Buffer table not up to date in SUS
Hello All,
While I am trying to process Purchase order in SUS portal, when i try to confirm the Item, it is giving me error
"Buffer table not up to date".
Any idea about this problem?
Thanks,
Hetal
We're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
JD
Similar Messages
-
BSP error when clicking on line item in SUS :Buffer table not up to date
Hi Experts,
I'm having a problem in SUS Portal. When i click on a line item of a PO to display the actual line item or see more details, i get a buffer table out of date error. I saw a thread with a similar issue where it says problem resolved but haven't had any luck getting a response from the poster, so I'm putting this question out there to everyone.
Related Post
Buffer table not up to date in SUS
More details on error...
Exception Class CX_BBP_PD_ABORT
Error Name
Program SAPLBBP_PDH
Include LBBP_PDHU08
Line 81
Long text Buffer table not up-to-date {}
Regards,
JD
Edited by: julian.k. drummond on Apr 13, 2010 6:46 PMHi Julian,
Please give the system some time and try again. It should work.
Thanks
Hari -
Buffer Table not up-to-date SUS System
Hi Experts,
I am working in classic decoupled scenario, where the RFx is published to SUS system.
The bidder logs into SUS system and creates Response for RFx. In case of line items more than 10, the system is giving a dump.
The Background program BBP_BID_INV_BACKGROUND_PROC is started and gives a dump in ST22.
The job log shows :Buffer table not up-to-date. Below is the detailed ST 22 Error.
The exception, which is assigned to class 'CX_BBP_PD_ABORT' was not caught and therefore caused a runtime error. The reason for the exception is: Buffer table not up-to-date
Information on where terminated
The termination occurred in ABAP program "SAPLBBP_PDH", in "BBP_PD_ABORT". The main program was "BBP_BID_INV_BACKGROUND_PROC". In the source code, the termination point is in line 81 of (Include) program "LBBP_PDHU08".
I went through other posts with the same error, but could not get any suitable resolutions. Please do let me know where to check for this.
Regards,
KrishnaWe're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
JD -
hi all,
While creating a contact i am getting error as"Buffer table not up to date"..what does it mean..i am working in SRM 5.0 classical scenario...
Thanks&Regards,
Hari...Hi Sridhar,
This issue generally comes up when the tables that store these entries get full and doesn't allow any further postings.
In most of the cases this will be the issue though for your case i can not say this is the exact issue but this may work.
At this point i don't remember the exact transaction for refreshing but inform your BASIS guys to refresh the buffer tables.They will definitely know the procedure.
Hope this resolves your issue.
Rgds,
Teja -
Extended Classic Scenario - SHC: Buffer table not up to date
Hello all,
I'm working in SRM_SERVER 550, SAPKIBKT11, and having issues using BACKEND PURCHASING ORGANISATIONS and the Extended Classic Scenario.
According to SAP note 944918 the following indicator should not be required to be set:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario --> extended classic scenario active.
I did set the Backend Purch. Grps Responsible indicator, and I did create organizational units specifically for the backend purch. grps.
We need to set the main part of all SHCs to ECS, but when I do set the indicator in customizing to "extended classic scenario = active", I get a dump in my web environment: 'buffer table not up to date'.
What is causing this failure in my SHC?
I tried to implement BAdI "BBP_EXTLOCALPO_BADI" (method DETERMINE_EXTPO) like described below here: without the line bbp_extpo_gl-bbpexpo = 'X'., I can continue and create the SHCs. Problem is though: all SHCs will get marked as Classic Scenario. So, to make sure the SHCs will always get marked as ECS, I have added this line in the BAdI. Unfortunately this immediately results in the 'buffer table not up to date' error in the SHC itself, as soon as I try to open the details of the new item.
Hope you help me out here?? It doesn't seem to be related to the BAdI, but somehow the system doesn't allow me to mark SHC items as ECS.
Thanks & Regards,
Berend Oosterhoff
SRM Consultant Accenture Technology Solutions - The Netherlands.
BAdI BBP_EXTLOCALPO_BADI:
method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
data definition----------------------------------------------------*
DATA: wa_mattype TYPE BAPIMATDOA,
wa_char18 TYPE MATNR,
attrib_tab TYPE TABLE OF bbp_attributes,
wa_attrib_tab TYPE bbp_attributes,
wa_value TYPE om_attrval,
wa_product_id TYPE comt_product_id.
bbp_extpo_gl-bbpexpo = 'X'.
from here I did the specific selection for the SC, but that's not relevant here.Hi Prashant,
Thanks for your quick reply!
Note 1085700 is about Short Dumps when creating or changing a contract. I am trying to create a Shopping Cart, without a reference to a contract. BAdI BBP_DOC_CHANGE_BADI is not active in our system.
Any other thoughts?
Regards,
Berend -
Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation
Hi experts,
We are running SRM 5.5 with Support Level 16.
We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
ITEM 1: HIER (Bid Outline)
ITEM 2: Line Item
ITEM 3: HIER (Bid Outline)
ITEM 4: Line Item
However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
Transaction: BBP_BID_INV
Program: SAPLBBP_PDH
Screen: SAPLBBP_BID_INV_1000
Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
In the source code you have the termination point in line 73.
