BTM (Business Transaction Manager) - anyone using Quick Start ?
We are trying to use the Quick Start package as a way to learn BTM fundamentals. It installs on Tomcat and that seems to work fine. We'd like to set up an Observer so that we can create transactions to monitor.
Has anybody done this? We won't have our hardware for the "real" installation for a couple of weeks yet and we'd like to be able to use that time with this Tomcat system - we understand it is not the real thing ;-)
Appreciate any advice !
no replies
Similar Messages
-
Business Transaction Management (BTM) Best Practices Sharing
A client I am working with is interested in building relationships with other Oracle customers using Business Transaction Management (BTM). The goal is to share tips, tricks, and best practices. BTM came from Oracle's acquisition of AmberPoint. Please contact me if you are interested in engaging. I can be reached at [email protected]
Unless there is some other reason, users should own the right to share their mailboxes - it shouldn't be something that demands administrator management (if only so that the administrators aren't swamped by user requests for sharing their mailboxes).
For true shared mailboxes, when the mailbox is created, full access is granted by an administrator. -
How to obtain Business Transaction Management ?
I'm new to OEM, so I think I'm confusing myself ! How do I download the Business Transaction Management product ? As I read the Oracle documentation it sounds like a separate product - perhaps I am wrong about that ?
Thanks in advance for any advice !
Edited by: warelock on Dec 28, 2010 10:22 AMThanks, guys. I was able to download the BTM products.
It is interesting - all of the documentation from these sources refers to a version of AmberPoint. Based on the latest BTM Installation Guide (Dec 2010), the architecture appears to have changed - there are Monitors and Observers rather than apContainers and apProxyNodes and nano-agents. I'm not sure if this is a real architecture change or just a different way of describing the products. -
Can the business transaction be controlled using user status profile?
Hi All
there is a requirment that in a project there will be 3 stages of approval.
Each stage of approval should allow specific business transaction.
eg. When the project is apporved in 1st stage then only PR's and pln Oders can be raised.
When 2nd stage is approved then PR's can be converted to PO.
When 3rd stage is approved then and Production activity can take place.
I would like know whether user staus profile can be used to control the business transactions? If yes how?
If user status is not possible, can any one help me out?
Regards
PaimalHi ,
As per me this scenario can be handled without user status
When the project is apporved in 1st stage then only PR's and pln Oders can be raised.
If ur generating PR/ planned order thru MRP run it is only possible after WBS release.So give the WBS release authorisation to 1 st authority.
When 2nd stage is approved then PR's can be converted to PO.
Put release strategy to PR so that there can be check by autourised person.
When 3rd stage is approved then and Production activity can take place.
Give production order Release authorization to person who is responsible for production planning.
It is not suggestable to look at this scenario for applying user status.
Rgds -
Cisco Notification Service - Profile Manager "anyone use this service"?
Hello
We are undergoing a WAN analysis and one of the questions was "Do we receive field notices on IOS or hardware from Cisco"?
We don't and I don't want to receive evrey notice on all products
Does anyone have any insight into this service?
Can it be tweaked so that I only receive notices on products that I have purchased or cross referenced with my Cisco Contracts?Hello,
Not ure if you got the right answer. YOu dont need port profile manager on 2.2 version The documents you a refering dont state that. Use the below
link
Background on VMFEX Hyper-V:
Prerequisites needed in order to configure VM-FEX with Hyper-V :
2.1 Release :
• UCS Software
• 2.1 Infra Bundle & Adapter firmware
• Cisco ENIC driver for Windows Server 2012 (Same driver for hypervisor and VM)
• Cisco Port Profile Management Snap-in used to attach/detach port profiles à “VM-FEX_TOOLS_64_2.0.18.msi”
• Microsoft Software
• Windows Hyper-V 2012
• VM-FEX on Hyper-V only support windows 2012 VMs
2.2(1) Release
• UCS Software
• 2.2(1) Infra Bundle & Adapter firmware
• Cisco ENIC driver for Windows Server 2012 (Same driver for hypervisor and VM)
• Microsoft Software
• SCVMM 2012 SP1
• Windows Hyper-V 2012 SP1
2.2(2) Release
• UCS Software
• 2.2(2) Infra Bundle & Adapter firmware
• Cisco ENIC driver for Windows Server 2012 (Same driver for hypervisor and VM)
• Microsoft Software
• SCVMM 2012 SP1 and R2
• Windows Hyper-V 2012 SP1 and R2
For 2.2 release and above….please use this link : http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/hyperv/gui/config_guide/2-2/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide_2_2/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide_2_2_1_chapter_01.html
Hope this helps
Venky -
813 new library services / content manager: anyone using in production
Greetings,
I'm looking for feed back on the new library services / content manager in 813.
