Budget check only after release?

hi,
i maintain cost activity in project and when i save it, it checks against the budget...
is it possible such that it will check the cost activity only upon release of the activity? in other words, i can save it (even if it has greater amount than budget) as long as it is only CRTD... but when it is REL (released), it will already check against budget.
note that AVAC is already activated in order to check the other objects in the project...

Dear Ramesh,
To my knowledge u can activate availability control on networks, only for Materials by using Network type(TC-OPJK) if u define no check here system doesnu2019t check for availability. Pls check, this might help u.
If this is not the scenario what u are explaining, please explain me the way u have configured availability check on planned values. This will help all to do better R&D on availability check for planned values.
Thanks & Regards,
//sam

Similar Messages

Will it be possible to create new version of document only after releasing

Dear Expert,
is it possible to create a new version of the document only after release of the document...i don't want document version should be created other then release status.
Bhuwan

Hello,
Since you are a technical consultant also, probably you are in a better position to deside how to achieve this.
You will have to develop a user exit which will check status/ Release Indicator of Document when new version option is clicked through CV01N/ 2N/ 3N/ 4N transaction and take necessary action.
Regards,
Milind Dumbre

Entry Sheet Printout only after Release

Hi all,
I wanna know if its possible to configure that an Entry Sheet could only be printed after released?
If so, how could this be made?
Regards.
Gregory.
Edited by: Gregory Mayorga on May 28, 2010 4:21 PM

Hi,
In the IMG ->External services management->Messages->output control for
SES->Define access sequence for SES -> select access sequence 0001->
select (for example) table 506 ->fields
...here you will see that you can add KZABN to communication
structure KOMKBES. If the entry sheet was accepted, KZABN with "A" must be checked. Please create also a condition record accordingly (MN13).
Please check additionally:
spro > material management   > external services Management   >
messages   > define condition table for service entry sheet   > create
condition table
There is on acceptance on the right hand pannel under field
catalog, please make sure you select this field and move them to the
left hand panel
If this is setup correctly , then please check the following:
- the output type use for service entry sheet. If it is NEU (SAP
standard) , check the access sequence assigned
- check the configuration of access sequence, whether this customzied
condition is assigned?
- If it is assign, whether the exclusive flag is setup
if the above customizing is correct, the next step is to check the
output condition record via txn MN15 (to display)
Please also check the flags which you have assigned to your message determination schema in the customizing under "Assign Schema to Service Entry Sheet "
Regards,
Edit

Release campaign only after releasing parent marketing plan

Hi,
My requirement is, campaign should be released only after parent MP is released. System doesn't allow to release campaign without releasing parent MP by standard. But I am using all user statuses in campaign and MP. I have blocked all system statuses which appears in drop down as standard. How can I get this standard functionality with user status profile?
Please suggest.
Regards,
Nikhil

Resolved by coding.

CATS ESS Applying check only for release Action....

Hi all ,
I have one requirement for applying some chceks at the time of releasing time sheet items .
Currently I have applied the validation checks in a user exit ZXCATU03 .
But here if am applying the check its working for all levels ....
Like for SAVE , CHECK and RELEASE. but my requirement is particular one check should work only for release .
In ABAP we have option of checking the sy-ucomm
but here since the action is trgigered from Portal how to differenciate ...
how to acheive the requirement is there any way ?

I Did it by Using Export Memory Option .

Commitment only after release of purchaseorder

I'm investigating the possibilty that commitments are only registrered when a purchase order with release strategy is released.
is it possible to have no commitments of a purchaseorder until release ??
I have found this thread which is about the opposite to remove commitment afterwards ?
Commitment Release on Rejection of Purchase Requisition
can thid badi also be used to suppres commitments until release ??
We don't want to use Purchase Requisition if possible and want to create a purchase order directly with status OPEN
kind regards
arthur
Edited by: A. de Smidt on Jun 16, 2010 1:12 PM

Refer this Wiki
http://wiki.sdn.sap.com/wiki/display/ERPSCM/CommitmentsinPurchasing

Activty release should be possible only after WBS release

Hi Gurus
My customer wants release of activity only after release of WBS element. Is there any user exit available for that or can i write some validation for the same.
Thanks in advance
Regards
Abhijit Sen

Hi,
Ofcourse, you can create activities with initial user status which prohibits "release". If activities are assigned to WBS, with release of WBS , the activity also gets released. But how to change the user status (other than manually) is to be figured out.
Regards
Muraleedharan.R

Budget Check by Internal Order

Dear all,
My settings for budget checking is working fine for year 2007 (current). Once budget is created for year 2008, there will be no budget checking for year 2007. Is budget checking only applied to either 2007 or 2008? More information on budget checking by IO is much appreciated.
Thanks in advance.

Hi,
In OKOB tcode check what u have maintained in the avalibility control block:
Activation type select '1: Automatic activation during budget allocation' from the drop down menu.
Regards,

Report to run only after prompt selection

Hi all,
we are using obiee 11.1.13, We have a required prompt (with property require user input checked), only after selecting the prompt the report should run, how do we make this work.
Thanks,
Sreekanth

Hi Sreekanth,
Don't create the prompt separately. Instead create the prompt while creating the report itself (Third tab in the Create report section) . Then add this report to dashboard. Make the default selection of the prompt "None" and "Enable User Input required". Try this and let me know.
Thanks,
Arul
Edited by: Arul on Jul 25, 2011 2:42 AM

Budget check at service entry sheet release in funds management

Dear Forum,
We implemented the funds management recently we have the requirement like below
Generally in FM at the time of service Purchase order creation system will consume the budget and at the time of service entry sheet release the consumed budget in the purchase order level will adjust. Now the business requirement is that they don’t want to check the budget at service purchase order level but they want budget check at service entry sheet level.
This is the case only for service PO’s.
If anyone have same scenario please share your views.
Regards,
Ravi.