Active Calls/Events
(formatted below as "No: Type: Name")
24: Function: BBP_PD_ABORT
23: Form: ABORT
22: Form: ITMADM_UPDATE
21: Form: ITMADM_MAINTAIN_SINGLE
20: Form: ITEM_F_CHECK_FROM_WTAB
19: Form: ITEMLIST_F_CHECK
18: Function: BBP_ITEMLIST_CHECK
17: Form: PROCDOC_DB_CHECK
16: Form: PROCDOC_CHECK
15: Function: BBP_PROCDOC_CHECK
14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
13: Form: STATUS_SET_AND_INTERNAL_SAVE
12: Form: PROCDOC_UPDATE
11: Function: BBP_PROCDOC_UPDATE
10: Form: CHANGE_VERSION_UPDATES_ACTIVE
9: Function: BBP_PDCV_UPDATE_ACTIVE
8: Form: PROCDOC_CHECK
7: Function: BBP_PROCDOC_CHECK
6: Function: BBP_PD_BID_CHECK
5: Form: FCODE_DOCUMENT_CHECK
4: Form: FCODE
3: Function: BBP_BID_PROCESS
2: Form: PROCESS
1: Module (PAI): PROCESS
The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
* parent guids have to be identical ...
if gt_itmadm-parent <> w_itmadm-parent.
perform abort.
endif.
Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
Any suggestions would be greatly appreciated.
Thanks!
Best regards,
Kwong HowHi Janu,
For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
Otherwise, we will raise a message as suggested.
Thank you so much for your help!
Best regards,
Kwong How -
Buffer table not up-to-date error while working with local SRM PO
Hi all,
We are working in SRM 7.0 with extended classic scenario.
I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
UNCAUGHT_EXCEPTION
Buffer table not up-to-date
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDACC
Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
Form: PROCDOC_UPDATE of program SAPLBBP_PD
Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same . Request your kind help in this regard.
Thanks in advance.
Regards,
KalyaniThere could be many issues..
or some data issue.
can you recreate the same issue you can fix it.
it could only one incident so you should thoroghly check what piece of data is wrong.
what actions are you doing in the purchase order.
Note 1580496 - Purchase order Buffer table not upto date dump in change ver
Symptom
1.Create a change version on any Purchase order.
2. Edit quantity of any item
3. Dont press 'Enter key'
4. Clickk on Order button.
Application gves dump 'Buffer table not upto date'
but it is very difficult to say what is the issue. request your technical resource to look your dump.
if you recreate the issue half of the problem resolved. -
Getting error as Buffer table not up to date
Hi SRM gurus,
We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
Note
The following error text was processed in the system : Buffer table not up to date
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
Form: CHECK_PO of program SAPLBBP_PO_APP
Form: PROCESS_EVENT of program SAPLBBP_PO_APP
iN BBP_PD the status of this PO is as below.
Stats:
Status Description Inactiv
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1120 Change was Transmitted
HEADER I1180 Document Completed
0000000001 I1021 Created
0000000002 I1021 Created
Please suggest / advice on this.
Thanks & Regards
Psamp1Hi
It is difficult to diagnoise the issue
Note 1180477 - PO processing terminates with buffering table error
see the symptoms in the note
Symptom
You have opened a purchase order using "Process Purchase Order" (BBP_POC). You change some data of this purchase order and then choose "Output" at header level. The system may display error message BBP_PD 001 "Buffer table not up to date", and an entry "UNCAUGHT_EXCEPTION" , "CX_BBP_PD_ABORT" is in transaction ST22
Try to recreate the same issue in develpoment and make ensure that which data is causing this issue.
What is the status of PO ? any archiving done recently on this PO or any data changes in the PO check history to know more information
check SRM-EBP-POR for more related notes. you need to identify which data is causing thie issue
Muthu -
Getting error as Buffer table not up to date while checking EBP order
Hi SRM gurus,
We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
Note
The following error text was processed in the system : Buffer table not up to date
The error occurred on the application server bprapz36_SP1_08 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
Form: CHECK_PO of program SAPLBBP_PO_APP
Form: PROCESS_EVENT of program SAPLBBP_PO_APP
iN BBP_PD the status of this PO is as below.
Stats:
Status Description Inactiv
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1120 Change was Transmitted
HEADER I1180 Document Completed
0000000001 I1021 Created
0000000002 I1021 Created
Please suggest / advice on this.
Thanks & Regards
Psamp1Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
Buffer table not up to date - Bid invitation error
Hi All,
Please help me immediately. Kindly let me know what should I update in PPOMA. I encounter this error everytime I try to open the bid invitation in SRM. Please help immediately. Please
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FUNC BBP_PDORG_GETDETAIL (function group SAPLBBP_PDORG) an
inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS
message.
