Bubble chart color
Hi, just wondering if anyone knew how i can change the color
of a bubble in the flex bubble chart when the mouse moves over?
thanks
done it! selectionMode needs to be set to single.
however anyone know how i can use another color for selection
mode, the its default is grey.
Similar Messages
-
How to change the colors for individual bubbles in a bubble chart?
I have a report where in a bubble chart needs to be shown with different colors for bubbles available in the chart. I cant find any option to select individual bubbles and format the color options.
Any guidance or suggestions solving this would be much appreciated.
Thanks,
VinayThanks JB for your reply, I see in format chart data there is are two sections:
1. Positional
2. Conditional
In Positional - I have the type and color changes for the bubbles but if I change any color in that all the bubbles are simultaneously getting the same color code.
Not sure if there is any other setting. Please share me your thoughts on this.
Thanks again -
Bubble Chart: missing exception colors, mousover text etc.
Hi,
I have some problems with a bubble chart. The definition of the query is like this:
project status sfactor rfactor budget
1--1---30-100--
30
2--2---10---15--
30
3--1---234--
45
4--3---50---10-----140
Project and status are characteristics, the other objects are key figures. A project has a status. There are 6 stati. Based on the status the bubble in the bubble chart shall have a specific color. So I set an exception for each status level. I use a BW 3.1 SP19.
Based on this query I create a bubble chart in web. I have now the following problems:
1.The bubble chart shows only 3 different colors (red, yellow, green) and not these colors that are also used in the BEx query. In BW3.5 more colors are displayed. Is there any restriction in 3.1?
2.In case of mouseover (over the bubble of the last project see above) the text "project 4: 140" is displayed. Is it possible to display also the description and value of the status, sfactor and rfactor?
3.I configured the chart options in such a way, that rfactor and sfactor shall be displayed above the bubble. But this works not for all buubles. Any explanation for that?
4.If I restrict the displayed bubbles only to one status level (by means of a dropdownbox), then the displayed bubble is bigger than before. I fixed x- and y-axis. So why do I get now an other size for the selected status level. Any chance to avoid this?
5. The chart legend still shows the original bubble colors, so not the exception colors. Is it possible to force the legend to show the correct colors?
I would be very grateful for any help.
BR, Andreas
Message was edited by: Andreas AppeltHi Andreas
1.) http://help.sap.com/saphelp_nw04/helpdata/en/c4/274b795a809a4da0f3c991284e1cee/frameset.htm
2.) Only with own javascript on not released HTML objects
3) Could be a problem of size (is there enough place to see the text?)
5) No
Heike -
Color of bubbles in bubbles chart
Hello,
I am using a WebI bubble chart, where each bubble represents a company (company dimension used as shapes) and two measures the coordinates. I created a formula to cluster my customers into A, B and C customers and want to color my A companies red, B blue and C green.
I used the Cluster-dimension as "chart color" objects in the bubbles chart and used a custom color scheme to get the right colors for A, B and C.
Unfortunately for some reason it happens sometimes that WebI mixes up the colors, like A becomes blue instead of red and so on. I don't know exactly how to reproduce that problem, but is there a way to assign the colors to my dimension values?
thanksHi Badri ,
i tried your senario in my system . initial i got the same colour for both profit and loss in the pie chart .
then i change some properties in the Edit customising option iand i get the desier result you want .
let me share that steps with you . wit screen shot
creating the Bussiness graphics with one series .
[http://i49.tinypic.com/wgpa8h.jpg |http://i49.tinypic.com/wgpa8h.jpg ]
Editing the properties by choosing Edit Customizing , choose pie chart -> click on plot area & choose AREA Properties -> - change the colour & secondary colour .see the below screen shot
[http://i48.tinypic.com/vp9q81.jpg|http://i48.tinypic.com/vp9q81.jpg]
After changing that i got the desier result
ht[http://i46.tinypic.com/20iwbih.jpg|http://i46.tinypic.com/20iwbih.jpg]
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Jun 23, 2010 12:02 PM -
Portfolio (Bubble) Chart Capability
Greetings,
I am trying to create a bubble chart using WAD 3.5, the Portfolio chart type seems to be the most appropriate, but I can not figure out how to get the chart to show the metrics per my specification.
X-Axis - Change in Days
Y-Axis - Change in Value
Z-Axis (Size) - Total Value
Bubble Color - Region
Individual Bubble - Opportunity
The results should be a bubble chart with 4 different series, each series containing a datapoint representing an opportunity.
The bubbles are sized based on the total value of the opportunity and are positioned in the chart based on the shift in days (x axis) and value (y axis) from a previous time period.
The data is not a problem, I have a query with all the relevant characteristics and key figures. The issue is getting the chart to properly chart these items. The closest I can get is with:
Row Fields: Region
Column Fields: Opportunity, Key Figure Structure
When I do this, I do get one 'series' for each region, but all the bubbles for each series get placed at the X-Axis value for the first opportunity. Other attempts have resulted in creation of a series for each opportunity.
