BTF Editor - where to find it?

Hi,
Thomas Jung posted a weblog recently on the marvels of something he calls the "BTF editor". I've tried to find this brand new feature, but have failed so far. Could anyone provide me the menu path or transaction code to start this thing?
Naturally, help.sap.com does not come up with anything related to "BTF"... but that's as you would expect, or...?
Trond

> ...help.sap.com does not come up with anything
> ... but that's as you would expect, or...?
Of course, I am the first to admit that often there are bits and pieces of new features that are just not documented in the heat of the moment. These "trivial" aspects (from developer's viewpoint) are left for last and then forgotten. We fight against this everyday.
But there is also another reason, which is equally, if not more, relevant for many of the situations we see. Due to "market driven" requirements (means we liked the ideas:), we are often forced to develop features into a specific service pack or another. Typical example design2003 and phtmlb library.
But the documentation is closed in a very early stage, usually within the first few service packs. And thereafter it is never updated again. Even although we make changes in docs, these are only publishes with next major release.
In case of this control, I do not know the true story, as it was developed by an expert in another group.
bye, brian

Similar Messages

  • BTF editor

    Hi,
    Thomas Jung posted a weblog recently on the marvels of the "BTF editor". I've tried to find this new feature, but have failed so far. Could anyone provide me the menu path or transaction code to start this thing?
    Sometimes the most beautifully complex and feature-full articles fail to mention the first fumbling yet mandatory steps; probably what my old maths teacher used to call "intuitive" to us bewildered students...
    Trond

    Do you mean where do i find the BSP application BTF_EXT_DEMO?
    If yes go to transaction <b>SE80</b>-> from the dropdownlist box choose <b>BSP application</b> and in the input field type if <b>BTF_EXT_DEMO</b> and then click on the <b>display button</b>.
    Does this answers your question or were you looking for something else?
    Regards
    Raja

  • Where to find the log file

    Hi,
    I am gettting the following runtime portal error and do not know where to find it.
    I have searched in my c drive but nothing has been found.
    Do you guys have any idea where i can locate this error log ??.
    Runtime error portaal
    Fout opgetreden bij verwerking opdracht voor :
    iView : pcd:portal_content/com.getronicspinkroccade.GetronicsPinkRoccade/com.getronics.civision.CiVision/com.getronics.civision.civga.civga/com.getronics.civision.civga.iViews/com.getronics.ExampleOneIntl
    Naam component : WorkShopInl.default
    Error occurs during the rendering of jsp component.
    Exception id: 10:28_12/10/05_0005_3628850
    See the details for the exception ID in the log file

    Log and trace messages are written in <installation_path>j2eeclusterserver0log<b>defaultTrace.trc</b>. But it's very hard to read this file's content with a text editor... So you should use the LogViewer utility. You can use either the standalone or the integrated LogViewer that you can find in <i>J2EE Visual Administrator -> Server XX -> Services -> LogViewer</i>. Have a look at this weblog for learning how to use it:
    Netweaver Portal Log Configuration & Viewing (Part 2)
    Davide

  • Crystal Reports XI - Where to find the Merge Module and the Install Shield?

    Hi,
    I'm using CR XI with Delphi 2006 and I'm having problems with the client side instalation of the program.They say I have to install the Merge Modules through an Install Shield programs.
    Where to find this and how to use?
    Thanks!

    Hi,
    Install shield is a part of MS Windows not with the BusinessObjects so I was not able to find any BO document on it.
    I have searched over the internet and found some useful links about Install Shield for Windows:
    http://gormanonline.com/blogs/msidle/archive/2008/05/02/basic-introduction-to-installshield-and-windows-installer.aspx
    http://en.wikipedia.org/wiki/InstallShield
    Microsoft Windows includes registry-activated logging services to help diagnose Windows Installer issues. This article describes how to enable this logging service.
    Open the registry with Regedt32.exe and create the following path and keys:
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
    Reg_SZ: Logging
    Value: voicewarmup
    You can use this example:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftwindowsInstaller]
    u201CLoggingu201D=u201Dvoicewarmupu201D
    The letters in the value field can be in any order. Each letter turns on a different logging mode. Each letteru2019s actual function is as follows for MSI version 1.1:
    v Verbose output
    o Out-of-disk-space messages
    i Status messages
    c Initial UI parameters
    e All error messages
    w Non-fatal warnings
    a Start up of actionsr Action-specific records
    m Out-of-memory or fatal exit information
    u User requests
    p Terminal properties
    + Append to existing file
    ! Flush each line to the log
    u201Cu201D - Wildcard, log all information except for the v option. To include the v option, specify u201C/lvu201C.
    Once activated, the log files that are generated may be found in your %TEMP% directory.
    Hope this will give you a clarification about Installation Shield for Windows.
    Regards,
    Deepti Bajpai

  • Where 2 find java file that implements the subscription email notification?

    Hello KMC Gurus,
    I saw a reply of Patricio linking to an article relating to "How to customize mail notifications?".
    In that article I was able to see how to change the XML & XSL files and their locations.
    Can anybody tell me where to find this java/class file relating to this mail notifications?
    FYI, the link to the article is as below
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/90626697-0901-0010-2ca7-86e2a50ce70d
    Author is Darin Krasle.
    best regds,
    Vedu

    I've just installed JAVA into my computer.
    Then I found a folder called "Java 1.4.2 SDK" or
    something like that. but in the folder there wasn't
    any .exe file to run JAVA, os i would like to know how
    do i run JAVA after i installed it?
    Also i am runnung Java in Windows XP with SP1
    I think those information might help.Follow this link and do what it says. Generally, you do not need an IDE to run java, just a text editor and a DOS prompt :)
    http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html
    Alpha

  • I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

    I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
    TheOne

    You need a DATA service enabled by your carrier to be able to send e-mail via thier network.  Do you have a data plan with your carrier ?  If so - is it enabled ?
    Can you access internet thru your network (not wifi) ?

  • Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?

    Hi Experts,
    do anybody knows Where to find Crystal Report Formats for SAP B1 8.8 (India Localization) ?
    For example
    Sales Register
    Purchase Register
    Journal Register
    Sales Analysis - Crystal Report
    Purchase Analysis - Crystal Report
    Check Register - Crystal Report
    Production register
    Pending Sales Order
    Outstanding Receivable
    Outstanding Payable
    BankBook
    CashBook
    General Ledger
    BP Ledger (Customer / Supplier)
    Trial Balance
    Balance Sheet
    Profit & Loss Statment
    Cash Flow statment
    Excise reports
       RG 23 A Part I
       RG 23 A Part II
       RG 23 C Part I
       RG 23 C Part II
       Daily Stock Account
       RG 1
       ER 1
       etc....
    Documets Layout
       Incoming Payment
       Outgoing Payment
       Journal Entry
       Transaction Journal Report - Crystal Report
       Sales Quotation
       Sales Order
       Sales Delivery
       Sales Return
       Sales Invoice (A/R Invoice)
       Purchase Order
       Goods Receipt PO
       Purchase Goods Return
       Purchase Invoice (A/P Invoice)
      Inventory Transfer
      Inventory - Goods Receipt
      Inventory - Goods Issue
    Best Regards,
    Samir Gandhi

    Hi Neetu,
    Do you wish that at all customer site all concern involved in implemtation do the same work ?
    I believe ERP is meant for single entry system, and it should be true for implementation also, why to invest man hours for the same task ?
    I expect it standard reports should be released by SAP, so that speed of implementation improve, we have more nos. of satisfied customers.
    customised reports is all together different and it is understood that it is needed to be developed after study the exact requirement.
    Best Regards,
    Samir Gandhi

  • I have set up a new itunes library and am trying to sync this with my iphone.  My iphone is asking for an 'exchange' password.  I don't know what this is or where to find it.

    I am trying to sync my iphone with a new itunes library.  The iphone is askin for an 'exchange' password.  I don't know what this is or where to find it.

    Sounds like you do have an Exchange account setup on your phone. Have a Gmail or Hotmail account? They can both be setup as Exchange accounts. Have a work email account?

  • Re-installed itunes; now how do I tell the program where to find music on my external?

    I just uninstalled and reinstalled itunes. I keep my files on an external hard drive--but in 2 different folders on the same hard drive. Problems: 1. Itunes does not know where to find the files. I get a little exclamation point next to all the songs. 2. Only songs from one of the two locations show up at all.
    Less important, though still of interest to me: Only some of my playlists are showing up as well. I think I had two different itunes library .xml files before. And it is looking at the older of the two. Is that possible?
    Thanks

    Try restarting AppleTV by unpowering as well as restarting computer/iTunes and router.
    AC

  • I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
    Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
    Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
    The network password will appear in the box.
    Quit Keychain Access.

  • HT200285 I want to change my wallpaper to an image that was available before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background. Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

    I want to change my wallpaper to an image that was available
    before I upgraded to IOS 8.1.3 - a close-up image of long reedy  grasses with hazy light in the background.
    Greyish hues. Where can find the image & how do I get it back on my phone?

  • I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

    Hi people,
    I'm typing from Brasil, sorry my English.
    I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
    I intend to keep the original DVD driver and install the SSD in the same HD place.
    If yes, where I find a tutorial about this?
    And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
    http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
    What brand and model of SSD do you recommend?
    Thanks a lot for now and best regards all.
    Carlos Sgrillo
    Porto Alegre, RS, Brasil

    Tukaine
    Sep 23, 2012 10:59 PM
    Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
    This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
    Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
    When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
    If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
    Fixes people have used in the past included:
    Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
    Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
    Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
    Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
    It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
    Instead of HDDFan Control, get the free SSDFan Control
    http://exirion.net/ssdfanctrl/

  • Where to find drivers for hp 15 r022tx? i installed windows 7(64 bit) os.

    Please help me where to find drivers for hp15r022tx model. I am unable to use my machine. I will be using windows 7 (64 bit) on this laptop.

    Hi:
    HP is aware of the drivers missing from the support pages issue and is working on resolving it.
    It is affecting hundreds of notebook models.
    Since I don't work for HP, I do not know when the sites will be operational again.
    With the Thanksgiving holiday in the United States, that has delayed things, I'm sure.
    We are on the fifth day of this problem.

  • Hey guys, do you know where to find the Equalizer in the new updated iTunes?

    Hey guys, do you know where to find the Equalizer in the new updated iTunes? THANKS

    Hi
    When I got this new PC I did a complete audit. I found that this was kenotify.exe at startup.
    Different info I found on the internet say it is essential to the functioning of FN.
    I also noticed that when I press the FN apuie it generates no code. I have a small java script code returns me all the keys pressed on the keyboard.
    I am surprised that the FN will work for you while you do not have this executable.

  • At the very end of creating an email account the program asks for a software security device password, I have no idea what this is or where to find it.

    At the very end of creating an email account the program asks for a software security device password, I have no idea what this is or where to find it. To my knowledge I don't have a "software security device". I am using Windows 7 on an IMac.

    What is the exact prompt or error message you get?

Maybe you are looking for