Buffalo Wireless-G and Apple's WDS

I have the "Buffalo Wireless-G 125* High-Speed Broadband Router and Access Point with High Gain Antenna". Does this router do WDS with the Airport Express or Airport Extreme?
Thanks!
Conal

There are few that are WDS compatible, here is a list of those that do for sure work.
http://www.macfixit.com/article.php?story=20070126001601828
Don

Similar Messages

Can i use Apple Wireless Keyboard and Apple Magic Trackpad with my macbook air 11" 2010

Can i use new Apple Wireless Keyboard and Apple Magic Trackpad with my macbook air 11" 2010?
thank
dean

Yes. Pair using Bluetooth with your MacBook Air.

Westell 327W as main wireless base and AE as WDS wired to Mac mini

I'm trying to get internet access to my non-airport-ready mini, without having my Westell 327W wireless router in the same room, and no cat5 cables stretched across my house.
Does anyone know if it's possible to use AE to pick up the 327W's signal and feed it wired to the mini? I've read about WDS mode in AE, but I've heard there may be issues with that Westell router. Are there any wireless routers that could definitely work with AE in the manner I've described?
FYI, I use Verizon DSL

Are there any wireless routers that could definitely work with AE in the manner I've described?
Another AirPort Express (AX) or an AirPort Extreme base station (AEBS).

HT1515 Buffalo LinkStation 420 and Apple Airport Extreme

How do I setup an Airport Extreme so that it works with a Buffalo LinkStation 420 (NAS)? Right now the NAS is connected to the Airport Extreme via ethernet cable but I can't see the NAS.

There are few that are WDS compatible, here is a list of those that do for sure work.
http://www.macfixit.com/article.php?story=20070126001601828
Don

Time Capsule needs to be reset every time I print wirelessly or watch Apple TV

Hello all!
My Time Capsule keeps dropping my wireless printer and Apple TV. Every time I want to stream a movie to my Apple TV it needs to be reset, and everytime I want to print wirelessly it needs to be reset. However, my internet connection remains constant and never has any interuptions.
Please help, it's getting really annoying to run upstairs to reset the time capsule every time I wanna watch a movie.
Thanks

It is reported here all the time that the TC needs daily reboots.. you are highly fortunate that it is only weekly..
The fact is the old TC using 7.5 firmware was probably hugely more reliable than the current one which is not able to be flashed back beyond 7.6. There is a bug.. and as yet no Apple confession of issues.
But most people can get away without a reboot.. you just need to disconnect all users.. which was an option in the v5 utility.. now left out of v6.
Strongly recommend you install v5 utility.
(Or get electrical timer to restart the TC on a nightly basis).
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
Simple way.. reboot the TC to lose the connections..
Might take a network reboot.
But from 5.6 utility you can disconnnect all users.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

2 Airport Extermes, WDS, Macbook Pro and apple tv.

So i have 1 extreme connected to the cable modem. It is setup as the main, a second is setup as remote and there is also a PS3 plugged into it. I just upgraded my macbook pro to the N wireless card.
The network is 802n (b/g) compatible. There are no other choices with N (even holding down control).
So I go to copy a file wirelessly to my apple tv from the macbook pro and the fastest transfer speeds I am seeing is 150Kb/sec. Why is the transfer speed so slow! This is really frustrating. Copy files over a network is supposed to be fast.

Since you are using WDS the network is using 802.11g. The unfortunate part of WDS is that each WDS link cuts your available bandwidth in half.
So upgrading your MacBook Pro to 802.11n really didn't gain you anything when you use WDS.
If both of your AirPort Extreme base station (AEBS) are 802.11n capable, you should use 802.11n's "extend network" feature instead of WDS. This doesn't have nearly the bandwidth penalty that WDS does.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

I was sold a refurbished Iphone 4 with 8 days talk time on it without being told, and Apple said it doesn't approve of that, help! What should I do? It was purchased at Wireless Wave

I purchased a "new" iphone 4 after my first one was dropped in some water. I paid around $580. 4 days later, my wet iphone started working again, so I was pretty happy I could return the new one. When I went to the wireless wave location, they said there had to be less than thirty minutes talk time for it to be returned; no problem! Big problem! I had only owned the phone for 6 days, but there was 8 DAYS of TALK TIME on the phone in total! It wasn't even mathematically possible! The manager was more worried about whether or not I had actually used it for the 30 minutes. He couldn't have cared less that I had obviously paid full price for someone elses discarded cell phone without knowing it! I need some advice on how to handle this! I called an Apple location and they said they do NOT condone selling any refurbished Iphone products and were not aware of this. I sent an email to apple's legal email, but honestly I am just so frusturated. I tried contacting wireless wave, but obviously they don't want to talk to me. I was given no explanation at the time of return as to why there would be 8 days of talk time on a "brand new" iphone 4. They were actually trying to call my provider and make sure I hadn't used it for more than the allotted time. I was given a refund after just about losing my cool on the poor guy working there. He was in fact very nice and very understanding, but could offer no help besides giving me a refund. My husband and I have purchased many phones from the certain wireless wave location, and I can't help but wonder how many other used products we have purchased!

