Budget exceeded error while deleting CAPEX Purchase order
Hello All,
We've created purchase order with WBS element for some materials & account assgn P. This however needs to now be deleted as there has been mistake in th PO.
But while trying to delete the PO the system gives an error message " WBS element XXXX.XXX.. budget exceeded"
I've tried deleting the PR first and then the PO which works fine, BUT we are not able to create another PO as the error of Budget exceeded is seen here as well.
Please advice on how to delete the PO.
Regards,
ManojR
Hi,
Please read note 178837 which gives information on how to check the real assigned value.
I would like you to run report ZKAOIDE0 from Note 100409 to remove
the data which is not linked to a valid purchase order or requisition.
After running the report then run transaction CJEN to reconstruct the
project. Then run report RKANBU01 after completing the reconstruction.
The problem is probably that a purchase order has the deletion indicator set but it still appears in table COOI.
I hope this helps!.
Best Regards,
Arminda Jack
Similar Messages
-
Budget Exceed Error during creating of Purchase order in reference to PR
Hi,
I am getting the subject error (Budget Exceed Error) every time when I want to create a purchase order related to purchase requisition of my project.
Issue is that after release the project when the purchase requisition has created for non stock item under activity I found in transaction CJ31 the assign value has already updated.
Let say my budget is 400 US$, and the purchase requisition has created for 380 US$. Now when I check with CJ31I found the assigned value is 380. Now If I create a purchase order it throws an error that budget exceed.
The tolerance limits are following:
SA ZSA01 Budget Profile Overall AVAC ++ 1 90,00
SA ZSA01 Budget Profile Overall AVAC ++ 3 100,00
SA ZSA01 Budget Profile Overall AVAC 01 1 90,00
SA ZSA01 Budget Profile Overall AVAC 01 3 100,00
Please advice what will be the proposed solution for the above issue.
Thanks in advance.
With Regards,Your budget is 400$ and PR value is 380$ but you have not mentiond what is the tax value ?
when u r creating PO at that time system will check the budget against PO value considering taxes also.
eg. 380$+tax value.
after considering taxes your total PO value imay be getting updated more that 400$.
Explre you error by clicking on error information you get the exact diffrence in budget and PO value.
Hope this will sove your problem, reply after doing this. -
Budget exceed error while unreleasing the service entry.
Hi experts,
My problem is the systm generating budget exceed error while unreleasing the entry sheet in current fiscal year.
Entry sheet is released in privious fiscal year. User want to reverse this in current year. All budget(actual/commitment) are carryforwarded to current year. While unreleasing the entry sheet, system throwing the budget exceed error. There is suficent budget in current fiscal year.
Request you to pl suggest what might be the cause of problem.
Regards
shrikantHi
Thanks for reply
For WBS element A-101.01
For year 2009
current budget is 100000
Distrubutable budget is 100000
Assigned budget is 100000
For year 2010
current budget is 300000
Distrubutable budget is 300000
Assigned budget is 200000
Service PO created in 2009 year for amount 20000/-. Service Entry sheet created and released in 2009 .Vendor invoice has not be generated. Error budget exceed is raised for year 2009 while reversing the service entry sheet in current posting date.(privious posting period /year closed). -
Error while creating a Purchase Order
Hi Friends,
I am new to SAP MM. I am getting a problem while creating a purchase order. I created Purchase Info Record, Source List, but while creating Purchase Order, price is not picking from the purchase order. I am getting an error i.e. Net Value must be greater than 0. I checked all the settings, but getting same error.
Could you please solve thisHi,
Give some price at the item level for the item in the PO.
And check the Pricing procedure in PO
Hope it helps you.
Thanks. -
Interesting scenario- user facing error while deleting a sales order
Hello All,
I have one interesting scenario and want feedback from your side as soon as possible
Scenario-
One of my clients is facing a problem while deleting a sales order.
the sales order he is trying to delete is the old order created in 2007.
when i see the document flow the user has created the export order, then delivered it, invoiced and sent it to accounting, accounting document is also cleared. then he cancelled the invoice, reverse PGI and deleted the delivery. the status of the sales order system is showing is being processed. but please note in this case after reversing PGI and deleting a delivery the delivery document disappears from the document flow.
document flow looks like this
Order - 200004715 Being processed
invoice- 700005310 completed
accounting 700005311 cleared
Cancel Invoice 700005315 completed
Accounting 700005316 cleared
Now, in 2008 user is trying to delete the sales order but he is unable to do the same. system is giving him message "unable to delete sales order because of subsequent document 70005310 (which is invoice number)"
Can somebody please throw some light on this problem.