We're currently using InterWoven for CMS to WLP7. We're migrating WLP7 to WLP813 and are pondering whether the CMS built into WLP813 is solid, usable and production ready?
If so we'd drop use and support costs for Interwoven.
What would be lost that I can imediately see is easy promotion of content between dev, qa, prod. We'd have to use DB replication scripts. Could use helps here too.
BTW, I found a nifty DB/table migration tool: opendbcopy.org
Thanks for any thoughts, curtDo you have a particular reason for purchasing this specific device?
i.e I use a QNAP TS410 nas which does all that you want on mac flawlessly, so at the minimum add this to your potential list. -
Has anyone used Quick book on their Mac in Canada?
Has anyone used Quick book on their Mac in Canada?
-
Navigation is not possible as there is not any business transaction
Hi Gurus
I am using IC Web Client 5.0. When i clicked on sales order view in the ic web client Navigetion bar i have encountered with a problem.
"Error: Navigation is not possible as there is not any business transaction".
can anyone give me the solution for this error.
Thank u in adv
manjuHi,
Check whether u have assigned ur transaction type in spro setting:
Customer Relationship Management>Interaction Center WebClient>Business Transactions-->Define Business Transaction Profiles.
Hereselect ur Business Transaction Profile and assign ur Dependent Business transaction.
Regards,
PePe -
Hello,
I am looking for a free transaction manager to use JTA/XA with
an Oracle 8.1.7, Sybase 12.0 and MQSeries 5.2.1 ...
did anyone something with it ?
[email protected]Hi,
You can download JOTM[1].
It is an Open Source JTA Transaction Manager
developped by ObjectWeb consortium.
Latest release is 1.3 and is available from its SourceForge site[2].
Do not hesitate to contact us on our mailing list ([email protected])
if you need more information
regards,
jeff
[1] http://www.objectweb.org/jotm/
[2] http://debian-sf.objectweb.org/projects/jotm/
Jeff Mesnil
JOTM project leader -
Regarding Oracle Business Process Manager and WS-Security
Hi All,
Actually I like to invoke couple of secure services running on seperate
server runnnig JWSDP.These services are using WS-security,so I am just
wondering if it possible to call these webservices through Oracle
Business Process Manager.
As our secure services are using JWSDP so thats the reason we prefer to
use the BPEL engine which deployed on top of JWSDP so that We dont
have to confront with compatable issues among different toolkits.
So I am just wondering do you think that Oracle business process manager
ws-secuirity implementation can use the JWSDP implementation i.e
xws-security implementation,in otherwords is it possible to use JWSDP
with Oracle business process manager for using the ws-security?Thanks.
I would appreciate your help.
Kashifyes we do native in Oracle BPEL PM (username token) - as explained here
http://www.oracle.com/technology/products/ias/bpel/documents/bpel_admin_10.1.3.1.0.pdf page 30
for more sophisticated ws sec stuff, pls use Oracle Webservice Manager -
Has anyone used infin to assist in troubleshooting ?
I had a security problem when my firewall was temporarily turned off. A tech company named "infin" assisted me with the problem and with a printer problem. Since assisting me, the tech said that the company will no longer be in business. Has anyone used "infin" for assistance because the tech said his company does a lot of work on Apple products. I am trying to find out more on the company.