It's not an Apple issue and Apple has nothing to do with it.
The only way to buy an iPhone officially refurbished by Apple is to buy it from an Apple store or via Apple's website.
Refurbished iPhones sold via other retailers are not refurbished by Apple.
Sounds like Wireless Wave did all they could... they refunded your money.
Your only issue is with them. Stop getting all worked up over it.

Self assigned ip and can't connect wirelessly on any apple device

Man oh man... this issue has been festering for almost an entire year now and I have not found a solution. Last August (2009) my macbook stopped wirelessly connecting to my ATT 2WIRE dsl modem saying it had a self assigned ip address. I bought the computer in July and could connect with no issues for about a month. Ever since then, I've been connected via ethernet with slow connection. At the same time, the 2 iPhones in our household also could not connect wirelessly. One G5 could connect wirelessly but was extremely weak and often dropped the signal.
I did tons of research and found zillions of other people with this issue and no resolution. I've tried every solution on macrumors, and apple discussions with no results... I've disabled firewall, renewed DHCP, tried DHCP manual (which then changes the status to say I'm connected, but nothing works in my browser), restarted, etc. At work, I can connect to our Linksys router wirelessly with no issues. When my friends come over, their macbooks and iPhones don't work either!
Originally I thought the issue was my modem so I ordered another one. Same issue. Just this week I was at my wits end and cancelled my service with ATT and switched to Clear. I acquired a Linksys router to connect to the Clear Modem and I'm STILL having this issue. The difference is now that my iPhone can connect wirelessly but my macbook still cannot. The router is a Linksys WRT51ab. My macbook pro is on version 10.5.8. I can only assume that some kind of update to airport is causing the problem. As of now, my IPv4 address is: 169.254.111.225
Please someone help me! I promise some kind of reward if you can help me fix this.

Based on the model number, your Linksys router is OLD.
I'd actually suspect that your router has been the problem.
You can download the full user manual here --> http://homedownloads.cisco.com/downloads/wrt51ab_ug.pdf
I don't know if you ever secured your wireless router or renamed it from the factory defaults.
If it your Linksys wireless router is not password secured, it's possible that someone else changed settings about the time things stopped connecting.
Regardless, you can completely reset the Linksys to the factory defaults by holding down the Reset button on the Linksys for more than 10 seconds.
Do that first.
Then see if things 'magically' start connecting again. I'm guessing the phones will connect, but the Mac still won't, because of the IP address in the current configuration.
If not, here's how to configure your Mac network settings.
On your Mac, in System Preferences, Internet and Network, Network,
Click on Location, Edit Location
Click the + sign to create a new location called '_test'
(The underscore before the name will put it at the top of your Locations list where it's easy to find)
Select Ethernet (wired)
First, we'll let DHCP try to set the address.
Click Apply.
Move the selection back to Ethernet, and watch the Status.
If it shows Connected and IP address appears after a few moments, at least the WIRED configuration is working.
Now IF the Wired configuration works, lets move on to the wireless configuration...
(If the Wired configuration is still not working, post back and we'll work through it.)
Still in System Preferences, Internet and Network, Network, with the _test location you just created...
Select the AirPort interface in the left column.
Turn AirPort On.
If no Network Name appears, click on the up/down button and select Join Other Network and select your Linksys router name.
Click 'Apply'.
Leave DHCP settings alone and watch the Status to see if it connects.
Let me know what happens!

How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

Welcome to the Apple Community.
Settings > General > Network > WiFi and select your network.

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

I have c 6180 wireless printer and an apple ipad2, can the printer print from the ipad?

i have c 6180 wireless printer and an apple ipad2, can the printer print from the ipad? how can i set it up?

Not with the built-in AirPrint print function. However, you can download free and cheap print apps that can provide some (limited) printing abilities. HP's iPrint is one of those.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Itunes crashes on addition of artwork to movie folder and apple tv (2nd generation) will not see itunes while itunes plays playlist over wireless network to airport express??

