Buffer table not up to date - Create Model Service Specifications

Hello, when our user try to create Model Service Specifications in tr. ML10 the following error message is arised:
"Buffer table not up to date"
Message no. SE001
Diagnosis
An internal error has occurred.
Procedure
Exit the function and then reinvoke it.
If the error should reoccur, please contact your system administrator."
I cannot any suitable sap notes. Our SAP system is ERP 2005.
Please advice something.

Hi Igor ,
Please check following link which may help you..
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-se001-buffer-table-not-up-to-date-2524832?cv=expanded
Regards,
Kiran M
Edited by: Kiran Madhu on Feb 18, 2009 10:25 PM

Similar Messages

Buffer table not up to date

hi all,
While creating a contact i am getting error as"Buffer table not up to date"..what does it mean..i am working in SRM 5.0 classical scenario...
Thanks&Regards,
Hari...

Hi Sridhar,
This issue generally comes up when the tables that store these entries get full and doesn't allow any further postings.
In most of the cases this will be the issue though for your case i can not say this is the exact issue but this may work.
At this point i don't remember the exact transaction for refreshing but inform your BASIS guys to refresh the buffer tables.They will definitely know the procedure.
Hope this resolves your issue.
Rgds,
Teja

Extended Classic Scenario - SHC: Buffer table not up to date

Hello all,
I'm working in SRM_SERVER 550, SAPKIBKT11, and having issues using BACKEND PURCHASING ORGANISATIONS and the Extended Classic Scenario.
According to SAP note 944918 the following indicator should not be required to be set:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario --> extended classic scenario active.
I did set the Backend Purch. Grps Responsible indicator, and I did create organizational units specifically for the backend purch. grps.
We need to set the main part of all SHCs to ECS, but when I do set the indicator in customizing to "extended classic scenario = active", I get a dump in my web environment: 'buffer table not up to date'.
What is causing this failure in my SHC?
I tried to implement BAdI "BBP_EXTLOCALPO_BADI" (method DETERMINE_EXTPO) like described below here: without the line bbp_extpo_gl-bbpexpo = 'X'., I can continue and create the SHCs. Problem is though: all SHCs will get marked as Classic Scenario. So, to make sure the SHCs will always get marked as ECS, I have added this line in the BAdI. Unfortunately this immediately results in the 'buffer table not up to date' error in the SHC itself, as soon as I try to open the details of the new item.
Hope you help me out here?? It doesn't seem to be related to the BAdI, but somehow the system doesn't allow me to mark SHC items as ECS.
Thanks & Regards,
Berend Oosterhoff
SRM Consultant Accenture Technology Solutions - The Netherlands.
BAdI BBP_EXTLOCALPO_BADI:
method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
data definition----------------------------------------------------*
DATA:    wa_mattype     TYPE BAPIMATDOA,
           wa_char18      TYPE MATNR,
           attrib_tab     TYPE TABLE OF bbp_attributes,
           wa_attrib_tab TYPE bbp_attributes,
           wa_value       TYPE om_attrval,
           wa_product_id TYPE comt_product_id.
    bbp_extpo_gl-bbpexpo = 'X'.
from here I did the specific selection for the SC, but that's not relevant here.

Hi Prashant,
Thanks for your quick reply!
Note 1085700 is about Short Dumps when creating or changing a contract. I am trying to create a Shopping Cart, without a reference to a contract. BAdI BBP_DOC_CHANGE_BADI is not active in our system.
Any other thoughts?
Regards,
Berend

Buffer table not up-to-date error while working with local SRM PO

Hi all,
We are working in SRM 7.0 with extended classic scenario.
I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
UNCAUGHT_EXCEPTION
Buffer table not up-to-date
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDACC
Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
Form: PROCDOC_UPDATE of program SAPLBBP_PD
Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same . Request your kind help in this regard.
Thanks in advance.
Regards,
Kalyani

There could be many issues..
or some data issue.
can you recreate the same issue you can fix it.
it could only one incident so you should thoroghly check what piece of data is wrong.
what actions are you doing in the purchase order.
Note 1580496 - Purchase order Buffer table not upto date dump in change ver
Symptom
1.Create a change version on any Purchase order.
2. Edit quantity of any item
3. Dont press 'Enter key'
4. Clickk on Order button.
Application gves dump 'Buffer table not upto date'
but it is very difficult to say what is the issue. request your technical resource to look your dump.
if you recreate the issue half of the problem resolved.