Thanks in advance.Hi,
As fas as I know, this is standard system behaviour. The reason - you have done PGI (which has created a material document as well as accounting doc) and invoiced & reversed (which again has created accounting documents & rversal documents). All these documents are referencing the sales order.
If you delete sales order, sales order number gets deleted from VBAK /VBAP tables.
Hence, in relational data base scenario (meanin SAP in this context), deletion of sales order after creation of subsequent documents is not feasible.
Hope it clarifies the issue.
Regards
Murali -
Budget Exceed error while settlement in PS T-Code CJ88
Hi Guru's,
I have created structure upto 6 level and i have done planning and budgeting at 6th level only, and actual cost is also posted at 6th level.
When i am setteling that amount at 5th level WBS using T-Code CJ88 then it is giving Budget exceed error of that particular amount as budget is also available at higher level WBS as accumalation of budget at 6th level is going to higher level WBS as i am following buttom-up approach.
Please suggest.
Regards,
AmbujHi Rajesh,
When you distribute budget to lower level WBS, the budget is only available at the lower level (availability is checked as: Budget - Distributed Budget - Assigned) regardless of whether it is shown at the superior level or not.
AVAC status is activated automatically on WBS where budget is distirbuted and released (provide you have maintained Activation Type 1 in Budget Profile OPS9). Please check if AVAC status is active on your 5th level WBS. If it is active then the system will throw the error as SAP standard behavior. You can remove this status from 5th level WBS via CJBW.
You may need to look at your budget configuration accordingly.
Regards,
Ammar -
Budget Exceeded error while changing in Account Assignment
Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JKI think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth -
Error while uploading Complex Purchase Order through POXPOPDOI open interfa
Dear Gurus,
I am trying to upload Complex Purchase Orders in Oracle EBS R 12.1.2
The PO_INTERFACE_ERRORS table is populated with the following message:
STYLE_ID Error: Style (STYLE_ID = 103) with progress payments is not supported.
We have checked each and every setup. It is OK.
We tried to enter the complex POs from Front end screen, there is no issue. But I dont know why this error comes everytime we try to upload the POs throught the interface
We ran the Diagnostic Test. It is also OK.
Cannot figure out what is the issue. Please help.
RegardsHi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan -
Error, While updating a purchase order
Hi All,
I am getting following error massage while updating a existing PO:
" Cannot Insert the value null into column docentry, Table db name.dbo. POR4; column does not allow nulls. Insert Fail."
We have upto 886 items in the PO and the summary type is " No summary". Even when i treid to change the summary type to "By items", the system is till throwing the same error message. Please let me knwo the cause of this error and how to rectify this??
Thanks in advance,
JosephDear Joseph,
Please try the followings in a testing database and check the results:
1. if you give full authorisation to this specific user, will the error persist when adding the rows?
2. if adding new rows at the end of the purchase order will it be successful?
3. if you duplicate the sales order then add the new rows, will the error occur?
4. will the error persist if you upgrade the client to the latest patch?
5. please check the note 1139134 and 1249795.
Regards,
Varun
SAP Business One Forum Team -
Error while save framework purchase order.
dear all
i am working SAP R/3 4.7 ides while creating framework po, i input all the data field correctly , but when i am going to save the purchase order, it given the error Massages " Indicator for invoice receipt used not allowed
Message no. MEPO026"
then i tell me how i save the po. i request to all the expertsDear,
What account assignment you are using?
Use account assignment category as K and item category as B Also do not enter material ID.
Now try.
Regards
Utsav -
WebDynpro Error while creating a Purchase Order in SRM 7.0
Hello Friends,
I need help.
We are on SRM 7.0 with support pack 8.0 and we are getting the below error wile clicking on Shopping cart or Purchase Order link in Portal.
Any idea on how to resolve this error.