I have 4 non apple pc exhibiting same issue. Whether you have ten movies on board the pc or 500 on external storage Itunes locks up after you "get info" and try to add video cover from IMDB whether the art is in my pictures on PC or off USB key / external storage. Very frustrating to the extent that I bought a macbook thinking that it may be a non apple issue and bingo same issue whether films on macbook or on nas/ external usb. Effectively itunes may be made to crash by adding artwork!
2nd Issue noticed at weekend I have a small music library of approx. 35gb music in itunes music folder when a playlist was being played within itunes and airplay was selected to an airport express that is connected to distributed music system in house all works well during party. Guest have access to DJ app via remote app or control of content being player. My kids disappeared into the front room and while playlist on notices 2 things. The ipod touch ( 4 mths old) would not connect to apple tv player 2nd generation while airplay on to music system and the infra red remote remote worked fine but apple tv would not see video files in itunes while airplay on. When airplay disabled all absolutley fine , re- enabled airplay and apple tv bumped again. I have a wireless N router and have successfully had 2 apple tv 2nd generation working off itunes video files without issue. There are delays but both are seen in remote app and both players see itunes folders. I would have thought video streaming to apple tv players sucked up more bandwidth that one airplay to airport express and one apple tv 2nd gen.
Anyone experienced same

OK - I managed to fix this. Will document for others.
I started to think it was a firewall thing. So I turned off both my Windows 7 firewall and my BT Home hub firewall. It started working!
So turned back on the BT home hub firewall - still working. So it must be a windows 7 firewall.
Went in and checked that Itunes was there as an exception... Yep. So why still not working?
Found out that the entry in my Windows 7 firewall said I-Tunes - but when you looked at the details button it wasnt pointing to a program - it was just blank.
So added a new entry and pointed that at the I-Tunes exe file.
Now all working...

Windows Vista/ Boot Camp and Apple wireless keyboard/mouse

Could someone please outline the steps needed to make the apple wireless mouse and keyboard work with Windows Vista on the Mac. It was working fine before I installed the Mac drivers, but now nothing. Whats worse is my computer boots to windows automatically now so I can't use it at present!
All help very gratefully received.
Many thanks
Dominic

You cannot use a keyboard or any other peripheral with the tv, I'm afraid. Think of it more like a giant ipod than a little mini in that respect.

TS1453 Apple TV doesn't show up in my iTunes. I've done all the troubleshooting steps, updated all software, restarted Apple TV, wireless router and computer. Devices doesn't show up at all in my sidebar.Apple TV doesn't show up in preferences

Help. My Apple TV won't sync with my computer. I've done all the troubleshooting tips, but Apple TV doesn't show up in my Preferences under devices.
2. Reconnect Apple TV to iTunes.
Choose iTunes > Preferences (Mac) or Edit > Preferences (Windows), click Apple TV, and make sure "Look for Apple TVs" is selected.
I see no option to select "look for Apple TV's" in Preferences, and there is no device list at all in my sidebar.
3. If Firewall is on in Mac OS X (in the Sharing pane of System Preferences), make sure iTunes Music Sharing is selected.
There is no option to select iTunes Music Sharing in my System Preferences - see screenshot
I've updated all software, restarted Apple TV, my wireless router, and my computer. Both my computer and the Apple TV are connected to the same wireless network and both are operating properly. They just wont connect to each other.
Does anyone have any suggestions?

FIRSTLY: bookmark following for further reference (it describes basic setup, both to link for syncing and to stream - from any computer.)
Apple TV (1st generation): Differences between syncing and streaming" )
Now as to your problem: If you check under "Computers" in the "Settings" menu you will most likely see the name of your iTunes library Greyed out. IF that's the case, you'll basically need to re-setup your ATV., you can do so as follows (instructions are intentionally over described, but basically your disconnecting then reconnecting your ATV1. Downside (which seems to come with all methods is that you'll have to resync all your media)
**A (not ideal but effective solution)
If ATV 1 had been working but suddenly 'disappeared" from iTunes sidebar
The following solution will almost surely work to regain your ability to Sync:
QUIT iTunes
Select "Computers" from "Settings" Menu.
Select your "greyed out" iTunes library.
This will bring up a window named "Disconnect from iTunes"
You're now given the choice to Cancel, or disconnect. WITH THE WARNING that if you disconnect any content synced with iTunes, will be erased. (in fact it will be removed from your ATV but not your computer)
Assuming ALL of your media IS on your computer, Go ahead and disconnect.
Follow instructions in the Apple doc above about setting up your ATV as a paired computer.
After you ATV gen1 reappears in the sidebar. Reset all your desired syncing preferences,
Begin syncing.
All will be fine again, (at least till the next time this occurs.) I've had to do this twice this year.
ALTERNATELY:
SHARING (a QUICKER, less destructive TEMPORARY solution (if you just want to play your media now)
You CAN set your computer to Share by following instructions in the same doc under the heading:
"How to connect to a shared computer"
HOWEVER, this will not allow you to sync info.
I've read alternate solutions on this board, one involved changing the name of your iTunes Library etc... you may wish to try this first (if it applies) https://discussions.apple.com/message/17943841?ac_cid=142432#17943841
What I'd like to know: What causes this problem... I'm suspecting iTunes updates, or any iTunes database issues or crashes. Or maybe too many visitors connecting to your other Apple devices (ATV 2 for example) or heck the weather in Guatemala...

Buffalo Wireless-G and Apple's WDS

Similar Messages

Maybe you are looking for