Getting error as Buffer table not up to date

Hi SRM gurus,
We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
Note
The following error text was processed in the system : Buffer table not up to date
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
Form: CHECK_PO of program SAPLBBP_PO_APP
Form: PROCESS_EVENT of program SAPLBBP_PO_APP
iN BBP_PD the status of this PO is as below.
Stats:
                   Status            Description                             Inactiv
HEADER     I1015          Awaiting Approval                      X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1043          Ordered
HEADER     I1080          In Transfer to Execution Syst.    X
HEADER     I1120          Change was Transmitted
HEADER     I1180          Document Completed
0000000001 I1021          Created
0000000002 I1021          Created
Please suggest / advice on this.
Thanks & Regards
Psamp1

Hi
It is difficult to diagnoise the issue
Note 1180477 - PO processing terminates with buffering table error
see the symptoms in the note
Symptom
You have opened a purchase order using "Process Purchase Order" (BBP_POC). You change some data of this purchase order and then choose "Output" at header level. The system may display error message BBP_PD 001 "Buffer table not up to date", and an entry "UNCAUGHT_EXCEPTION" , "CX_BBP_PD_ABORT" is in transaction ST22
Try to recreate the same issue in develpoment and make ensure that which data is causing this issue.
What is the status of PO ? any archiving done recently on this PO or any data changes in the PO check history to know more information
check SRM-EBP-POR for more related notes. you need to identify which data is causing thie issue
Muthu

Getting error as Buffer table not up to date while checking EBP order

Hi SRM gurus,
We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
Note
The following error text was processed in the system : Buffer table not up to date
The error occurred on the application server bprapz36_SP1_08 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
Form: CHECK_PO of program SAPLBBP_PO_APP
Form: PROCESS_EVENT of program SAPLBBP_PO_APP
iN BBP_PD the status of this PO is as below.
Stats:
                   Status            Description                             Inactiv
HEADER     I1015          Awaiting Approval                      X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1043          Ordered
HEADER     I1080          In Transfer to Execution Syst.    X
HEADER     I1120          Change was Transmitted
HEADER     I1180          Document Completed
0000000001 I1021          Created
0000000002 I1021          Created
Please suggest / advice on this.
Thanks & Regards
Psamp1

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Buffer table not up to date - Bid invitation error

Hi All,
Please help me immediately. Kindly let me know what should I update in PPOMA. I encounter this error everytime I try to open the bid invitation in SRM. Please help immediately. Please
Buffer table not up to date
    Message no. BBP_PD001
Diagnosis
    In FUNC BBP_PDORG_GETDETAIL (function group SAPLBBP_PDORG) an
    inconsistent status was discovered.
Procedure
    Start the transaction again. If the error occurs again, create an OSS
    message.
    To analyze the error, you can set a breakpoint in the function module
    'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.

check the consistency of the user who is trying to open the bid invitation. Give sap_all and test if this works, to isolate any authorization issues.
regards
velu

Buffer table not up to date when searching shopping carts

Hi Friends,
This is probably a common error but could not find specific note or forum threads to my specific issue.
We are on SRM 5.0 Extended Classic with SP level 15. There has been no org changes or user changes.
when existing user tries to pull shopping carts using OLD PO and Template with a time frame, there are no issues and List is displayed to the user. But when the user deselects everything and just selects 'Including completed shopping cart' checkbox and does a search, dump happens with Buffer table not up to date.
I am not sure if combination of timeout error and/or trying to retrieve all his shopping carts ever created buffer issues. Please advise. Atleast user is not new or changed in the org structure. User can shop normally, but not pull all SCs that he created since his first shopping cart.
Please advise
Thanks
Rao

Dear Rao
Go to Tr:ST22, get the dump log details, from there you will find where the error occur, as well as the callstack, Eg, which
FM, form ,has been called before the error occur. Set BP there , so you can proceed debug.
This dump could happen if there are some data is missing for this SC, in this case, FUNCTION 'BBP_LINK_GET_OW'
might interesting.
Regards
Lauren