Thanks
Jyothi.
http://sapsrm.erpcx.com:8000/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
ASSERTION_FAILED
The ASSERT condition was violated.
Method: ADD_EVENT_TO_QUEUE of program CL_FPM========================CP
Method: IF_FPM~RAISE_EVENT of program CL_FPM========================CP
Method: SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_COMPONENTCONTROLLER~SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_V_PRSEL~RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CPHere is what I see:
Error analysis |
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_FPM========================CP" or "CL_FPM========================CM004"
"ADD_EVENT_TO_QUEUE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
| -
Error while creation of PUrchase order by using BAPI.
Hi All,
We are creating a purchase order thru BAPI ("BAPI_POEC_CREATE") and we are passing the following parameters ( I_PO_HEADER , I_PO_ITEMS , I_PO_ACCASS , I_PO_PARTNER and I_PO_ORGDATA) to the bapi and after processing we are getting the following error and Abend messages.
Messages:
1) Enter at least one item or one limit ( we have added line items in I_PO_ITEMS structure).
2) Incorrect interface data for set 78 in method C.
3) Interface data contains errors.
Can anyone help me in fixing these errors inorder to proceed further.
Regards
DharmarajuHi there,
Did you manage to sort this problem ?
If not let me know
I am using the same and know how to overcome
Thanks
Turlock
T -
Budget Exceed error while returning material
Hi,
We have this scenario:
budget is allocated at top WBSE.
actuals are booked on 2nd level WBSE.
Tolerance limits: ++ 90% warning
++ 100% error
Budget profile:
Activation Type: 1
Overall: yes
Releases: yes
Now,
We have overall & released budget = 4,320,000.
and assigned value = 3,895,085.
Error is coming when we are returning a material from activity:
"network activity budget exceeded" message no. BP601
Diagnosis:
"Payment Budget for WBSE TAT-PR09-06.01 on network activity has been exceeded by 215049.39."
Kindly help.
Thanks,
Harsh.Hi,
Top WBS TAT-PR09-06.1 has original budget and released the same amount i.e. 4320000
Its System status = PREL BUDG ISBD AVAC
Then there are three 2nd level WBSE each having one network each:
TAT-PR09-06.1.01
System Status = REL AUC AVAC
Network Sys. Status = ACAS MACM PRC REL
TAT-PR09-06.1.02
System Status = REL AUC AVAC
Network Sys. Status = ACAS CSER MACM PRC REL
TAT-PR09-06.1.03
System Status = REL AUC AVAC NTUP
Network Sys. Status = ACAS MACM PRC REL
Reservations are there for all Materials in all network activities with reservation relevance indicator set to immediately.
Error started coming to end user when he tried to send material back to general stock. This material in in network activity under TAT-PR09-06.1.03 WBSE.
After that our Sr. consultant (he moved to another project right now) made that activity to TECO and asked the end user to create another activity and work on it.
This is all i know.
Thanks & Regards,
Harsh. -
Item 001 WBS budget exceeded error while posting cat7
Dear Experts
We have implemented the following modules
PS , CO , HR
The project system has number of projects ,
the time booking is done using cats , the actual labour cost is entered in the cats sheet it self in the price column.
for cost posting after the data is posted to HR system , we are using cat7 to post the data to controlling and PS module.
Mostly all the data is transported , but for some WBS i am getting the following error
Item 001 WBS element <wbs element name> budget exceeded and the system is not allowing to post data to controlling for this wbs .
What is the relavance of this error in context of HR ?
This error is related to which module , PS , HR or CO?
How do i reslove this issue.
Regards
sameerHi,
Check the budget Limit and allocation of WBS elemet.
Tcode - CJ30 ,CJ31.
Check the budget avaialability control as well.I think the message is coming from availability control.
check transactoin CN41,CJBN.
check this link
http://www.sap-img.com/ps001.htm
Manoj. -
Errors while making a purchase order in Adventure Builder 1.0.4
Hi,
I instaled J2EE 1.4 SDK (linux) : j2eesdk-1_4_03-linux.bin thar includes Sun
Java System Application Server PE 8.2 and Java Adventure Builder 1.0.4.
