Buffer I/O error on device hda1, logical block 81934

I getting the follow erro message when I session into the CUE of the UC520. All advice appreciated. I read the similar post, however  I'm not given any prompts to make a selection.
Buffer I/O error on device hda1, logical block 81934
Processing manifests . Error processing file exceptions.IOError [Errno 5] Input/output error
. . . . . . Error processing file zlib.error Error -3 while decompressing: invalid distances set
. . . . . . . . Error processing file zlib.error Error -3 while decompressing: invalid distances set
. . complete
==> Management interface is eth0
==> Management interface is eth0
malloc: builtins/evalfile.c:138: assertion botched
free: start and end chunk sizes differ
Stopping myself.../etc/rc.d/rc.aesop: line 478:  1514 Aborted                 /bin/runrecovery.sh
Serial Number:
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: cli_server.sh
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: SQL_startup.sh
STARTED: dwnldr_startup.sh
STARTED: HTTP_startup.sh
STARTED: probe
STARTED: superthread_startup.sh
STARTED: ${ROOT}/usr/bin/products/herbie/herbie_startup.sh
STARTED: /usr/wfavvid/run-wfengine.sh
STARTED: /usr/bin/launch_ums.sh
Waiting 5 ...Buffer I/O error on device hda1, logical block 70429
Waiting 6 ...hda: no DRQ after issuing MULTWRITE
hda: drive not ready for command
Buffer I/O error on device hda1, logical block 2926
Buffer I/O error on device hda1, logical block 2927
Buffer I/O error on device hda1, logical block 2928
Buffer I/O error on device hda1, logical block 2929
Buffer I/O error on device hda1, logical block 2930
Buffer I/O error on device hda1, logical block 2931
Buffer I/O error on device hda1, logical block 2932
Buffer I/O error on device hda1, logical block 2933
Buffer I/O error on device hda1, logical block 2934
REISERFS: abort (device hda1): Journal write error in flush_commit_list
REISERFS: Aborting journal for filesystem on hda1
Jun 17 16:36:11 localhost kernel: REISERFS: abort (device hda1): Journal write error in flush_commit_list
Jun 17 16:36:11 localhost kernel: REISERFS: Aborting journal for filesystem on hda1
Waiting 8 ...MONITOR EXITING...
SAVE TRACE BUFFER
Jun 17 16:36:13 localhost err_handler:   CRASH appsServices startup startup.sh System has crashed. The trace buffer information is stored in the file "atrace_save.log". You can upload the file using "copy log" command
/bin/startup.sh: line 262: /usr/bin/atr_buf_save: Input/output error
Waiting 9 ...Buffer I/O error on device hda1, logical block 172794
INIT: Sending processes the TERM signal
INIT: cannot execute "/etc/rc.d/rc.reboot"
INIT: no more processes left in this runlevel

The flash card for CUE might be corrupt. Try and reinstall CUE and restore from backup to see if that fixes it. If it doesnt, try a different flash card.
Cole

Similar Messages

  • SAN Configuration Error: Buffer I/O error on device sdd, logical block 0

    hi,
    I had successfully to configured dm-multipath.. now i can see the mapped device as
    # ll /dev/mapper
    crw------- 1 root root 10, 61 Nov 19 18:59 control
    brw-rw---- 1 root disk 253, 0 Nov 19 20:00 ovs
    ovs is an alias for /dev/sdc which is the active path of the storage Lun , but the passive path /dev/sdd is still existing and it giving error at the boot of OVM Server
    end_request: I/O error, dev sdd, sector 0
    Buffer I/O error on device sdd, logical block 0
    end_request: I/O error, dev sdd, sector 0
    Buffer I/O error on device sdd, logical block 0
    end_request: I/O error, dev sdd, sector 0
    Buffer I/O error on device sdd, logical block 0
    i can't understand why the system is still looking for the passive path /dev/sdd even after multipath was configured ????
    did anybody faced this kind of problem then please help me..
    Thanks in Advance

    Raja Gounder wrote:
    I had successfully to configured dm-multipath.. now i can see the mapped device asYou haven't configured it correctly, otherwise you wouldn't have a friendly name configured. Oracle VM requires WWIDs in /dev/mapper to make the device available.

