Buffer table not update
Hello all,
I tried to create a Scart for a category id meant for Classic scenario but I get an error that "Buffer Table not update " and it is resulting in a ABAP Dump.However, for the Categoryid for Ext. Classic Scenario it is working fine.
I tried SWU_OBUF also.
Any body ,Pl enlighten on how to proceed further?
Thanks & Regards,
Nagarajan
Addl Info:
1) Activated the Global settings for Extended Classic Scenario
2) Activated the BADI for control of Extended Classic Scenario
Hi,
Go to the SMQ1 and SMQ2 in both the frontend and backend systems and check for any queues of material replication still running or held.
Delete all the obsolete entries in this.
This may help you as in our system it worked once for this buffer table not uptodate issue.
Best regards,
Sridhar.
Similar Messages
-
Shopping Cart Error: Buffer Table not up to date
Hi All,
We are getting a short dump with following error when some users are clicking on 'Shop' option:-
We have checked the org attributes, user attributes and roles, but they look fine. Please help.
<The following error text was processed in the system SRP: Buffer Table not up to date
The error occurred on the application server sacsrpci_SRP_02 and in the work process 0
The termination type was: RABAX_STATE
The ABAP Call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDORG
Form: CHECK_PROC_ORG_AND_GROUP of program SAPLBBP_PDORG
Form: ORG_CHECK_SINGLE of program SAPLBBP_PDORG
Form: ORG_MAINTAIN_SINGLE of program SAPLBBP_PDORG
Function: BBP_PDORG_CHECK of program SAPLBBP_PDORG
Form: ITEM_F_CHECK_FROM_WTAB of program SAPLBBP_PDIAD
Form: ITEMLIST_F_CHECK of program SAPLBBP_PDIAD
Function: BBP_ITEMLIST_CHECK of program SAPLBBP_PDIAD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD >Hi,
1) Please check the same in GUI when you shop using BBPSC01 and check if the error exists.
2) If you have modified any of the workflows then go to the transaction SWU_OBUF and clear the buffer.
3) If you have any of the long pending queues in the SMQ1 and SMQ2 check and clear all the unnecessary queues.
Also check OSS note 673372 and these links :
Re: buffer table not upto date
Buffer table not up to date
Buffer table not updated error !!!!!
Best regards,
Sridhar -
Buffer table not up to date - Bid invitation error
Hi All,
Please help me immediately. Kindly let me know what should I update in PPOMA. I encounter this error everytime I try to open the bid invitation in SRM. Please help immediately. Please
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FUNC BBP_PDORG_GETDETAIL (function group SAPLBBP_PDORG) an
inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS
message.
To analyze the error, you can set a breakpoint in the function module
'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.check the consistency of the user who is trying to open the bid invitation. Give sap_all and test if this works, to isolate any authorization issues.
regards
velu -
CLEAN_REQREQ_UP results in "Buffer Table not up to date"
Dear all,
we are getting an error while running CLEAN_REQREQ_UP (SRM 5.00 / SAPKIBKT11).
Without any selection, the report runs into a "Buffer Table not up to date" error. All scheduled jobs also get aborted.
Tried to reset the buffers using $sync. Does not help. I appreciate any further input.
Cheers,
ClaudiaHi Claudia,
All scheduled jobs also get aborted.
The above problem will mostly occur (i.e. all the background jobs fail) when the database arhieve log/paging is full and the system is not able. Please ask your basis consultants to increase to get this fixed.
Then we have seen quite a few instances in which the job CLEAN_REQREQ_UP goes to similar runtime error:
1. Due to inconsistent document entires in table BBP_DOCUMENT_TAB (usually such documents are created through interfaces, or gets copied during client/system copy etc).
2. The system goes into this runtime error two chances a) While updating the status of these docs or b)while reading these documents
3. The other possibility could be because of custom smartform developments as well
We faced similar situations before and they have all been because of one of the above issues, and we deleted these entries manually. Hope this helps you get them resolved.
Regards
Kathirvel -
hi all,
While creating a contact i am getting error as"Buffer table not up to date"..what does it mean..i am working in SRM 5.0 classical scenario...
Thanks&Regards,
Hari...Hi Sridhar,
This issue generally comes up when the tables that store these entries get full and doesn't allow any further postings.
In most of the cases this will be the issue though for your case i can not say this is the exact issue but this may work.
At this point i don't remember the exact transaction for refreshing but inform your BASIS guys to refresh the buffer tables.They will definitely know the procedure.
Hope this resolves your issue.
Rgds,
Teja -
Extended Classic Scenario - SHC: Buffer table not up to date
Hello all,
I'm working in SRM_SERVER 550, SAPKIBKT11, and having issues using BACKEND PURCHASING ORGANISATIONS and the Extended Classic Scenario.
According to SAP note 944918 the following indicator should not be required to be set:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario --> extended classic scenario active.
I did set the Backend Purch. Grps Responsible indicator, and I did create organizational units specifically for the backend purch. grps.
