Budget Line Item for Internal Order was disappeared
Dear GURU,
I have the problem when posting budget via Tcode KO22 KO24 and KO26.
When posting budget in the first time, the system was not generate budget document.
But it was created when I post budget again in the second time.
Please tell me what happen for this situation, I am not sure there is SAP note for support this error or not?
Thanks in advance.
Regards,
Nattakarn A.
Hi Eli,
Thanks for your response.
This situation was only occurred in the first time of budget entering for each internal order.
Please kindly to help me to solve this problem.
Thanks in advance.
Regards,
Nattakarn A.
Similar Messages
-
Display report : plan line items for internal orders
When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message :
No plan line items were selected
Message no. KB421
Could anyone advise?
However, the report with KOB1 tcode works well and i have the results as expected for actual line items.this is may be config issue.
can you explain with accounting entries for said line items and offsetting GL for each line?
regards.
ashok -
How can I add a new line item for production order?
HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful! -
Creation of suspension line items for Subscription orders
hi ,
I am currently working on IS-Media project.
I have a requirement that I need to create a suspension for all the line items available for the subscription orders.
I mean I have to create a new line item for all the active line items of a subscription order.
I have seen the FM : ISM_SALES_ORDER_CHANGE.
it is working for only single active line item.
Could you please suggest any of the Function moulesavailable in the SAP : IS-Media?
Thanks in advance.
Vijay.Vijay,
The best FMs that would meet your needs are below. They are listed in the order that will best address what you are trying to accomplish. They are ISM_SALES_ITEM_UNLIMIT_CHANGE, ISM_SALES_ITEM_SUSPEND and ISM_SALES_SCHEDULE_CHANGE.
I hope this helps.
Sibu -
Sales order: Two schedule line items for single order item
Hi,
I have an issue with the schedule lines in the sales order. When we create a sales order with today as the delivery date, it creates two schedule lines for the single order item. But if we give future date as the delivery date, then it creates one schedule line only. The confirmed quantity for the first line item (with today we the delivery date) is zero and second line item confirmed quantity (with delivery date as tomorrow) is actual order quantity. So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do we have stock.
We donu2019t have availability check on and we use custom line item and schedule line categories.
Please give some hints on what might be the issue.
There was on post with this kind of issue, but it was closed without answer.
Thanks,
SriniHi Srinivas,
So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do have stock.
As per my understanding although you have sufficient stock for the material system may be confirming the quantity in future date because of the forward scheduling. As you know system adds different times while evaluating the confirmed delivery date. Check the route which system is using. -
How to get the texts for each line item for Sales order in a smartform
I'm createing a smart form in which i need to display certain texts for each line item of a sales order. How can i get those??
I'm trying with the table STXH and FM read_text... but i'm not clear how and what i'm getting... can anybody pls help me.....Hi There,
But then i will be getting only the value. i want to link that against the particular material of the Purchase Order.
Like for ex:
PO No. Material Code Line Item Basic Excise Tax Inv Value
0000001 5000251 010 100 16 4.64 120.64
0000001 5000252 020 200 32 9.28 241.28
Can u help me on this?
Regards,
Jitesh -
Maximum no of Line items for sales order,delivery document and billing docu
Dear friends,
How many line items we can enter for the following,
1) a Sales order
2) a Delivery document
3) a Billing Document
Thanks in advance.
Regards,
ShrikantHello,
the maximum limit of line items are as follows
order-9999
for delivery and invocie , it is restricted to 999 accouitng line items. since the tranfer to accounting can handle only 999 items , the restriction on delivery and invocie
ex if there are excise postings, for a single line , there might be 5/6 lines genetrated for each line in invocie , therfore as per this the line in invocie get restricted
you have a sap note , which offers suggestions to partially over come this
hope this helps
Thanks
akasha -
Maximum allowed line items for sales order
Hi All,
I am creating sales order thru' BAPI, I heard there is a constrain like only 999 line items allowed for one Sales Order.
Is there any such constrain is there in SAP. (if yes.. Is there any way to resolve the problem...)
I am working in SAP ECC 6.0 version.
Thanks in advance.
RegardsI have not heard of any particular limit imposed by SAP. The field length for line item number (POSNR) is 6 digits, so technically it is limited to 999,999 line items.
