
I have created a view and a generic datasource by using the same in R/3. But I have saved them as local objects. Can some one please guide me through to collect them in a transport request to send them across the landscape.
Many thanks in advance...
Best Regards,
Nene.
Message was edited by:
Nene BWView: SE11 -> Goto -> Object directory entry -> Assign a transportable package
DS: RSA6 -> Transport button ... -
Business scenarios on SD and MM modules for generic datasources and enhance
Hi,
Can anybody send some documents on SD and MM module on generic datasource and on enhancements.Pl send it to my MailID:[email protected]
Thanks,
ChinnaHi,
MM Process flow:
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM:
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Transaction Codes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Also please check this links.
http://www.sapgenie.com/sapfunc/mm.htm
http://www.sap-basis-abap.com/sapmm.htm
SD Process Flow:
The sales documents you create are individual documents but they can also form part of a chain of inter-related documents. For example, you may record a customers telephone inquiry in the system. The customer next requests a quotation, which you then create by referring to the inquiry. The customer later places an order on the basis of the quotation and you create a sales order with reference to the quotation. You ship the goods and bill the customer. After delivery of the goods, the customer claims credit for some damaged goods and you create a free-of-charge delivery with reference to the sales order. The entire chain of documents the inquiry, the quotation, the sales order, the delivery, the invoice, and the subsequent delivery free of charge creates a document flow or history. The flow of data from one document into another reduces manual activity and makes problem resolution easier. Inquiry and quotation management in the Sales Information System help you to plan and control your sales.
Transaction Codes:
Inquiry - VA11/VA12/VA13
Quotation - VA21/VA22/VA23
Sales Order - VA01/VA02/VA03
Delivery - VL01N/VL02N/VL03N
Billing/Invoicing - VF01/VF02/VF03
Also please check this links.
http://www.sapgenie.com/sapfunc/sd.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sapgenie.com/abap/tables_sd.htm
Production Planning:
For example, consider a pump manufacturing plant, based on the customer requirement, planning is done for future months ( we plan for a qty on particular
date). Pump is an assembly - were main component would be manufactured in the plant and others would be procured. As PP, we are concerned only in the inhouse
manufacturing but the final assembly (considering BOM) can be done only if the procured components are available. MRP helps in planning the shortage, on
particular date based on the planned date. Work center (ex. lathe) place the components are machined/assembled (were the operation is done). Sequence of
operation is routing (lead time scheduling data is got from routing). In the MRP Run,basic or lead time scheduling (need to know when to start/finish date)
is done. On creation of the production order, system checks for which BOM and routing to be picked up (if there are many routings or BOM for that particular
finished product). Availabilty checks for material,PRT and capacity needs to be done. on release of the order, confirmation of the order can be done (on
completion of the order or after manufacturing the quantities). GI and GR have to be done.PP flow ends here
step 1: creation of master data (Material master,BOM,Work center,Routing)
step 2: Planning - can be done by Planned independent requirement (MD61), Independent requirement (MD81).
we plan for a quantity, on which date (it would be finish date).
step 3: MD04 -stock/requirement lsit (plan made can be viewed in MD04)
step 4: MRP run - MD02, PIR is converted into Planned order
step 5:Planned order to be converted production order - CO40, CO41
step 6: production order to be released - CA02
step 7: confirm the production order (order confirmation-CO15 (after which GI and GR is done)
assign pts if helpful... -
Generic datasource based on custom table and hierarchy table
Hi Gurus,
I have a doubt regarding generic datasource.
my requirement: to create a datasource with 10 fields. (7 fields from custom table and 3 fields whose values can be derived from a hierarchy table).
I have a custom table. In this table one field refers to a hierarchy table. Using this hierarchy table, we can derive values to 3 new fields.
My question is, If i create a generic datasource based on the custom table, how can i include the extra 3 fields which gets values from the hierarchy table.
Where can i write the logic to extract the values for those 3 fields from the hierarchy table.
