Budget 2007-08 issue- CIN

Hi,
In the budget 2007-2008, there is introduction of Sec Education cess of 1%.
we have proceeded as per the master sap note 1032265 for budget 2007-08.
<b>issue</b>
the value of secondary education cess is not getting transfered to the register., means the value is not getting loaded in the registers.
as an example
if my BED is RS16, Educ Cess is RS 0.32 and secondary educ cess is Rs 0,16 on PO of Rs 100, then
Rs 16 and Rs 0.32 is getting update in cenvat regsister but not RS0.16
please help
regards
Ajay

dear santosh,
since we are in ITG phase of project, i am capturing excise invoice in MIGO and then doing MIRO.
then J2I6 - Print Utility program
then i am selecting RG23C PART 2.
i see the sum of BED and education cess not the secondary edu cess
thanks and regards
Ajay

Similar Messages

Regarding SAP notes for Budget-2007

Hi all
can anybody tell me the sequence the sap notes for budget 2007
as our client using 4.6 C version of SAP
helpful answer will get awarded
Thanks in Advance

hi Santosh
thanks for reply really valauable answer u have given
actually we r going to implicate the CIN for Budget -2007 and the current pacakge they r using is SAPKIPNG07
could u tell me please how to upgrade the Patch level actually i didn't do any upgrade but i will have to do
please give me the response of this
thanks

Icloud 2.0 and outlook 2007 send issues

icloud 2.0 and outlook 2007 send issues
i cannot send email any longer in outlook 2007

Look at this discussion:
Re: Excel 2007 problem opening xlsx files when iCloud control panel is installed
.... and the problem is still not solved (iCloud 3.1.0.40) and I guess will never be. We need to rename or delete the shellstreams.dll or save the excel-files as .xls to solve the problem for ourselves!
What a shame!

Budget error while issuing stock to the project based production order

Ours is project based Engineering company, we mfg euipments for the client which is part of the project.
We define separate WBS element for equipment to be manufacture & create reservation under this WBS element.
Secondly we follow production process through PP & define BOM for equipment which contains component rquired to mfg the equipment. To control cost(budget) component group wise we create separate sub WBS element for each component group(plates, motors etc) under above equipment WBS element
Kindly refer e.g.below
1. Equipment (Finished code) to be manufacture is attached on WBS MYC-210952-06-03
2. Production order(1003780) created with reference to above WBS element
3 Material procured under WBS MYC-210952-06-03-001
4. Stock available under WBS MYC-210952-06-03-001
We would like to issue material available under MYC-210952-06-03-001 to production order which is attached to WBS MYC-210952-06-03. (Tcode MB1A)
System allows to issue stock, but gives budget error.
Is it possible to transfer budget auto in the transaction MB1A itself from MYC-210952-06-03-001 to MYC-210952-06-03 or what is the best solution available for above situation.
Kindly confirm.
Thanks & regards
Sanjay Karnekar

Hi Sanjay,
You have consumed a budget at lower level WBS for material procurement. And at upper level you want to do stock transfer.
But while doing budget allocation you have distributed the budget from Upper level to lower level so there is no distributable value is avaialble at upper level for the amount of the materail stock you want to transfer.
In this either you have to keep your all budget values at upper level where your doing equipment aeembly and not distribute the budget further at lower level.
Now you alredy this so you cant do anything.
Now you have following option available with you. You have perform following activity by the given sequence.
Deactivate the Budget check by CJBW
Do your stock transfer
Do budget return by CJ38 from level WBS to upper level WBS
Now Activate the budget check by CJBV.
regards,
Pradeep

Exchange 2007 Version Issue

We are installing an Exchange 2013 Server in a small environment with an Exchange 2007 server.
When going through the Readiness Checks during the Exchange 2013 Install it fails for the following reason:
"All Exchange 2007 servers in the organization must have Exchange 2007 SP3 or later installed."
This is an issue because on SP3 has been installed on the Exchange 2007 server, but when looking at the version in EMC it shows as (8.1) which corresponds to SP1.
I checked out the following blog post, and it states to check version based on the properties of the EXSetup.exe file.
http://blogs.technet.com/b/exchange/archive/2010/03/08/3409469.aspx
When I did this, I found that the version installed is in fact:
08.03.0342.004
Which corresponds to Exchange 2007 SP3.
While most posts seem to say "It's fine, the server is updated without issue", this is a problem for me because it won't let me install Exchange 2013 in the environment.
Anyone have any ideas to how to resolve the issue with the Exchange 2007 server, or to continue the installation of Exchange 2013.
Thank you,

