Buffalo Linkstation not accessible in Mavericks

Hello All,
I have recently purchased a Buffalo Linkstation Pro Duo model no. LS-WX4.0TL/R1 for an IT client of mine that needs to backup both PC and Mac computers.
When I go to map to the NAS via AFP I receive an error that the particular location is not available, or cannot be accessed.
This is peculiar because I have used this particular NAS in other Mac environments running Lion with no issues.
Has Apple restructured AFP in Mavericks?
Also, I have logged into the NAS user interface and checked for Firmware updates. The NAS reports that it is running the latest firmware.
I have posted this same question on the Buffalo support forums. They said to update firmware, and then to contact Apple Support if there are further issues.
Does anyone have any insight to this issue? Be it regarding AFP in Mavericks, or firmware for the NAS?
Any help is much appreciated. Thanks so much!

Hi,
I'm having the same problem with a linkstation quad I purchased yesterday - works fine over SMB but cannot access via AFP.
Running mountain lion and mavericks and same problem in both, have already upgraded to latest firmware.
Dan

Similar Messages

Buffalo Linkstation not connecting to SLM2024

I have recently installed an SLM2024 Gigabit switch. We have a mixture of devices on the switch, desktops, servers, printers, wireless access points and all are working ok. We also have four Buffalo Linkstations with Gigabit Ethernet. Each linkstation has a DHCP reservation but when connected to the SLM2024 the ip address is not issued and the linkstation is not accessible as the default ip address is used by the devices. When the linkstations are connected to a Netgear switch they work as expected. The SLM2024 was purchased to replace the Netgear as it only has 2 gigabit ports.
I have not made any changes to the SLM2024 configuration. Any ideas?

Hi Richard,
The Buffalo manual suggests for the linkstation;
If the LINK/ACT LED on the front of LinkStation is lit, your LinkStation is connected properly.
If the LINK/ACT LED is not lit, make sure that:
• Both LinkStation and the switch or PC are powered on.
• The Ethernet Cable is securely fastened to both devices.
• The Ethernet Cable is not damaged; verify this by trying another Ethernet Cable.
If the link light is not properly lit, Buffalo suggest the following, contact;
Web:   www.buffalotech.com
E-mail:   [email protected]
Telephone: (866)-752-6210 (USA & Canada only
But the manual leaves alot of troubleshooting out, is the link/act light flashing who knows, port statistics on the switch port will tell you if packets are TX and RX out the switch port to the linkstation.
     1. It would be interesting to see a screen captures of linkstation's SLM switch port statistics.
(This will tell me if the switch port is receiving and sending traffic in and out of the switch port)
      2. It would be interesting to see a screen capture of the linkststation's SLM port status.
(This will tell me if the linkstation has negotiated link speed and duplex correctly)
There is a process mentioned at the buffalo support page that illustrates how to directly connect a PC to the linkstation. But I guess if your PC can communicate using the Buffalo easysetup utility, you can manually configure the IP and Ethernet settings onto the unit.
Sounds like setting up a port mirror would be useful to see the DHCP and ethernet interaction to the Linkstation.
So far there are two things to reply with, port status and port statistics.
       3. Why not use the SLM to port mirror the linkstation port and capture the DHCP process via a free tool called wireshark.
       4. Please reply with a short wireshark capture ?
Good luck and seasons greetings,
regards Dave

Admin panel linkstation not accessible

hi,
I have a brandnew NAS Buffalo Linkstation LS 220D,
and I cannot use the admin panel from within Firefox. IE works fine, as does Safari on iPad.
When connecting to the admin panel I get an error that my account is restricted and when trying to login it won't accept my credentials.
This is the case on all my windows computers, desktops and laptops alike. So I'm assuming whatever is blocking this is a synched feature.
Or Is there a preset security feature that might have to do with it?
Any ideas greatly appreciated!
FF and NAS firmware are up to date.