Thanks
Regards,
Aarthi
[email protected]Hi Aarthi,
Sample code in the user exit woul be like this:
DATA: i_biw_tab LIKE BIW_MARA_S.
WHEN '<data source>'.
LOOP AT i_t_data INTO i_biw_tab.
SELECT fields
INTO <table from which you want the value
FROM <table>
WHERE <your condition>.
IF sy-subrc = 0.
MODIFY i_t_data FROM i_biw_tab.
ENDIF.
ENDLOOP.
Bye
Dinesh -
Generic Datasource with Delta and functionmodule
Hi together,
who can help me ??
Ihave created a generic datasource with function module and
delta.
the extractor runs well while i use full update and also initialization.
If i start the delta extraction, the extractor crashed with short-dump.
the message is SAPSQL_INVALID_FIELDNAME
What can i do, and what is wrong.
regards
thorsten WeissHi Roberto,
here is the code from the function-module:
FUNCTION zbw_mm_get_eket.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE DEFAULT 1000
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SBIW_BOOL DEFAULT SBIW_C_FALSE
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
INCLUDE lrsalk01.
DataSource for table EKET
TABLES: zv_mm_eket.
interne Tabelle für Bearbeitung
DATA: itab_0 TYPE TABLE OF zstr_eket WITH HEADER LINE.
TYPES: BEGIN OF typ_categ,
j_4kbwef TYPE atnam,
/afs/bwel TYPE j_4kbwef,
END OF typ_categ.
DATA: l_s_data_eket TYPE zstr_eket,
ld_cat_struct TYPE j_4kcsgr,
lt_cat_fields TYPE TABLE OF j_4kcif001,
ls_cat_fields TYPE j_4kcif001,
ls_mara TYPE mara,
l_tabix LIKE sy-tabix,
itab_cat TYPE TABLE OF typ_categ ,
ls_cat TYPE typ_categ,
h_feldsize1(8) TYPE c,"wegen Typ-konflikt im FB
h_feldsize2(8) TYPE c."wegen Typ-konflikt im FB
Auxiliary Selection criteria structure
DATA: l_s_select TYPE rsselect.
Maximum number of lines for DB table
STATICS: s_t_select LIKE rsselect OCCURS 0 WITH HEADER LINE,
s_t_fields LIKE rsfieldsel OCCURS 0 WITH HEADER LINE,
counter
s_counter_datapakid LIKE sy-tabix,
cursor
s_cursor TYPE cursor.
Select ranges
RANGES: l_r_ebeln FOR zv_mm_eket-ebeln,
l_r_ebelp FOR zv_mm_eket-ebelp,
l_r_bsart FOR zv_mm_eket-bsart.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF i_initflag = sbiwa_c_flag_on.
Initialization: check input parameters
buffer input parameters
prepare data selection
Check DataSource validity
CASE i_dsource.
WHEN 'ZDS_V_MM_EKET'.
WHEN OTHERS.
IF 1 = 2. MESSAGE e009(r3). ENDIF.
this is a typical log call. Please write every error message like this
log_write 'E' "message type
'R3' "message class
'009' "message number
i_dsource "message variable 1
' function modul was created for DS ' &
'ZDS_V_MM_EKET"!'.
"message variable 2
RAISE error_passed_to_mess_handler.
ENDCASE.
APPEND LINES OF i_t_select TO s_t_select.
Fill parameter buffer for data extraction calls
S_T_SELECT-REQUNR = I_REQUNR.
S_T_SELECT-DSOURCE = I_DSOURCE.
S_T_SELECT-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF i_t_fields TO s_t_fields.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF s_counter_datapakid = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELN'.
MOVE-CORRESPONDING l_s_select TO l_r_ebeln.
APPEND l_r_ebeln.
ENDLOOP.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'EBELP'.
MOVE-CORRESPONDING l_s_select TO l_r_ebelp.
APPEND l_r_ebelp.
ENDLOOP.