  • Buffer I/O error on device sdd1, logical block, HDD failure? [SOLVED]

    Hello!
    I'm a bit puzzled here to be honest. Granted i'm not using linux as much as I used to (not after windows 7). I have archlinux running on my HTPC. Never had any issues before that was this severe, unless I upgraded and forgot to read news section. Booted the htpc today to be greeted by "Buffer I/O error on device sdd1, logical block" with a massive wall of text, a few seconds later "welcome to emergency mode."
    *This is NOT hdd where the linux kernel is residing on. What logical purpose would it serve for the kernel/userspace to abort everything just because fsck fails or something? If this was indeed my linux partition I would fully understand.
    Anyways, I used parted magic, ran fsck, smart. Sure enough fsck warned me about bad/missing superblock. Restored the superblock by using e2fsck. I had over 10 000 "incorrect size" chunks. Ran 2-3 SMART after that. fsck says okay, smart gives a 100% status report with no errors.
    Oh yeah, I have turned off FSCK completly in my fstab, thinking about at least turning it on my bigger hdds
    Questions:
    *Is SMART reliable? If it says it's alright, does that mean i'm safe? Would physical broken sectors turn up by SMART?
    *I know SMART warns the user in windows 7 if hdd failure is imment. Is this possible within linux as well? Since i'm NOT using a GUI, is this possible to send through a terminal/email?
    *Sometimes the HTPC have been forefully shut down (power breakage), could this be one of the causes of the I/O error?
    As always, thank you for your support.
    Last edited by greenfish (2013-10-23 13:23:21)

    graysky wrote:Any reallocated sectors in smartmontools?  If you run 'e2fsck -fv /dev/sdd1' does it complete wo/ errors?  Probably best to repeat for all linux partitions on that disk.
    Sorry for the late reply guys. Been busy with my other hdd that decided to screw with me. e2fsck first complained about bad sectors, and wrong size. Now it says all clean. I've decided to remove this HDD from server and mark it "damaged".
    Thank you again for your help
    alphaniner wrote:
    greenfish wrote:*Is SMART reliable? If it says it's alright, does that mean i'm safe? Would physical broken sectors turn up by SMART?
    *I know SMART warns the user in windows 7 if hdd failure is imment. Is this possible within linux as well? Since i'm NOT using a GUI, is this possible to send through a terminal/email?
    1) Don't trust the 'SMART overall-health self-assessment test result', run the diagnostics (short, long, conveyance, offline). The short and conveyance tests are quick so start with them. If they both pass run the long test. The offline test is supposed to update SMART attributes, but it generally takes longer than the long test, so save it for last if at all. Usually when I see bad drives the short or long tests pick them up.
    2) Look into smartd.service.
    greenfish wrote:What logical purpose would it serve for the kernel/userspace to abort everything just because fsck fails or something?
    Systemd craps itself if an fs configured to mount during boot can't be mounted, even if the fs isn't necessary for the system to boot. Rot sure about how it handles fsck failures. This 'feature' can be disabled by putting nofail in the fstab options. I add it to every non-essential automounting fs.
    Thank you for the useful information. I will save this post for future references.
    Will deff look into smartd.service, especially when I have so much data running 24/7.
    Will also update my fstab table with "nofail" like you suggested
    Thank You!

  • Ubuntu Installation: buffer I/O error on device sda, logical block 2

    Hallo
    ich habe einen LAPTOP Levono G700. Er hatte Windows 8 und EFI darauf. Es war mir gelungen Unbuntu 12.04 (64) zu installieren. Nach einiger Zeit häuften sich die Lese-Fehler, bis schließlich Ubuntu nicht mehr lief. Beim Versuch, Ubuntu neu aufzuspielen habe ich wohl versehentlich die Festplatte ganz platt gemacht.
    Es ist mir gelungen Windows 7 neu aufzuspielen. Es läuft fehlerfrei. Beim Versuch, Ubuntu erneut zu installieren, bricht die Installation immer mit dem Fehler "buffer I/O error on device sda, local block 2" ab. Was bedeutet dies? Läßt sich Ubuntu nicht installieren oder ist die Festplatte kaputt?
    Danke für jede Hilfe
    Harry

