Buffer Sizes Are Not Equal

Okay what does this term mean:
Buffer Sizes Are Not Equal
I am playing with transitions. I have two clips with enough handles.
I'm using the gradient wipe and putting a Photoshop file in the "well".
That message pops up in the timeline when I'm stopped at that place in the timeline (similar to the media offline message). When I try to render the effect, the same message appears and doesn't even attempt to render.
FCP 5.1.4

The image is RGB...
The image itself is a blue circle over a transparent background. That's the only layer.
I did change it to a jpg file, and I stopped getting the error message...but obviously I also lost the alpha channel.
John

Similar Messages

Margins are not equal.

I am on my third Xerox. This one is a refurb 8560. It produces really nice color and all that.But it does not center the margins on the pictures I've printed.Margin errors occur in both Tray 1 and Tray 2.I set the canvas to 5 X7 and the item to a lesser size.But both the top and side margins are not equal.The same thing happens with larger paper (8.5x11) in Tray 2.My previous Xerox which was a Laser with toner never had that problem.I'm using Photoshop CS5.I'd appreciate any advice.Thanks.

I did do the firmware upgrade.I realized that the answer to the margins, at least for simple things, is not to create margins in PhotoShop. If I just make the picture the size I want it centers fine. I do have another question.Assume I print a picture on Xerox Glossy paper and have it framed behind glass.A picture on Epson Glossy printed with an Epson Ink Jet claims 200 years.But I haven't seen the equivalent for any Xerox. I spoke to someone at Xerox some years ago when I had a color laser and I was told that there were too many kinds of paper that could be used. So they did not test it. I have a high end Epson but it is a pain to use and it is slow. I find using the Xerox printers are faster and I don't have to deal with icc profiles.

Bug: Temp files with 0-Byte size are not removed after PDF export

Post Author: chaplin
CA Forum: Exporting
When exporting to PDF through the CR-API (CRPE) the temporary files epfHHHH.tmp and ctmHHHH.tmp in the windows temporary path (with HHHH = hexadecimal number with 4 digits) are not deleted when they are 0-Byte in size - even after closing the application which called the CRPE-API. When HHHH reaches its limit (hex FFFF = dec 65535) the Crystal Reports DLLs are not able to create more PDFs - the export aborts with an error and the PDFs are 0-Byte in size.
This behaviour was tested/reproduced with Crystal Reports 8.5, but (as many other long-term bugs) might be also exist in later releases of Crystal Reports as well as on the other SDK interfaces.
KBase Article ID:2009412, Track ID: ADAPT00011016 and Escalation ID: 1472 describes a solution for this problem and Business Objects says that using Crxf_pdf.dll, version 8.6.0.108, dated 04/25/2002 or later solves the problem. We are using a newer one from 2003 (version 8.6.2.429) and still see this problem. It seems that 0-Byte-Files are ommitted from the deletion.
Does anybody know a workaround or solution for this bug?

Wendell,
This forum is for handling issues migrating from non-Oracle databases to Oracle databases.
As this is an Oracle to Oracle issue using SQL*Developer export it would be better to open a new thread in the SQL*Developer forum -
SQL Developer
There will be more people there who can help with this problem.
Regards,
Mike
Edited by: mkirtley on May 14, 2010 10:16 AM

MCHBH and MARDH tables are not equal

Hi,
We were trying to find periodic stock for batches, while we realise that MCHBH table total batch stock and MARDH total stock is not equal for an example of a material. Is that can be possible?
Which table or bapi function is right for periodic batch stock ?
Regards&Thanks,
Begü

S0001377806 wrote:
>
What movement types were used for this material and batch?
-> many different movement types, GR/GI...
this answer does not help, as it is movement type specific whether SAP creates a batch number or a posts to a storage location. Without knowing the movement types that you used, I cannot really tell you why SAP updates the tables differently.
you have to get deep knowledge on the movement types that are used in your company to make analysis like this one.
Especially due to the fact that you are saying that it happens to many many materials, I do really think it is not an error in the SAP programs, it is more a misunderstanding on SAP processes, especially how the history tables are updated.
Kunal gave you already the OSS note 193554. it explains the logic how SAP writes history records.
SAP uses function modules to get the values from the previous period (which ones are explained in OSS note 415349)
Thanks, this was actually the answer I was looking for
I will look into movement type specific programming/customization.
Edited by: Sebastian Stöckle on Nov 22, 2010 11:48 AM
Edited by: Sebastian Stöckle on Nov 22, 2010 11:49 AM

