Budget detail view - Start BW report

Dear Experts,
We understood from SAP_Help that using the magnifying glass ICON in Budget Overview in SC and PO (column "Action") should start the BW report.
Does anyone know where can we define it?
Thanks & Regards,
Keren

Hi Keren,
BW reports are not "just like there". You need to customize the connection to your BW system or the one housed within SRM.
Then all the necessary settings within BW needs to take place ( activate Business Content, check the data flow, data extraction). Only with these settings the available standard report set under SRM - SRM server - Cross application basic settings - Define logical systems and template names for BW reports is capable to deliver data.
Cheers,
Claudia

Similar Messages

How to enable detail view interactive report as default for public user?

Hello all,
I'm currently developing a search results page.
I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
all worked well and looked neat but however when i pass value from my search page using IR_ROWFILTER and clear the results page using page_no,RIR, it brings me to the interactive reports result page with the default table like view.
i have to press the detail view to get it. i tried saving it as default but it wont work. this issue is for public user.
if i make the page requires authentication, and save the detail view as default i would not have any problem. i could search and it will straightly bring to the detail view of the search page.
of course the other reason i found is because im using the IR_ROWFILTER and clearing page using page_no,RIR..without it,it works well but i need it coz im doing a a search result. i need to send search text from another page and put it in the filter in the search page. i would need to use RIR to clear it for searching again.
is this a limitation for public user? it doesnt happened for authenticated user though..
how can i make this view as default for public user?

T101_cyberdyne wrote:
how can i make this view as default for public user?
Flip the report into Detail view on page load using an Page Load dynamic action with the following Execute JavaScript Code true action:
gReport.data.view('DETAIL');
I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
Do you really need this to be an IR? Other than the detail layout, do you require any of the interactive features? If not, try using a standard report with a custom report template.

Can i start a photo slideshow directly on detail view?

Hi all, Im working on my website right now, and am trying to make a photo page where the album is displayed directly with the detail view (with the small thumbnails on top), is this possible? I tried Cyclosaurus' way, but i still dont see anything happening!

I did try it, but for some reason it doesnt work, when I publish nothing happens. Even though what i really would like is to have the detail view of the pictures with the small thumbnails on the top. Kind of what I read on another thread with the code below, but it didnt work either.
<script typye='text/javascript'>
detailViewWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-detailview')[0].w idget;
detailViewWidget.postToggleNotification(true);
</script>
Am I doing something wrong? here is what Im doing:
1. I have my photos page
2. I put all the photos I want into the slideshow
3. I creat a an HTML Snippet and put either of the codes mentioned
4. I publish
....but nothing happens, either nothing appears, or the slideshow appears normally on the first part, where you have to click in order to then go to the detail view with the thumbnails on top.

Disable row highlighting in details view in file explorer

Cannot extract files from archive to existing folder using drag and drop operation.
screenshot here http ://imgur. com/lmERkkw (it doesn't let me attach images or links until "verify my account", but no such option I am offered)
or a simply file drag and drop copy http ://imgur .com/CHgmu5R
In file explorer navigate to a folder containing enough files that there is no space between the last file and the bottom window edge.
In another file explorer window, open a ZIP archive with explorer.
Select all files and try to drag and drop these files over the first window. An operation that you would routinely perform and expect no issues, you might say.
This however will fail because sometime after XP a "brilliant" mind at Microsoft decided that 1) items in details view should be highlighted when the mouse is over and 2) not being satisfied with the damage (1) is doing, the entire row is highlighted
when the mouse is over, so when a drag and drop operation comes to this target, it is not interpreted as a drop to empty space but a drop to a target file.
In XP, if I really wanted to drop an object into a file, I would EXPLICITELY drop it onto the FILENAME. If I wanted to drop into the containing/displayed folder, I would just drop it into an empty space.
But in recent windows, this has changed and there is no space left to drop the drag-and-drop operation.
I am ***baffled*** at me as a small user having to sum all this up. Don't windows developers use windows themselves??!?!?!?!
I read on the net that for windows 7 there was a workaround for this called "folder options X". it seems that it does not work in win10.
If someone cares to collect this feedback and send it to developers, this is just ONE of MANY features slashed from XP file explorer and XP desktop and XP taskbar and XP start menu (everything being offered by explorer.exe). Find a whole list here:
http :// xpwasmyidea.blogspot .com
Left tree folder jumping bug is back. Single-click expanding in left panel folder tree only worked in XP. etc....

thank you Raafje.
It works well!
But I have still an issue with colored content of table cells. Some cells in my report contains HTML-colored content(a kind of intra-cell progress bar). Any hover color (I tried same color row and background-color:transparent) overwrite the color of cell's content and it looks no so nice. Each cell may have different colors so I can not define one standard for hover for all cases.
Is there a way to deactivate this hover completely?
Thank you!