LOOP AT s_t_select INTO l_s_select WHERE fieldnm = 'BSART'.
MOVE-CORRESPONDING l_s_select TO l_r_bsart.
APPEND l_r_bsart.
ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT (s_t_fields) FROM zv_mm_eket
WHERE
ebeln IN l_r_ebeln AND
ebelp IN l_r_ebelp AND
bsart IN l_r_bsart.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE e_t_data
PACKAGE SIZE i_maxsize.
FETCH NEXT CURSOR s_cursor
APPENDING CORRESPONDING FIELDS
OF TABLE itab_0
PACKAGE SIZE i_maxsize.
LOOP AT itab_0 INTO l_s_data_eket.
l_tabix = sy-tabix.
Lesen Erstellungsdatum aus EKKO
SELECT SINGLE aedat FROM ekko INTO l_s_data_eket-sydat
WHERE ebeln = l_s_data_eket-ebeln.
Lesen Partner aus EKPA
SELECT SINGLE lifn2 FROM ekpa INTO l_s_data_eket-plief
WHERE ebeln = l_s_data_eket-ebeln AND
ebelp = l_s_data_eket-ebelp AND
ekorg = l_s_data_eket-ekorg AND
werks = l_s_data_eket-werks .
IF NOT l_s_data_eket-matnr IS INITIAL .
*A Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
CLEAR ls_mara.
CALL FUNCTION 'J_3A1_LESEN_MARA_SINGLE'
EXPORTING
i_matnr = l_s_data_eket-matnr
IMPORTING
e_mara = ls_mara
EXCEPTIONS
param_not_valid = 1
OTHERS = 2.
IF sy-subrc NE 0.
ENDIF.
*E Lesen material für Kategoriestruktur j_4kcsgr(F001 oder R002)
*A Aufsplitten Bestandskategorie
REFRESH lt_cat_fields.
CALL FUNCTION 'J_4KG_SPLIT_CAT'
EXPORTING
client = sy-mandt
csgr = ls_mara-j_4kcsgr
cat_appl = 'S'
cat_value = l_s_data_eket-j_4kscat
NECESSARY_SPECIFIED = ' '
TABLES
cat_fields_tab = lt_cat_fields
EXCEPTIONS
no_category_structure_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE."sy-subrc <> 0
Verarbeitung der Ergebnisse
LOOP AT lt_cat_fields INTO ls_cat_fields.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_SCONFIG'.
l_s_data_eket-zz_bwel_sconfig = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_CONFIG'.
l_s_data_eket-zz_bwel_config = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRY'.
l_s_data_eket-j_3abwel_country = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_COUNTRYGRP'.
l_s_data_eket-zz_bwel_coungrp = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_STOCKTYPE'.
l_s_data_eket-zz_bwel_stktype = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_ORDER'.
l_s_data_eket-zz_bwel_order = ls_cat_fields-j_4kcatv.
ENDIF.
IF ls_cat_fields-j_4kbwef EQ 'BW_CAT_QUALITY'.
l_s_data_eket-j_3abwel_qual = ls_cat_fields-j_4kcatv.
ENDIF.
ENDLOOP."lt_cat_fields
ENDIF.
*E Aufsplitten Bestandskategorie
*A Aufsplitten MAtrix
IF NOT l_s_data_eket-j_3asize IS INITIAL.
CALL FUNCTION 'J_3A_SPLIT_SIZES'
EXPORTING
matnr = l_s_data_eket-matnr
j_3asize = l_s_data_eket-j_3asize
IMPORTING
j_3akord1 = l_s_data_eket-j_3abwel_color
j_3akord2 = h_feldsize1
j_3akord3 = h_feldsize2
EXCEPTIONS
no_grid_determined = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
l_s_data_eket-zz_bwel_size1 = h_feldsize1.
l_s_data_eket-zz_bwel_size2 = h_feldsize2.
ENDIF.