The item number assignment is, however, driven by the configuration. Some companies might choose to increase the number by, say, 10 (i.e. the line numbers will be 10, 20, 30, etc.), therefore limiting the total available lines. Note also that line item assignment is different on the billing document, so enough space should be allowed on the order to accomodate all the consequent documents.
An obvious solution is to split the large orders into several smaller ones to avoid running over the limit. -
Reg WBS Element in Sales Order Line Item For Sales Order BOM
Hi ,
Greetings!!!!
I have a requirement, in a Sales Order I am Exploding BOM. After that Projects will be Created.
Once Project will be created i need to Assign WBS element for All Items in Sales Order.
My requirement is When I assign WBS element for Header Material (Parent Item) system will auto assign WBS for Child Items.
for this what Configuration I have to do.
Please do need full.
Thanks,
Regards,
Prasad.Hi Dayananda
Check in transaction VTFL for given item category what copying routine are set. Check those copy routine and see if there is any data is being copied from table VBAP
Similar to above also check transaction VTFA for copying routine (if any)
As a standard SAP even we create an invoice with reference to the delivery document, still there are some data which is being copied from a sales order i.e. all pricing relevant information is copied from your sales order and not from delivery. -
Line item display for Internal Order
Hi All,
What is the transaction code for Internal Order line item display.
Thanks,
MisbahHi,
Its KOB1 to KOB4.
Rgds. -
FM for Actual cost line items for orders.
HI EXPERTS,
I was working on Actual cost line items for orders / Internal orders of an employee.
standard program RKAEP000 is present through TCODE KOB1.
I want some customization of report, so debugged the program and found that its using a FM 'K_LINE_ITEMS_SELECT_AND_LIST' to calculate internal orders.
But the FM has used REUSE_ALV_* and displaying output itself.
the requirement is to customize the output display .
I searched with K_LINE_* and found some other function modules too.
K_LINE_ITEM_CHECK
K_LINE_ITEM_APC_SIGN_GET
K_LINE_ITEM_GET_CONTEXT_MENU
K_LINE_ITEM_GET_TOOLBAR
K_LINE_ITEM_LOGICAL_KEY_GET
K_LINE_ITEM_TECH_SETTINGS_SET
K_LINE_ITEM_VALUE_TYPES_GET
K_LINE_ITEM_VALUE_TYPES_SET
K_LINE_ITEMS_ACT_GRID
K_LINE_ITEMS_SELECT
K_LINE_ITEMS_SELECT_AND_LIST
K_LINE_ITEM_ACT_CALL_WITH_DATA
K_LINE_ITEM_ACT_DATA_GET
K_LINE_ITEM_CM_CALL_WITH_DATA
K_LINE_ITEM_DEV_CALL_WITH_DATA
K_LINE_ITEM_PLN_CALL_WITH_DATA
K_LINE_ITEM_PROCESS_UCOMM_ACT
K_LINE_ITEM_STEERING_GET
Can anybody tell which FM should i use so that result i will get in an internal table?
or suggest any other methods
Thanks in Advance.
LuckyI also had the same requirement and used function module K_LINE_ITEM_ACT_DATA_GET
this function is calling K_LINE_ITEMS_SELECT_AND_LIST function with I_NO_DISPLAY parameter
and returning the result.
Already they are in same function group,
I wrote this for future requirements of people after 4 years of this thread -
BW Datasource for Internal Order and Budget
Hi Gurus,
I would like to ask what datasource I can use for FICO specifically for Internal Orders and Budget. I have looked at all the datasources under the CO node but i can't seem to find a datasource that has the details for the Internal Order and for the Budget.
Thanks in advance
- KitHi,
Check these datasources once.
0CO_OM_OPA_8-- Orders: Budget Line Items
0CO_OM_OPA_2 --Orders: Budget
Refer this link as well.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/de43fcf6e2154bbbbcecbc63cdf287/frameset.htm
Regards
Karthik -
Actual cost line items for orders (KOB1)
Hello everyone,
I need to pull a certain field for an order to the
Actual cost line items for orders report (KOB1), but the field is not available when I
go to the change layout. Can someone let me know how I can have this
field listed?
Thanks in advance for your reply.
Daniel NiculaHi Christian,
Ok, so I would need some ABAP support for this right? I was hoping to do it myself.