After the "build" and "deploy" of the Adventure, following the steps
presented in Install.html, i did one adventure purchase via browser. To
the client (browser) all goes ok, it gets the order ID, it is able to see
the adventure details and the order has the correct status (SUBMITTED TO
SUPPLIER and, afterwards, COMPLETED). But when i check the server logs
(SUNWappserver/domains/domain1/logs/server.log) i get the following errors:
[#|2006-04-11T16:48:08.051+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=33;|EJB5071:
Some remote or transactional roll back exception occurred
com.sun.jdo.api.persistence.support.JDODataStoreException: JDO76406:
Concurrent access exception: object to update has been updated or deleted by
another transaction.
FailedObjectArray:
[com.sun.j2ee.blueprints.processmanager.manager.ejb.ManagerBean_1935673060_JDOState@15d65d]
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.throwJDOConcurrentAccessException(SQLStoreManager.java:626)
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.executeUpdate(SQLStoreManager.java:185)
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.execute(SQLStoreManager.java:106)
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStateManager.updatePersistent(SQLStateManager.java:893)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushToDataStore(PersistenceManagerImpl.java:1477)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushTxCache(PersistenceManagerImpl.java:1404)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:1338)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.notifyBeforeCompletion(TransactionImpl.java:1130)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.commitBefore(TransactionImpl.java:759)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.beforeCompletion(TransactionImpl.java:650)
at
com.sun.ejb.containers.ContainerSynchronization.beforeCompletion(ContainerSynchronization.java:137)
at
com.sun.jts.jta.SynchronizationImpl.before_completion(SynchronizationImpl.java:56)
at
com.sun.jts.CosTransactions.RegisteredSyncs.distributeBefore(RegisteredSyncs.java:120)
at
com.sun.jts.CosTransactions.TopCoordinator.beforeCompletion(TopCoordinator.java:2491)
at
com.sun.jts.CosTransactions.CoordinatorTerm.commit(CoordinatorTerm.java:240)
at
com.sun.jts.CosTransactions.TerminatorImpl.commit(TerminatorImpl.java:211)
at com.sun.jts.CosTransactions.CurrentImpl.commit(CurrentImpl.java:585)
at
com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:273)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
at
com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
at
com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
at $Proxy92.afterDelivery(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
|#]
[#|2006-04-11T16:48:08.067+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|MDB00037:
[OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
[javax.ejb.EJBException: Transaction aborted; nested exception is:
javax.transaction.RollbackException]|#]
[#|2006-04-11T16:48:08.067+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|javax.ejb.EJBException
javax.ejb.EJBException: Transaction aborted; nested exception is:
javax.transaction.RollbackException
javax.transaction.RollbackException
at
com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:275)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
at
com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
at
com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
at $Proxy92.afterDelivery(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
javax.ejb.EJBException: Transaction aborted; nested exception is:
javax.transaction.RollbackException
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2737)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
at
com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
at
com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
at $Proxy92.afterDelivery(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
|#]
[#|2006-04-11T16:48:08.091+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=33;|EJB5071:
Some remote or transactional roll back exception occurred
com.sun.jdo.api.persistence.support.JDODataStoreException: JDO76406:
Concurrent access exception: object to update has been updated or deleted by
another transaction.
