Buddy appears active when in .Mac but not AIM?

I have the exact same buddy list for both my .Mac and AIM logins as I imported one into the other with AOL Instant Messenger. The odd thing is, when a certain buddy is available, they don't appear to be available when I'm logged in to AIM, but do when I'm logged into my .Mac account name with both iChat and AOL Instant Messenger. Any idea why this may happen? I verified with them on the phone they were connected at that time.

I have the reverse problem, and haven't seen/found a solution.
I use the same buddy lists. When I log into iChat with my AIM account, certain buddies show up. When I switch and log into iChat with my.Mac account, some don't show up, though each user on my buddy lists is listed with the same account info?
Any thoughts?
I have the exact same buddy list for both my .Mac and
AIM logins as I imported one into the other with AOL
Instant Messenger. The odd thing is, when a certain
buddy is available, they don't appear to be available
when I'm logged in to AIM, but do when I'm logged
into my .Mac account name with both iChat and AOL
Instant Messenger. Any idea why this may happen?
I verified with them on the phone they were
connected at that time.

Similar Messages

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Purchased music appears in iTunes on Mac but not on iPhone

Hi all,
Have recently signed up to iTunes Match but I have a silly question. All of my songs now appear in the Music App on my iPhone except for all my purchased music which appears only in iTunes on my Mac.
Am I doing something wrong?
cheers
Jools
Bath, UK

Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I have a new keyboard and two of the keys are inverted when I use my Mac -- but not on the Mac at the Apple store. The @ is where the should be and visa-versa. That is, when I type the @ I get and when I type the I get @. I am in Français numérique.

I have a new keyboard and two of the keys are inverted when I use my Mac -- but not when they put that keyboard on the Mac at the Apple Store. The @ is where the < should be and visa-versa. That is, when I type the @ I get < and when I type the < I get @. I am in Français numérique. Thanks

Try a SMC reset, please do it 2-3 times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
Any help would be appreciated.
Thanks!
Rich Oliver

Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue. I think it might be a timing issue with how lightroom interact with a slower write delay using network shares. I suggest you also chime into this thread: Lightroom 5 can't write metadata to DNG files I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

Transfer from pc to mac. code number is on the mac but not appearing on the pc

Using migration assistant to transfer from windows to mac. Almost there but code is appearing on mac but not on the pc. have tried a number of times. any ideas please?

The sharename would refer to the shared folder, directory, or drive on the server side. Perhaps the following will be more helpful:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1161.html
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1163.html
http://joelshoemaker.com/computer/mac/macfilesharing.html

Map Widget - Works on Mac but not in Author

OK, I'm a nube when it comes to Dashcode just so that's out there. I managed to build a custom map widget with Google Maps. The widget works perfectly on my Macs but not in Author. In Author the default place holder remains empty. If I click "edit HTML" I get the Google map, but it's just a generic USA, not the one I created w/ places. Also iBooks refuses to import the book to my iPad until I delete this map.
Do I need to do something or insert special code in Dashcode to make this widget "Author compatible" or are map widgets not allowed?

jfk0404 - I believe that what you're referring to as the "unattractive cartoon-like figure in the widget" is actually the placeholder image for the widget as it appears inline on the page. Once you click that cartoon image the actual widget takes over full screen and loads the html content displaying a functional full size google map.
To replace the cartoon icon you have a few options. The first thing to do is create a new .png file to represent your widget as the placeholder image enticing your readers to click to open the full screen widget and load its dynamic contents. Perhaps a screen grab of your map would be a good idea?
Easy:
Drag your brand new .png image from the Finder into your open source iBooks Author file dropping it on the cartoon image. Done.
More Complex:
Right click (control-click) on the xxx.wdgt file that downloaded from http://classwidgets.com and choose "Show Package Contents." A Widget file is really just a special folder bundle with a .wdgt extension. In there you will find the Default.png file. Highlight the file and press the space bar to see a preview in the Finder's QuickLook feature. That's your cartoon image. Now replace that file with the one you created above. Done.

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

I-pod touch works on a Mac but not a PC

Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

I can connect to MAC but not my PC

I have a new Nano, that connects to Mac but not my PC. When I try to connect to PC it says "iTunes as detected a Macintosh formatted iPod. You must restore this iPod before you can use it on Windows."
How can I get my Nano to work on both?
Thanks!

Windows cannot read a Mac formatted disk.
You need to Restore on iTunes for Windows and it will then work on Mac & Windows.

Movie works on mac but not PC...help!

Hi!
Hopefully someone out there can help me...
I am trying to make a video play on a website that I designed. The video will play on a mac, but not a PC. When the user clicks on the link, the video (.mov) should start playing in whatever media player that computer has installed, either quicktime or windows media player. It isn't working on a PC. Maybe if I convert the video file to a windows media file or to a file that is easier read my a PC it would work? I don't know how to convert quicktime files into .wmv files.
help!!!
if you want to see the video, click on the "reel" link of www.williamday.net, then click on "reel" again in the middle of the page.

The problem is your page code (or lack of it).
You are directly linking to the file and bypassing any browser plug-in.
http://docs.info.apple.com/article.html?artnum=61011
http://developer.apple.com/internet/ieembedprep.html

Custom Dashcode widget works fine on mac, but not in iBooks

I wrote a dashcode widget that works fine on my mac but not in iBooks, what am I doing wrong?
I am trying to create a widget that performs a specific calculation when the user inputs the 2 variables. However when I go to preview it on my iPad, the button that performs the calculation disapears. It is visible in the thumbnail, but once you launch to full size... bye bye...
Help is appreciated. Are buttons not allowed?

tk0us wrote:
it sets the size of the widget when displayed as a widget full screen or whatever size the png is
That is not correct. What sets the size of the widget when it runs is the canvas size of the widget, not Default.png.
At the link below, you can find a widget with a Default.png of 140x200 pixels. When you run the widget, it displays at 900x607 pixels.
http://www.triodia.com/staff/michi/drumming/RopeCalc.zip
This demonstrates that Default.png has nothing to do with the size of the widget when it runs. Default.png need not even have the same aspect ratio as the widget canvas.
Michi.

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

USB disk connected to TC shows on one Mac, but not the other

Hi guys!
The Time Capsule works just great! I'm running it bridged in my existing network, with WiFi turned off.
And the USB disk shows fine on my Mac, but not on my colleagues' Mac. TC shows on both. What am I missing here?
The USB disk will serve as "file server" and will be backed up onto TC together with the macs.
Update: Whoa - now it suddenly shows up on both machines. Go figure.
Message was edited by: Niklas Wikman

Navigate to your Applications folder.
Right Click on iTunes and select Show Package Contents.
Navigate to Contents/MacOS/
Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
Open System Preferences and go to Users & Groups.
Select the Login Items tab to view the list.
Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
Delete it from Login Items on the Mac you don't want it to start iTunes on.

Buddy appears active when in .Mac but not AIM?

Similar Messages

Maybe you are looking for