Hi Gabriel,
You need to have Exchange 2007 SP3 RU11 inorder to bring exchange 2013 in the environment.Only then it will allow you to install Exchange 2013.
I would suggest you to install the latest rollup Exchange 2007 SP3 RU12 and proceed with Exchange 2013 installation
link for Ex2007 Ru11 -
http://www.microsoft.com/en-us/download/details.aspx?id=41393
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish
website - exchangequery.wordpress.com

After upgrade to crm 2007 31 issues in genstatus

Following an upgrade from CRM 4.0 sp 6 to CRM 2007 sp4 we are getting the following errors in genstatus. Anu idea as to how these can be resolved. i have not been able to find any specific information on oss or in the forums on these specific issues
Thanks in advance
Eddie
Object Name     Gen. group     Generator     Status     Type     Message text
ATTACHMNT_WR              CG     GNREP          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
CPSTOCK                   CG     GNREP          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
DNL_MAT_BOMS              CG     GNREP          E     F     RO DNL_MAT_BOMS: Could not determine generated name of LOOKUP TABLE PASRRL
DNL_SCE_PROD              CG     GNREP          E     F     RO DNL_SCE_PROD: Could not determine generated name of LOOKUP TABLE PASRRL
DNL_SCE_DWNL              CG     GNREP          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
MSV_IBA_WRITE             CG     GNREP          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
MSV_COUNTER               CG     LUTAB          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
MSV_COUNTER               CG     GNREP          E     F     Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
PRDCT_OBJECT              CG     GNREP          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
PRDIMAGE_WRITE            CG     GNREP          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
PRDCT_OBJECT              CG     LUTAB          E     F     Could not update reference to old MSG-segment 41DEDDEF72966C21E10000000A114EEA
0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71     PUBLI          E     F     RO PRDCT_OBJECT: Could not determine generated name of LOOKUP TABLE PASRRL
F000000274CG 669DF721A26C3440B5946C76EA44286D     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
F000000273CG CDF390E3E874144F8399B0F88E37F9F2     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
S000000053CG C44D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
S000000040CG B54CE6CE4A1DD5118BC5080006277F8D     PUBLI          E     F     RO DNL_SCE_DWNL: Could not determine generated name of REFTABLE
S000000052CG 364D26F0331DD511AE6A0800062AF6C0     PUBLI          E     F     RO MSV_IBA_WRITE: Could not determine generated name of REFTABLE
S000000224CG 52EFC89F18E418488ED3DE4344181220     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
S000000269CG F18231121882F649AB67D87D78E561E7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
S000000282CG 4DD04CE77588DB4AB44607BF0D3F9954     PUBLI          E     F     RO CPSTOCK: Could not determine generated name of REFTABLE PASRRL
SP5C000001CG PRDIMAGE_WRITE_____ICGSP5C000001     PUBLI          E     F     RO PRDIMAGE_WRITE: Could not determine generated name of REFTABLE PASRRL
SAP0000053CG ATTACHMNT_WR_______ICGSAP0000053     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
SAP0000050CG ATTACHMNT_WR_______ICGSAP0000050     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
SAP0000051CG ATTACHMNT_WR_______ICGSAP0000051     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
SAP0000052CG ATTACHMNT_WR_______ICGSAP0000052     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE
ZCRD000032CG FFA0E404D416A446AC0B9EE32E5D38D7     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000111CG E06A7B3D5B9CBB44B30D744E67F37A67     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000060CG B1E93D30074F224C8CB460C0DE753C64     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000035CG C006C84A5FB59B419802AB2B80E951DE     PUBLI          E     F     Generation error REPL_TEMPLATE_SUBCHECK
ZCRD000015CG 6B476D2EBB032D40B8C30797E75D3135     PUBLI          E     F     RO ATTACHMNT_WR: Could not determine generated name of REFTABLE

Hi Kai/Mike,
Thanks for the inputs, but i'm still clueless about what to do, here's what i understand:
- We have to transport customizing from CLNT 000 to other working clients.
But our problem are:
- We dont know what all customizing entries are missing, there are few we know because we are working on those (in CLNT 400), but we are afraid there may be much more thats missing.
- If i want to transport SAP Standard entries how to go about it, do i have to include every customizing node in transport request, if i can do that.
I'm kind of confused on "How to include SAP Standard Customizing Entries in a transport request (from CLNT000) to transport to another client". Let's say i want to transport everything under "Funds Management" in SPRO, from CLNT 000 to CLNT 400.
Regards,
Vikas

