Budget Release Process

Hi
Planing to use budget release process on monthly basis, done relevant configuration but release process is not working
For release done following configuration:
Define Release Scenario
Define Budget Types for Release
Assign Budget Types for Release to Processes
Kindly advice where I am missing
Regards
Upendar

Hi
Thank you for reply
Sorry for later reply
I will explain requirement:
1. we are planning to annual into 12 portions and for this each portion I am trying to use release process
2. Can you please let me know if I want to use release process what is process to be followed, done the following configuration for release process
Define Release Scenario
Define Budget Types for Release
Assign Budget Types for Release to Processes
3. In FMMBC what is the selection we have to use while entering budget with release process
Regards
Upendar

Similar Messages

  • Create GM Budgeting Release Process - GM_BDGT_RELEASE

    Hi,
    Our client wants to load Budget data which includes both FM and GM data. and we are using 4.7ver.  For FM we are using FMBB transaction and for GM we are using GM_BDGT_RELEASE transaction.Grants master record is already created using GMGRANT transaction. We tried to do a BDC for GM_BDGT_RELEASE transaction, but in shdb it is not showing the table control details.
    Then we searched SDN and found some notes to use BAPI_0036_CREATE function module. when we are trying to use this function module, but we are getting some BAPI errors.
    Below are the errors:
    1.Released budget for unreleased/released scenario is not supported by BAPI
    2. No instance of object type BudgetEntryDocGM has been created. External reference:
    Have any of you tried to create document using GM_BDGT_RELEASE transaction. If so please tell us the process to do.
    Thanks.

    Hi Rob,
    Thanks for the email.
    Now it is fixed. I'm able to create Budget for GM in 'unreleased' status. but this BAPI is not posting the budget to FM.
    Do you know how we can post grants budget to FM.
    Thanks.

  • Budget Release

    In our scenerio, we are using budget  functionalty of Project system. However, not using the budget release functionalty.  So, actual get posted as long as the same is within budget.
    My question is like this : If we activate budget release functionalty, posting of actual will be subject to release of  budget even if actual is within the budgeted value ?
    Need your comment
    best regards
    Bharat

    hi..
    make sure availability control is activated..
    as abhinay said, check system status if is AVAC (Availabiltiy control) is indicated..
    system checks against
    if not, activate it using tCode CJBV or you can set for example to automatically activate it during budget allocation.
    however, AVAC can only be activated if you have maintained budget. therefore in your process, be sure to make set up where there is budget before(or during) release of WBS. if you release the WBS and AVAC is not set then posting is possible.
    your requirement is that no body should post actual cost in project unless budget is released.
    to do this AVAC status has to be active and config is set to check against release. in tCode OPSC you can also set the tolerance limits which will be checked by system against postings.

  • Workflow Budget Release

    Good Day Experts,
    I know that one is able to workflow the budget request and supplements via IMA11 and distribute accordingly.  However I have a client that enforces control on budget release (CJ32).
    Currently they follow a manual approval process and once the required approval is obtained the super user updates CJ32 with the amount requested.
    Is there any way that one can automate the budget release request with standard SAP? Custom workflow is currently being considered but any advise will be appreciated.
    Best Regards;
    Werner

    See if the below link is useful:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/f2/05603815ba682ce10000009b38f842/content.htm
    Regards
    Sreenivas

  • SAP PS budget release problem

    We are following MTO scenario and we are releasing SAP Project with save of Sales Order.
    Later we are assigning(CJ30) and releasing(CJ32) budget in SAP Project, with budget release System status "NBUD" replaced with System status "BUD". But, some times SAP is not removing this "NBUD" tick. And later when user try to release PR or perform any other transaction they face error message for system status "NBUD".
    You all are requested to suggest solution for this error.
    Best Regards,
    Vishal Kadia

    Hi,
    First understand the term availability control by going through SAP help and finalize when you want to activate the AVAC against your project.
    AVAC can be activaed by 3 ways
    1. Automatic activation during budget allocation in CJ30
    2. Budget release through CJ32
    3. Manual activation / background activation
    Now in your case you are doing planning by using the activities i.e. 100000 now this is plan cost for your WBS / project.
    If you have planned this cost for interal activity by using resources then it is REM. If you have PR then this commitment
    now in this case system is updated Assigned value for the WBS / project as 100000
    Assigned value = Commitment + REM + Actual
    Now if your AVAC activation during budget allocation through CJ30 -  syem will check that your budget value is equal or more than asigned value otherwise will thorw error i.e 100000 or more than 100000
    If your AVAC activation is during budget release then your release value shoul be same or more than the assigned value otherwise will thorw error i.e 100000 or more than 100000
    You can do the partial alocation of budget or release budget if you dont have any assigned values present in the system or have less than the project / WBS budget.
    Hope you understand now.
    regards,