Mix overview and detail records in same report

Hello, in substance I need to mix results from overview table and records from details table in same report.
For creating the scenario:
CREATE TABLE ALPHA
ALPHA_ID     NUMBER,
ALPHA_NR     NUMBER,
ALPHA_TOTCT     NUMBER,
ALPHA_FUND     NUMBER
ALTER TABLE ALPHA ADD (
     CONSTRAINT ALPHA_PK PRIMARY KEY (ALPHA_ID));
ALTER TABLE ALPHA ADD (
     CONSTRAINT ALPHA_NR_UNI UNIQUE (ALPHA_NR));
INSERT INTO ALPHA(ALPHA_ID, ALPHA_NR)
VALUES( 1, 7 );
INSERT INTO ALPHA(ALPHA_ID, ALPHA_NR)
VALUES( 2, 11 );
INSERT INTO ALPHA(ALPHA_ID, ALPHA_NR)
VALUES( 3, 15 );
INSERT INTO ALPHA(ALPHA_ID, ALPHA_NR)
VALUES( 4, 17 );
CREATE TABLE HIST
HIST_ID     NUMBER,
HIST_NR NUMBER,
HIST_ALPHA_NR NUMBER,
HIST_CT          NUMBER,
HIST_VAL     NUMBER,
HIST_DATE     DATE
ALTER TABLE HIST ADD (
     CONSTRAINT HIST_PK PRIMARY KEY (HIST_ID));
ALTER TABLE HIST ADD (
     CONSTRAINT HIST_NR_UNI UNIQUE (HIST_NR));
ALTER TABLE HIST ADD (
     CONSTRAINT HIST_ALPHA_NR_FK FOREIGN KEY (HIST_ALPHA_NR) REFERENCES ALPHA ( ALPHA_NR ) );
TRUNCATE TABLE HIST;
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 1 ,1    ,7 ,1 ,10 , TO_DATE('01.02.2009' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 2 ,6    ,7 ,1 ,10 , TO_DATE('01.05.2009' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 3 ,3    ,7 ,3 ,30 , TO_DATE('01.02.2010' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 4 ,4    ,11 ,1 ,10 , TO_DATE('01.03.2009' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 5 ,5    ,11 ,-2 ,-20 , TO_DATE('01.06.2010' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 6 ,8    ,11 ,1 ,10 , TO_DATE('01.02.2011' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 7 ,2    ,15 ,2 ,20 , TO_DATE('01.03.2009' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 8 ,7    ,15 ,5 ,50 , TO_DATE('01.06.2010' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 9 ,9    ,15 ,-4 ,-40 , TO_DATE('01.02.2011' , 'dd.mm.yyyy' ) );
INSERT INTO HIST( HIST_ID ,HIST_NR ,HIST_ALPHA_NR ,HIST_CT ,HIST_VAL ,HIST_DATE )
VALUES ( 10 ,10    ,17 ,1 ,10 , TO_DATE('01.03.2011' , 'dd.mm.yyyy' ) );For updating the overview table, I used a view
CREATE OR REPLACE VIEW HIST_AGG ( HIST_ALPHA_NR, TOT_CT , TOT_VAL )
AS
SELECT HIST_ALPHA_NR
,SUM ( NVL(HIST_CT, 0 ) ) TOT_CT
,SUM( NVL(HIST_VAL, 0) ) TOT_VAL
FROM HIST
GROUP BY HIST_ALPHA_NR;
DECLARE
CURSOR cur
IS
SELECT
HIST_ALPHA_NR
,TOT_CT
,TOT_VAL
FROM HIST_AGG
BEGIN
FOR rec IN cur
LOOP
     UPDATE ALPHA
     SET ALPHA_TOTCT = rec.TOT_CT
     , ALPHA_FUND = rec.TOT_VAL
     WHERE ALPHA_NR = rec.HIST_ALPHA_NR;
END LOOP;
END;First report should the overview line from table alpha followed by all detail records from
table HIST, and this for each alpha_nr. At the end of the report a total from the overview
table alpha.
"SUMMARY";"ALPHA_NR";"ALPHA_TOTCT";"ALPHA_FUND";
;7;5;50;
;7;1;10;01.02.2009
;7;1;10;01.05.2009
;7;3;30;
;11;0;0;
;11;1;10;01.03.2009
;11;-2;-20;01.06.2010
;11;1;10;01.02.2011
;15;3;30;
;15;2;20;01.03.2009
;15;5;50;01.06.2010
;15;-4;-40;01.02.2011
;17;1;10;
;17;1;10;01.03.2011
"TOTAL_ALPHA_NR";4;9;90;Second report should display the overview per time period (year), but the records from
e.g. year 2009 start counting in year 2010. At the end of each year again a summary for
the actual status.
"YEAR";"ALPHA_NR";"ALPHA_TOTCT";"ALPHA_FUND"
2009;7;0;0
;11;0;0
;15;0;0
;17;0;0
"Total 2009";4;0;0
2010;7;2;20
;11;1;10
;15;2;20
;17;0;0
"Total 2010";4;5;50
2011;7;5;50
;11;-1;-10
;15;7;70
;17;0;0
"Total 2011";4;11;110
2012;7;5;50
;11;0;0
;15;3;30
;17;1;10
"Total 2012";4;9;90