    The flash card for CUE might be corrupt. Try and reinstall CUE and restore from backup to see if that fixes it. If it doesnt, try a different flash card.
    Cole

  • Buffer I/O error on device sr0, logical block 160512

    I get this error whenever I try to boot up uzume linux.  I know that the ,iso isn't currupted in any way, I've tried to boot the cd in several different machines, burnt it in different burners, done everything I could think of.  So i'm stumped as to what is even causing it.  Any ideas?

    I burn't it on a mac with disk utility as well, and disk utility hasn't failed me yet (never had an unsuccessful burn in over a year).  I rebuilt the .iso several times, but to no avail.  The .iso works fine in Virtual Box, so the problem isn't there.  I started having the problems after the new archiso-git update, I think...

  • Sles9  sp2   scsi error  internal  target failure  buffer I/O error

    Apr 3 10:40:41 hostname kernel: SCSI error : <2 0 0 0> return code = 0x10000
    Apr 3 10:40:41 hostname kernel: end_request: I/O error, dev sdb, sector 24047
    Apr 3 10:40:41 hostname kernel: Buffer I/O error on device sdb1, logical block 2998
    Apr 3 10:40:41 hostname kernel: lost page write due to I/O error on sdb1
    can any one tell me what happened ? i had checked the disk
    had no medium error. after remount , it goes well. but this will happen again.

    961262 wrote:
    The used tables:
    Table 1: 312 col, 12,248 MB, 11,138,561 rows, avg len 621 bytes
    Table 2: 159 col, 4288 MB, 5,441,171 rows, avg len 529 bytes
    Table 3: 118 col, 360MB, 820,259 rows, avg len 266 bytes
    The FTS has improved as expected. With 5 physical drives in a RAID0, a performance of
    420MB/s was achieved.
    In the write test on the other hand we were not able to archieve any improvement.
    The CTAS statement always works with about 5000 - 6000 BLOCK/s (80MB/s)
    But when we tried running several CTAS statements in different sessions, the overall speed increased as expected.
    Further tests showed that the write speed seems to depend also on the number of columns. 80MB/s were only
    possible with Tables 2 and 3. With Table 1, however only 30MB/s were measured.
    If multiple CTAS can produce higher throughput on writes this tells you that it is the production of the data that is the limit, not the writing. Notice in your example that nearly 75% of the time of the CTAS as CPU, not I/O.
    The thing about number of columns is that table 1 has exceeded the critical 254 limit - this means Oracle has chained all the rows internally into two pieces; this introduces lots of extra CPU-intensive operations (consistent gets, table access by rowid, heap block compress) so that the CPU time could have gone up significantly, resulting in a lower throughput that you are interpreting as a write problem.
    One other thought - if you are currently doing CTAS by "create as select from {real SAP table}" there may be other side effects that you're not going to see. I would do "create test clone of real SAP table", then "create as select from clone" to try and eliminate any such anomalies.
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    Author: <b><em>Oracle Core</em></b>

  • Buffer I/O error on my cdrom

    Hello, I just installed Arch Linux using the 0.8 beta 1 install CD, but when I start ripping CDs by abcde in Arch I got following message:
    Couldn't disable kernel command translation layer
    Here is a output of cdparanoia:
    [alex@myhost ~]$ cdparanoia -vsQ
    cdparanoia III release 9.8 (March 23, 2001)
    (C) 2001 Monty <[email protected]> and Xiphophorus
    Report bugs to [email protected]
    http://www.xiph.org/paranoia/
    Checking /dev/cdrom for cdrom...
    Testing /dev/cdrom for cooked ioctl() interface
    /dev/sr0 is not a cooked ioctl CDROM.
    Testing /dev/cdrom for SCSI interface
    generic device: /dev/sg2
    ioctl device: /dev/sr0
    Found an accessible SCSI CDROM drive.
    Looking at revision of the SG interface in use...
    SG interface version 3.5.34; OK.
    CDROM model sensed sensed: HL-DT-ST DVDRAM GSA-4167B DL13
    Checking for SCSI emulation...
    Drive is ATAPI (using SCSI host adaptor emulation)
    Couldn't disable kernel command translation layer
    Although abcde shows this message when ripping CDs, it can still rip the CDs without problem.
    But I haven't got this message in Gentoo or Ubuntu, is there anyway to fix this?
    Many thanks!
    Last edited by renwklo (2007-02-07 10:13:07)