Maybe you can try having the account assignment 'U' in the service PO which will then allow you only to enter the account assignment only in the service entry sheet for budget checking.

How to response the value change of slide bar only after mouse released

Hi, all
When I used the slide bar to control my device, I response the value change of slide bar and set the new value to my device. But it will generate response constantly when I use the mouse to drag the pointer, which is not my wanted. I just need to response only after the mouse released. How can I implement this function?
Hope your suggestion, thanks a lot.
Solved!
Go to Solution.

No, not if you use the right event under "Mouse".
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

Problem in Commitment line items & Budget check

Hi Experts,
I am facing a problem in my system for Commitment line items & budget check.
I followed the below steps:
1. Created Project & structured the same.
2. Allocated the Budjet for WBS Elements.
3. Released the project.
4. The PRs are created for material and external services.
5. When I check in the report S_ALR_87013558 the commitments are not showing in the report.
6. After I performed the PO & GR (the PO value is more than the budget), still it is not producing any error message.
7. I have even consumed the material, for which the cost is more than the budget, still there is no error message from the system.
8 . I tried to perform transfer posting of the material from other plant or initial posting of the goods using 561 Q, at that time the system is producing the error message.
9. When I check the above report after GR & GI the actual line items are showing.
The problem is that why system is not creating the commitment line items.
In customization I have maintained as below:
1. Budget profile
2. Assigned the Budget profile to Project profile.
3. Maintained the tolerance limits for the controlling area and budget profile combination.
4. I have created the B/S G/L accounts as cost elements with category 90 (statistical).
5. AVAC for the WBS elements is active for the WBS elements
My doubt is:
Why system is not writing commitment line items?
Even after writing the Actual line items why the error message is not produced?
I am understanding that since the GR from PO is being done, probably this GR is not producing the error message as it is linked with the PO commitment. But at the time of GI the error message should be produced.
Can any one help me for solving this issue?
I tried searching the forum before posing, but couldnot get a relevant one.
Regards,
Praveen

Dear Nitin,
Yes I have checked it and the commitment management is active.
I also checked the table RPSCO table as well, there is no entried with the value key 21 or 22, the entires are available with 41 only for my project.
Also, I was maitaining the WBS element in a maintenance order. When I am trying to enter the materials in componenet tab, if the value is exceeding the budget value it is producing the error message.
Praveen

Budget Check

hi all,
we have the foll scenario, we create WBS element and flow budget in CRM, same gets transferred to ECC. foll are the settings , we have maintained for avl ctrl in ECC - PS
tolerance limit:
Tr gp: ++, action = 1, usage = 90
budget profile:
activation type = 1, checked overall and releases button.
i had created the WBS element in crm and then it got transferred to ECC. havent flown any budget. after some time, i had flown budget in crm, same is reflecting in ECC, but status is only REL. AVAC status was not set. So i had manually set it using CJ32.now tried creating PR/PO, worked fine.( why AVAC status doesnt get set, when budget is flown????????????)
now here is my requirement. availability ctrl gets activated only when, there is a bugdet. our users generally create the WBS element, but dont flow any budget temporarily. so for these elements, users can create PR/PO without any problem, as availability ctrl doesn't get activated. Pls suggest as to how to activate availability ctrl, even if the budget is 0.
Pls help.
Rgds,
Anitha J

Hi ,
This issue can be solve if u can restrict WBS release before budgetting in order to achieve this using user status.
For creating user status we have to use transaction OK02
Here create a user status profile with user status NBUD- Not Budgeted
Select object type as WBS element and once u double click on the NBUD - Not budgeted u can see the system status. For the system status Budgted select the radio button delete. So that when u do the Budget for WBS the NBUD status will be deactivated.Also similarly for Material PO/Material PR /WBS release status select forebidden option against the individual system status.
This user status profile u have to assign to the project profile.
If ur activating AVAC in CJ30 iteself then these settings are enough to forebid PO/PR generation before budgeting for that WBS
Rgds.

MIRO still Payment Block after Release

Dear Experts,
I got a trouble with invoice process. We are using workflow to release payment block, so that the status of the MIRO can be changed from "P Payment Request" to "Free for Payment". The problem is the status cannot be changed to "Free for Payment" even after release via workflow has been carried out. When we checked the workflow status, the workflow runs well, and the release successfully done via that workflow. Another problem is : this case happens only on several MIROs randomly. Sometimes this case happens, while in another MIRO this case never happens.
Can you help me with the problem? Is there any reason why this kind of issue happens?
Thank you very much

hi,
check the below mwntioned link.
Payment Block after MIRO posting
regards
sumit simran

Need to Change PR after Release

Hi,
We have a PR which is created and Released. It is configured in such a way that after release, changes are not allowed. Now, the user wants to change the Purchase Group field (only that field) in the PR without re-triggering the release strategy. I checked the Release Indicator in the Release Strategy and changed the field 'Changeable' to the value 2.
Now, it allows to change the Purchase Group. But, user also be able to add new line items to PR, which we don't want to allow.That means, user should only be able to change the Purchase Group field of the existing line items. No other changes should be allowed.
How we can solve this issue.. Please give me your suggestions.
Thanks in advance.

Hi Arminda,
Thanks for your reply.
I tried that. As you said, it will make all fields as 'Display' and only 'Purchasing Group' as editable.
But, the problem is, it will allow the user to add a new line item to the PR without affecting the Release Status.
I don't want to allow the user to add another line item.
Is there any control in the field 'Changeable' where we give the values 1 to 4 ? Please let me know.

Budget check only after release?

Similar Messages

Maybe you are looking for