We need to set the main part of all SHCs to ECS, but when I do set the indicator in customizing to "extended classic scenario = active", I get a dump in my web environment: 'buffer table not up to date'.
What is causing this failure in my SHC?
I tried to implement BAdI "BBP_EXTLOCALPO_BADI" (method DETERMINE_EXTPO) like described below here: without the line bbp_extpo_gl-bbpexpo = 'X'., I can continue and create the SHCs. Problem is though: all SHCs will get marked as Classic Scenario. So, to make sure the SHCs will always get marked as ECS, I have added this line in the BAdI. Unfortunately this immediately results in the 'buffer table not up to date' error in the SHC itself, as soon as I try to open the details of the new item.
Hope you help me out here?? It doesn't seem to be related to the BAdI, but somehow the system doesn't allow me to mark SHC items as ECS.
Thanks & Regards,
Berend Oosterhoff
SRM Consultant Accenture Technology Solutions - The Netherlands.
BAdI BBP_EXTLOCALPO_BADI:
method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
data definition----------------------------------------------------*
DATA: wa_mattype TYPE BAPIMATDOA,
wa_char18 TYPE MATNR,
attrib_tab TYPE TABLE OF bbp_attributes,
wa_attrib_tab TYPE bbp_attributes,
wa_value TYPE om_attrval,
wa_product_id TYPE comt_product_id.
bbp_extpo_gl-bbpexpo = 'X'.
from here I did the specific selection for the SC, but that's not relevant here.Hi Prashant,
Thanks for your quick reply!
Note 1085700 is about Short Dumps when creating or changing a contract. I am trying to create a Shopping Cart, without a reference to a contract. BAdI BBP_DOC_CHANGE_BADI is not active in our system.
Any other thoughts?
Regards,
Berend -
Validity Table not updating for 0IC_C03 while updating data
Hi,
1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
Key fields : 0Plant
0Calday
if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
and 2LIS_03_BX in DTP I am getting below this option only
Can you please give me solution for this issues.
Regards
UmashankarHi Uma,
Please go through the below link which might be helpful.
Not able to Edit Validity Table : RSDV
Marker Update Option is available under Collapse tab of Info cube.
Thanks,
Karan -
BSP error when clicking on line item in SUS :Buffer table not up to date
Hi Experts,
I'm having a problem in SUS Portal. When i click on a line item of a PO to display the actual line item or see more details, i get a buffer table out of date error. I saw a thread with a similar issue where it says problem resolved but haven't had any luck getting a response from the poster, so I'm putting this question out there to everyone.
Related Post
Buffer table not up to date in SUS
More details on error...
Exception Class CX_BBP_PD_ABORT
Error Name
Program SAPLBBP_PDH
Include LBBP_PDHU08
Line 81
Long text Buffer table not up-to-date {}
Regards,
JD
Edited by: julian.k. drummond on Apr 13, 2010 6:46 PMHi Julian,
Please give the system some time and try again. It should work.
Thanks
Hari -
Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation
Hi experts,
We are running SRM 5.5 with Support Level 16.
We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
ITEM 1: HIER (Bid Outline)
ITEM 2: Line Item
ITEM 3: HIER (Bid Outline)
ITEM 4: Line Item
However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
Transaction: BBP_BID_INV
Program: SAPLBBP_PDH
Screen: SAPLBBP_BID_INV_1000
Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
In the source code you have the termination point in line 73.
Active Calls/Events
(formatted below as "No: Type: Name")
24: Function: BBP_PD_ABORT
23: Form: ABORT
22: Form: ITMADM_UPDATE
21: Form: ITMADM_MAINTAIN_SINGLE
20: Form: ITEM_F_CHECK_FROM_WTAB
19: Form: ITEMLIST_F_CHECK
18: Function: BBP_ITEMLIST_CHECK
17: Form: PROCDOC_DB_CHECK
16: Form: PROCDOC_CHECK
15: Function: BBP_PROCDOC_CHECK
14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
13: Form: STATUS_SET_AND_INTERNAL_SAVE
12: Form: PROCDOC_UPDATE
11: Function: BBP_PROCDOC_UPDATE
10: Form: CHANGE_VERSION_UPDATES_ACTIVE
9: Function: BBP_PDCV_UPDATE_ACTIVE
8: Form: PROCDOC_CHECK
7: Function: BBP_PROCDOC_CHECK
6: Function: BBP_PD_BID_CHECK
5: Form: FCODE_DOCUMENT_CHECK
4: Form: FCODE
3: Function: BBP_BID_PROCESS
2: Form: PROCESS
1: Module (PAI): PROCESS
The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
* parent guids have to be identical ...
if gt_itmadm-parent <> w_itmadm-parent.
perform abort.
endif.
Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
Any suggestions would be greatly appreciated.
Thanks!
Best regards,
Kwong HowHi Janu,
For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
Otherwise, we will raise a message as suggested.