    Also when I booting the machine I got these error message:
    [root@myhost alex]# cat /var/log/errors.log
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 1
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 2
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 3
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 4
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 5
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 6
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 7
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 8
    Feb 6 00:04:45 myhost Buffer I/O error on device sr0, logical block 9
    Feb 6 02:03:03 myhost kdm[2501]: Unable to fire up local display :0; disabling.
    Feb 6 02:03:04 myhost dhcpcd[2426]: terminating on signal 15
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:14:00 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 02:16:08 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 03:23:19 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 13:54:43 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 1
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 2
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 3
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 0
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 1
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 2
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 3
    Feb 6 15:10:28 myhost Buffer I/O error on device sr0, logical block 0
    Feb 7 04:41:08 myhost kdm[2516]: Unable to fire up local display :0; disabling.
    Feb 7 04:41:09 myhost dhcpcd[2422]: terminating on signal 15
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354579
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580
    Feb 7 05:16:09 myhost Buffer I/O error on device sr0, logical block 354580

  • Buffer I/O error

    error receive on oracle vm server
    Buffer I/O error on device dm-2, Logical bock 195825888
    printk: 179 messages suppressed
    Can any have idea pleases

    The storage we are using is ISCSI SAN...although its working fine past 3 months , but this error came last 4 days don't know why...
    block which i had created was dm-0 no error in this block , when i run cat/proc/partions below output occur
    in which dm-1,dm-2,dm-3 error shows in these block ,
    8 16 1000000000 sdb
    8 32 1000000000 sdc
    8 48 1000000000 sdd
    8 64 97656240 sde
    8 65 1 sde1
    8 69 97643038 sde5
    8 96 97656240 sdg
    8 97 1 sdg1
    8 101 97643038 sdg5
    8 80 97656240 sdf
    8 81 1 sdf1
    8 85 97643038 sdf5
    8 112 97656240 sdh
    8 113 1 sdh1
    8 117 97643038 sdh5
    253 0 1000000000 dm-0
    253 1 97656240 dm-1
    253 2 97643038 dm-2
    7 0 2926562 loop0
    7 1 67108864 loop1
    7 10 67108864 loop10
    7 11 67108864 loop11
    7 100 609884 loop100
    7 101 67108864 loop101
    7 102 609884 loop102
    7 103 20971520 loop103
    7 104 2926562 loop104
    7 105 67108864 loop105
    7 106 67108864 loop106
    7 107 2926562 loop107
    7 109 67108864 loop109
    7 110 609884 loop110
    7 111 20971520 loop111
    7 112 609884 loop112
    253 3 97656240 dm-3
    Edited by: 800476 on Nov 29, 2011 2:57 AM

  • I am trying to use 2 MOTU 896's as an aggregate device in Logic Pro 8

    I am using Logic Pro 8 on a Macbook Pro OS 10.6.8.  I am trying to use 2 MOTU 896's as an aggregate device to have total of 16 inputs.  I am daisy chaining the 896's via firewire.  I can select channels 1-16 as inputs in Logic.  I am getting signal input in channels 1-8 in Logic.  However, I am getting no signal input in channels 9-16.  I've also tried using ADAT light pipe as output from the 2nd device to the 1st one and that didn't work either.  I have created the aggregate device under audio-midi setups and I've set the 1st 896's clock source to internal and the 2nd 896's clock source as the 1st 896.  I've also tried both 896's clock source as internal.  Has anyone had any success in using 2 896's as an aggregate device in Logic Pro 8?  I need to use this setup to record a large band.  I would greatly appreciate any tips that anyone has.  Thanks.