But, the strange thing is that the field that I would like to bring in my layout is available in 2 clients in the same system and not in all the clients. I have one client in which this field is not available.
How can that be possible?
Bye! -
MRP RUN for the more than one line item in sales order.
Hi ,
In the sales order nuber of line item are , i will have to take MRP RUN for selected line item .
So plz suggest what development will require?
Abhay
Edited by: abhay patil on May 30, 2008 8:52 AMHI,
U can write separate prog. Which will ask sales order no. and from to line item or multiple line item of sale order. Then in loop internally pass the each line item no to MD50 prog. Which will run in background.
I will give u sample prog. Which I had created for running MRP for all the lines items of given sales order in one go.
*& Report ZPRG_PP_001
REPORT ZPRG_PP_001.
tables vbak.
data: begin of it_vbap occurs 1,
vbeln type vbap-vbeln,
posnr type vbap-posnr,
end of it_vbap.
DATA: P_MODE TYPE C.
Batchinputdata of single transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
parameters : p_vbeln like vbak-vbeln obligatory.
selection-screen skip.
parameters : p_fore radiobutton group mode,
p_back radiobutton group mode default 'X'.
selection-screen end of block b1.
at selection-screen.
Check Sales Order
if not p_vbeln is initial.
select single * from vbak
where vbeln eq p_vbeln.
if sy-subrc <> 0.
message e499(sy) with 'Invalid Sales Order no.' p_vbeln.
endif.
endif.
start-of-selecTION.
Get Sales order items
select vbeln posnr from vbap
into table it_vbap
where vbeln eq p_vbeln.
Set BDC mode
if p_back eq 'X'.
p_mode = 'E'.
else.
p_mode = 'A'.
endif.
Process MD50 BDC
LOOP AT IT_VBAP.
perform bdc_dynpro using 'SAPMM61X' '0160'.
perform bdc_field using 'BDC_CURSOR' 'RM61X-TRMPL'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RM61X-KDAUF' IT_VBAP-VBELN.
perform bdc_field using 'RM61X-KDPOS' IT_VBAP-POSNR.
perform bdc_field using 'RM61X-BANER' '1'.
perform bdc_field using 'RM61X-LIFKZ' '3'.
perform bdc_field using 'RM61X-PLMOD' '3'.
perform bdc_field using 'RM61X-TRMPL' '1'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE' '=XBAC'.
CALL TRANSACTION 'MD50' USING BDCDATA MODE P_MODE.
CLEAR BDCDATA.
REFRESH BDCDATA.
ENDLOOP.
end-of-selection.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
Ajay P. Nikte -
Additional Data On Actual Cost Line Item for Orders. Possible?
Is it possible to show on display of Actual Cost Line Item for Orders the cost center for both settled and not yet settled? As for now we can only view the cost centers that are already settled. Please see attached file for a snap picture of the display.
Thank you in advance.Hi,
How this would be possible? If the document is not yet settled, then cost centre is unknown. Of course, it is stored in settlement rule, but no actual posting was done yet.
Regards,
Eli
Maybe you are looking for
-
Upgrading Imac g4 flat panel 800 mhz
I decided to post this information here because a lot of people are wondering how do i go about upgrading a macintosh imac g4 A.K.A Ilamp as it is known in the mac community. Well this tutorial will walk you through a basic configuration that i recen
-
Can't ftp to site in Dreamweaver
I have just installed Dreamweaver CS4 on a new desktop running Vista. I have set up access to my websites but keep getting an error that access is refused, may lack permissions etc. However, on the same machine I can access my sites using ftp in Inte
-
Rdf file being generated....
Guys, I see the very weired problems (not a frequent... but happend twice in two days) While trying to test the page in my application.... suddenly rdf file gets generated and also public_html folder is generated in model project. Looking at the log
-
Another lock problem ...... but slidely different !
Hi experts, let me present you my problem: i made a program for SRM portal: when the user push a selected push-button, the program creates a project on cproject via remote function call ( BAPI_BUS2172_CREATE ). This program gives back to the user a w
-
Program installed but SCCM advertisement status of failed
Ok, i have scoured this forum and I have not found a direct answer to what i'm about to ask, so if there is a thread on this, please kindly point me to it. now then, here's a higher level description of the issue i am having. using SCCM 2007 SP2. I h