HOW TO BLOCK DELIVERY OF GOODS WHICH ARE NOT EQUAL TO SALES ORDER

Hi,
I want to block user to create any sales invoice for some customers based on sales order where quantity in sales order is not equal to invoice.
Thanks,
Anitha

Hi Anitha,
You can do this by selecting check marks on two field under BP Master data >>Payment Terms
1) Allow Partial Delivery of Sales Order
2) Allow Partial Delivery per row.
Thanks,
Regards,
Sudhir

Idocs are not equal to XML message generated

hi ,
i am facing problem when i using XI.its not generated idocs equal to XML message generated.

idocs equal to XML message
Do u mean that in ur file to idoc scenario, the no of messages sent by file is not equal to no of idocs generated? If yes, then first check in tcode sxmb_moni at XI for presence of message and check for error there
Please describe ur scenario a bit.
Regards,
Prateek

Website picture sizes are not being cached when I click on their properties

Since updating to Firefox 18 on my wife's laptop when she clicks on "View image info" the size is shown as "unknown (not cached)". When I try on my desktop the Kb of pictures are showing up as normal. The only difference between the two is the desktop is 32 bit and the laptop is 64 bit.

Is the cache enabled and working on that computer if you check that on the <b>about:cache</b> page?
Also make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing

LMS3.0.1 Log files' size are not purged.

There is a LMS 3.0.1.
Every day size of all log files only are increased.
I have a 12G particion for log files but it's full every 2 weeks.
In this case I have to stop LMS, delete all log files and start LMS manually every two weeks.
Also, there is following message:
CiscoWorks Folder Utilization is 8%Processes DFMCTMStartup, DataPurge are down.
I tried to start these services several times but it failed all time.
Hot to make LMS to prevent of increasing of log files over Recommended Size Limit?

These two processes should be done in normal operation. Do not try and start them manually.
To rotate log files periodically, you will need to configure logrot. Search the Common Services online help for "logrot", and you will get the instructions for configuring it. Essentially, you will need to run NMSROOT/bin/perl NMSROOT/bin/logrot.pl -c, then walk through the menu prompts to configure the files you want to rotate.

Div auto size are not matching

I have to div tags that are right next to one another. I need one to be set to auto size so it can grow and shrink with the results of the search. The one to the left of it, the navigation, is set at a min height of 600px. That works great until the search exceeds 600px and grows. The user is left with a gap due to the navigation height being set to a strict 600px. I need a way to "connect" both of these div tags so when one grows the other does as well, with a min set at like 600px. Thanks for your help! Also, as a side note... in google Chrome I get white space after the search.... and not just a little... like 600px worth .. im not too worried about it since it is only in Chrome, but if anyone has any thoughts on that, that would be great! Thanks!
website can be found at:
http://web.ics.purdue.edu/~smith50/vcs/home.html
CSS code for both DIV tags:
#searchcontent {
float: left;
width: 820px;
background-color: #FFF;
padding-left: 15px;
padding-right: 15px;
min-height:600px;
height:auto !important; height:600px;
#nav {
float: left;
width: 150px;
padding-top: 0px;
padding-left: 0px;
background-color: #EEE;
min-height:600px;
height:auto !important; height:600px;

Divs don't really work like table columns. What I would do is use a technique called "faux columns". Basically you have a container div with a background image that makes it look like there's two columns. This background image can be pretty short - 800px wide (or whatever desired width) by at least two pixels tall as some versions of IE have issues with 1-pixel high images. You then repeat this image down the y axis using the CSS background-repeat. Your sidebar and serach divs will fit inside the container div. As the content expands in height, the divs inside the container div will expand vertically and everything will be hunky-dory.

Serious keynote notes bug - notes font colour and size are not adjustable on master slides

I would like as many people as possible who are frustrated with this issue to comment on this post. Perhaps together we can demand an update that addresses this serious problem with Keynote.
The problem: You are unable to change the font type, colour or size of presenter notes. You can do it if you go into each individual slide, or if you hack into the program and edit the code, but you can't as a user change all the notes at once. This is ridiculous. Everyone should avoid Keynote and buy PowerPoint until this is fixed.
When you go to slide master and try to adjust the font size, colour and type in Keynote it is greyed out. This is the grey of bad programming.
This is a complete joke. It needs to be fixed and it needs to be addressed in the next Keynote update. How was this version released without this being detected?
When are you going to fix it Apple iWork developers? The software is unusable for most of us until you do.

First of all, I am not frustrated with this as I don't use presenter notes. Second, this forum is for users, not Apple developers. Have you provided feedback to Apple through their website? You will get a lot further doing that then complaining to other users here.

