Budget availability for commitement despite service entry acceptance

Hi Experts
I have WBS budget 1000 INR, Then created commitment for 1000 INR.
Sbsequently I have service entry created and appoved.
How ever, I have invoiced for 900 only.
I wish to get the remaining 100 to be available for commitment for creation of new PO on a different vendor.
Please advise the possible options
Warm regards
ramSiva

Follwoing options are available
- Block the purchase order item.
- Reverse the existing service entry and create a new one with Final entery indicator set.
- I it is a LIMIT service order, reduce the " Overall limit" to match the actual amount.
Rajesh

Similar Messages

I have a hard time understanding why I can't contact support about YOUR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the

I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!

Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

BAPI to post service entry acceptance

Hi,
Am looking for a BAPI which can be used to post an acceptance for an existing service entry. Found that BAPI_ENTRYSHEET_RELEASE only works if the service entry is subject for release and does not work for this scenario. Could not use BDC as would need to trigger this in the background. Any suggestions? Thanks.
Joel

Hello, Gregory...
Hi Guillermo,
I've tryed with this FM by 2 ways:
- Manually: deletes the Entry Sheet.
- Programatically: didnt do anything, gives the error: E SE 214 Error during update.
I only want to revoke the acceptance, I dont want to delete the Entry Sheet.
Could you tell me how to that?
Regards.
Gregory.
Im facing a similar problem executing BBP_ENTRYSHEET_CANCEL, in my process I execute BAPI_ENTRYSHEET_CREATE after then I recieve the error...
I think it is some trash in execution context....

User-Exit / Badi for ML81n (create service entry sheet)

Dear experts,
I am looking for a User-Exit / Badi for ML81n (create service entry sheet), which will enable me to compare its date with the referenced PO's item's delivery-date, befor saving , and send an error message (with no update) if the check is not OK.
Remark : I have tried MB_DOCUMENT_BADI but with no success because you can't send an error message from it.
Thank you
Yaacov

hi check below thread
User-Exit for Service Entry Sheet via ML81N?
regards
vijay

WBS Commitment during service entry sheet

Dear SAP Guru,
I have one query related with punching of service entry sheet with reference to PO of proejct WBS.
I have made one service PO with accnt.assignment category P and item category D, i have assigned one WBS element in account assignment tab.
Now I am entering service entry sheet w.r.t. this service PO, the service entry is posted.Acceptance is still pending.
so no accountng docs.is generated.
Now I have made again One similar PO by taking the same WBS as taken is previous PO.
While entering SES, System is allowing to punch the service entry sheet. Is this possible?
Are there any committment created by SAP w.r.t WBS if we are entering SES with same WBS again and again?
Is there any logic,report or transaction available in SAP?
Regards,
Ravi

Hi,
Please check the below links..
Total Commitment Report for Cost Centres, WBS & Orders
/thread/1393246 [original link is broken]
http://help.sap.com/saphelp_ides/helpdata/en/fd/45af5d9d6411d189b60000e829fbbd/content.htm
Hopt it may help you..
Kuber

Budget problem for External processign Service

Please note that , we have created a network for supply of Services from Vendor A and placed the PO for Rs.1,00,000/-
Vendor has done the 45 % work and subsequently service entry sheets are posted for the same.
But then Vendor expressed his inability to complete the rest of the work and we have to place the PO for balance 55 % of work
When we try to create separate line item for the balance activity, system is giving the error msg as Budget exceeded.
The entire budget might have been locked for the first PR.
How to transfer the balance budget and make available for the new PR..
Please help

HI,
i think you have creted one service activity and created PR for that activity and w.r.to this PR- PO against VENDOR A
Just edit PO against vendor A - change qty/ work from 100 to 45 and close the PO.
raise another PO against Vendor B- for remaining qty/ work - 55 w.r. to same PR.
Venkatesh.

Service PO - Invoice verification before Service Entry / Acceptance

Hi SAP Gurus ,
I have following question ,
I am creating a Service PO with A/c assignment category K & Item category D .
system automatically proposes GR Based IV tick for this combination .
I want to post the invoice first & then do the service entry sheet / acceptance etc.
but it is not possible as i get an error message as follows
" Valuated Goods receipt without GR Based IV is not allowed for external services "
I tried changing message as a warning but no use .
Is it possible to achieve Invoice - service entry sequence for this type of PO .
Can anyone pls. answer this ?
Thanks ,
Prasad G

Hi
As per standard service entry sheet has to be accepted before invoice verification is done.
If you want invoice to be done prior then uncheck gr-based po field in purchase order and try posting invoice.
hope it helps.

Workflow for Release of Service entry sheet

Dear All,
I have a requirement wherein I need to send a work item once the user releases the
service entry sheet. To my knowledge there is no event as release for service entry
in workflow.
Thanks in anticipation.

Hi,
Yes you are right there is no standard event for SES Rel.
I also have created customized WF which triggers on event created and Wait until it released.
Regards,
Purvesh.