This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Buffalo Linkstation works with all PC's but not iMac - With Airport Extreme

Hi. I hope someone can help. Been at this for days, even AppleCare can't help....
We have a Buffalo linkstation hooked to a new Airport Extreme.
All PCs can see it and view documents, iTunes, etc. My iMac cannot. Actually, I think it sees it but it's a mere file on my desktop. When I click on it, it pulls up a Finder type window, but this Buffalo icon (like network icon) can't be mounted in my normal finder main section. I can't figure out how to do that.
When I open Finder, I don't see the buffalo at all but have to go thru many libraries to find it. When I click on it ("connect") to it, It says "Select the SMB/CIFS shared volume you want to connect to: I click on the name, but it says "the alias blablabla could not be opened because the original item cannot be found. It gives the option to fix alias so I hit that and it puts me in my "documents" area and won't let me go anywhere else.
OMG... Can someone tell me how to get this thing working? I can see the files but they are so buried. I'd like to take this Buffalo which seems to be on my desktop and mount it? to the right area of my Finder.
All I want to do is see the darned iTunes on the buffalo wirelessly via airport extreme. LOL All other computers (PC's) did this instantly. Help?

Yes, I can see everything I need to see (external HD)....
I even dragged the darned thing into the finder...
Now my upper left box of the finder says:
Network
Share (that's my external buffalo HD)
Windox XP
iMac
The problem with the above is that "Share" is not mounted. It has the eject button next to it. I think (maybe) I could get this functioning if I could mount this darned thing but I can't for the life of me get it to do that. Any ideas?
EDIT: I'm not sure how to use directory access utility. Do I need to?
Message was edited by: meagain1

Buffalo Linkstation is not recognized when plugged directly into mac

I recently received a Buffalo Linkstation and tried setting it up, when i got it all up and running, the lights come on, but it won't connect to my mac, it's connected via ethernet cable
I do not have it plugged into a router and don't want to go get one, I have two wireless routers, but when i first used one for both the internet and the linkstation, it was too slow, and when i tried using one for the internet and one for the linkstation, they interfere with each other and defeat the purpose.
I just want it to go from the hard drive to the mac, then when i get it all set up, i'll add a printer
I know this defeats the purpose of the networking capability and that i should just go get an external hard drive, but I did have one and it stopped working, so i sent it in and got this.
Any help whatsoever would be appreciated

I've never seen one of these puppies but your question
was intriguing so I looked at Bufflalo Technology's web
site. They claim to have a built-in ftp server, and that
sounds like how you're gonna connect. The first thing to
do is figure out the linkstation's ip address. Hopefully the
default will be listed in the manual, or maybe you set it
in the setup process. Otherwise, you've got to search
your network for port 21. If it gets its ip address via DHCP,
you need a DHCP server in the mix. I bet your wireless
router has one, and you could use it to get you going.
Once you have the ip address, you can mount the device
in the Finder using Command-K and entering
ftp://xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the ip address.
Good luck!
Powerbook G4, iMac (Intel), and tons of hardware sitting in the closet Mac OS X (10.4.8)

Time Machine - Not Seeing My Buffalo LinkStation Hard Drive

Currently have a Buffalo LinkStation 2TB hard drive on my home network. The Buffalo is connected to my router (Netgear WGR614v10). It is not physically connected to my iMac, but I do have a LinkStation icon on my desktop in order to add files to.
When trying to start Time Machine, I click "Choose Backup Disk" but the only drive listed is my Maxtor 750GB that I had when I purchased my iMac a couple of years ago. The Maxtor was purchased when I first bought the iMac because I wanted to use Time Machine (my iMac has a 750GB internal hard drive).
Because the Maxtor 750GB is the only backup drive listed, I click "Set Up Time Capsule" but the "AirPort Utility" says it was unable to find any AirPort wireless devices. The only thing I can do at this point is "Rescan" which only proves the same result. There is a "Manual Setup" button at the bottom but it is greyed out and I can't select it.
How do I configure the Buffalo LinkStation so Time Machine will view it as an available backup drive?
Also, how would I do this if I added an additional hard drive (or two or three more)?
I have a feeling this is probably obvious and I'm just missing it.
Any help would be appreciated! Thanks in advance!
Gtroop

Gtrcoop007 wrote:
Currently have a Buffalo LinkStation 2TB hard drive on my home network. The Buffalo is connected to my router (Netgear WGR614v10). It is not physically connected to my iMac, but I do have a LinkStation icon on my desktop in order to add files to.
Time Machine does not work well, if at all, with some NAS devices. See #2 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

