BTOES Security Key Help!

I recently re-installed my BToes Dongle Software and suddenly when I tried to get the security key from MSI Website (http://www.msi.com.tw/program/products/communication/cmu/pro_cmu_registry.php ),  I keep on getting this message:
Dear customer:
According to the BD address, your device is not from MSI.
Please kindly double confirm and retry it.
Regards,
MicroStar
I emailed tech support buy their response was to get the security key from Widcomm (Broadcom) website.  They said Widcomm suddenly shutdown the registry web without notice.  So how can I get it from widcomm if they shutdown the registry website? Any help is highly appreciated!
Regards,
Niel

Hi ,
I have the same problems as you do.
Can't MSI do something about it ?
I send mails over and over and i just get this first reaction by an automated
process telling me how to get the adress .
I know very well what my address is , since i recorded it on the device itself.
And i do know how to use this stupid programs to find it.
When i reinstalled windows i lost a file with the code in it, no problem i thought... Just go to website and fill in the boxes...
I typed the address in the website u mentioned on msi-site and the one that is not working from widdcom and it just telling me that it is not a MSI produkt..
Now do we need to come to ur place and show the mofo bluetooth device with huge letters on it saying MSI !!!!!!!!!!!!??????!!!!!!
Is this the way u deal with ur customers ?
As i am entitled to have a good working device, i like to sue the MSI company, who's with me ?  
Can anyone tell me if this support is always like this ?
Where can i send a bill for my waste hours ?
HOW do i get the security-code ??
Update: since installing driver for sp2 and bluetooth software 1.4.3 it did find the dongle and adress. Now after a few reboots it wont find the device either, while it is installed and working oke on windowssoftware builtin the XP sp2.
So how am i going to find the address now ? Well i got it written lucky me..
now all i need is this security code.....
I was planning on using software 1.3.1 coz it dont ask for a key. Does this work in windows xp sp2 and do i need the new driver ?
greets
johan

Similar Messages

  • HELP: Security Key and Passphase

    Im trying to connect my router to a laptop that i got for christmas, but it keeps asking for the security key or passphrase. I know neither...can anyone help me find where i can retrieve these keys...thanks in advance for your help

    Hi, the passphrase can be retrieve in the set-up page of the router. Follow this steps below:
    >Go to the main PC  in the address bar type:192.168.1.1
    >Type password: admin , no username 
    >in the set-up page: click wireless tab then wireless security
    >take note of the wpa pre shared key- is the passphrase/security key that your looking for
    (Mod note: Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 12-29-2008 08:00 AM

  • I need help changing the security key for WRT54G2 1.5

    I already know the security key on my network, I just need to change it.  I don't have 'cisco connect'. I've tried the web based method with the 192.168.1.1 IP and using 'admin' for the password, but that gives me a '401 Not Authorized' error.  I've tried using my own security key instead of 'admin' and that doesn't work either.   How do I change this.  I tried to use the Linsky's knowledgebase and that didn't help. Live Chat won't help unless I'm willing to sign-up for some paid service plan, and there is no way I'm doing that.  I've never heard of a company charging their customers just to explain how to do something. All I have is a simple question about how to change the network security key when I already know what it is and there is no problem with the connection. Can anyone help me.  PLEASE.

    If admin didn’t work, it’s possible that you might have setup a different password to login to the setup of the router when you initially set it up. Since admin and your security key didn’t work when you tried accessing your router page, the other option for you then is to reset the router. Push and hold the reset button on the router using a pin or a paper clip for 30 seconds and unplug the power cord for another 30 seconds. Once the power light goes solid, you may start reconfiguring the settings of the router. For instructions, refer to these links: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection. Once you establish the wired internet connection, you may then start reconfiguring the wireless settings. Go to the Wireless tab: set the wireless configuration to manual; set a network name; then save the settings. Once saved, click on Wireless Security subtab:  set the security mode to WPA2 Personal and enter a new security key on the passphrase bar.

  • I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi. Please help...

    I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi (like a hotel). Please help...

    the appletv will not be able to work on it's own
    you can use a computer or iphone acting the role of hotspot login using it's browser and getting internet access and then sharing it with the appletv
    so the appletv sees it as a wifi router it connects to

  • Help wlse wnm status authenticated but not security keys setup

    Hi all, i have a WLSE 2.15.2 and AP 1100 12.3(JEB), the state of the AP NM status is authenticated instead of security keys setup, they know because can be?, by this razon apparently does not send the AP the messages of RM to the WLSE, thanks.