FailedObjectArray:
[com.sun.j2ee.blueprints.processmanager.manager.ejb.ManagerBean_1935673060_JDOState@19a7420]
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.throwJDOConcurrentAccessException(SQLStoreManager.java:626)
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.executeUpdate(SQLStoreManager.java:185)
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStoreManager.execute(SQLStoreManager.java:106)
at
com.sun.jdo.spi.persistence.support.sqlstore.SQLStateManager.updatePersistent(SQLStateManager.java:893)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushToDataStore(PersistenceManagerImpl.java:1477)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.flushTxCache(PersistenceManagerImpl.java:1404)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.java:1338)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.notifyBeforeCompletion(TransactionImpl.java:1130)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.commitBefore(TransactionImpl.java:759)
at
com.sun.jdo.spi.persistence.support.sqlstore.impl.TransactionImpl.beforeCompletion(TransactionImpl.java:650)
at
com.sun.ejb.containers.ContainerSynchronization.beforeCompletion(ContainerSynchronization.java:137)
at
com.sun.jts.jta.SynchronizationImpl.before_completion(SynchronizationImpl.java:56)
at
com.sun.jts.CosTransactions.RegisteredSyncs.distributeBefore(RegisteredSyncs.java:120)
at
com.sun.jts.CosTransactions.TopCoordinator.beforeCompletion(TopCoordinator.java:2491)
at
com.sun.jts.CosTransactions.CoordinatorTerm.commit(CoordinatorTerm.java:240)
at
com.sun.jts.CosTransactions.TerminatorImpl.commit(TerminatorImpl.java:211)
at com.sun.jts.CosTransactions.CurrentImpl.commit(CurrentImpl.java:585)
at
com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:273)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
at
com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
at
com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
at $Proxy92.afterDelivery(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
|#]
[#|2006-04-11T16:48:08.096+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|MDB00037:
[OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
[javax.ejb.EJBException: Transaction aborted; nested exception is:
javax.transaction.RollbackException]|#]
[#|2006-04-11T16:48:08.096+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|javax.ejb.EJBException
javax.ejb.EJBException: Transaction aborted; nested exception is:
javax.transaction.RollbackException
javax.transaction.RollbackException
at
com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:275)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
at
com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
at
com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
at $Proxy92.afterDelivery(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
javax.ejb.EJBException: Transaction aborted; nested exception is:
javax.transaction.RollbackException
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2737)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2521)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDelivery(MessageBeanContainer.java:1042)
at
com.sun.ejb.containers.MessageBeanListenerImpl.afterMessageDelivery(MessageBeanListenerImpl.java:46)
at
com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:105)
at $Proxy92.afterDelivery(Unknown Source)
at com.sun.messaging.jms.ra.OnMessageRunner.run(OnMessageRunner.java:242)
at com.sun.enterprise.connectors.work.OneWork.doWork(OneWork.java:45)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
|#]
[#|2006-04-11T16:48:12.449+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|Initializaing
OtMessageHandler|#]
[#|2006-04-11T16:48:12.452+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|
Initializaing OtMessageHandler|#]
[#|2006-04-11T16:48:12.452+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|
OtMessageHandler:[ns0:getOrderDetails: null]|#]
[#|2006-04-11T16:48:12.580+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.stream.out|_ThreadID=23;|
OtMessageHandler: handleResponse|#]
[#|2006-04-11T16:50:08.045+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.transaction|_ThreadID=33;|JTS5031:
Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
Maybe] on Resource [commit] operation.|#]
[#|2006-04-11T16:50:08.046+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|MDB00037:
[OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
[javax.ejb.EJBException: Unable to complete container-managed transaction.;
nested exception is: javax.transaction.SystemException:
org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
0x0 minor code: 0 completed: No]|#]
[#|2006-04-11T16:50:08.046+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=33;|javax.ejb.EJBException
javax.ejb.EJBException: Unable to complete container-managed transaction.;
nested exception is: javax.transaction.SystemException:
org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
0x0 minor code: 0 completed: No
javax.transaction.SystemException: org.omg.CORBA.INTERNAL: JTS5031:
Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
Maybe] on Resource [commit] operation. vmcid: 0x0 minor code: 0 completed:
No
at
com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:285)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
at
com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
at
com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
javax.ejb.EJBException: Unable to complete container-managed transaction.;
nested exception is: javax.transaction.SystemException:
org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
0x0 minor code: 0 completed: No
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2742)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