Hi,
This is quite a different problem from what you first posted.
wucis wrote:
This is what I want to get
ALPHA_DATE     ALPHA_NAME             ALPHA_NR     ALPHA_TOTCT     ALPHA_FUND     TRANS_DATE
01.01.2009      seven                      7             5             50
                                  7          1          10          01.02.2009
                                  7          1          10          01.05.2009
                                  7          3          30          01.02.2010
01.03.2009     eleven                  11          0          0
                                  11          1          10          01.03.2009
                                  11          -2          -20          01.06.2010
                                  11          1          10          01.02.2011
03.05.2010      twelve                  12              0               0
02.02.2009     fifteen               15          3          30
                         15          2          20          01.03.2009
                         15          5          50          01.06.2010
                         15          -4          -40          01.02.2011
10.10.2010      seventeen          17          1          10
                         17          1          10          01.03.2011
            TOTAL_ALPHA_NR          5          9          90
Do you really want to include alphr_nr=12? If so, what do you mean when you say
I have an approach but there are "unnecessary" rows ( the line with just alpha_nr = 12 ) and why don't you want alpha_nr=13?
so my join is buggyExactly! The join
...    from hist, alpha b
WHERE b.alpha_nr = hist.hist_alpha_nr (+) ...means "include all rows from alpha, whether of not they have any corresponding rows in hist or not". If you want to exclude alpha_nrs 12 and 13, you probably want to do an inner join there.
You don't need any sub-queries to do that:
SELECT       CASE
           WHEN GROUPING (h.hist_alpha_nr) = 0
           AND   GROUPING (h.hist_date)     = 1
           THEN MAX (a.alpha_date)
       END                    AS alpha_date
,       CASE
           WHEN GROUPING (h.hist_alpha_nr) = 1
           THEN 'TOTAL_ALPHA_NR'
           WHEN GROUPING (h.hist_date)     = 1
           THEN MAX (a.alpha_name)
       END                    AS alpha_name
,       CASE
           WHEN GROUPING (h.hist_alpha_nr) = 0
           THEN h.hist_alpha_nr
           ELSE COUNT (DISTINCT (alpha_nr))
       END                    AS alpha_nr
,       SUM (h.hist_ct)          AS alpha_totct
,       SUM (h.hist_val)           AS alpha_fund
,       h.hist_date               AS trans_date
FROM       hist        h
,       alpha        a
WHERE       h.hist_alpha_nr     = a.alpha_nr
AND       a.active          = 'Y'
GROUP BY ROLLUP ( hist_alpha_nr
                   , hist_date
ORDER BY GROUPING (h.hist_alpha_nr)
,            h.hist_alpha_nr
,       GROUPING (h.hist_date)          DESC
,       h.hist_date
;Output:
                           ALPHA ALPHA ALPHA
ALPHA_DATE ALPHA_NAME        _NR _TOTCT _FUND TRANS_DATE
01.01.2009 seven               7      5    50
                               7      1    10 01.02.2009
                               7      1    10 01.05.2009
                               7      3    30 01.02.2010
01.03.2009 eleven             11      0     0
                              11      1    10 01.03.2009
                              11     -2   -20 01.06.2010
                              11      1    10 01.02.2011
02.02.2009 fifteen            15      3    30
                              15      2    20 01.03.2009
                              15      5    50 01.06.2010
                              15     -4   -40 01.02.2011
10.10.2010 seventeen          17      1    10
                              17      1    10 01.03.2011
           TOTAL_ALPHA_NR      4      9    90If this is not what you want (e.g., if you want alpha_nr=12 in the results) then point out where these results are wrong, post the correct results, and explain how you get the correct results in those places.