Want to change my existing Release strategy for - PR, PO & Service Entry

Hallow Experts ,
Here i have a requirement to change the existing Release strategy for Purchase Requisitions, Purchase Order and Service Entry sheet. Already There are unreleased Purchase Requisitions and Purchase Orders in Production system with the existing Release strategy.
1. My Query is Before making change in Existing release strategy, should I need to release all PR and PO with unreleased status.
2. In PO scenario is like this, we have 4 purchacing groups and 4 document types(ZLOC,ZIMP,ZSER,NB) in release strategy, we need to add one more purchasing group that is to be aplicable to my service PO(ZSER) only . so should I need to creat another stretegy for the same, or I can add in the same strategy
thanks in advance.
regards
vb

Dear Vikrant,
1. My Query is Before making change in Existing release strategy, should I need to release all PR and PO with unreleased status.
Sol: Not Required but , doing it is recomandaed
2. In PO scenario is like this, we have 4 purchacing groups and 4 document types(ZLOC,ZIMP,ZSER,NB) in release strategy, we need to add one more purchasing group that is to be aplicable to my service PO(ZSER) only . so should I need to creat another stretegy for the same, or I can add in the same strategy
thanks in advance.
Sol: No Only thing you have to do is that go to your class 32 and chek what is the charaterstic define for the purchasing group copy it
2 Now go to Tr.code: CT04, give that charaterstic and go to change mode and give the additional Purchasing group there, and save it
3 Now go to Release strategy where you want to add that Purchasing group, go to classification tab and tik that new purchase group , that group will now in fact of release Strategy

Release strategy for PO and Service Entry Sheet

Hi
I maintain characteristics- Plant, Doc Type , Order Value & Purchasing Group for PO release strategy.
should I maintain the same characteristics for service entry sheet ?
the approval will be the same for both

Hi,
The Po reselase strategy can be set up separately from the entry sheet release strategy, so you can use even different characteristics for your entry sheet release strategy. These are not connected!
Please read note 672719 question 5 - How can I set up a release procedure for service entry sheets?
Note: The release strategy must be based on the structure CESSR.
The PO release strategy is based on the structure CEKKO.
For the SEs release strategy you must create a different class.
Regards,
Edit

Authorisation for reversal of service entry sheet

Hi,
I want to restrict some of the users to do reversal of service entry sheet, hw can i do this? what is the authorisation object / field to restrict this
Regards,
Kalpesh

Kalpesh,
Please use authorization object M_EINK_FRG
Please open the below link also:
http://sapass.metro.client.jp/Bapi/BUS2091.htm

Budget control for commitment item and WBS

Hi all,
We assigned cost center in certain WBS, also create budget for this WBS. Since we activated funds managenet(FM), for all the postings which posted to this WBS, system will control budget for both WBS and commitment item, however, we just would like to control budget for WBS.
Would anyone know how to do that? thanks.
Ben

Dear Lovewidow,
Can you give more details about your problem.
If there are still costs showing in your WBS reports you may have to run the report CJEN and CJBN which are reconstruct availability control.
Regards,
shareeq

Data Collector Reports not available for SQL Reporting Services only SSMS

I never understood this one, why would you program Reporting Services (SSRS) reports inside SQL Server Management Studio (SSMS)?
The reports are available only through the SSMS interface, buried somewhere in the GUI, not easy to find.
Please make the MDW reports available on Reporting Services!

Hello,
These are not SSRS reports, these are RDLC reports for local rendering in a client application like SSMS; similar, but not the same. The reports are embedded as a resource in an assembly, that's
the reason why you can't find them.
You can have a SQL Server installation without Reporting Services; where should be the reports hosted then, if not in SSMS?
You can create your own SSRS based report; simply use SQL Profiler to capture the queries used by the origin reports.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Soap Tester in WL 7.0/Workshop available for other generated services?

When creating a web service using WL 7.0/Workshop I get a Soap Tester. If I create
a service in WL 7.0 using an Ant task service gen or client gen will I get a Soap
Tester? What about web services written from scratch within WL 7.0? Any feedback
would be appreciated.

Hello,
As Don said, a home page for your webservice is generated automatically
for you.
For example, visit: http://webservice.bea.com:7001/index.html and click
the first entry "WeblogicEchoService" you will see a page that was
generated by WLS providing a test link for each method. You can then
invoke the service and see the generated results.
Hope this helps,
Bruce
Don Ferguson wrote:
A home page is automatically generated for each deployed web services
which includes the ability to invoke it, and see the XML request and
response.
Bill wrote:
Will I have to construct a Soap Tester or will WL provide one for me
like they
did within Workshop?
Thanks
"manoj cheenath" <[email protected]> wrote:
Yes. web service generated by servicegen or written from scratch
can be tested from a web browser.
regards,
-manoj
"Bill Morgan" <[email protected]> wrote in message
news:3d7906be$[email protected]..
When creating a web service using WL 7.0/Workshop I get a Soap
Tester.
If
I create
a service in WL 7.0 using an Ant task service gen or client gen
will
I get
a Soap
Tester? What about web services written from scratch within WL
7.0?
Any
feedback
would be appreciated.
[att1.html]

Service entry Acceptance

Hi guys,
I found an issue where a user can create entry sheet, but he can't do the acceptance (in the header, there's no flag icon, and in the toolbar, entry sheet -> set status -> Acceptance.. the path is grey). How do I make the user possible to accept the entry sheet? any config for this?
thanks,
Nasikhin

Thanks,
that's right! i just needed to SU53 and sent it to basis team.
Cheers,
Nasikhin

Budget availability for commitement despite service entry acceptance

Similar Messages

Maybe you are looking for