Thank you so much for your help!
Best regards,
Kwong How -
Buffer table not up-to-date error while working with local SRM PO
Hi all,
We are working in SRM 7.0 with extended classic scenario.
I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
UNCAUGHT_EXCEPTION
Buffer table not up-to-date
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDACC
Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
Form: PROCDOC_UPDATE of program SAPLBBP_PD
Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same . Request your kind help in this regard.
Thanks in advance.
Regards,
KalyaniThere could be many issues..
or some data issue.
can you recreate the same issue you can fix it.
it could only one incident so you should thoroghly check what piece of data is wrong.
what actions are you doing in the purchase order.
Note 1580496 - Purchase order Buffer table not upto date dump in change ver
Symptom
1.Create a change version on any Purchase order.
2. Edit quantity of any item
3. Dont press 'Enter key'
4. Clickk on Order button.
Application gves dump 'Buffer table not upto date'
but it is very difficult to say what is the issue. request your technical resource to look your dump.
if you recreate the issue half of the problem resolved. -
Parts master table not updating
SP3 parts inventory table not updating even though set to synchronise through webtools
thank you had to rebuild links on table
-
Getting error as Buffer table not up to date
Hi SRM gurus,
We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
Note
The following error text was processed in the system : Buffer table not up to date
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
Form: CHECK_PO of program SAPLBBP_PO_APP
Form: PROCESS_EVENT of program SAPLBBP_PO_APP
iN BBP_PD the status of this PO is as below.
Stats:
Status Description Inactiv
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1120 Change was Transmitted
HEADER I1180 Document Completed
0000000001 I1021 Created
0000000002 I1021 Created
Please suggest / advice on this.
Thanks & Regards
Psamp1Hi
It is difficult to diagnoise the issue
Note 1180477 - PO processing terminates with buffering table error
see the symptoms in the note
Symptom
You have opened a purchase order using "Process Purchase Order" (BBP_POC). You change some data of this purchase order and then choose "Output" at header level. The system may display error message BBP_PD 001 "Buffer table not up to date", and an entry "UNCAUGHT_EXCEPTION" , "CX_BBP_PD_ABORT" is in transaction ST22
Try to recreate the same issue in develpoment and make ensure that which data is causing this issue.
What is the status of PO ? any archiving done recently on this PO or any data changes in the PO check history to know more information
check SRM-EBP-POR for more related notes. you need to identify which data is causing thie issue
Muthu -
Getting error as Buffer table not up to date while checking EBP order
Hi SRM gurus,
We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
Note
The following error text was processed in the system : Buffer table not up to date
The error occurred on the application server bprapz36_SP1_08 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PD
Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
Form: PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
Form: CHECK_PO of program SAPLBBP_PO_APP
Form: PROCESS_EVENT of program SAPLBBP_PO_APP
iN BBP_PD the status of this PO is as below.
Stats:
Status Description Inactiv
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1043 Ordered
HEADER I1080 In Transfer to Execution Syst. X
HEADER I1120 Change was Transmitted
HEADER I1180 Document Completed
0000000001 I1021 Created
0000000002 I1021 Created
Please suggest / advice on this.
Thanks & Regards
Psamp1Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
Hi All,
I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution. Is the issue related to administration?
Regards,
GarimaCheck this note, if this might be relevant for this issue:
https://service.sap.com/sap/support/notes/934199
Thanks
SM -
Buffer table not up to date in SUS
Hello All,
While I am trying to process Purchase order in SUS portal, when i try to confirm the Item, it is giving me error
"Buffer table not up to date".
Any idea about this problem?
Thanks,
HetalWe're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
JD
Maybe you are looking for
-
Error Code A12E4 with Adobe Application Manager
I have been on the 30 day trial of the Creative Cloud, and have now just signed up for my membership. I went in to download more apps and check for updates on the ones I already have. No matter what I try to download, it of course opens the Adobe Ap
-
Safari flickering while scrolling up and down in os mavericks
Hello, I installed OSX Mavericks since yesterday, and I'm facing certain issues while using Safari. While trying to scroll up /down the screen flickers. Same thing applies while opening App Store. Haven't noticed it in any other app (i.e. Chrome). I'
-
Shot in 60i on a DVX100B, FCP easy setup?
Hi, I have been using a Panasonic DVX100B (NTSC) in 24PA mode and capturing/editing in FCP, I'm very happy, not too much trouble. now I have tried to shoot in 60i mode (scene 1), I cannot find an easy setup preset.... 1: What's the best capture setti
-
Unable to start in single-user mode - HD dead?
My MacBook Pro (Mac OS X) refused to start, it hung up on the loading screen where you see the apple and the spinning loading wheel. I found out how to fix this, I had to go into single-user mode and type "/sbin/fsck -fy" to repair/verify the disk (I
-
Importer process server.exe has stopped working
once i want to capture a long video, and when close premier pro this appear importer process server. exe has stopped working i really need help to fix it!!!