IR detail view not showing

I have an interactive report that I would like to show in detail view.
I have set enable detail view to Yes
I have set before rows to <table>
I have set for each row to <tr><td>#CREATED_ON#</td></tr>
I have set after rows to </table>
When I click on the detail view icon on the IR action bar nothing shows.
I've also tried just some plain text in for each row <tr><td>Made it here</td></tr> still nothing
Any suggestions?
I'm on apex version 4.2.1.00.08
Using Theme 26 (Productivity)
DB 11gR1
Thanks
Wayne
Edit: Found the problem - when using the wizard to create the report/form for some reason the detail view wouldn't work. Created report by hand detail view works just fine
Edited by: wcoleku on Apr 15, 2013 11:09 AM

Hi,
Check the assign template code and ensure the CSS refrence starts with a leading slash.
e.g. "/mycss.css"
This might be the cause of this issue. If still no luck please provide the url to the web app so we can help further.
Kind regards,
-Sidney

Not able to display bar chart in details view

Hi every one,
I created Tiles and when click on Tile it is going to SplitContainer. in SplitContainer container i have two HTML views. I am trying to dispaly bar chat in Detail view. but its not displaying. Can you please help me?
Here is my code.
Here is my details view.
<template data-controller-name="view.LrDetail">
<div id="page" data-sap-ui-type="sap.m.Page" data-title="Leave Request" data-show-nav-button="true" data-nav-button-press="back">
<div data-sap-ui-aggregation="content">
<div data-sap-ui-type="sap.m.ObjectHeader"
data-title-active="true"
data-title-press="showRequestor"
data-title="{lr>requestor}"
data-number="{lr>days}"
data-number-unit="days">
<div data-sap-ui-aggregation="attributes">
<div data-sap-ui-type="sap.m.ObjectAttribute" data-text="{path:'lr>type', formatter:'util.Formatter.lrType'}">
</div>
</div>
<div data-sap-ui-aggregation="firstStatus">
<div data-sap-ui-type="sap.m.ObjectStatus" data-text="{path:'lr>agoDays', formatter:'util.Formatter.agoDays'}">
</div>
</div>
</div>
<div id="reports" data-sap-ui-type="sap.viz.ui5.Bar">
</div>
</div>
</div>
</template>
and here is my details controller
onBeforeRendering: function()
var oModel = new sap.ui.model.json.JSONModel({
businessData : [
{Country :"Canada",revenue:410.87,profit:-141.25, population:34789000},
{Country :"China",revenue:338.29,profit:133.82, population:1339724852},
{Country :"France",revenue:487.66,profit:348.76, population:65350000},
{Country :"Germany",revenue:470.23,profit:217.29, population:81799600},
{Country :"India",revenue:170.93,profit:117.00, population:1210193422},
{Country :"United States",revenue:905.08,profit:609.16, population:313490000}
sap.ui.getCore().setModel(oModel, "MyJSONModel");
var dataset = new sap.viz.ui5.data.FlattenedDataset({
            dimensions : [ {
              axis : 1,
              name : 'Country',
              value : "{Country}"
            measures : [ {
              name : 'population',
              value : '{population}'
            }] ,data : {
              path : "/businessData"
var chart = this.getView().byId("reports");
chart.setDataset(dataset);
chart.setModel(oModel);
here is my output screenshot.
Can you please help me where i am doing wrong.