    Can you try to Enable *all* radio interfaces so that they're "up" in the "show ip interfaces brief" and then redo the inventory on the WLSE. Leave them up until the wlccp link comes to "SECURITY_KEYS_SETUP". Once it comes to that state, you can shut down the radio interface.Even after a reload, the SECURITY_KEYS_SETUP will remain.To expedite the process, run a Discovery job on the AP.

  • Not able to logging in DAC 11g, throws "Security Key is invalid or unavailable"

    Hi Friends,
    I installed DAC 11g in Linux (Installed in Windows and moved it to Linux and configured). It was working fine and sometimes it throws "Security Key is invalid or unavailable".
    I updated the DAC Repository schema details using standaloneServerSetupPrompt.bat file. Also getting the same issue.
    Appreciate your help on this.
    Thanks,
    Sakthi.S

    you need to contact your BASIS admin and tell them to check if BM7CLNT100 is available for access and that credentials you are using are authorized to access it.
    I'm assuming you're using SAP Authentication to login. If you login using Enterprise - you should be able to login into Infoview or CMC as BW changes will not affect that.

  • Time capsule "Security Key"

    According to Netflix, I need a "Security Key" for Time capsule so it can connect to my internet  ready TV.  What is that and how can I find it?  I could communicate with the TV until I had to do a hard reset on the router to make the network work.  My network is working fine otherwise.   Thanks for any help.

    You should not change the password on a wireless network unless you also change the name of the wireless network. Various devices store the network name and password information and if you change the password, the device still sees the same network name and thinks that it should use the old password.
    Try changing both the name of the wireless network and the password on the Time Capsule.
    Access the settings for the wireless network as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Wireless tab below the row of icons
    Change the settings for both the Wireless Network Name and Password
    Write those down
    Click Update to save your new settings
    Then look for the name of the new wireless network and enter the new password to connect on all wireless devices

  • WRTU54G-TM asking to put security key

    I have WRTU54G-TM at home.  Ethernet-cabled desktop comp works excellent as well as laptpop with push-in wireless card (no latest model).  This laptop connects to my wireless system  not so quick but stable and authomatically, without any questions  to put inside "security key" because my wireless connection is "open" (i. m. without any security code).
    But I bought recently small laptop - notebook ASER E-machine 250-1162, model # KAV60 with Wi-Fi card inside.
    When I try to connect this notebook to home "open" wireless network to go to internet each time the notebook asks me (during process of connection) to put "security key".  I tried to put IP addresses that are on the router (192.168.0.1 or
    192.168.24.1) but computer does not accept these ##.   But the notebook contacts with internet very well with help of ethernet cable.   How can you help me ? And thanks in advance, Al. 

    Linksys router does not support multiple IP address schemes. For example, if you're using an IP address of 192.168.1.1 for your router. then try to use IP addresses from the range of 192.168.1.2 --> 192.168.1.254 for your hosts. If your router's IP address is 192.168.1.1 and one of your hosts has an IP address of 19.168.24.1, then there are good chances that they will not communicate with each other. Even this, your actual issue is caused by misconfigured wireless settings. Therefore, try to verify your wireless settings.
    Hope this help!
    Linksys router setup

  • Ipod billing screen wont take valid security key?

    Alright, so my credit card time expired for apple. So I go in a select a new date for it to expire the next time. But when I put in the security key for my card it keeps saying invalid key.(note this is on my ipod touch). The problem is, the key I have IS valid. So I went into my apple account(on the apple site) and put in the key, it takes it and everything. When I use my ipod and go to download music, applications, or updates it tells me I have to sign in. So I do, but than it takes me into a screen with my billing info asking for the security key and to set a new experation date. Again. I did all it asked for, hit done, selected a county, but it sends me back to the screen once again saying the key is invalid. The apple site will take they key and say its valid, but on my ipod it says its invalid... So I tried going in and re-entering my credit card info and etc.on the site and it worked, for the site anyways, not the ipod. So basically my problem here is: Itouch billing info screen wont take valid security key.
    Ive tried re-entering my info, making sure the adresses and everyting are the same, but nothing seems to work and I cant download anything to my ipod until this works. Please help!
    NOTE: Please dont send me a link to the part of the apple site telling me to redo my info, like I said, I already tried that.

    I am having the same exact problem. It's like I am not putting the right information, but I have quadruple checked several times. It asks for me to put in a a new security code then it takes me to city/county and it only has one option(which is the right one. I don't understand what is happening...I mean we have 3 people who have the same problem..is there an answer to this?

  • Finding my security key

    I have got a WRT54G router connected for the past year. I'm trying to add another laptop to my network and can only connect with limited connectivity. It keeps asking me for security code. I thought I used all zeros for the 13 digits but its not accepting it. And I can't log in to 192.168.1.1./
    Can anyone help me with this problem??