How did you find that company?
Did you allow them remote access to your computer?
Did you give them credit card details?
If you google their name, you'll find several entries. I've never heard of them. And no, I've never used them - nor would I ever. Why deal with an unknown company when I can call Apple tech support or visit a Genius Bar in the Apple store free of charge? -
GeneratePDFService quick start code issue
Hi,
I am getting a build error, while using quick start code for converting the native document into PDF document through webservice api.
error: The type or namespace TestPDFG8WS couldn't found
In the quickstart code, it is using TestPDFG8WS as namespace as you can see below a line of code.
using TestPDFG8WS.GeneratePDFService;
Any idea, what reference we have to add to fix the issue ?.
refer the following link to see the quickstarts code .
http://livedocs.adobe.com/livecycle/es/sdkHelp/programmer/sdkHelp/wwhelp/wwhimpl/common/ht ml/wwhelp.htm?context=sdkHelp&file=quickStarts_GeneratePDF.11.1.html
Regards,
ArvindHi Arvind;
I'll admit that I'm not a .net expert, but I was under the impression that Microsoft abandoned the DIME attachment format with .Net 2.0.
I have been able to use a base64 encoded message with success.
In the following code my web reference is called: GeneratePDFServiceService
private void goButton_Click(object sender, EventArgs e)
// Create a GeneratePDFServiceServiceWse service object
GeneratePDFServiceService svc = new GeneratePDFServiceService();
svc.Url += "?blob=base64"; //Visual Studio 2005 (WSE 3.0) does not support DIME and MIME attachments
//set the login credentials
svc.Credentials = new System.Net.NetworkCredential("administrator","password");
// Create a BLOB that represents the input Microsoft Word file
BLOB inDoc = new BLOB();
String inFileName = "C:/temp/myDoc.doc";
inDoc.binaryData = this.readFile(inFileName);
// Specify the PDF and security settings
String adobePDFSettings = "Standard";
String securitySettings = "No Security";
String fileTypeSettings = "Standard";
mapItem[] createPDFResults = svc.CreatePDF(inDoc,
inFileName,
fileTypeSettings,
adobePDFSettings,
securitySettings,
null,
null
// Obtain the converted document and log file identifiers
for (int count = 0; count < createPDFResults.Length; ++count)
//get an item from the map
mapItem mapEntry = createPDFResults[count];
String mapKey = mapEntry.key as String;
//The new PDF will always have the map key "ConvertedDoc"
if (mapKey.Equals("ConvertedDoc")){
String filename = "C:/temp/" + mapKey + ".pdf";
BLOB resultBlob = mapEntry.value as BLOB;
byte[] binaryFile = resultBlob.binaryData;
this.writeFile(filename, binaryFile); -
Business Transaction Profile - Error when using Z-Transaction Type
Dear Experts,
we are using SAP CRM 7.0 (Support Level 0007 - SAPKU70007). I have created a Z-Business Transaction Profile Z_IC_SERVICE.
SAP Help says:
Enter the transaction type to be used as a default in your scenario in the IC WebClient. For example, choose the transaction type 0010 (Interaction Record) if an interaction record is to be created automatically. The system creates this interaction record automatically after the interaction has started (for example, after accepting a call). During this, the activity clipboard in the interaction record is filled with the relevant data.
So when I am using the transaction type 0010 (Interaction Record) in my Business Transaction Profile all is OK that means I can search for accounts and I can confirm them to go on with the process.
BUT: When I entering here a Z Transaction Type (Z000) the systems shows the errors:
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event BPConfirmed.
Then I have made a copy of the transaction type 0010 (Name of copy: Z010) and tried to use it in my Business Transaction Profile the system says:
Customizing settings missing. Assign partner functions to Z010
Anybody know what to do and where to avoid errors? Note 1346892 is obsolete in this case because we already have the highest Support Package Level.