ENDIF."not l_s_data_eket-J_3ASIZE is initial
*E Aufsplitten MAtrix
MODIFY itab_0 FROM l_s_data_eket INDEX l_tabix.
ENDIF."not l_s_data_eket-matnr is initial
ENDLOOP. "itab_0
An Ausgabe-Tabelle übergeben
APPEND LINES OF itab_0 TO e_t_data.
IF sy-subrc <> 0.
CLOSE CURSOR s_cursor.
RAISE no_more_data.
ENDIF.
s_counter_datapakid = s_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
regards
thorsten -
Generic Datasource--plz confirm
Hi gurus,
i have created a generic datasource but unfortunately i don't have any number, date field which i can use as delta field...so as per the document on SDN which says that by using Business Transaction Events we can get the delta capability
but i am not able to find any BTE for production orders which i can use for delta...so can somebody help on this like how ...enable the delta capability as well as plz help to find BTE so that i can use it.
thanks and regards
Neel
Message was edited by: Neel Kamal
Message was edited by: Neel Kamal
Message was edited by: Neel KamalHi Neel
Pseudo delta is not generic delta. What I had advised is you can create pseudo delta if you are not able to find date field for generic delta mechanism.
1.Add both date fields to generic datasource alongwith all other fields.
2.You have to assign this datasource to infosource in BW and map the transfer rules.
3. Create 2 infopackages for this -one for CREATED ON - will load new records created yesterday & other for CHANGED ON - will load changed records yesterday.
4. schedule both these infopackages to load daily.
Also want to re-iterate the fact that this approach is not recommended over creating a delta enabled generic datasource. But in abscence of date field for generic delta mechanism.
Hope this helps
Regards
Pradip -
Generic datasource with Delta queue
Hi All,
I 've created a generic datasource on prices tables A* and KONP. Next, I used HowTo document "create generic datasource that uses delta queue", finding the right BTE that could catch prices modification. Up to this point, everything works fine.
I've extracted an Init delta to BW and now, on R/3, in RSA7, I can see a delta queue for my generic datasource.
When I modify price conditions in VK12, BTE works fine and I can see the counter in RSA7 increasing. I also can see new entries in table TRFCQOUT with status READY. (either in SE16 or in SMQ1 )
The problem is :
- in RSA7, if I want to display the posted data, system returns an empty list (whereas the counter is different from 0)
- when I run a delta InfoPackage, no data is sent to BW, but in table TRFCQOUT, status has been changed to READ for entries that previously had status READY (and old entries that had status READ due to a previous delta upload are deleted)
Does anyone has any idea about the reason of the issue ?
Thanks for any help
AJSure, I can.
The problem was in the specific coding that update the delta queue : not all the fields were updated and some of these fields were used as selection criteria in th delta infopackage...
in RSA7, when you try to see the data in the queue, the system only shows you the records that match the selection criterias of your delta IP...so in our case, because of those empty fields, no records were selected...
AJ -
Error while transporting Generic Datasource in R/3
Hi All,
I have created a generic datasource(R/3) on a view. As it was in $TMP, I have assigned the datasource, ZABCD, and the view, ZVIEW to a devlopment package and also to a transport request. I released the Transport request and when I tried to import it into Q, it throwed me an error with below messages:
Extract structure ZOX**** is not active
The extract structure ZOX**** of the DataSource ZABCD is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
BC-BW (SAP Business Information Warehouse Extractors)
The extract structure ZOX**** is the structure used by the datsource. I forgot to assign that to the earlier TR and I think the error is because the structure is missing in the TR. Am I correct?
How should I deal with it now? DO I need to create a new TR with this structure alone as the earlier TR is already released?
Thanks,
RPK.As you comment it is possible error was not include the structure in earlier TR.
You can create, in se09 or se10, an empty TR. In these transactions you have a buttoun with a box drawed. Set focus on your new empty TR and push button.