Thanks.The frustrating part of this - is that the "Chart Wizard" view in Web App Designer shows exactly this scenario when previewing the Portfolio chart design - a few color-coded series, each containing multiple datapoints, with varying bubble sizes places on the chart based on key figures on the X and Y axes. I can not figure out how to get any query to replicate this.
-
I have a bubble chart where each doctor is his own bubble, and I have about 18 bubbles.
Is there a way to make the labels on a bubble chart be the Doctor name, instead of the number of cases eash doctor has? With 18 bubbles it's difficult to tell from the legend which color equates to which bubble, as many colors are similar...Have a look here:
http://obiee101.blogspot.com/2008/01/obiee-xy-and-data-in-mouse-over-label.html
regards
John
http://obiee101.blogspot.com -
Bubble Chart drill down issues
I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
ThanksHi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko -
Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear. -
Bubble chart with scatter chart type and different bubble sizes
Hello everybody,
I would like to create a bubble chart (scatter chart) within Oracle 11g and Apex 4.2 with the standard chart types that come with Apex (anychart).
I want to integrate two different KPIs (key performance indicators) in the chart, one for each axis (x and y) and additionally the size of the bubbles shall represent the size of the company, the KPIs belong to.
That is to say, every bubble represents a company with two KPIs and its size.
Now, I have problems changing the size of the bubbles. Can someone give me a hint where to start or how I could achieve this with a standard sql query (series) !?
Is that possible with the standard charts (scatter type)?
Can I control the color of the bubbles?
How can I control the starting and ending points of the axes in order to show all bubbles completely even if they are e.g. 0,0 (x,y) (this would show only a quarter of the bubble) or 0,3 (which would show only half of the bubble).
I will be very thankful for some hints.
Thank you very much in advance.
JohnnyGo to any chart and look at the examples. You can view the xml, there are bubble chart examples.
AnyChart - Cross-Platform Flash Charting Solutions For Your Project -
Obiee 10g - How to Increase the default size of Bubble chart radius axis
Hi,
I have an requirement of creating bubble chart in obiee 10g.
When i was developing the bubble chart i noticed that there is no option of increasing the size of the bubble.
When the measure value is low the bubble is not getting displayed.
Kindly help me with any solution.
Regards,
AbdulHi Alok_Aswal,
In SQL Server Reporting Services 2008, the Bubble chart has several custom attributes which allow us to control the size of the bubbles. "BubbleMaxSize" and "BubbleMinSize" attributes allow us to define the size of the bubble in the chart series. The values
set are in percent of the whole chart size. We can find those attributes in the property pane by selecting bubble series and expanding 'CustomAttributes' properties.
And based on my research, the Marker size has a wide range, but for some reason once we get to around 8 the bubble in the legend will not grow any bigger. So in your scenario, we can set the Marker size to 8pt, then set the appropriate “BubbleMaxSize" and
"BubbleMinSize" based on the chart size to make the size of both the bubble are the same. For example, we can also set “BubbleMaxSize" and "BubbleMinSize" to 8, then manually adjust the chart size until both the bubbles have same size.
Beside, we can delete the original legend, and drag a tablix to the right of the chart. And then insert the corresponding data and color to tablix to let it looks like a legend. For more details information, you can refer to the link below to see Mike’s
post:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cbf2f48e-fe40-4c1b-b82a-d40fd269f2ef/setting-custom-colors-on-a-column-stacked-bar-chart?forum=sqlreportingservices
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
SSRS 2008 Bubble chart - How to set the default bubble size?
Hi,
I have a bubble chart. I want to set the size of the bubble in the chart and the size of the bubble in the legend display box to be same. I increased the size of the marker to increase the size of the bubble in the legend display box but it is not increasing
after 8pt. In my chart the size of the bubble is not dependent on any variable or parameter. It is the default size. Is there any way that i can make the size of both the bubble same?Hi Alok_Aswal,
In SQL Server Reporting Services 2008, the Bubble chart has several custom attributes which allow us to control the size of the bubbles. "BubbleMaxSize" and "BubbleMinSize" attributes allow us to define the size of the bubble in the chart series. The values
set are in percent of the whole chart size. We can find those attributes in the property pane by selecting bubble series and expanding 'CustomAttributes' properties.
And based on my research, the Marker size has a wide range, but for some reason once we get to around 8 the bubble in the legend will not grow any bigger. So in your scenario, we can set the Marker size to 8pt, then set the appropriate “BubbleMaxSize" and
"BubbleMinSize" based on the chart size to make the size of both the bubble are the same. For example, we can also set “BubbleMaxSize" and "BubbleMinSize" to 8, then manually adjust the chart size until both the bubbles have same size.
Beside, we can delete the original legend, and drag a tablix to the right of the chart. And then insert the corresponding data and color to tablix to let it looks like a legend. For more details information, you can refer to the link below to see Mike’s
post:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cbf2f48e-fe40-4c1b-b82a-d40fd269f2ef/setting-custom-colors-on-a-column-stacked-bar-chart?forum=sqlreportingservices
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to toggle bubble chart Item's visibility?