Best Regards
OliverHi yes you were right. In the case of both transaction type I have corrected the customizing parameters in
SPRO -> Customer Relationship Management -> Interaction Center WebClient -> Business Transaction -> Assign Partner Functions to Business Transactions
In the case of Transaction Type Z010 I had Z-Partner Functions and and that leaded to the errors:
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event BPConfirmed.
In case of the Transaction TYPE Z000 I forgot to assign the Partner Functions that is why this error appeared:
Customizing settings missing. Assign partner functions to Z010
Thread Closed -
Business Process Management use cases within an SAP Environment
Check out the [BPM use case wiki |http://wiki.sdn.sap.com/wiki/display/BPX/BusinessProcessManagementUseCases]to learn how many SAP customers are profoundly transforming their companies by leveraging the discipline of Business Process Management to optimize, monitor, and measure their business operations. Join us as we survey over 20 industry and cross-industry use cases where BPM methodologies and tools were applied to help align business goals with IT implementation to rapidly achieve measurable business improvements. See how other companies got started with BPM and get ideas of how you can begin delivering business value rapidly with a BPM approach in your own company.
Become part of this effort by providing your feedback in this forum or adding your insight and help grow the knowledge base by becoming a contributor the BPM use case wiki by sending a request to the wiki owners.Hi,
Thanks a Ton for the info. Just to let you know that the link has been changed...
Here is the new link...
http://wiki.sdn.sap.com/wiki/display/BPMUC/BusinessProcessManagementUseCases
Regards,
SrinivaS -
Starting managed server using node manager
When i try to start the managed server using node manager i get the following error
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
Abort - core dumped
<Sep 21, 2010 3:58:07 PM> <FINEST> <NodeManager> <Waiting for the process to die: 22708>
<Sep 21, 2010 3:58:07 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Sep 21, 2010 3:58:07 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
The managed server lok file is deleted, port is not in use. With similar node manager settings the managed server on the redundant server starts fineHi,
I am getting same issue. Not able to start the soa_server1. Can you pleae tell me the soulution if you able to reslove the issue.
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
D:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=soa_server1 -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle\Middleware\user_projects\domains\domain2\servers\soa_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1 -Doracle.server.config.dir=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1\servers\soa_server1 -Doracle.security.jps.config=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1\carml -Digf.arisidstack.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dsoa.archives.dir=D:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=D:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=D:\Oracle\MIDDLE~1\USER_P~1\domains\domain2 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Djava.protocol.handler.pkgs="oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol" -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=D:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.oracle.home=D:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=D:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.102:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_oepe1033\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<Oct 4, 2010 6:25:39 AM> <FINEST> <NodeManager> <Waiting for the process to die: 700>
<Oct 4, 2010 6:25:39 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Oct 4, 2010 6:25:39 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Maybe you are looking for
-
Why can't I open a Numbers '09 file in Numbers '08?
I created a Numbers file on my macbook pro which has iWork '09, emailed it to myself, tried to open it on my desktop (which has iWork '08) and got an error message about not having the right version of Numbers. What? Why can I open any excel file but
-
Mail Inbox no longer displays full email under "To".
I have multiple email addresses in use from different email services (cable, web based). Apple Mail draws from all accounts to populate my Inbox, but since switching to Yosemite, I no longer can see which of my email accounts is receiving a new mess
-
When we can go for a java bean
Hi, i would like to know when we need or when it will be useful the java bean in a client-server application deveoped by using forms 6i, could abybody help without a link . Thanks Bcj
-
Can I use Built-in SQL Server in Visual Studio 2010 ?
Hi Friends, I am Atif. If I will upload my project to my Server Domain and I want to use Built-in Visual Studio 2010 Sql Server Expreess Database then it will work. If yes then Please suggest me How..?? Actually I don't want to install SQL Server Dat
-
why is my ddr clock set to 333mhz when i have got 400mhz memory ..........I cant change it it is greyed out ....have tried changing settings in dram settings as well