    David,
    Learning is not a bad thing, I'm just saying what you thought MIDI did is in error, you're not the first.
    Here's an article explaining what MIDI is and how it works, it probably seems less than you thought it capable of but the fact is, since it's standardization in 1983 it completely revolutionized electronic music. By the Way, the designers of the Prophet 8 (Dave Smith & Sequential Circuits) had a lot of input into the MIDI protocol, in fact, if you had to say one company/person came up with the basics of MIDI it was Sequential Circuits. They also came up with the first polyphonic, fully programmable analog synth. I had a very basic MIDI studio at the end of 1984.
    http://entertainment.howstuffworks.com/midi1.htm

  • OBIEE 10g iBots SA System error : No Devices found for User ###

    Hi All,
    I have implemented SA System in my RPD as I wanted to send emails to obi/non-obi users.
    But its giving error - No Devices found for User ....
    I found this error in S_NQ_ERR_MSG table.
    I have an entry in SA_User table, and when I login to OBI using same user, I can see my delivery profile automatically set as expected because of SA System Implementation.
    But its not working when I want to send mail to same user using iBots conditional request.
    Please advise what I am doing wrong here??
    Thanks in Advance !!..
    Well .. now the No devices issue is resolved if i select the checkbox for Interactive Dashboard and Active Delivery Profile in the Destination tab of iBot.
    But still No mail received :(
    Getting below data from S_NQ_ERR_MSG table.
    ERROR_MSG_TEXT
    1:6:Device16:/shared/_ibots/19:6045043489:6045043489:dashboard7:ibotapi6:9719.0:_:
    2:6:Device16:/shared/_ibots/19:6058035879:6058035879:dashboard7:ibotapi6:9719.0:_:
    Please help !!!
    Edited by: 995726 on Apr 11, 2013 7:04 AM

    Solved !!! :)
    Its was a small mistake..
    The SA System columns in Presentation and logical area should be exactly as expected.
    In my case, the correct column should be 'Time Zone' but I had it as 'Timezone'. :)
    Small mistakes are hard to find... neways.. hope this will help some another soul ;)
    Cheersss !!!

  • Hostapd `EAPOL TX: no buffer space available' error

    Hi guys, I have just configured hostapd with NAT to let my smart phone use wired network. At first, it worked normally. But recently I found that sometimes, the connection between the AP and my phone seemed to fail after some time, especially when there are some other devices connecting my AP. Here 'fail' means no packets can be transfered between the two devices and any new device cannot establish a connection with the AP. It seems that at that time, my wireless device only broadcast an SSID, and when I look at the terminal, there are nothing uncommon except some `nl80211: EAPOL TX: no buffer space available' errors. When I tried to let my AP work again, I found that seemingly any actions, except restarting my laptop, does not work. I tried googling, but no luck.
    My /etc/hostapd/hostapd.conf file:
    interface=wlan0
    bridge=br0
    driver=nl80211
    logger_syslog=-1
    logger_syslog_level=2
    logger_stdout=-1
    logger_stdout_level=2
    dump_file=/tmp/hostapd.dump
    ctrl_interface=/var/run/hostapd
    ctrl_interface_group=0
    ssid=[ssid]
    hw_mode=g
    channel=7
    beacon_int=100
    dtim_period=2
    max_num_sta=5
    rts_threshold=2347
    fragm_threshold=2346
    macaddr_acl=0
    auth_algs=3
    ignore_broadcast_ssid=0
    wmm_enabled=1
    wmm_ac_bk_cwmin=4
    wmm_ac_bk_cwmax=10
    wmm_ac_bk_aifs=7
    wmm_ac_bk_txop_limit=0
    wmm_ac_bk_acm=0
    wmm_ac_be_aifs=3
    wmm_ac_be_cwmin=4
    wmm_ac_be_cwmax=10
    wmm_ac_be_txop_limit=0
    wmm_ac_be_acm=0
    wmm_ac_vi_aifs=2
    wmm_ac_vi_cwmin=3
    wmm_ac_vi_cwmax=4
    wmm_ac_vi_txop_limit=94
    wmm_ac_vi_acm=0
    wmm_ac_vo_aifs=2
    wmm_ac_vo_cwmin=2
    wmm_ac_vo_cwmax=3
    wmm_ac_vo_txop_limit=47
    wmm_ac_vo_acm=0
    eapol_key_index_workaround=0
    eap_server=0
    own_ip_addr=127.0.0.1
    wpa=2
    wpa_passphrase=[secret phrase]
    wpa_key_mgmt=WPA-PSK
    rsn_pairwise=CCMP
    wpa_ptk_rekey=600
    Please help me. At least let me know meaning and cause of the error message.

