Budget checking for Purchase Order

Hello All Experts,
Project Availability control: Tolerance limits
on All activity groups - warning message for 101%
on Purchase requisition - warning message for 101%
on Purchase Order - error message for 101%
1. Now we created a project with 5000 budget and Availability control activated.
2. We assigned material to activity and created Purchase requisition for 6000. Here system issued message there is error in commitment and allowed us to save the project.
3. We created Purchase order for 6000, system is allowing to create, that is any thing less then PR value, even though it is more than 101% and suppose to give the error.
How do we over come this situation and make the system to look Budget value not the PR Value.
Thanks,
Karthik

Hi,
you have maintained activity groups ++ so system is considering All activity groups first for budget check instead of individual activity groups(PR,PO...). remove the ++ activity group and maintain individually(PR,PO,GI...) and check.
regards

Similar Messages

Budget check for purchase order

Hi everyone!
We have NO problems with budget check for the SC. But when we create a PO and exceeds the budget no message are displayed. The only thing that happens is that the PO gets status "error in process". But if we change the PO (still exceeding budget) we receive a correct message. Is this a program error?
Sincerely
Anders

Hi
Temporarily deactivate budget check: SRM: using Badi
BBP_BUDGET_CHECK, AVC Backend customizing.
Did you do budget check while creating sc? what did it says?
Refere this old notes.
Note 740933 - Incorrct purchasing budget for currencies w/o decimal
places
Note 747143 - User purchasing budget in pop-up incorrectly formatted
regards
Muthu
Edited by: Muthuraman Govindasamy on Nov 5, 2008 3:08 PM

Budget Check in Purchase Order Delivery Schedule

Hi there,
I have created a Purchase Order with 50 units to be delivered in year 2009 and 30 units to be delivered in year 2010. An internal order is assigned to the purchase order, system prompt error message due to no budget maintained for year 2010.
Just wonder if it is possible to have the budget availability control check deactivate for year 2010, but still active for year 2009?
Please advise.
Thank you.

Hi there,
The overall is not selected. It is now checking annual budget, but due to year 2010 has no budget assigned, therefore, system prompt error message due to budget exceeded. I.e., 0 budget in year 2010 vs. the planned delivery of 30units or $30,000.
Anyway to set the system not to check budget for year 2010 but do check for year 2009.
Thank you.

Budget check for PM orders with main and sub-projects

Hello
We have a scenario wherein we have created a main project and a sub-project. We have linked the sub-project to main project. We have also assigned budget to the main project. We have created a PM order wherein we are trying to enter the costs by entering the hours of work. We have configured the budget profile and set the tolerance limites and assigned to main project. The requirement here is we need to have have costs check againt the budget that been available in the main project. But the system is checking the budget of the sub-project. Please share if any specific setting is required to check the budget of main project instea sub-project.
Regards,
Basav

I also double checked, you are right there is no forum for PM, I dont think I could suggest much since there isnt a dedicated forum, but you can try posting this query in the ABAP forum probably some abap'r who has worked with PM module should have a look. Also if possible try to connect with one of the moderators out here and ask for assistance in starting something for PM
Thanks,
GLM

Budget check for PO based on delivery

Hi,
Can some guide how to configure budget check for purchase order based on supply schedule.
This could be that you have raised a Purchase order for 12 Quantity and the delivery of the same is at 1 per month for 12 months.Budget should be checked for one quantity for one month and not based on Purchase order which is for 12 quantity.
We are using Former budgeting.
Regards,
Gokul

Hi,
I'm afraid you will have to create 12 items within the same PO and assign different delivery date to every one of them; then, the budget will be affected accordingly.
Regards,
Eli

Missing Parts report for Purchase Orders

Hey Gurus,
We are running the availability check for Purchase orders and the user group is wondering if there is a standard Missing Parts report in SAP similiar to transaction CO24 for Purchase Orders so that they can view all of the Purchase orders with missing parts.
As a side note, we are using subcontracting purchase orders.

didn't get a response.