Snow Leopard and Exchange 2007 Configuration Issues

I know this topic may have been covered in here previously but I have yet to find a solution.
Here is the background. Our CEO has a Mac Book and two weekends ago he updated to Snow Leopard and now wants to use the Mail client on his Mac rather than OWA to get his email. We have Exchange 2007 (I am the Admin) and have all the latest patches and Roll Ups installed. We run OWA without issue and have 10 iPhones working perfectly (i realized they use different technology to sync). I enabled EWS by following this link http://technet.microsoft.com/en-us/library/bb201695.aspx and this is the actual command i used:
Set-WebServicesVirtualDirectory -identity exchaname\EWS* -externalurl https://webmail.domain.com/EWS/Exchange.asmx -BasicAuthentication:$True
Seems to have run properly and there are no errors reported.
Now when I go to connect using the Mac it does not Auto Discover and I must enter manually. I enter what i think it needed and its not working. On the Account Information Tab I have the following:
Description: generic name
Email Address: [email protected]
Full Name: The Person's Name
Internal Server: webmail.domain.com *Not sure what should be here
External Server: Webmail.domain.com *Again not sure if this is correct
Username: AD user name Also tried domain\username
Password: AD password
Ougoing Mail Server: not sure what should be here
Next is the Mailbox behavior Tab:
Did not change anything
Advanced Tab:
Internal Server Path: EWS/Exchange.asmx
Port:80 SSL unchecked
External Server: EWS/Exchange.asmx
Port: 80 SSL unchecked
I get no connections and I am sure somehting is not correct in the above but I am lost and new to Exchange as it is. Also new to Mac's
Help Please

We are already using webmail.domain.com for our OWA URL, well actually it is webmail.domain.com\OWA. Would I need one for the EWS & Autodiscover to use webmail.domian.com\ews?
We have rules in the firewall for Exchange and OWA. Would we need another for this?

InfoPath 2007 forms issue in SP2013

I am upgrading MOSS 2007 site into SP2013, after I finish migration and upgrade, when try to fix the connection and upgrade InfoPath forms, I reached to the point that there are no errors in the form, but when upload the form template as admin approved templates,
and activate the template for the site collection successfully, when I try to load the form, I receive an error:
"The form template failed to load."
I reviewed the event log, and I find the issue similar to the following KB article.
https://technet.microsoft.com/en-us/library/ee513112%28office.14%29.aspx
Any solution for this issue?

check the SharePoint logs. If necessary, crank up the logging levels for InfoPath.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Project Budget Return Currency issues

HI,
my business has the following issue:
The Investment Management happens in Controlling Area currency (USD), while distribution of budgets to projects, spend & budget return happens in Local Currency (say EUR). So when project has a left-over of a budget that they want to return, they take EUR balance, convert it using budget rate of the day to USD equivivalent & make return. This creates an artifitial USD balance.
For example, 100 EUR were distributed to the project, 80 EUR spend, 20 EUR returned. EUR balnce is Zero, but USD will have some artificial balance arrised due to different rates applied on spend & return.
So I wonder what other companies normaly do with it? My business came up with a requirement of the following report:
Re: How to build Project Budget report with "IF-then" formula?
Many thanks in advance,
Daria

Hi Daria,
My recommendation is to align budget profile settings between IM and PS, means using the Object Currency for both.
I do believe you have one IM program per country, therefore the Object Currency is possible to be used.
Regards,
Paulo

Budget accounting cycle issue

Hi friends,
I have a PO which was created and approved when Encumbrance was turned off (purchasing > setup > Organization > Financial options > Encumbrance tab) in the system (oracle 11i). but presently Encumbrance is enabled in the system and all the check box are checked in Encumbrance Tab. Now if i do invoice and make payment against that PO will it cause any Budgeting problem. I have tried this in our TEST instance and was successful. but i suspect it may cause problem later with any of the budgeting issue or may be in reporting. pls instruct me should i do it?
Thanks,
LISAN

and please share any budgeting documents, budget accounting cycle document.
Thanks you all.

SharePoint 2007 performance issue after upgrading the operating system

We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344

Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue

Excel 2007 HTML issue losing pictures on saving.

We have an excel document that we download from a website and then save to the desktop. We then open the document and make changes then save we lose the pictures that were there previously. The strange thing is this was not an issue until we moved to office
2007 excel. We have installed the latest service packs to office and windows XP and cannot find the problem. We have tried saving in all different formats and the logos will not appear after we save the changes. Another interesting note is that if we install
office 2010 the problem goes away. Has anyone experienced an issue like this?

Hi,
Based on my research, the image may not be in a format that can be displayed in Excel. I would like to confirm the type of the image.
You can try to save the image in other types, such as JPG, and then copy it to Excel. Check again if the problem occurs.
If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Best Regards,
Sally Tang
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]

Exchange 2007 Mail issue, server rejecting password

Hi all.
We have installed Exchange 2007 server today and configured it and all windows clients and iPhones. windows clients on normal RPC settings and laptops on RPC over HTTP.
Webmail has also been configured which works fine with a trusted root certificate. webmail works fine in safari also.
we have a problem configuring Mail on two SL macbooks. when running the setup and entering the password the client app comes back repeatedly and says 'The Exchange 2007 server “exchange.domain.co.uk” rejected the password for user “username” '
i have tried this on both machines and im kind of stuck since the exchange server is fully function for all other devices.
For info, the exchange server is on SP1 rollup 9. running on windows server 2008 R2 x64
i changed the outgoing server field to be the internal IP just to check and i get the prompt for the SSL (obviously since the SSL does not include the IP. i click to import and accept which it does but i still get my password rejected.
Any ideas?