  • Partial budget release Error

    hi Experts,
    I believe that partial budget release is possible, but i am getting an error it says" Item WBS element NTD-0001060 budget exceeded
    Message no. BP603"
    it is not allowing me to do the partial release of budget.
    in the budget profile followig have been maintained.
    availibilty control-
    act type 1, usage -0.00
    overall -yes
    releases -yes
    object currency - yes
    please advise that do i need to make any changes.
    thanks
    Prashant

    dynamicprashant wrote:
    > Material of 100000- PR hasbeen generated.
    >
    > Original budget is 100000, My client wants to release budget which is less that 100000.  i.e 50000. hence above error.  i am not understanding why system wont allow to relase of partial budget in this senario. because management can later release remaining partial budget...right?
    System is very well allowing to release partial budget, where as you miss understood the concept of partial budget. Budget availability check always compare assigned value against released budget. In your case assigned value is more than budget value.
    If you want to do partial procurement then plan the material on two activities and set the system such a way that PR should be generated on releasing of activity. and release only the first activity so that your PR will generate only for that amount.

  • Release process problem

    Hi,
    I have a problem. currently our system using based on PO document type and net value to trigger release process. now new requirement to use based on account assignment item level so, po doesn't support line level i decided to use CEKKO - USRC1 = KNTTP based on user exit.
    When i set-up charecteistics and assign vaues
    then class assigned to charecteristics ( existing it self)
    When class assignment with release code values.
    Now when i create PO release process are not triggered please through me some lite whether config prob or user exit any thing need to done.
    Regards
    Jask

    goto transaction OMGSCK and check that alll steps are green except the sheckk re release group and releae class step
    in this step 
    Characteristic CEKKO_USRC1 exists (linked with CEKKO-USRC1) =  green
    You must maintain a customer exit for characteristic CEKKO_USRC1= yellow
    if this all looks fine then the master data problems or PO ceration problems

  • Control release of objects till Budget Release in CJ32

    Hi Experts,
    Actually, I have done as suggested in this forum for one of the query by creating a user status and blocking the release of objects till the time the budget is assigned. it is working fine till I allocate budget through CJ30 but the requirement is that the Release of the objects should be allowed only after the Budget Release through CJ32.
    1) How to create a user status which disappers on its own when the Budget is released through CJ32 ?
    2) Also, I want this to get only assigned to the topmost WBS whereas this gets assigned to all the WBS as I had assigned this Status profile in the Proj. profile. ... how to overcome this problem ?
    thanks in advance,
    Vinodh.

    Hi Vinvidh,
    1.If you want at budget release then you need change the status manually,it will not set automatically like when we are doing budgeting in CJ30.
    2.When you are creating a status for WBS  it will apply for all so i dont know how to control at top level only.But may be using substitution u can try at level1 wbs element.
    Regards,
    Muzamil

  • Problem in reversing the released Process order.

    Hi PP Gurus,
    When I'm trying to reverse the Process order release in change process order COR2 system is not allowing me as the menu option is Gray. When I released processed order Control recipe is generated and due to some problem in PI sheet I discarded in CO60 transaction code. So can anybody please tell me how to handle this situation? I mean is this can be resolved by configuration or enhancement?
    Thanks & Regards,
    Abu Arbab

    Hi Krishna,
    Thanks for reply.
    Now tell me what should be the approach we if we don't want to delete the Process order? Say PI sheet is created and sent to it's destination through Background job and later we found some error in PI sheet so and we've discarded that PI sheet. In case when I don't want to delete or Teco Process order, what will be the process in this case?
    Thanks & Regards,
    Abu Arbab

  • How to make invoice verification process non-release process?

    Hi friends,
    I am doing incoming invoice verification (MIRO), once post it, I will have a message saying (document XXXXXX was created (document is blocked)). then I have to go to T-code MRBR to release it.
    My question is: where could configure this process to be an non-release process?
    Thanks,
    Linda

    Config. path.
    MM \ LIV \ Invoice block \ Set tolerance limits
    See also Item amount check (same path) in case this has been activated too.
    Though presumably you want to have some tolerances unless it's a sandbox system.
    Cheers,
    Nick

  • PR/PO release process

    Need help SAP gurus!!! =)
    Our company has many approvers, so I maintained the appropriate release codes and strategies for the PR/PO release process. Now, they will have to release it using ME55. In the transaction, you will input the appropriate release code specific of the approving user.
    What I want to happen is, Once the approver will use the ME55 transaction its release code will automatically appear and it can not be change. How can I solve this? I tried creating a Transaction Variant, but still my problem can't be solved. PLS help! Many Thanks! =)
    Mik

    Hi Buddy,
    Option 1:
    In ME55 screen, enter the Release code and go to SYSTEM-User Profile-HOLD DATA.
    Once done acknowledgemetn message prompt as "Data was held"
    Try to execute for first time then go out to the screen try again to execute the ME55 you will see that the relecode is defualted.
    Option 2:
    In ME55, enter the release code and SAVE as variant. Once done try to execute for first time. Then go out to that screen.
    DO again ME55, rel code will be defaulted also.
    Hope this solves your issue.
    regards,
    Maia

  • Prevent reschedule on released process order in APO

    Hi,
    We have a business requirement that does not want APO to reschedule on released process orders regardless of production posting quantity.  (don't want to change the order end date/time)  It is similar to R/3 scheduling type "only capacity requirements", but with visibility on APO for resource capacity.
    I tried to implement CIF user exit  EXIT_/SAPAPO/SAPLCIF_ORD_001 with different logics, but still not able to achieve it.  How can we make the system do what we want?  What is the key for remain process time calculation?  Please advice.