Add object from TR transported with error and the missed structure. -
Generic DataSource using InfoSet on BI 7.0
Hi gurus,
I need to extract data from a InfoCube through a generic DataSource. I have created an InfoSet Query based on this InfoCube and I have noticed this kind of InfoSet is not the same that is used by Tcode RSO2.
Does anybody know if there is any way to get this vai generic DataSource?
I need to get data from Infocube because de Delta Control must be the package number.
Thanks in advance,
Silvio Messias.
P.S.: The version of my environment is 7.0.Hi Ashok,
Into the Tcode RSO2 (Generic DataSource) I have the option to collect data from an InfoSet. This InfoSet must be created through Tcode SQ02, right?
I woult like to get data from a Infoset Query based on InfoCube, created through RSA1 on BI 7.0.
Is there any way to do it?
Thanks for your help,
Silvio Messias. -
Generic datasource creation in IS-HTCM
Gurus
Has anyone worked with IS-HTCM on CRM? and creating of reports with HTCM as source system?
We want to create a few generic Datasources ....BWA1 is one option and RSO2 is the other...But can the BWA1 concept of CRM be tried in HTCM as well? or do we have to resort to RSO2?
Thanks in advance
Regards
PrakashHi Prakash,
for generic datasources the transaction will be rso2 in all systems.
Siggi -
Generic datasource by function module to fetch data from multiple tables?
I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
* Fetch records into interface table.
* named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.Thanks
IF IT_999[] IS INITIAL.
SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A999 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
WHERE
* A~KNUMH = IT_999-KNUMH AND
( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
* A~DATBI >= SY-DATUM AND
LOEVM_KO = ''.
SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A999 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_999
WHERE
* A~KNUMH = IT_999-KNUMH AND
A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
* DATBI >= SY-DATUM AND
LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A997 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_997
WHERE
* A~KNUMH = IT_997-KNUMH AND
A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
* DATBI >= SY-DATUM AND
LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
TABLE TP_DATA
FROM A996 AS A
INNER JOIN KONP AS B
ON A~KNUMH = B~KNUMH
INNER JOIN MARA AS C
ON A~MATNR = C~MATNR
* FOR ALL ENTRIES IN IT_996
WHERE
* A~KNUMH = IT_996-KNUMH AND
A~KSCHL = 'ZPRB' AND
* DATBI >= SY-DATUM AND
LOEVM_KO = ''.
ENDIF.
SELECT MATNR "u7269u6599u53F7u7801
MEINH "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
UMREZ "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
UMREN "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
FROM MARM
INTO CORRESPONDING FIELDS OF TABLE IT_MARM
FOR ALL ENTRIES IN TP_DATA
WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
IF TP_DATA-KPEIN NE 0.
TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
ENDIF.
IF TP_DATA-KSCHL = 'ZPRA'.
* TP_DATA-MEINH = 'ZI'.
* TP_DATA-KSCHL = 'B4'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ENDIF.
ELSEIF TP_DATA-KSCHL = 'ZPRB'.
* TP_DATA-KSCHL = 'L0'.
* TP_DATA-MEINH = 'ZI'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ENDIF.
ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
* TP_DATA-MEINH = 'ZI'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
ENDIF.
ELSEIF TP_DATA-KSCHL = 'ZPR3'.
* TP_DATA-KSCHL = 'B2'.
IF TP_DATA-KMEIN = 'ZI'.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ELSE.
READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
* READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
* * WA_MARM2-UMREZ / WA_MARM2-UMREN.
TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
ENDIF.
ENDIF.
TP_DATA-MEINH = '01'.
MODIFY TP_DATA.
E_T_DATA-MATNR = TP_DATA-MATNR.
E_T_DATA-KSCHL = TP_DATA-KSCHL.
E_T_DATA-KHETR = TP_DATA-KHETR.
E_T_DATA-KBETR = TP_DATA-KBETR.
E_T_DATA-KMEIN = TP_DATA-KMEIN.
E_T_DATA-DATAB = TP_DATA-DATAB.
E_T_DATA-DATBI = TP_DATA-DATBI.