Funds check on Purchase Order creation

Hello all,
When attempting to do funds check for Purchase Order the following error occurs.
ERROR
Procedure PSA_BC_XLA_PUB.Budgetary_Control returns an error without any details to the calling procedure PO_ENCUMBRANCE_POSTPROCESSING.execute_gl_call.Please contact your support representative.
For this issue i did below steps:
1. Navigate to System Administrator Responsibility > System > Profiles
2. Set the profile option "PSA: R12 Upgrade Date" with the date format as mentioned below:
MM/DD/YYYY HH24:MI:SS
I changed like this 04/01/2011 02:32:37
close and reopen the applicaiton. still its giving the same error.
Please guide me to resolve this issue.
Thanks and Regards,
Muthu

Hi Muthu;
There are 28 docs avaliable which is mention your error message.From search:
R12: Funds Check Error 'PSA_BC_XLA_PUB.Budgetary_Control Returns an Error' for Purchase Orders and Requisitions When Federal Financial is Installed [ID 1292042.1]
Procedure PSA_BC_XLA_PUB.Budgetary_Control Returns an Error Due To "XLA_AP_TECHNICAL_ERROR" [ID 950385.1]
R12: Purchasing Documents Fail Funds Check Or Going To Pre-approved Status Due To Budgetary Control Exceptions - Troubleshooting [ID 603057.1]
For more please make search on metalink
Regard
Helios

SAP Rules / Considerations behind ATP for Purchase Orders

Hi
Can anyone guide me to the considerations taken into account for ATP check for Purchase orders,
Kind Regards
Bhavana

Hi,
Please find the logic.
ATP quantity
Specifies the available quantity from each receipt that can still be used to cover further requirements.
Use
The ATP quantity is calculated as follows:
Initially, the ATP quantity of a new receipt is the complete receipt quantity. During the availability check according to ATP logic, the system only takes into account receipts that lie before a requirement. A requirement first reduces the most recent receipt (and thus the ATP quantity of this receipt). If a rest quantity remains for this receipt, this quantity is the new ATP quantity for this receipt and it can be used to cover a further requirement.
If one receipt does not completely cover the requirement, the system reduces further receipts and their ATP quantities until the requirement has been completely covered.
If no further ATP quantity is available to cover a requirement or if a requirement can only be partially covered, then this shortage quantity is displayed in the requirements line as a negative ATP quantity.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3764f4449a11d188fe0000e8322f96/content.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4c/227d1046e611d189470000e829fbbd/content.htm
and the above links will provide you some idea.
Regards

Sp Transaction Procedure For Purchase Order Item Checking

Hello All,
I need to create a sp_Transaction notification for Purchase Order where system will check that the document to be added
with Vendor 'A' and ItemCode 'ERT' should not be be previously added for the same vendor 'A.
Example:-
Doc No. Vendor Item Code
1 A ERT
Is added
Next if the Purchase Order is added with same vendor and same Item then system should block the entry and throw a message
'Purchase Order Already Entered for Vendor 'A' with Item Code 'ERT'"
This checking will be done for each line item of currently entered Purchase Order Document.
Thanks ,
Amit

Hello Amit,
You don't need post identical thread twice. This SP related discussion is usually posted on main forum.
Please close this one.
Thanks,
Gordon

Sp_Transaction Notification For Purchase Order Item Checking

Hello All,
I need to create a sp_Transaction notification for Purchase Order where system will check that the document to be added
with Vendor 'A' and ItemCode 'ERT' should not be be previously added for the same vendor 'A.
Example:-
Doc No. Vendor   Item Code
1                A            ERT
Is added
Next if the Purchase Order is added with same vendor and same Item then system should block the entry and throw a message
'Purchase Order Already Entered for Vendor 'A' with Item Code 'ERT'"
This checking will be done for each line item of currently entered Purchase Order Document.
Thanks ,
Amit

Hi Amit,
i found this on forum. Try this,
if @object_type = N'22' and @transaction_type in (N'A', N'U')
begin
declare @line1 int
declare @lin1 int
declare @out1 int
Set @out1 = 0
SET @lin1 = 0
Declare @Vend as varchar(200)
Declare @ItemCode as varchar(200)
Select @Vend = CardCode From OPOR Where DocEntry = @list_of_cols_val_tab_del
Select @line1 = Max (LineNum)FROM POR1 WHERE POR1.DocEntry = @list_of_cols_val_tab_del
While @lin1 < @line1
Begin
     Select @ItemCode=ItemCode From POR1 Where DocEntry=@list_of_cols_val_tab_del and LineNum = @lin1
      if (SELECT COUNT(T0.DocEntry) FROM POR1 T0 inner join OPOR T1 on T0.DocEntry = T1.DocEntry
      WHERE T0.ItemCode = @ItemCode and T1.CardCode = @Vend)> 1
      Begin
           Set @Out1 = 1
           Break;
      END
           Else
           Begin
           Set @lin1 = @lin1+1
           Continue
      END
END
Set @lin1 = @lin1 + 1
if @out1 = 1
begin
      Set @error = 1
      Set @error_message = 'Item Code in line ' + CONVERT(nvarchar(4), @lin1) + N'already Exists For This Vendor!'
End
END
Check this too Stored procedure in purchase order for duplicate item for a vendor
Thanks,
Joseph
Edited by: Joseph Antony on Jan 11, 2011 1:37 PM