    For example: we have a released process order that starts at 10/01/2007 00:00:00 and ends at 10/06/2007 23:59:59 with quantity 7000 KG (1000 kg of production rate per day).
    When a production posting is made (for example: 700 KG was posted on 10/01/2007 23:59:59), CIF sends the update to APO and APO reschedule the order based on the remaining quantity 6300 KG) and the end time of this order becomes 10/07/2007 07:12:00.   In our lines, the production order may not be started on time and posting may be different than what we expected, but we want the order still shows up in APO as start time 10/01/2007 00:00:00 and end time 10/06/2007 23:59:59 with daily distribution of 1050 KG for 10/02 ~ 10/06.  This way, it won't mess up the receipts and resource capacity on PPT for next week's production. 
    Thank you.

  • No Authorization for release process error for Purchase requisition App.

    We have configured a custom workflow for the purchase requisition and we are getting following error while:
    You have no authorization for a release process
    You have no authorization for a release process [GBAPP_APV_MSG/017] (error)
    No exception text available [/IWBEP/CX_MGW_BUSI_EXCEPTION] (error)

    Hi Masa,
    I have the same problem, I did the test to run a workitem from SAPGUI inbox and works well.
    The strategy is defined correctly, but continue with the error.
    2015-03-27 17:36:21 The following problem occurred: HTTP request failed400,Bad Request,{"error":{"code":"GBAPP_APV_MSG/017","message":{"lang":"es","value":"Not authorized for release process"},"innererror":{"transactionid":"551461B844396C12E1000000B52A6013","timestamp":"20150327201237.8762600","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/017","message":"Not authorized for release process","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"","propertyref":"","severity":"error"}]}}} - 
    Please your Help.
    Regards,
    Francisco.

  • Tables for Release Process

    Hi All,
    What are all the Tables associated with the Release Process.
    Advance thanks
    Regards
    Arjun

    EKAB   - Release Documentation 
    EKEH    - Scheduling Agreement Release Documentation 
    EKEK    - Header Data for Scheduling Agreement Releases 
    T161E   -  Release Codes
    T161F   -  Release Point Assignment for Purchase Requisition
    T161G   -  Release Prerequisite, Purchase Requisition
    T161H   -  Fields for Release Procedure, Purchase Requisitio
    T161I    -  Determination of Release Strategy 
    T161S   -  Release Indicator, Purchase Requisition
    T161T   -  Texts for Purchasing Document Types
    T161U  -   Texts for Release Indicator 
    T163P    -   Release Creation Profile
    T163S    -  Description for Release Creation Profile 
    T16FB    -  Release Indicators: Purchasing Document
    T16FC    -  Release Codes
    T16FD    -  Description of Release Codes
    T16FE     -  Descriptions of Release Indicators: Purchasing Do
    T16FG    -   Release Groups
    T16FH    -   Descriptions of Release Groups
    T16FK    -   Release Statuses
    T16FS     -   Release Strategies

  • Regarding Error Message while releasing Process Order

    Dear friends,
                              While releasing process order i m getting following error message.
    " Storage location in PUB(loc1) is not same as storage location (loc2)''.
    how to remove this error and release the order.
    Thanks & regards,
    Sandip Sonar

    Hi Sandip,
    The error message LP 099 'Stor. location in PUB X is not the same as prod.stor. location Y' is issued when the system finds  inconsistancy in your customizing of the couple storage location - Production supply area for your components in your process order.                                                                               
    The logic of the storage location determination is the following ...
    The issuing storage location is determined in three steps:                                                                               
    1. First, the issue storage location of the material to be issued   (MARC-LGPRO) is transferred to the material master from the  MRP    data if it is filled.                                                 
    2. The system overwrites this value with the issue storage location from the bill of material (RC29P-LGORT, STPO-LGORT) if it is     filled.                                                               
    3. If the operation to which the component is assigned in production  order contains a work center with supply area, the storage    location is transferred from this supply area (PVBE-LGORT).     However, this transfer is only carried out if storage location  data (MARD) is maintained for this storage location for the    material.                                                                               
    The logic of the supply area determination:                              
    Priority of supply area determination for WM staging is as follows :     
    1. Supply Area of Work Center               (highest priority)   If no supply area defined look to                                     
    2. Supply Area in item of Bill of material  (second priority)   If no supply area defined look to                                     
    3. Material Master View MRP2                (third priority)         If no supply area defined -> Error message LP 099                                                                               
    I hope this helps in sorting the issue.  
    Regards,
    Mauro

Maybe you are looking for