The registry setting ProfileImagePath and CentralProfile are not equal

Hi!
I have a user that logs on to a Citrix published desktop on a 2008 R2 server and gets a TEMP profile created. This again leads to no profile creation in our centrally profile store on a fileserver, which we have configured this to point to With a GPO.
I see when I look at the profile key in the registry for this user that
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\SID\CentralProfile points to our fileserver, and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\SID\ProfileImagePath Points to C:\Users\TEMP.
I am curious to know where I can find the reason for the ProfileImagePath pointing to C:\Users\TEMP.
I know that it should point to C:\Users\%username% for the profile to be created on our Central profile location...
Freddy

A user gets a temporary profile when an error stops the users profile from loading. (I am assuming you are using Windows to manage your roaming profiles and not Citrix User Profile Manager.)
I would search for the account name in the Application Event Log and try to identify the reason they get a temporary profile.
If you want to try and fix it you could just try changing ProfileImagePath to the correct value or delete the users entire profile and roaming profile. Steps below.
The user will loose any settings saved in their profile
With the account logged off…
Delete C:Users\TEMP
Delete C:\Users\%username%\
Delete their profile from the roaming profile share.
Delete the entire SID for this user key from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\
If this happens to the same user again, I would check permissions on the C:\Users and the roaming profile share for this user. Again the Event Log is your best bet if the problem re-occurs.
Thanks,
Jeremy

Error: columns are not equal when writeback data from Essbase to Oracle

I got an error when writeback Budget data from Essbase to Oracle that: The number of columns returned by script [14] is less than the source data columns exposed [15] while my returned columns from script is 15
My report script:
<Sym
{MISSINGTEXT ""}
{ SUPMISSINGROWS }
//{SUPPAGEHEADING}
{SUPBRACKETS}
{SUPFEED}
{SUPCOMMAS}
{ TABDELIMIT }
{ NAMESON }
{ ROWREPEAT }
{ NOINDENTGEN }
{DECIMAL 0}
//<COLUMN ("Version")
<ROW ("Account","Sector","Resident / Non-Resident","HSP_Rates","Year","Profit_Center","Period","SubAccount","Currency","Branch","Scenario","Elements","Spare","Version")
<IDESCENDANTS "Account"
"S_NA"
"R_0"
"HSP_InputValue"
"FY11"
"Jan" "Feb" "Mar" "Apr" "May""Jun" "Jul" "Aug" "Sep" "Oct" "Nov" "Dec"
<IDESCENDANTS "Profit_Center"
"T_00"
"Local"
"P_682"
"B_01"
"Budget"
"Amount"
"E_0000"
"Approved"
*

the solution to uncomment -> //{SUPPAGEHEADING}

Doing Buffered Event count by using Count Buffered Edges.vi, what is the max buffer size allowed?

I'm currently using Count Buffered Edges.vi to do Buffered Event count with the following settings,
Source : Internal timebase, 100Khz, 10usec for each count
gate : use the function generator to send in a 50Hz signal(for testing purpose only). Period of 0.02sec
the max internal buffer size that i can allocate is only about 100~300. Whenever i change both the internal buffer size and counts to read to a higher value, this vi don't seem to function well. I need to have a buffer size of at least 2000.
1. is it possible to have a buffer size of 2000? what is the problem causing the wrong counter value?
2. also note that the size of max internal buffer varies w
ith the frequency of signal sent to the gate, why is this so? eg: buffer size get smaller as frequency decrease.
3. i'll get funny response and counter value when both the internal buffer size and counts to read are not set to the same. Why is this so? is it a must to set both value the same?
thks and best regards
lyn

Hi,
I have tried the same example, and used a 100Hz signal on the gate. I increased the buffer size to 2000 and I did not get any errors. The buffer size does not get smaller when increasing the frequency of the gate signal; simply, the number of counts gets smaller when the gate frequency becomes larger. The buffer size must be able to contain the number of counts you want to read, otherwise, the VI might not function correctly.
Regards,
RamziH.