PO 'No goods receipt possible for purchase order'

Hi gurus!
While trying to make Confirmation of a PO in the SRM Portal the user is getting the error 'No goods receipt possible for purchase order'
The scenario used is Classic, so PO is replicated directly to the R/3 system.
Any idea why this is happening?
Thanks a lot!

Hi, thanks for the quick reply!
Where i can check the Item category?
I found a field called 'subitem category' but it's blank
with this possible values:
1 Variant
2 Discount in kind: inclusive bonus qty.
3 Empties
4 Discount in kind: exclusive bonus qty.
5 Prepack item
6 Display item
7 Set item
8 Interchangeable items (IBU: A&D)
9 Pre-packing (SLS items)
H GT Bill of Material, Header Relevant
I GT Bill of Material, Item Relevant
About PO type i think it's EC (doc_type?), in R/3 is shown as EBP PO
I checked in backend system, in the item details > Delivery and the 'Goods Receipt' is checked.

Problem in creating a SyncBo for Purchase Order BAPIs

Hello Everybody,
I am trying to create a smart sync application for Purchase Orders.
I have used standard bapis like BAPI_PO_GETDETAIL AND BAPI_PO_CREATE1.
I have developed my own wrapper functions using these std bapis. For the PO creation i only plan to insert the necessary and mandatory data. The problem i face is that some of the tables in the create bapi which are mandatory for a PO creation are freezed in the SyncBo.
Tables like POITEMX, POADDRDELIVERY, POSCHEDULE and structure POHEADERX are all required for the creation of a PO. Without this minimum data a PO cannot be created.
After i have created the syncBo, on the mapping screen i can only see these tables under the create BAPI. But i am not able to perform the mapping of their fields. These are non-editable or i must say that they are freezed.
And if i cannot map them then i cannot pass data for them from the client. Although i can do the mapping for the table PO_ITEM and the structure PO_HEADER.
I hope i am able to expplain my problem. Kindly get back to me if i am not clear. Any sort of help is welcome.
Thanking in advance,
Saurabh.

Hi Saurabh,
Hope you are aware of the prerequisites for creating the BAPI Wrappers.
If you want to insert some data into the Business Object, then you have to include
GETLIST, GETDETAIL and CREATE Bapi Wrappers.
I think in your case,
You might not have mapped those fields in your GETLIST Bapi Wrapper.Just check whether you have mapped those fields that are necessary for PO creation in your GETLIST and GETDETAIL BApi wrapper mapping screen.
Those fields you have mapped in the GETLIST and GETDETAIL BAPI wrappers will be visible (for selection - checkboxes will be editable) in the mapping screen for CREATE BAPI Wrapper.
So first of all, you have to map fields there in the mapping screens for GETLIST and GETDETAIL Bapi Wrappers...
check this thing...
refer these links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/mobile/mobile%20infrastructure/mobile%20development%20kit%202.5/content/appdev/smartsync/introduction.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/mobile/mobile%20infrastructure/mobile%20development%20kit%202.5/content/appdev/smartsync/bapi_wrapper_types.html
In the second link, you can see one figure, which is explaining the things that are to be satisfied by the BAPI Wrappers for SyncBO creation...
Let me know If you have doubts in the prerequisite section itself...
Regards,
Kishor Gopinathan

No goods receipt possible for purchase order 'PO#" "Lineitem"

Hi gurus,
Please help on below error.
While doing return to vendor transaction using BAPI 'BAPI_GOODSMVT_CREATE' error 'No goods receipt possible for purchase order 'PO#" "Lineitem"' was encountered. As checked, all data are correct including the plant, sloc, PO#, stocks, batch.
Please kindly advice on how to resolve the issue.
Thank you in advance.

