Btinternet has changed since 21st Nov and it no longer works on the ipad. Can anyone help please?
Can anyone help please, btinternet have changed their servers on e mail since 21st Nov and I can no longer send or receive e mails. BT say set to the following but I cannot get it to work, any suggestions please.
Go to your iPhone/iPad home screen and tap Settings.
Scroll down to Mail, Contacts, Calendars.
Tap Add Account.
Scroll down and tap Other.
Tap Add Mail Account.
Put the name you want people to see when they get mail from you in the Name field.
Enter your BT Business username in the Address field. For example, [email protected] or, where you have registered a custom domain, [email protected]
Enter your BT Business password in the Password field.
In the Description field enter the name you want to use to identify the account.
Tap Next. If you get an error message at this point, tap OK.
Make sure that POP is selected at the top of the screen.
In the Incoming Mail Server section, change the Host Name to pop.outlook.com.
Scroll down to the Outgoing Mail Server section and change the Host Name to smtp.outlook.com.
Tap Save.
Hello Kitty Galore,
It sounds like your your photos that you take on your phone are not showing in your iPad Photo Stream.
I would check both devices to make sure that they both have Photo Stream turned on in the iCloud settings.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
How do I turn on My Photo Stream?
After your devices are up-to-date and you have set up your iCloud account, it’s easy to turn on My Photo Stream on any of your devices:
iOS devices: Go to Settings > iCloud > Photos (Photo Stream in iOS 6), then turn on My Photo Stream.
Mac: Go to System Preferences > iCloud, then select the checkbox for Photo Stream. Click the Options button and verify that the My Photo Stream checkbox is selected. Open the application you want to use with Photo Stream (iPhoto or Aperture) and confirm that My Photo Stream is turned on in that application. You can also adjust your my Photo Stream settings in iPhoto or Aperture Preferences.
If it is enabled, then I would check to make sure Automatic Upload is enabled with this article:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
I imported photos to iPhoto or Aperture from my camera, but I do not see them uploaded to the My Photo Stream album, though the service is enabled.
In iPhoto or Aperture, navigate to Preferences > Photo Stream. Ensure that Automatic Upload is enabled under My Photo Stream and that you have an active Wi-Fi or Ethernet connection.
If Automatic Upload is not enabled, you can either enable it and import again, or manually add the newly imported photos to My Photo Stream in iPhoto or Aperture by dragging them into the My Photo Stream album in your Library.
Cheers,
Sterling
Similar Messages
-
Just upgraded to the latest iTunes and iPhoto and now cannot change photos on my iPad, can anyone help please?
Try one or more of the following:
> Restart Your Computer
> Uninstall and Reinstall iTunes
> Reset iPod (nothing will get deleted)
> Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer. -
I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d
I believe Frank is referring to the end use (e.g., for print or on-screen use).
Until he returns, I can tell you that I ran a quick test using an image from the Aperture 3 training book library which was as follows:
Camera = Canon EOS 5D Mark II
Master resolution = 5616 x 3744 (21 MP)
I was able to export to a JPEG with end file size of 1 MB as follows:
Export Presets drop-down > select 'Edit' option
Selected preset name 'JPEG - 50% of Original Size' > change percentage value to 40% > change DPI value to '300' > click OK to set as current default > Export version to desktop.
The exported JPEG has a resolution of 2246 x 1498 and appears on screen to have the same image quality of the original in Aperture.
Note - I did not change the default Image Quality slider in the Export Preset dialog (which left it at 10).
Basically, you will need to play around with the settings until you find the appropriate values to arrive at an image version you want. -
Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?
There's an alternative ...
Using Image Capture as a scanner:
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom right side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to. -
When I try and download an app, I get a message "MZCommerce.CreditBalanceMismatch.Mobile_message". This is even for free apps, and I do have plenty of credit. Can anyone help please?
With a standard account you need a valid payment method even for free apps.
From the message it sound like there is something wrong with your account or some of the information you entered in the account is not correct.. Verify that the information is correct and then if still problem contact iTunes.
Contact iTunes -
I'm new to iPhone and iCloud... I have lots of pics on my iPhone but only some appear on my iPad, they're in Camera Roll on the phone but random ones only have come into Photos on the iPad - can anyone help? Thanks!