Compressed String (GZIPOutputStream) is not equal to the source string

Hello,
I would like to compress the contents of a String (XML data) with the GZIPOutput/InputStream classes. Unfortunately I'm facing a problem - my source and result strings do not equal after the compression and decompression (I hope this is the correct sub-forum for this kind of question).
Here is a example code that reads data from a file (test.xml), compresses it via a GZIPOutputStream into compressed byte array and decompresses it back into a String:
public class CompressedStringTest {
     private static final String     FILENAME     = "test.xml";
     public CompressedStringTest() throws IOException {
          File file = new File( FILENAME );
          String xml = FileUtil.readFile( file );
          // COMPRESS
          ByteArrayOutputStream out = new ByteArrayOutputStream();
          GZIPOutputStream zipout = new GZIPOutputStream( out );
          zipout.write( xml.getBytes() );
          zipout.close();
          out.close();
          // DECOMPRESS
          byte[] result = new byte[ xml.getBytes().length ];
          ByteArrayInputStream in = new ByteArrayInputStream( out.toByteArray() );
          GZIPInputStream zipin = new GZIPInputStream( in );
          zipin.read( result );
          zipin.close();
          in.close();
          String xml2 = new String( result );
          System.out.println( "xml.equals( xml2 ): " + xml.equals( xml2 ) );
     public static void main( String[] args ) throws IOException {
          new CompressedStringTest();
}The length of the source and result strings are the same, but they are not equal. When I print out the lines which do not equal, I get this:
'</sysConfig>'
'</sxxxxxxxxx'where "x" are those small boxes, characters that can't be printed.
This is the source XML file I use:
<?xml version="1.0" encoding="UTF-8"?>
<sysConfig xid="0" version="0.1" id="1" xmlns:r2="http://....">
    <addresses class="java.util.ArrayList" xid="1">
        <address xid="2" id="1">
            <config xref="0"/>
            <addressType xid="3">NURSING_SERVICE</addressType>
            <externalId xid="4">0</externalId>
            <name xid="5">This is the name containing fourtyeight chars!!!</name>
            <street xid="6">street</street>
            <city xid="7">city</city>
            <zip xid="8">zip</zip>
            <telephone xid="9">12345</telephone>
            <fax xid="10">(123) 12345612345454597745</fax>
        </address>
     </addresses>
    <lastModified class="java.util.GregorianCalendar" xid="8167">2009-09-17 10:38:59.0 MESZ</lastModified>
    <customerNr xid="8168">FB-IK-01001</customerNr>
    <customerName xid="8169">A Customer</customerName>
    <logProtocolChanges>false</logProtocolChanges>
    <useHomeAsStartAddress>false</useHomeAsStartAddress>
    <sendMailEnabled>false</sendMailEnabled>
    <sendFaxEnabled>true</sendFaxEnabled>
</sysConfig>When I remove just one arbitrary line, the source and result strings do equal. This may have to do with some kind of buffer-length-problem, but I just can't figure out where the problem is.
I really appreciate your help
Thanks a lot!

The javadoc reads for "FilterInputStream.read(byte[] b)":I've read it. You're the one who needs to read it.
Reads up to* byte.length bytes of data from this input stream into an array of bytesSo I thought it just reads all available data.Why? That's not what it says, is it?
But when I print the return code of "read", it is not -1, meaning not the whole data has been read.If that is supposed to be 'meaning that the whole data has been read', you are mistaken. What was the return value? compared to the buffer length? You might find it interesting ...
I assume I just do not understand the read method completely.The return value is -1 for EOS, otherwise the number of bytes that were read. Just like it says in the Javadoc actually.
You have to use a loop, increment the offset, etc.

Succession of TaskSelectionEvent.getTaskIds is not equal to user selection

Dear all,
My configuration is JDev 11g R1 (11.1.1.4.0) and I'm currently working at ADF DVT Project Gantts.
At the moment a problem occurs within the TaskSelectionEvent: The order of the task Ids coming back from TaskSelectionEvent.getTaskIds are not equal to the order of my selection. I 'm selecting first task A and then task B. The method give back [B, A].
The code snippets based on the Oracle ADF faces demo:
JSP:
<dvt:projectGantt id="mygantt" startTime="2008-01-01"
endTime="2011-12-31" var="task"
value="#{PG.model}"
tooltipKeys="#{PG.tooltipKeys}"
tooltipKeyLabels="#{PG.tooltipLabels}"
dataChangeListener="#{PG.handleDataChanged}"
actionListener="#{PG.handleAction}"
partialTriggers="ctb2"
taskSelectionListener="{PG.handleSelectedTask}">
</dvt:projectGantt>
Java:
private List selectedTaskIds;
public void handleSelectedTask(TaskSelectionEvent evt)
selectedTaskIds = evt.getTaskIds();
What am I doing wrong?
Thank you in advance.
Best regards,
Tom

For the use case where tasks need to be linked (user clicks the "Link" icon in toolbar after selecting tasks), getTaskIds() in handleDataChanged() would return ids in the order tasks were selected.

Buffer Sizes Are Not Equal

Similar Messages

Maybe you are looking for