Hi,
Few things which immediately comes to my mind.
1. Check if the PO is released?
2. Check if the confirmation control is properly set in Confirmations tab of item details of a PO.
3. Check if the Goods Receipt indicator is ticked at item level of PO.
I hope these helps.
Kind Regards,
Prakash

Goods Receipts for Purchase Order using BAPI_GOODSMVT_CREAT

Hi experts,
I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
Can any one assist? is there a field I may be missing?
Here is a sample code.
DATA: gm_header TYPE bapi2017_gm_head_01.
DATA: gm_code TYPE bapi2017_gm_code.
DATA: gm_headret TYPE bapi2017_gm_head_ret.
DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
CLEAR: gm_return, gm_retmtd.
REFRESH gm_return.
Setup BAPI header
"data
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '02'.
" MB1A * Write 971 movement to table CLEAR GM_ITEM.
MOVE '101' TO gm_item-move_type .
" MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '6003022' TO gm_item-material.
MOVE '10' TO gm_item-entry_qnt.
MOVE 'EA' TO gm_item-entry_uom.
MOVE '1001' TO gm_item-plant.
MOVE '' TO gm_item-stge_loc.
MOVE '0901' TO gm_item-move_reas.
" MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
" MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
MOVE '0020' TO gm_item-deliv_numb.
MOVE '4500006881' TO gm_item-po_number.
MOVE '0010' TO gm_item-po_item.
APPEND gm_item.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header = gm_header
    goodsmvt_code    = gm_code
IMPORTING
    goodsmvt_headret = gm_headret
    materialdocument = gm_retmtd
TABLES
    goodsmvt_item    = gm_item
    return           = gm_return.
IF NOT gm_retmtd IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.

>
Spark842 wrote:
> Hi experts,
> I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
> Can any one assist? is there a field I may be missing?
>
> Here is a sample code.
>
> DATA: gm_header TYPE bapi2017_gm_head_01.
> DATA: gm_code TYPE bapi2017_gm_code.
> DATA: gm_headret TYPE bapi2017_gm_head_ret.
> DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
> DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
> DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
> CLEAR: gm_return, gm_retmtd.
> REFRESH gm_return.
> * Setup BAPI header
> "data
> gm_header-pstng_date = sy-datum.
> gm_header-doc_date = sy-datum.
> gm_code-gm_code = '02'.
>
>
> " MB1A * Write 971 movement to table CLEAR GM_ITEM.
> MOVE '101' TO gm_item-move_type .
> " MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
> MOVE '6003022' TO gm_item-material.
> MOVE '10' TO gm_item-entry_qnt.
> MOVE 'EA' TO gm_item-entry_uom.
> MOVE '1001' TO gm_item-plant.
> MOVE '' TO gm_item-stge_loc.
> MOVE '0901' TO gm_item-move_reas.
> " MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
> " MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
> MOVE '0020' TO gm_item-deliv_numb.
> MOVE '4500006881' TO gm_item-po_number.
> MOVE '0010' TO gm_item-po_item.
> APPEND gm_item.
>
> * Call goods movement BAPI
>
> CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
>   EXPORTING
>     goodsmvt_header = gm_header
>     goodsmvt_code    = gm_code
>   IMPORTING
>     goodsmvt_headret = gm_headret
>     materialdocument = gm_retmtd
>   TABLES
>     goodsmvt_item    = gm_item
>     return           = gm_return.
>
> IF NOT gm_retmtd IS INITIAL.
>
>   COMMIT WORK AND WAIT.
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ELSE.
>   COMMIT WORK AND WAIT.
>
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ENDIF.
My guess, is that this material is not really maintained in the Plant '1001', to be on the safer side, get the exact values from EKPO itself, also check if this material exists in the table MARC for the plant and storage location.
MOVE '1001' TO gm_item-plant.   "<< Hard coded
MOVE '' TO gm_item-stge_loc.
Replace the above hardcodes to something like this to get the actual value from EKPO.
select werks lgort into (gm_item-plant, gm_item-stge_loc) from ekpo
   where ebeln = gm_item-po_number
        and ebelp = gm_item-po_item.

Goods receipt for purchase order is not allowed

Hi,
When I am doing the PO receipt i am facing the error message "Goods receipt for purchase order is not allowed WBS element xxxxxx"
What could be the problem
Thanks
Lucky

Hi,
Please check the WBS element in CJ03, in Basic Data, System status,
Is the WBS is not released or blocked.
Hope it helps you.
Thanks

Budget checking for Purchase Order

Similar Messages

Maybe you are looking for