Seems like an issue with a December update. I found the following info that basically tells you to go to IIS SSL settings for the OWA (and related sites) and change the client to "accept certificate". It worked for me so hopefully this will help someone else.
The following text was found on:
http://social.technet.microsoft.com/Forums/en/exchangesvrgeneral/thread/383d130e -869f-4fce-9502-8b340904b0ba
EDIT: Found a fix for me potentially via - http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploy/thread/c1e72d 2a-d360-4ff0-b2f5-1a9ae149df18 and http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=micro soft.public.exchange.admin&mid=00d4a681-f588-4eed-b4f8-5c3645e7376c&sloc=en-us
I had an issue similar to this. Win2k3 Ex07. All of my Outlook 2007
users were getting prompted over and over for the username and
password. It wasn't checking the certificate that they had installed
via internet explorer. To fix the problem, I opened IIS on the
Exchange server and checked the following directories under the
default website (the root site(default web site), oab, autodiscover).
Under the directory security tab, click Edit in the Secure
Communications section. I had the require SSL checked and the 128bit
encryption, but under Client Certificates, it was set to ignore. Once
I changed that to Accept for each of the folders, stopped and started
IIS, I stopped being prompted all the time for credentials. Hopefully
this will help someone in the future.
Just confirmed fixed for client!!!
-IL

Does Mavericks 10.9.4 Fixes MacBook Pro (2007) Overheating Issues?

I updated my wife's MacBook Pro 15" (late 2007) with Mavericks 10.9.2 when it was current, and the laptop was getting ridiculously hot. So we waited for the next release, 10.9.3, and it was still running hot so I reinstalled Snow Leopard.
The problem what that while going to sleep, either lid closed or opened, the laptop was stil running and running very hot with the fans constantly running. After a while, it would crash and keep on staying very very hot with the fan still going strong. A hard reboot is required to stop this.
Does anyone had issues with this and can confirm if 10.9.4 fixed it? I would not want to keep on formatting and reinstalling OSes for fun...
Other information:
I always install from a boot USB key on a freshly formatted disk (no updates here).
I also tried the usual PRAM and SMC reset a few times while on Mavericks with no success.
It's not an app as it was behaving like that right after the install and before I installed any app.
I also uninstalled a bunch of apps (like Office 11) one by one and nothing ever fixed the issue.
We would really like to use Mavericks on that MacBook Pro. It's quite a stable little machine with a brand new board from last summer (it was affected by the ATI GPU recall and the Apple Store replaced the board). I have also cranked up the memory to 6GB (it was also overheating before I replaced the memory) and when going back to Snow Leopard, I installed a little SSD (Crucial m500 120GB) for speed.
Any help would be appreciated!

One option is to create a new partition (~30- 50 GB), install Mavericks, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. That keeps you from having to re-install another OS again.

Outlook 2007 export issue to Outlook 2011 MAC

I am trying to import my email inbox from Windows Outlook 2007 to Mac Outlook 2011. When trying to create the PST file I get an error message "message interface has returned
an unknown error." So how do I remedy this so that I can export from PC to Mac?

Hi Lex,
From the description, you got the error message "message interface has returned an unknown error." when exporting Outlook data to a PST file, correct?
Based on my research, this issue may happen if one of the following two conditions is true:
There is some internal problem with Microsoft Outlook messaging interface.
There is corruption in PST file.
If it's due to Microsoft Outlook messaging interface, this issue should be fixed after restarting Outlook. If it is caused by Outlook PST file corruption, we can try using the Inbox Repair Tool (Scanpst.exe) to scan and repair your PST file. By default,
we can find the Scanpst.exe tool under:
For Outlook 2007 on a 32-bit version of Windows:
<disk drive>:\Program Files\Microsoft Office\Office12
For Outlook 2007 on a 64-bit version of Windows:
<disk drive>:\Program Files(x86)\Microsoft Office\Office12
For more information, see: https://support.microsoft.com/kb/272227
In addition, if your PST file is too large and exceed the maximum size limit, it may also cause PST file corruption. In Outlook 2007, the PST file size limit is 20 GB. Please make sure your PST file doesn't exceed the limit.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Budget 2007-08 issue- CIN

Similar Messages

Maybe you are looking for