Buffer Table not up-to-date SUS System

Hi Experts,
I am working in classic decoupled scenario, where the RFx is published to SUS system.
The bidder logs into SUS system and creates Response for RFx. In case of line items more than 10, the system is giving a dump.
The Background program BBP_BID_INV_BACKGROUND_PROC is started and gives a dump in ST22.
The job log shows :Buffer table not up-to-date. Below is the detailed ST 22 Error.
The exception, which is assigned to class 'CX_BBP_PD_ABORT' was not caught and therefore caused a runtime error. The reason for the exception is: Buffer table not up-to-date
Information on where terminated
The termination occurred in ABAP program "SAPLBBP_PDH", in "BBP_PD_ABORT". The main program was "BBP_BID_INV_BACKGROUND_PROC". In the source code, the termination point is in line 81 of (Include) program "LBBP_PDHU08".
I went through other posts with the same error, but could not get any suitable resolutions. Please do let me know where to check for this.
Regards,
Krishna

We're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
JD

Extended Classic Scenario causing a dump "Buffer Table not up to date'

Hi All,
I could create a Shopping Cart in the Classic Scenario.
After activating the Global settings together with the Back end groups responsible for the ECS, I have also a Badi in place for a certain Category id..I expected that for this category id if I create a shopping cart thro' the describe requirement it would create a Local PO and a replica would be generated in the Back end system.
But as and when I add the item to the Shopping Cart, I get an ABAP Dump indicating the buffer table not up to date and a program error "Uncaught exception" in the Program SALBBP_PDH.
I also tried searching SAP Notes,but to vain.Working on SRM 5.0 Release level 12 and ECC 6.0 as back end.
Any body who has faced this before, Pl give me the clues.
Thanks & Regards,
Nagarajan

Hi
it is basis consulatant responsiblity. you must take help from Basis .
Note 26171 - Possible entry values for command field ("OK-code")
Buffer commands:
WARNING: Resetting buffers can significantly change the performance of the
entire system for a long time. It should therefore only be used when there
is a good reason to do so. As of release 3.0B system administator
authorization is required (authorization object S_ADMI_FCD). The action is
noted in the system log.
/$SYNC- This resets all buffers of the application server
/$CUA - This resets the CUA buffers of the application server
/$TAB - This resets the table buffers of the application server
/$NAM - This resets the nametab buffers of the application server
/$DYNP - This resets the screen buffers of the application server
regards
Muthu

CLEAN_REQREQ_UP results in "Buffer Table not up to date"

Dear all,
we are getting an error while running CLEAN_REQREQ_UP (SRM 5.00 / SAPKIBKT11).
Without any selection, the report runs into a "Buffer Table not up to date" error. All scheduled jobs also get aborted.
Tried to reset the buffers using $sync. Does not help. I appreciate any further input.
Cheers,
Claudia

Hi Claudia,
All scheduled jobs also get aborted.
The above problem will mostly occur (i.e. all the background jobs fail) when the database arhieve log/paging is full and the system is not able. Please ask your basis consultants to increase to get this fixed.
Then we have seen quite a few instances in which the job CLEAN_REQREQ_UP goes to similar runtime error:
1. Due to inconsistent document entires in table BBP_DOCUMENT_TAB (usually such documents are created through interfaces, or gets copied during client/system copy etc).
2. The system goes into this runtime error two chances a) While updating the status of these docs or b)while reading these documents
3. The other possibility could be because of custom smartform developments as well
We faced similar situations before and they have all been because of one of the above issues, and we deleted these entries manually. Hope this helps you get them resolved.
Regards
Kathirvel

PO_CREATE error Buffer table not up to date

Hi experts ,
I am create PO using a BAPI, BAPI_POEC_CREATE.And I can see the return messages from this FM its saying that u201C PO has been creating with some numberu201D But I am not able to find the PO in my system . And I tried to save and commit the data base . But still I am getting error Buffer table not up to date   when I calls the FM BBP_PD_PO_SAVE.
Sample coding part of my program
CALL FUNCTION 'BAPI_POEC_CREATE'
   EXPORTING
     I_PO_HEADER            = P_PO_HEADER
IMPORTING
    E_PO_HEADER            = PO_RETURN_HEADER
TABLES
    I_PO_ITEMS                 = P_PO_ITEMS
    I_PO_ACCASS             = P_PO_ACCASS
    I_PO_PARTNER             = P_PO_PARTNER
    I_PO_ORGDATA           = P_PO_ORGDATA
    RETURN                        = P_PO_BASKET_ERRORS.
PO_GUID = PO_RETURN_HEADER-BUSINESSPROCESS.
CALL FUNCTION 'BBP_PD_PO_SAVE'
    EXPORTING
      IV_HEADER_GUID = PO_GUID.
CALL FUNCTION 'BBP_PROCDOC_RESET_BUFFER'.
    COMMIT WORK AND WAIT.
Can anybody give me some pointers to resolve this issue .
Thank you ,