One of two wiki is not accessible after upgrade to maverick

Hello,
I migrated a 10.8.5 server to 10.9.1 today. I use the wiki and profile manager on the server. My problem is that I can see my two wiki, but one of them is not accessible. When I click over it I have an error message that the page you search for is not found. It is not an error from safari, is more an error from the wiki itself.
I think that my problem is the name of the wiki got an accent in it. The name of the wiki is "Procédure et standard" and the url in safari when I click over is "/wiki/projects/procédureetstandard/Procdure_et_standard.html" It is possible to search for an article in this wiki, and I will find him without any problem.
I tryed the command
wikiadmin fixPermissions
wikiadmin updateSchema
without success. I have a time machine backup from the server 10.8.5. What can I try?
Thanks

This is not that simple to do, all the process is for a 10.6.4 server. In 10.9 everything changed. I have less than 50 posts in the wiki. I think I will start a new wiki, and move all the article by the interface. It will be more "clean".
Thanks to try to help me Linc

Will the Buffalo LinkStation Live work with my Mac Book?

I am wanting to get a hard drive that will wirelessly back up my two MacBooks using Time Machine Software. Also, I would like to be able to hook up my printer to this device so that we can share a printer between the two Macbooks wirelessly.
I came across the "Buffalo LinkStation Live™ - LS-CHL". It seems to do exactly what I want, but I can not tell if it is compatible with Time Machine software or if I have to use their bundled software.
Basically, I want to share a backup HD and printer between my two MacBooks....wirelessly. I do not need a router because I already have one. I understand a Time Capsule would probably work, but it is more than I want to spend.
Here is a link to the LinkStation Live™ - LS-CHL.
http://www.buffalotech.com/products/network-storage/linkstation/linkstation-live -ls-chl/
THANK YOU!

I'm not sure about the 2007 mini, but a quick check is to open your system preferences and look for Bluetooth preferences. If there aren't any, then no magic mouse for you...

Music I purchased on I Tunes is not available when I open ITunes in I Movie. I Movie says those files are "protected" and not accessible. What does that mean and can I change them to "unprotected" so I can use them in IMovie?

Most of the music that I purchased on I Tunes I bought and downloaded on my old I Mac which I replaced with this I Mac about 9 months ago. When I"m using I Movie on this I Mac and try to open I Tunes tab in I Movie, most of the files are not accessible because I Movie says those fields are protected. What does that mean and can I change those files to unprotected so they show up in my music in IMovie?
This I Mac is OS X version 10.9.5 Maverick, 2.7GHz Intel Core 15 processor, 8GB 1600MHz DDR3 memory.

Your older iTunes music purchases included DRM software to prevent sharing.
iTunes Store: iTunes Plus Frequently Asked Questions (FAQ) - Apple Support
For some money you can get it removed and get a better quality file to boot.

Buffalo Linkstation - Sync no Pictures

first. Sorry about my english ...
all my music, videos and pictures are at the "buffalo linkstation".
and itunes see and play musik and videos and sync all with ATV ... but not the pictures, and yes, i can select it in itunes und see all the folders ...
wy ?

I am having the same problem synching pictures only (not music, video or podcasts) located on a Buffalo Linkstation Pro, and the problem is with my iPhone and Apple TV. I recently moved my files to the Linkstation L drive from a smaller Western Digital D drive (Library still on C drive). Synch worked fine for severl days on both the iPhone and Apple TV, but then it started to hang synching pictures. When I move the pictures back to the WD D drive or to the C drive, the synch works perfectly. However, iTunes will not synch pictures located on the Buffalo Linkstation L drive (which does show up as a shared drive, too).
Appreciate any advice on this as I have very large files and need he storage capacity of the Buffalo Linkstation.