    Bonjour,
    Toutd'abord merci de votre réponse!
    A première vu mes fichiers sont bien fermé après écriture, faudrait que je fasse un étude plus approfondie pour en être sûre à 100% mais si le problème viendrait de là je pense que mon erreur arriverait plus souvent que toute les 1 à deux semaine, en effet ma base de donnée tourne en permanence 24/24 7/7 en service sur windows pour recevoir les données provenant du moteur (les données sont stocké dans un mémoire cyclique dans la base de donnée). Je vais consulter plusieur fois mes données par jours en me connectant à ma base de donnée avec mon programme et ensuite je me deconnecte de la base de donnée quand j'ai vu ce que je voulais voir! Et ce plusieur fois par jour!! Mais certaine fois (toute les 1 à 2 semaines) je ne peux plus me connceter à cette base de donnée car j'ai cette erreur 10055 qui apparait, je dois donc redémarrer la base de donnée et le problème est résolu pour un certain temps à nouveau!
    Cordialement
    Sébastien Kuenlin

  • I/o Error Result -36 in Logic 7.2.3

    Hi Guys - Forum newbie here and need a bit of help please
    Working on a logic song that needs to be handed in for coursework but have the following error while trying to save the song and even bounce.
    i/o Error result -36
    The funny thing is that it does save. The ball spins for about 30 seconds then error pops up on screen. It however doesnt bounce and that will stop me from handing in the work
    It is only with this song as i have opened a new song and saves/bounces no problem
    I have updated firmware for M-Audio device, trashed logic preferences and all other elements suggested that I have found on forums but no luck. The i/o error -35 for symbols that should be not used does not apply here as I only have a single letter as my song name
    Any help will be appreciated
    kind regards
    Qiuinton
    G5 PowerPC   Mac OS X (10.4.8)   Logic 7.2.3, M-Audio 410 Audio interface
    G5 PowerPC   Mac OS X (10.4.8)   Logic 7.2.3, M-Audio 410 Audio interface

    My lacie external harddrive had an issue with a specific file
    omg.. a problem with a lacie drive?? I'm in shock..
    Question, should there not maybe be a folder in the main forum page when
    we can list the different general error's like -36 and inside of that let forums > members insert the different solutions as they happen. This way the member > can go staight there first. Just a thought
    good idea. or if not at the forum, there could at least be a link or downloadable pdf or whatever at the logic support site that covers all of the error messages with accurate and useful descriptions of them all, and a list of possible real-life causes and fixes. that would save a lot of time wasted at this forum trying to get to the bottom of this stuff. I haven't looked at the logic support page for a while, maybe something like that is already there... wishful thinking..

  • Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • Error publishing from Muse - "error updating device redirect setting"

    After recent upgrade of Muse I am getting an error message when publishing. The pages are published correctly but there is an error which prevents the final completion of the process. message = "Error updating device redirect settings click resume to try again." it never works. What is up? is this a Business Catalyst error or a a Muse error?

    I turned off the firewall, logged out from Creative Cloud and restarted my computer. After rebooting, I logged in to Creative Cloud, open Muse and connect to Business Catalyst without no problem,

  • Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

    Error message  " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

    Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
    I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
    I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
    Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
    Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
    Thanks!

Maybe you are looking for