at
com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
at
com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
|#]
[#|2006-04-11T16:50:13.059+0100|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.transaction|_ThreadID=34;|JTS5031:
Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
Maybe] on Resource [commit] operation.|#]
[#|2006-04-11T16:50:13.061+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=34;|MDB00037:
[OPC:WorkFlowManagerBean]: Message-driven bean invocation exception:
[javax.ejb.EJBException: Unable to complete container-managed transaction.;
nested exception is: javax.transaction.SystemException:
org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
0x0 minor code: 0 completed: No]|#]
[#|2006-04-11T16:50:13.061+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb.mdb|_ThreadID=34;|javax.ejb.EJBException
javax.ejb.EJBException: Unable to complete container-managed transaction.;
nested exception is: javax.transaction.SystemException:
org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
0x0 minor code: 0 completed: No
javax.transaction.SystemException: org.omg.CORBA.INTERNAL: JTS5031:
Exception [org.omg.CORBA.INTERNAL: vmcid: 0x0 minor code: 0 completed:
Maybe] on Resource [commit] operation. vmcid: 0x0 minor code: 0 completed:
No
at
com.sun.jts.jta.TransactionManagerImpl.commit(TransactionManagerImpl.java:285)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.commit(J2EETransactionManagerImpl.java:947)
at
com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:362)
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2732)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
at
com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
at
com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
javax.ejb.EJBException: Unable to complete container-managed transaction.;
nested exception is: javax.transaction.SystemException:
org.omg.CORBA.INTERNAL: JTS5031: Exception [org.omg.CORBA.INTERNAL: vmcid:
0x0 minor code: 0 completed: Maybe] on Resource [commit] operation. vmcid:
0x0 minor code: 0 completed: No
at
com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:2742)
at
com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:2535)
at
com.sun.ejb.containers.MessageBeanContainer.afterMessageDeliveryInternal(MessageBeanContainer.java:1071)
at
com.sun.ejb.containers.MessageBeanContainer.callEJBTimeout(MessageBeanContainer.java:431)
at
com.sun.ejb.containers.EJBTimerService.deliverTimeout(EJBTimerService.java:1349)
at
com.sun.ejb.containers.EJBTimerService.access$100(EJBTimerService.java:66)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.run(EJBTimerService.java:1897)
at
com.sun.ejb.containers.EJBTimerService$TaskExpiredWork.service(EJBTimerService.java:1893)
at com.sun.ejb.containers.util.WorkAdapter.doWork(WorkAdapter.java:44)
at
com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(Unknown
Source)
|#]
[#|2006-04-11T16:50:13.062+0100|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=34;|EJB5119:Expunging
timer ['4@@1144682418760@@server@@domain1' 'TimedObject =
WorkFlowManagerBean' 'Application = OPC' 'BEING_DELIVERED' 'PERIODIC'
'Container ID = 75023570086854669' 'Tue Apr 11 16:49:08 WEST 2006' '60000' ]
after [2] failed deliveries|#]
So, when i make hundreds of requests i have an obvious problem - a gigantic
log! I did a little benchmark using 10 clients making burst requests and
after a minute or so the Application Server simply stops replying to
requests due to the gigantic number of errors.
Do you have any suggestion of what the problem may be? I already tried the
Windows version and the same thing happens.
thank you in advance,
Jo�o BentoCould you please run your application again, enabling the logging of the SQL statements. To enable, add the following to domain.xml:
<log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000" log-rotation-timelimit-in-minutes="0" log-to-console="false" retain-error-statistics-for-hours="5" use-system-logging="false">
<module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" group-management-service="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" management-event="INFO" mdb-container="INFO" naming="INFO" node-agent="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" self-management="INFO" server="INFO" synchronization="INFO" util="INFO" verifier="INFO" web-container="INFO">
<property name="javax.enterprise.resource.jdo.sqlstore.sql" value="FINEST"/>
</module-log-levels>
</log-service>
Maybe you are looking for
-
Understanding multiple conditions in connect by prior clause Oracle
Hi , Can some one please explain me how to comprehend/understand multiple conditions in connect by prior conditions with some example data. I am creating a table like this CREATE TABLE FAMiLY_TREE GRAND_FATHERID number, FATHER_ID number, SON_ID numb
-
HT4759 How do I edit my iCloud account.
HOw do I edit my iCloud account.
-
New CSS Rollovers not align same as Image Rollovers - Dreamweaver CC
I have put together a test page replacing Javascript Image Rollovers for CSS Image Rollovers and the alignment of items in the 3 columns (DIVS) is not the same as when old style rollovers. I cannot seem to find the error in my CSS and would like anot
-
Writing a formula to populate a field
Post Author: robertr CA Forum: General Hi - I have a report that includes a "STATUS" field. I would like to know if there is a way to add an additional value to the STATUS field that is NOT generated by the report? For example, the "STATUS field o
-
Is there any latest sap notes for 4.7e to improve the performance of standard transactions vf01 and va01. please suggest.I checked for some but not found.