I have a bubble chart. I need to toggle the visibility of a particular bubbleSeriesItem (specific data point) ?
Thanks,
TanuHi Tanu,
You can try this..provided you only have only positive values on y-axis.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
[Bindable]
private var expensesAC:ArrayCollection = new ArrayCollection( [
{ Month: "Jan", Profit: 2000, Expenses: 1500, Amount: 450 },
{ Month: "Feb", Profit: 1000, Expenses: 200, Amount: 600 },
{ Month: "Mar", Profit: 1500, Expenses: 500, Amount: 300 },
{ Month: "Apr", Profit: 1800, Expenses: 1200, Amount: 900 },
{ Month: "May", Profit: 2400, Expenses: 575, Amount: 500 },
{ Month: "Jun", Profit: 2400, Expenses: 120, Amount: 1500 } ]);
//Say if I want to hide items for May and Jun
private function hidePoints():void
for each(var obj:Object in expensesAC)
if(obj.Month == "May" || obj.Month == "Jun")
if(parseInt(obj.Expenses) > 0)
obj.Expenses = -obj.Expenses;
expensesAC.refresh();
private function showPoints():void
for each(var obj:Object in expensesAC)
if(obj.Month == "May" || obj.Month == "Jun")
if(parseInt(obj.Expenses) < 0)
obj.Expenses = -obj.Expenses;
expensesAC.refresh();
]]>
</mx:Script>
<mx:HBox>
<mx:Button id="btnHide" label="Hide Points" click="hidePoints()" />
<mx:Button id="btnShow" label="Show Points" click="showPoints()"/>
</mx:HBox>
<!-- Define custom color and line style for the bubbles. -->
<mx:SolidColor id="sc1" color="blue" alpha=".3"/>
<mx:Stroke id="stroke1" color="blue" weight="1"/>
<mx:Panel title="BubbleChart Sample Example" height="100%" width="100%">
<mx:BubbleChart id="bubblechart"
height="100%" width="100%"
paddingRight="5" paddingLeft="5"
showDataTips="true" maxRadius="20"
dataProvider="{expensesAC}">
<mx:verticalAxis>
<mx:LinearAxis minimum="0" />
</mx:verticalAxis>
<mx:series>
<mx:BubbleSeries
displayName="Profit/Expenses/Amount"
xField="Profit"
yField="Expenses"
radiusField="Amount"
fill="{sc1}"
stroke="{stroke1}"
/>
</mx:series>
</mx:BubbleChart>
<mx:Legend dataProvider="{bubblechart}"/>
</mx:Panel>
</mx:Application>
Thanks,
Bhasker Chari -
Xcelsius Bubble Chart - Drill Down Issues
Hi ,
Product : Xcelsius SP 3
I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings.
The problem is with drill down
I want to drill down to a X-Y chart when I click on bubbles. Each bubble click will drill down data into that X-Y chart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Please help if someone has encountered this issue. There has to be some solution for this.
Thanks,
TarunHi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko -
I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?
Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either. -
Is there a way to draw gridlines at a specific point on a bubble chart?
I'm using Xcelsius 4.5 and (trying to) creating a bubble chart. I am using static min/max values for the x and y axes, but rather than drawing the gridlines in 1 or 2 divisions (i.e. the midpoint), I want to draw a grid line (both x and y) at a specific point -- is there any way to designate this point in Xcelsius?
I figured it out - I just adjusted my formula to draw the min/max such that my intersection is always the midpoint
Maybe you are looking for
-
How do I output a large Ai file as multiple PDFs (via views, pages, whatever)
I am working in FreeHand 10 and Illustrator CS3 on a large street map. The client wants to do his own edits to the map in Illustrator (version unknown) then output it so he can show a section per page, in an atlas he plans to publish. And maintain th
-
Should I take the hard drive out of my 2008 Intel 24" iMac
I have a 24" 2008 iMac with a 500Gig harddrive running the latest OS and it is really running slow (pinwheeling etc.) I've maxed out the RAM and I'm not sure if I can get it to run any better. I've cleaned up the drive using repair disk permssions e
-
Google calendar sends e-mail reminders, iCal shall not trigger Mail
I am using several Google calendars. I configured Google calendar to send reminders via e-mail. Unfortunately, iCal tries to do the same now. So for every entry in one of my Google calendars, Mail appears and wants to send a reminder e-mail ... Very
-
Integration of BIP Report file bursting with Unix FTP directory(using IBot)
We have a requirement for dynamically creating the folder in FTP server, which gets the bursted file when a BIP report is executed. We have used the following approach: Created a IBot with Custom Java Program which creates a folder dynamically in FTP
-
Is it possible to transfer a database from SQL Server 2012 to SQL Server Express 2012?
Is it possible to transfer a database from SQL Server 2012 to SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?