Welcome to the Apple Community.
Photostream when enabled will only add photos from the camera roll that were taken post photostream activation. (Photostream does not currently share video)
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream. -
MY IPHONE 4 which has been working perfectly well has developed a fault on calls.
It will make calls OK and they can hear me perfectly but I CANNOT HEAR THEM AT ALL.
I have checked all the settings and cannot see anything wrong, can anyone help please!!Thanks for answering me. I tried what the help page said but still no luck. My son jut told me that his phone (same as mine) did the same thing and then resolved a little while later. I guess I might just have to wait and see.
-
3Gs. Can't send mms messages, o2 can't help and said it's a phone problem. Can anyone help please
Am I the only one experiencing problems with MMS on my iphone. I've been trying to send a picture message to a 4s for 2 days and o2 say it's not their problem, it's a fault that Apple are having.
Can you send/receive SMS's? MMS turned on in settings? If you answer yes to both of those questions, 99.9% of the time the problem rests with you carrier/provider. Either MMS is not enabled or provisioned properly on your account. If this is the situation with you, call your carrier back & talk to someone who knows what they're talking about. Have them reset MMS.
-
Not sure if I'm repeating myself here, but here is a repeat:
HI, my friend has updated her iPad to iOS8 and has since lost sight of anything she types, ie, email, chat in games, etc. can anyone help, please?If the keyboard is in the middle of the screen tap the tiny keyboard in the lower right corner of the keyboard then slide your finger up to dock then release finger.
-
I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?
I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues! -
I have an iphone 4 and changed my Apple id EMAIL ADDRESS online with no problems. I changed it on the phone in 'Music' but the STORE APP now wont accept my password and shows the previous email address even after syncing, Can anyone help please?
Welcome to the Apple Community.
If it's iCloud that is asking for these details:
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.
If it's iTunes asking for these details:
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too. -
My Android Galaxy S5 has locked up and gone into endless loading while trying to update to the Kitkat update. I have set it back to factory settings and tried again and it has locked up again. My phone no longer works. What else can I do?
Oh goodness,SLEEPER888. We wish you didn't have this problem while trying to complete this update.You have done quite a bit of troubleshooting on your own. If the phone update does not take, we would need to replace it with the warranty. Is it still locked up?
TamaraH_VZW
Follow us on Twitter @VZWSupport -
can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. what do I do
I have been looking for over a week now and even chatted with the USA but cannot get it to work.
I am really strugglingThanks
someone named Eloisa she gave me a phone no. or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand -
I purchased some films on my ipad and since syncing with my itunes, I have lost all my films, can anyone help?
There is some troubleshooting for 0xE8 error codes on this page : iOS: Unknown error containing '0xE' when connecting to a Windows PC
For the charging via USB, a lot of computers don't provide enough power to their USB ports to charge an iPad at a sufficient rate (it may still be charging, especially if the iPad's is locked and the screen is off), the iPad's own wall charger is generally the best way to charge it. -
Hi, my ipad mini has suddenly stopped working and I cannot turn it off or connect it to the computer, can anyone help me on this??
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
http://support.apple.com/kb/ts1827
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom
Maybe you are looking for
-
Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8
Do I need external hard drive to back up my iMac before update to mountain lion? My is OS 10.6.8.
-
Bug report: Energy Manager causes slow performance...
Very slow Windows Startup.. Energy Manager's plans and the problem occured using any plan as I remember, and it wasn't an issue with the maximum processor state. I had heavy disk usage, especially access to the Page File, which is what the person in
-
Tax calculation in SRM and passing onto R/3 PO
Hi, We are on SRM_SERVER 550, SP07 and R/3 4.7 backend. 1. We have a requirement wherein we want the tax determination to happen in SRM. Basically there is no logic for determining the tax codes, but the user himself selects it per line item when cre
-
Is the only current option for an Ethernet connection for a MacAir the USB adaptor? I've seen where the Sonnet thunderbolt adaptor will be coming but I can't find it for purchase. I'll be using my MAP mainly connected to a hard line and fear it's goi
-
how can i decode a column value from another table? e.g. the view selects an ID from TABLE1 and wants to add a column "Description" that decodes the value of the ID column. The decode() function is usable for a small set of fixed decodings. But what