Hi Sumat
Thanks for reply .
But , I am facing the error on the saving the PO itself . Its dumping wit the error Buffer table not up to date
CALL FUNCTION 'BBP_PD_PO_SAVE'
EXPORTING
IV_HEADER_GUID = PO_GUID.
Thank you ,
Edited by: Dhareppa Havalagi on Jul 10, 2009 4:00 AM

Creation of BIDs - BUFFER TABLE NOT UP TO DATE

Hi Experts,
One of my user got this error, buffer table not up to date when shes trying to create a bid invitation. She able to perform view and delete.
Maybe i know what could possibly cause this error?
Thanks.

Hi,
This error occurs when you don't have for example number ranges attached to bid invitation or user, who create the bid is not assigned to the organisational structure.
You can track this error very easy in debugger.
Regards,
Marcin

BBP_BD 002 Buffer table not up to date

Hi,
We are hitting similar error .
We are implementing Extended Classic Scenario.
When i create shopping cart - it saves perfectly - status approved. However if i log in as SRM Administrator and check on Application Monitors - the shopping cart is shown as..
"Shopping cart 1000000133 (PReq. ): BBP_BD 002 Buffer table not up to date "
Hence this shopping cart does not come into the "Sourcing Cockpit" for further processing.
Also, i see a message - "create follow on documents not active" under buyer logon - and - check status - shopping cart - followon functions...
Appreciate if someone can share their expertise on this please.
regards
Srini
SRM Consultant

Hi experts
New fields are added to the datasource .0srm_td_cf (confirmtion data source) in BI SRM (rsa2,rsa3 transaction)
i.e. There are two fields added to the extract structure of the datasource using append structure
The values are to be populated for the new field.
I enhanced RSA5_SAPI_BADI to populate the data in the extractor.
When i check the extractor checker using rsa3 transaction code, it shows a message,
Buffer table not up to date after clicking the extraction at the bottom.
I dont know where to fix the problem like, the problem is with the BADI code or with the resulting table where the values are displayed
Additional info:
When i click the long message for the error
it shows:
Message No : bbp_pd001
Diagnosis.
In FORM LTXT_READ_DATA (function group SAPLBBP_PDLTX) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a break point in the function module 'BBP_PD_ABORT' and look at the call-up heirarchy in debuggging mode.
PLEASE suggest to resolve this issue asap
Points will be rewarded

Buffer table not up to date - BBP_PD_PO_SAVE Function Module

Hi SRM Experts,
I am trying to develop custom program for uploading POs into SRM and got struck at the time of BBP_PD_PO_SAVE function Module.
I followed the follwoing steps:
Step 1: Creating PO with BBP_PD_PO_CREATE - this step executed successfully.
Step 2: Trying to save PO data into SRM with BBP_PD_PO_SAVE - this step I am getting error message "Buffer table not up to date".
CALL FUNCTION 'BBP_PD_PO_SAVE'
EXPORTING
IV_WORKITEM_ID               =
IV_USERTYPE                  =
   IV_HEADER_GUID               = wa_header-guid
IV_CREATE_HIST_VERSION       =
wa_header-guid - PO GUID which is created in first step.
Please let me know any suggestions or solution on this.
Thanks,
Koyya

Hi Koyya ,
I am also doing the same in our project . But i am able to save the PO using BBP_PD_PO_SAVE Function Module .
If you are getting this error means , then you check the all guids mapping part .
Check all item guids ...have mentioned same parent guid
same to account deatils and partner data also.
Thank you ,
Bharathi

Buffer table not up to date - Create Model Service Specifications

Similar Messages

Maybe you are looking for