    Might be the security key which you are using, that might be invalid thats the reason you are unable to go online from your Wireless Computer. To Find out your Security key, Follow the setps bellow.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security..... In this tab you will fine out your security key, note down your security and then try to connect to your Wireless Network again on your Computer. 

  • Where can i find security key

    im trying to connect my pc to my network with airport extreme and is asking for a security key and icant find it

    Security key is your normal wireless network password.
    There is a very long 64 digit code which is generated when you enter your password, but this is rarely needed...and rarely helps.  You probably do not have room to enter this in the password area as well.
    If you want to try this...I doubt that it will help...post back to tell us what operating system you  are using on the computer that is is used to configure your AirPort Extreme router.

  • WLSE 2.9 and WDS AP's stuck in "Security Keys Setup"

    Hey all,
    I had to rebuild a WLSE, did a restore from a 2.9 CD. Restore went great, rediscovered all the devices. I am not however getting any rogue or adhoc detection.
    I've found that all the WDS servers are stuck in "Security Key Setup". I've tried rebooting all the WDS servers, even the WLSE several times.
    I believe that there must be some kind of key mismatch now between the WDS servers and the WLSE.
    The usernames and passwords without a doubt match. It is however possible that during the rebuild setup of the WLSE that not all the same information was entered, ie domain name etc.
    Does anyone know how to flush the AP's to try and negotiate a new key with the WLSE appliance?
    I've tried "clear wlccp nm" and "clear wlccp ap"
    Any ideas?
    Thanks,
    -Brian

    Hey all,
    Just an update for everyone.
    "Security Key Setup" is a good thing, it means the WDS's have registered with the WLSE, so I was barking up the wrong tree there. I thought it meant it was trying to establish the keys.
    After some more research I found my problem. Radio Monitoring was not enabled on the WLSE. I reconfigured it and everything is working great now.
    Hope this helps someone.
    Take care,
    -Brian

  • Wireless security key

    HI how can i find my wireless security key, i cant find the little plastic tab with information on

    linlin61 wrote:
    HI how can i find my wireless security key, i cant find the little plastic tab with information on
    Have you looked on the bottom of the home hub?
    http://bt.custhelp.com/app/answers/detail/a_id/14000/~/how-do-i-find-the-wireless-network-name-%28ss...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • What is the security key?

    I don't know my security key. I have tried my id and password with noo success.......HELP, please. 

    sounds like you mean your wifi networks encryption password
    as stated non of the rest of us renember your password
    if you never changed it then maybe the manual you got with your wifi router tell the default password
    otherwise you can connect the appletv by ethernet then the encryption key is not required

  • C4580 Wireless Networking Issue - WEP Security Key not accepted.

    I keep getting this error whe doing network setup on my new Photosmart C4580.
    "Your wireless rounter requires a WEP secuirty key. The security key configured on your printer does not match exactly. Reconfigure your wireless network WEP security key for your printer."
    I have downloaded an updated installer. I have tried to access the printer via the IP address to make the change. It is never updated. When I run the Wireless Network Test Report it also shows it fails. I am entering in the first WEP security key (Index 1). I know the key is being entered correctly. I have even copied and pasted it. Nothing works.
    Help Please!

    Jim:
    Thanks for your comments. I think you may be right. I have more information now. I installed a later version of the C4500 package (to fix another problem where the PC Firewall and internet access was disabled for 3 mins at startup), and the network setup/diagnostics are different in the newer package. After installing this the first time, everything worked - I mean everything, even scan from printer. During the Network Setup the wizard found only one network (mine). However, the Wireless Network Report said it had detected two.
    However, the next time I switched the printer on, it never connected. Network diagnostics then told me that the PC and the printer were on different networks, 192.168.0.0 and 169.254.0.0 and that this usually results from two close networks with the default router manufactures SSID. This is not the case here - I am in any case in a very isolated country farm!  It also (predictably) said the WEP was wrong. At one point in the diagnostic I can see it's trying 169.254.196.213.  There's nothing on my network other than 192.168.0.*  Attempts to reconfigure the network again show that there is only one network detected on-air, and no duplicate SSIDs, but the same result in the diagnostic - crossed-networks. Even re-installing the software won't fix it now. Whereas before I could at least print/scan from the PC and only the printer 'thought' the network was dead, now the network really IS dead and I am left with a USB-only setup.
    I think you may be right that the printer somehow 'remembers' a phantom/ghost network. What I need is some way to hard-reset the printer. I saw in other postings that you know something about this, at least on other printers. Alternatively, I need a way to set the printer network parameters, including hard-coded IP address, over the USB but WITHOUT the router radio on, then switch it on and let the HP network setup wizard find it over the radio. Any ideas on that one please?
    Peter M

Maybe you are looking for