APPEND E_T_DATA.
CLEAR WA_MARM1.
CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM -
Problem in creating a generic datasource with infoset
Dear Expert,
I have to create a generic datasource with infoset. I linked the infoset with a test program below. In the program, I have one selection option, which is s_order. After creating an infoset and a datasource, this selection option 'SELECT_S_ORDER' is added to my extract structure. However, after try filtering with this SELECT_S_ORDER, it doesn't filter data at all. Why? I want to filter data with my s_order.
REPORT ZBI_DS_TEST.
tables: vbak.
* DATA
field-symbols: <vbak> type vbak.
data: t_vbak type table of vbak,
w_vbak type vbak,
t_vbak2 type table of vbak,
w_vbak2 type vbak.
* SELECT-OPTIONS
selection-screen begin of block b1 with frame title text-001.
select-options: s_order for vbak-vbeln.
selection-screen end of block b1.
start-of-selection.
* <Query_head>
perform sub_select_data.
loop at t_vbak into w_vbak2.
move-corresponding w_vbak2 to vbak.
* <Query_body>
endloop.
*& Form sub_select_data
* Select data
FORM sub_select_data .
select *
into table t_vbak
from vbak
where vtweg = 'IP'.
ENDFORM. " sub_select_dataWhat do you mean by linking program with infoset?
Do you get the field in your RSA3 Tcode? -
Delta issue on a Generic Datasource
Hi
I had a Generic Datasource on a Z table.
The Z table had a Date field on which Delta is based.The Postings are performed manually.
How to solve the delta issue in the below scenario.
Ex; A user made a manual posting with a date 09AUG2010 today and delta is extracted to BW.
But tommorow a used made another posting with a date 14JULY2010....
Currently that record is not being extracted....how can i resolve this
ThanksHi,
Once the data source is created you will extract the data till that date and as the delta is set it will fetch the newly updated records .But i dont think one can post with the back dates in R/3 side.
If i'm not wrong if you are asking regarding record got missed out them wht need to be done?
Then do the repair full request and pull the missed delta records and it wont effect the delta settings.
Regards
KP -
Dear All,
I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
AFKO--AUFNR = MSEG--AUFNR
AFKO--PLNBEZ = MARA--MATNR
I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
See screen shot as well:
But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
Other warning messages are as follow:
Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Following is the screen shot of error message:
1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
2. What should I do to resolve the above warning and error messages?
I will appreciate your reply.
Many thanks!
Tariq AshrafHi Vipul,
as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
As per the table the reference feild is HWAER. This should have been used in place of FWAER.
Try mentioning this in your view and this should work.
Also I am a little enthusiastic to know, what are you trying to get from the datasource.
If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
"BAPI_COSTESTIMATE_ITEMIZATION".
Hope this helps.
Naveen.A
Maybe you are looking for
-
Why do I get this window on exiting CS5
Hi all, Using Vista Ultimate SP2 x64. No problems with install and program functions perfectly until shut down. When finished working on photos and close CS5 either with the 'Big Red X' or 'Exit' from the drop down menu I get this window I know it st
-
Display issues on mid 2009 Macbook Pro
I have had a recent intermittent display issue on my Macbook pro. It started a few months ago and is not a constant issue. External displays are fine so it seems to point to a connection between grahpics card and the 13" screen. You can see an image
-
Dock won't hide/show after Tiger security update
I installed the Dec 27 Tiger security update last night (via SW update) and now the dock is behaving badly. I had it set to automatically show/hide, but it would not show anymore after the update. I always install sec updates, so I did also do the pr
-
I have a situation where we have to transfer an CREMAS idoc,along with it I have to transer Contact Person Details( like Telephone no, Mobile no,fax, email etc). I have used the ADR2MAS message type (Idoc) to transer these details based on change poi
-
I have been getting my email in duplicate in MacMail for the past week. I haven't changed any settings on MacMail. My server is Verizon/Yahoo. How can I get it to stop?