Buffalo Linkstation Pro Duo and Time Machine

I am thinking of buying the Buffalo Linkstation Pro Duo 1Tb as a backup for my work based Macs (2 Power Mac G5's). My main machine has 350Gb and a 150Gb drives, while my second one has a 150Gb drive. None of the drives are anywhere near full. For this reason, I think that I could even get away with backing up to 500Gb RAID (the Buffalo has 2x500Gb). Although as a backup drive, it may not be as important to have RAID.
Anyway.....I read a review about the Buffalo that said that it could only handle 128 characters for filenames including the directory structure. Will this matter with Time Machine?
I am also thinking of the same drive as a RAID for my home network to store photos and maybe as Time Machine backups of user folders. Again will a 128 character limitation be a problem if I simply store photos on the drive and do not use Time Machine?
Thanks,
Charlie

http://www.mac-help.com/forums/showthread.php?t=840

Buffalo LinkStation Live and NasNavigator 2 problems with Mac

I am using a Buffalo LinkStation Live (LS-CH1.0TL) with my MacBook. With the Firewell turned off on my Mac it works really well. Unfortunately, with the Firewall on, a perpetual dialogue box appears asking to give permission to allow incoming connections from NasNavigator 2. Whether you click Allow or Deny, the message appears again after about 10 seconds. This process continues indefinitely. It works fine with Windows 7 (either run via Mac or on my previous PC). I have updated all software/firmware and reformatted and restored factory settings on the LinkStation.
Buffalo are stating that this is an Apple issue so can anyone help or is this going to be technical-support-tennis where each are blaming the other?! Your help would be greatly appreciated!
Thanks in advance for your help!

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Connecting My E7 to my Buffalo Linkstation over a ...

Can anyone please help I've tried using the remote drive option to access my Buffalo Linkstation using the web address http://192.168.1.13:9050/ shown on my pc - I've entered the correct login and password, but all i get is unable to coonect 'Link Station' Not found check settings?

Open needed port(s) for webdav in your router,
Perhaps your firewall inside the phone is blocking or you haven´t the right settings in your router.
Dynamic ipadress?
https?
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Anyone help setup TC with Buffalo Linkstation NAS

I have a TIme Capsule working great with my iMac. I also have a Buffalo Linkstation Live 1Tb NAS.
There is a smartphone app that allows you to share a folder from your NAS over WiFi and 3G. I want to do this so I can share my music over my 3G when out and about, and play it (I am in UK and have unlimited 3G internet).
However in the easywebaccess setting it says I havent got UPnP. I'm unsure how to enale/set this in my TC. I goto advanced setting on my NAS and says I need to setup oorts etc, I dont know how to do this on a TC.
When trying advanced setup I get this error "UPnP Gateway not found and/or doesn't support port forwarding, use manual setup."
Anyone help please?
cheers

Let me suggest you swap your system or your thinking..
If you use a modem router to which the TC is connected tell me more.. The TC can be bridged and the other device become the router.. this makes things easier as you can then track ports that upnp opens.. and see what you need to do.
I am unsure where the app is loaded.. is it in the buffalo or the phone??
Mostly iphone is rigged to itunes, welded or melded would be better as it is almost impossible to escape itunes.. so when you coyly refer to smartphone.. I presume you are not actually talking about iphone but the that horrible company that had the gall to encroach on Apple's space.
To get music to work, it must use a standard method eg http, or ftp etc.. all you need to do is to tell me what method it uses if you don't have the actual ports it uses.
Apple buiild everything to operate in their own paid for realm of itunes.. icloud etc. When you try to bypass that.. you need to get the apple router out of the way.
(It might also be much easier to use an SD-Card or some other memory type if you can plug those in).

TimeMachine backing up to Buffalo LinkStation

Hi there,
I'm considering upgrading to Leopard primarily because of the Time Machine, but I'm not certain I would be able to use it as I'm envisioning it.
I have a Buffalo LinkStation NAS drive, is it possible to configure Time Machine to use it as a backup storage drive? I have a MacBook Pro, so it would be ideal to have it backed up to NAS since it wouldn't need to be connected.
Is that possible? If not, do you know of any other software that would that sort of backup with Buffalo NAS (automated backup, set it and forget it kind of thing).
Thanks,
Alex

Time Machine doesn't currently support backing up to a generic NAS. It supports backing up to Time Capsule (which is a NAS, but which has specifications that Apple knows and supports).
There are reports here of people who have gotten Time Machine working with various NAS products, and it works in some cases, while in other cases it has stopped working and caused crashes in Leopard. I'd say, since it isn't supported (and since the only way to get it to work is to set a system preferences like ...allowUnsupportedNetworkVolumes), that it's best to avoid it and go with Time Capsule, or with a locally attached drive (Firewire preferred, but USB2 would work).

Buffalo Linkstation not accessible in Mavericks

Similar Messages

Maybe you are looking for