Hi Sakthivel Elango,
My code is working in Normal view and displaying Chart. the same code put into detail view chat is not displaying. Inside HTML code i am posting please check the code.
<div id="LrDetail--reports" data-sap-ui="LrDetail--reports" class="sapVizChart" style="width: 640px; height: 480px;">
   <div id="UIComp_0" style="position: relative; overflow: visible; font-size: 10px; box-sizing: border-box; left: 0px; top: 0px; width: 640px; height: 480px; display: none;">
      <div id="UIComp_1" class="UIComp_1-2ebc44e6-2f93-46d1-964e-e823b0afe432 v-viz v-bar" style="position: relative; overflow: hidden; font-size: 10px; box-sizing: border-box; display: block; width: 640px; height: 480px; -webkit-user-select: none; left: 0px; top: 0px;">
         <canvas style="width: 0px; height: 0px;"></canvas>
         <svg class="v-m-root" width="640" height="480" style="left: 0px; top: 0px; direction: ltr; position: absolute; box-sizing: border-box;">
            <defs></defs>
            <g class="v-m-title"></g>
            <g class="v-m-legends">
               <g class="v-m-legend"></g>
            </g>
            <g class="v-m-main">
               <g class="v-m-background"></g>
               <g class="v-m-xAxis"></g>
               <g class="v-m-yAxis"></g>
               <g class="v-m-plot"></g>
            </g>
         </svg>
      </div>
   </div>
</div>
in this svg tags there is no bars.

Bug in details view: index columns not shown correctly, stops at 4th column

I do have two indices on a table which are shown in the details view. In the column 'columns' only the first 4 columns are shown that belong to the index.
If I choose an index in another detail view, all columns are shown correctly.
Where to report this bug?

I just realized this was an issue today.
Once one knows that only 4 columns are shown in the summary and that you have to click on the index name for any index that shows 4 columns to see if there are more, well that extra click is pretty simple and not a big deal.
The problem is BEFORE one knows of this. For weeks, when reviewing some indexes created by others, I was under the wrong impression about some indexes because I thought they only had the 4 columns shown. I didn't know at that time that I had to select the index and look at the detail section.
It wasn't until I just happened to click on one of them and saw more columns listed that I realized there was a bug. And yes, as far as I'm concerned, this is a bug not a feature.
At an absolute minimum, there should be something done so users know they have to look at the details. Perhaps the heading could be changed to "Columns (up to 4)" or the ellipsis or (more) could be added as someone else suggested. Even just an additional comma would help. I can't imagine why it was written to stop at 4 anyway - why does that make any sense?
This is the first time I've come to this forum so I'm not sure how to request an enhancement. I'll read a few other threads and see if I can tell.

Update a detail-detail View

I've created a JTree with the root nodes being the Master(Oracle Table Owners). The second level nodes are detail view(Oracle Tables owned by a Owner). Here's the problem: In a separate panel I've created a table that will ideally display the columns for a selected table name. Upon initial load of the application, the columns are populated. Once I try to drill down to a table, the table columns VO is blank and never to return. I tested the AM and all the relationships are setup correctly.
Do i need to explicitly tell the VO to refresh, seems odd?
Where should I start to discover where my problem is occurring?
Thanks for your help.

bump
noone, anyone? pleaseeee

Possible bug when creating multiple detail view objects

using jdev 11.1.1.0.0 to build jsf/adf applications. I wanted to report what seems like a bug in 11g. I have a parent table which has two child tables. After creating the appropriate entities, associations, views, and view links, the app module looks like this:
MasterView
--DetailView1
--DetailView2
The two detail view objects are on the same level, they are both direct children of the Master view.
Here's what's happening:
1) I create the master entity/view objects (MasterView)
2) I create one of the detail entity/view objects (DetailView1).
3) I create the association and view link to establish relationship between MasterView and DetailView1. Everything works fine.
4) I create the entity/view objects for second detail view (DetailView2)
5) When I attempt to create a second view link (based off an association) to establish the relationship between MasterView and DetailView2, the query clauses of the Create View Link wizard (screens 4 and 5) do not get created properly. I finish the wizard and save. Not only does this view link not get created properly, but in the process the query clauses that were defined in the first view link between MasterView and DetailView1 are wiped out. This will break any coordination between master and detail views in both the app module tester and runtime. Has anyone seen this problem?