To analyze the error, you can set a breakpoint in the function module
'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.check the consistency of the user who is trying to open the bid invitation. Give sap_all and test if this works, to isolate any authorization issues.
regards
velu -
Buffer table not up to date - Create Model Service Specifications
Hello, when our user try to create Model Service Specifications in tr. ML10 the following error message is arised:
"Buffer table not up to date"
Message no. SE001
Diagnosis
An internal error has occurred.
Procedure
Exit the function and then reinvoke it.
If the error should reoccur, please contact your system administrator."
I cannot any suitable sap notes. Our SAP system is ERP 2005.
Please advice something.Hi Igor ,
Please check following link which may help you..
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-se001-buffer-table-not-up-to-date-2524832?cv=expanded
Regards,
Kiran M
Edited by: Kiran Madhu on Feb 18, 2009 10:25 PM -
Buffer table not up to date error
Hi Experts,
While i was executing the function module "BBP_PD_SC_STATUS_CHANGE_WF", it is throughing "buffer table not up to date".
I have given the values correctly to the above function module.
Regards,
ChanduHi Chandu,
Please contact your basis team. Usually buffer tables will refresh alwys....
Thanks
Ravi -
Buffer table not up to date while changing contr
Hi ,
While changing contracts in SRM we are getting a message " Buffer table not up to date " and when we click on this message we get a dump with the below information :
This error is occuring in the program SAPLBBP_PDH ,saying :
The exception 'CX_BBP_PD_ABORT' was raised but was not caught at any stage in
the call hierarchy.
"UNCAUGHT_EXCEPTION" CX_BBP_PD_ABORTC
"SAPLBBP_PDH" or "LBBP_PDHU08"
"BBP_PD_ABORT"
Can you please suggest what needs to be done for this case ?
Thanks ,
Suchi.Hi,
Please check this SAP note : 1383589
Regards,
Srini. -
Buffer Table not up to date error while accessing Catalogs
Hello,
I am getting Buffer table not up-to-date error while accessing ARIBA Procurement Catalogs.
Initially, my Test system was pointing to Production Catalogs but now, when I changed the settings in "Define External Web Services" and pointed it to DEV Catalogs, it is failing with error: "Buffer Table not up-to-Date"
Refreshed the Buffer already but still error not fixed.
We already have the similar settings in other systems and there the connections are working fine
Please advise
Regards
Manish AgrawalHi Manish,
Could you please check the below notes and implement the same since I had the same issue upon punching out from the catalog to SRM system.
2041631 - Simplified Shopping Cart:Dump on Check Out From Catalog
2086844 - Dump "Buffer table not up-to-date" on Check Out from Catalog
In addition to the above, please maintain the portal information in the path as shown in the below screen shot
Kindly check and let me know on how it goes.
Best Regards,
Bharathi -
Buffer table not up to date when searching shopping carts
Hi Friends,
This is probably a common error but could not find specific note or forum threads to my specific issue.
We are on SRM 5.0 Extended Classic with SP level 15. There has been no org changes or user changes.
when existing user tries to pull shopping carts using OLD PO and Template with a time frame, there are no issues and List is displayed to the user. But when the user deselects everything and just selects 'Including completed shopping cart' checkbox and does a search, dump happens with Buffer table not up to date.
I am not sure if combination of timeout error and/or trying to retrieve all his shopping carts ever created buffer issues. Please advise. Atleast user is not new or changed in the org structure. User can shop normally, but not pull all SCs that he created since his first shopping cart.
Please advise
Thanks
RaoDear Rao
Go to Tr:ST22, get the dump log details, from there you will find where the error occur, as well as the callstack, Eg, which
FM, form ,has been called before the error occur. Set BP there , so you can proceed debug.
This dump could happen if there are some data is missing for this SC, in this case, FUNCTION 'BBP_LINK_GET_OW'
might interesting.
Regards
Lauren
Maybe you are looking for
-
CS4 Some components wont install ..re. color profiles
when installing CS4 on Windows 7 PC, got error message, some components of Illustrator, photoshop, etc. could not be installed. Ran Adobe Advisor, Problem id.color profiles and permissions. followed instrucitons from adobe help re. editing registry
-
Missing Characters in Frame Generated PDFs
I had an odd thing happen, that I thought I'd pass on. I was working on my Mac to generate some statistical output. I printed out the results to pdf, imported the results in to a Frame 8 document as a referenced graphic. I then saved as a PDF with al
-
SAP Cloud For Customer Account 360 Setup
Hi Experts, Please I Need Very Urgent Help regarding the Setup Account 360 Connection with CRM. I have configured the Cloud System as well as CRM System mention in Account 360 Guide like ( Download Web Service From Cloud , Create Client Proxy in CRM
-
I have a harddrive that is just USB 2.0. I need to get footage onto the drive from a Mac that has Firewire 400 ports. Is there a cheap cord I can buy to do this. Any links to this would be appreciated. Thank You, Evan Jacobs www.anhedeniafilms.com
-
How to create an ad banner using Flash Catalyst
This should be an easy question to answer...I've been able to create a variety of ad banners using Flash Catalyst but none of the online tutorials show how to link the ad banner to a URL...i.e. when someone clicks on the banner. I don't like the ide