fyi, it looks like this issue has been resolved with jdev 11.1.1.0.2 (Update 2)

Java Plugin Viewer with Crystal Reports 2008

Hello,
I am trying to use the Java Plugin Viewer with Crystal Reports, but I have some problems. The ActiveX Viewer works well, but as I want to use the reports in other browsers, I need the Java viewer.
I have a Visual Basic 6 application, and, instead of including SmartViewerActiveX.asp, I have included JavaPluginViewer.asp. I have taken this file from an older version of Crystal, and I am changing the values on it (I have done the same with the ActiveX Viewer, without problems). This is the main code of the file:
<OBJECT
    classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    width="100%"
    height="100%"
    codebase="/crystalreportviewers11/JavaPlugin/Win32/j2re-1_4_2_04-windows-i586-p.exe#Version=1,4,0,0">
    <param name=type value="application/x-java-applet;version=1.4">
    <param name=code value="com.crystaldecisions.ReportViewer.ReportViewer">
    <param name=codebase value="/crystalreportviewers11/JavaViewer/">
    <param name=archive value="ReportViewer.jar">
    <param name=Language value="en_US">
    <param name=ReportName value="RDCrptserver11.asp">
    <param name=CanDrillDown value="true">
    <param name=HasExportButton value="true">
    <param name=HasGroupTree value="true">
    <param name=ShowGroupTree value="true">
    <param name=HasPrintButton value="true">
    <param name=HasRefreshButton value="true">
    <param name=HasTextSearchControls value="true">
    <param name=HasZoomControl value="true">
    <param name=HasSearchExpert value="false">
    <param name=HasSelectExpert value="false">
    <param name=ShowLogo value="false">
</OBJECT>
I know how to change all the values of this object so it works with Crystal2008 except one: the codebase.
I have gone to IIS, and under the virtual folder "crystalreportviewers12" I don't see any JavaPlugin folder, there's only the JavaViewer folder, and there isn't any .exe inside...
So, where can I find the .exe for the codebase?
I have tried searching the web for a tutorial or something, but I haven't seen anything for Crystal 2008.
Can anyone help me?
Thank you very much!

This is so wrong, I don't even know which forum this would belong to ( I think I'll move it to the SAP Crystal Reports, version for Eclipse topic Space...
Let's start with this:
I have taken this file from an older version of Crystal,
Don't mix versions. It will not work. Period
Next re:
I don't see any JavaPlugin folder,
If you want a Java solution, I'd recommend using CR for Eclipse which you can download from here:
SAP BusinessObjects - SAP Crystal Reports, Version For Eclipse Download
I would then recommend having a peek here:
CRJ SDK
Developer Help File is here:
https://help.sap.com/javadocs/cr/xi/jrc/en/overview-summary.html
Finally, I'm not sure what references you are making in your VB 6 app, but there is no SDK in CR 2008 that supports VB 6.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
https://twitter.com/SAPCRNetSup

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

Master detail view with drill down

I am trying to develop a simple app for my Ipad. This app is supposed to have a Master/details look and should behave similar to the native Mail app (2x levels of navigation and the last level updates the details view).
My problem is that I am not familiar to Apple IOS development so tend to get stuck all the time so I prefer to follow a tutorial or start with a sample project. I have searched for hours but I always either get a pure navigation drill down project without the details view or a pure master/details project with only a single level of navigation. I tried to take these projects and modify them but my knowledge sadly is very limited and I did not succeed.
So can anybody direct me to a tutorial or a sample project where a Mail like app is being built with more than 1 level of navigation ?

I have a GridBagLayout panel with a jtable and some jtextfield Well, we don't know exactly what constraints you have set up to its hard to say exactly why its happening.
In general, you should create your JTextField using new JTextField(int) and I think the problem will go away.
An easier solution would also be to use different LayoutManagers to achieve the desired layout.

PRISM Master-Details with navigation between the Master and details view

Hi, I have a Master list with accounts and a Details list containing transactions.
The Master list : has a UserControl (AccountListView) and Viewmodel(AccountListViewModel)
The list is bound to an observable collection of type AccountViewModel and has a SelectedAccount property to get the current selected account. Each AccountViewModel has a collection of type TransactionViewModel.
public AccountListView(IAccountListViewModel viewModel)
//this.DataContext = vm;
InitializeComponent();
ViewModel = viewModel;
public Infrastructure.IViewModel ViewModel
get
return (IAccountListViewModel)DataContext;
set
DataContext = value;
//the viewmodel
public AccountListViewModel(IRegionManager regionManager)
this.regionManager = regionManager;
this.AccountList = GetAccounts(); // gets the list of accounts from another layer
public AccountViewModel SelectedAccount
get { return selectedAccount; }
set
selectedAccount = value;
OnPropertyChanged("SelectedAccount");
And the Details view has a user control(TransactionListView) and a viewmodel(AccountView);
public TransactionListView(IAccountViewModel viewModel)
InitializeComponent();
ViewModel = viewModel;
//this.DataContext = vm.SelectedAccount;
public Infrastructure.IViewModel ViewModel
get
return (IAccountViewModel)DataContext;
set
DataContext = value;
//the viewmodel
public AccountViewModel(Business.Account a)
AccountId = a.AccountId;
accountName = a.AccountName;
I created a hyperlink command so that whenever I click on the name of an account from the master list it will navigate to the detail list and set the as the DataContext the account I clicked on. Before I had both Master and Detail lists displayed at the
same time and set the DataContext of the Detail List as the SelectedAccount property(which is bound to the SelectedItem of the Master List) of the Master List. I am not sure how to pass the SelectedAccount when I navigate to the Detail List and set it as the
DataContext of the Detail List.

>>I'm using the reguestnavigate method, but from what I read you can't pass objects as parameters ?
As I mentioned there is a NavigationParameters class that you can create an instance of and pass as a parameter to the RequestNavigate method in Prism 5:
private void NavigateTransaction(AccountViewModel obj)
var parameters = new NavigationParameters();
parameters.Add("accountViewModel", obj);
regionManager.RequestNavigate(RegionNames.ContentRegion, new Uri(transactionview, UriKind.Relative), parameters);
The TransactionView should then implement the Microsoft.Practices.Prism.Regions.INavigationAware interface and retrieve the parameter in the OnNavigatedTo method:
public partial class TransactionView : UserControl, INavigationAware
public TransactionView()
InitializeComponent();
void INavigationAware.OnNavigatedTo(NavigationContext navigationContext)
AccountViewModel myParameter = navigationContext.Parameters["accountViewModel"] as AccountViewModel;
this.DataContext = myParameter;
public bool IsNavigationTarget(NavigationContext navigationContext)
return true;
public void OnNavigatedFrom(NavigationContext navigationContext)
In Prism 4 there is no NavigationParameters class so you either need to upgrade to Prism 5 if you haven't already done so or you could store the parameters to be passed yourself somewhere else. Please refer to the following links for more information and
examples of how you could do this:
http://stackoverflow.com/questions/9320638/how-to-pass-an-object-when-navigating-to-a-new-view-in-prism
http://visualstudiomagazine.com/articles/2012/08/20/view-communication-in-wpf-and-prism.aspx
Please also remember to mark helpful posts as answer to close the thread and then start a new thread if you have a new question. Please don't ask several questions in the same thread.

Not able to view the web report..

hi,
I have sap bw 3.0b and WAD installed. I am able to create a report in WAD and when i try to generate the web report, IE opens with an url starting as http://xxx.yyy.....
If my understanding is correct to view these WAD reports in my workstation I need to have Apache running so that the http://.... URL is resolved as appropriate.
If yes, then I need to know how to configure Apache , the port number etc.
If my understanding is not correct please let me know how i can view my report in the browser at my workstation.
thanks a lot. Awaiting ur help.

In start up menu click on Run.
write "drivers". it'll open the "C:\WINDOWS\system32\drivers" folder in new window.
Go to etc folder in that you'll find "hosts" file open it in notepad.
There maintain an entry for the server ip & hostname (system name) seperated by tab.
Example on "how to maintain the entry" is also provided in hosts file.

Budget detail view - Start BW report

Similar Messages

Maybe you are looking for