Buffer Table not upto date

Hi All,
I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution. Is the issue related to administration?
Regards,
Garima

Check this note, if this might be relevant for this issue:
https://service.sap.com/sap/support/notes/934199
Thanks
SM

Similar Messages

  • "Buffer table not upto date" while creating Service entry via BAPI

    Hi All,
    I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution.
    Regards,
    Garima

    Hi ,
    Please close all the applications and re-check your rquirement.
    Also, check for any information from SM21 logs.
    Some times, it can be due to program /report not correctly maintained.
    Finally, Basis people need to validate & may re-start (cautios of Production system) system.
    Regards
    Nagaraju

  • Dump ( Buffer table not upto date )

    All,
    We are getting dump with message 'Buffer table not udpate to date'  when trying to shop  ( transaction 'BBPSC01' ).
    Any inputs ?
    Thanks
    Maron

    Hi,
    Please check the Orgnization structure of the user  , who is creating shopping cart.
    Some times , if orgnation strcture is not correct. We will get this message.
    Hope this will helps.
    Thanks
    Venkatesh P

  • Buffer table not up-to-date error while working with local SRM PO

    Hi all,
    We are working in SRM 7.0  with extended classic scenario.
    I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
    Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
    http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    UNCAUGHT_EXCEPTION
    Buffer table not up-to-date
    Function: BBP_PD_ABORT of program SAPLBBP_PDH
    Form: ABORT of program SAPLBBP_PDACC
    Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
    Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
    Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
    Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
    Form: PROCDOC_UPDATE of program SAPLBBP_PD
    Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
    Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
    Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
    http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same .  Request your kind help in this regard.
    Thanks in advance.
    Regards,
    Kalyani

    There could be many issues..
    or some data issue.
    can you recreate the same issue you can fix it.
    it could only one incident so you should thoroghly check what piece of data is wrong.
    what actions are you doing in the purchase order.
    Note 1580496 - Purchase order Buffer table not upto date dump in change ver
    Symptom
    1.Create a change version on any Purchase order.
    2. Edit quantity of any item
    3. Dont press 'Enter key'
    4. Clickk on Order button.
    Application gves dump 'Buffer table not upto date'
    but it is very difficult to say what is the issue. request your technical resource to look your dump.
    if you recreate the issue half of the problem resolved.

  • Shopping Cart Error: Buffer Table not up to date

    Hi All,
    We are getting a short dump with following error when some users are clicking on 'Shop' option:-
    We have checked the org attributes, user attributes and roles, but they look fine. Please help.
    <The following error text was processed in the system SRP: Buffer Table not up to date
    The error occurred on the application server sacsrpci_SRP_02 and in the work process 0
    The termination type was: RABAX_STATE
    The ABAP Call stack was:
    Function: BBP_PD_ABORT of program SAPLBBP_PDH
    Form: ABORT of program SAPLBBP_PDORG
    Form: CHECK_PROC_ORG_AND_GROUP of program SAPLBBP_PDORG
    Form: ORG_CHECK_SINGLE of program SAPLBBP_PDORG
    Form: ORG_MAINTAIN_SINGLE of program SAPLBBP_PDORG
    Function: BBP_PDORG_CHECK of program SAPLBBP_PDORG
    Form: ITEM_F_CHECK_FROM_WTAB of program SAPLBBP_PDIAD
    Form: ITEMLIST_F_CHECK of program SAPLBBP_PDIAD
    Function: BBP_ITEMLIST_CHECK of program SAPLBBP_PDIAD
    Form: PROCDOC_DB_CHECK of program SAPLBBP_PD     >

    Hi,
    1)  Please check the same in GUI when you shop using BBPSC01 and check if the error exists.
    2)  If you have modified any of the workflows then go to the transaction SWU_OBUF and clear the buffer.
    3)  If you have any of the long pending queues in the SMQ1 and SMQ2 check and clear all the unnecessary queues.
    Also check OSS note 673372 and these links :
    Re: buffer table not upto date
    Buffer table not up to date
    Buffer table not updated error !!!!!
    Best regards,
    Sridhar

  • BAPI- BAPI_PO_CHANGE - Buffer table not up to date

    Dear All,
    I am facing problem when updating PO using BAPI FM  "BAPI_PO_CHANGE".
    Using excel file i am uploading data to system and updating fields. Here excel file have more than 100 records.
    problem is if two documents have same error message first one giving what is the errror message there, but second one it giving
    error message like "Buffer table is not upto date", this error message coming from BAPI and it displaying.
    I have need that what is the error message first document have that message have to display in output.
    means  error message  "Buffer table is not upto date" Instead it should display the first document message.
    But when i run differently it giving what is the error message is there that is displaying.
    if u run continually that it giving message "Buffer table is not upto date".
    please let me know ASAP.
    Regards,
    Srinivas.
    Edited by: Sreenivas B on Mar 25, 2010 2:20 PM

    Hi Moorthy
    Please check below components
    s/w Component       Release
         WP-PI                600_46C
         ST-PI                2005_1_46C
         ST-A/PI               01L_R3_46C
        SAP_NOTES       46C
        SAP_HR               46C
      SAP_BASIS          46C
      SAP_APPL               46C
      SAP_ABA               46C
      CIN               40A
    Best Reagrds,
    Srinivas

  • Buffer table not up to date

    hi all,
    While creating a contact i am getting error as"Buffer table not up to date"..what does it mean..i am working in SRM 5.0 classical scenario...
    Thanks&Regards,
    Hari...

    Hi Sridhar,
    This issue generally comes up when the tables that store these entries get full and doesn't allow any further postings.
    In most of the cases this will be the issue though for your case i can not say this is the exact issue but this may work.
    At this point i don't remember the exact transaction for refreshing but inform your BASIS guys to refresh the buffer tables.They will definitely know the procedure.
    Hope this resolves your issue.
    Rgds,
    Teja

  • Extended Classic Scenario - SHC: Buffer table not up to date

    Hello all,
    I'm working in SRM_SERVER 550, SAPKIBKT11, and having issues using BACKEND PURCHASING ORGANISATIONS and the Extended Classic Scenario.
    According to SAP note 944918 the following indicator should not be required to be set:
    Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario --> extended classic scenario active.
    I did set the Backend Purch. Grps Responsible indicator, and I did create organizational units specifically for the backend purch. grps.
    We need to set the main part of all SHCs to ECS, but when I do set the indicator in customizing to "extended classic scenario = active", I get a dump in my web environment: 'buffer table not up to date'.
    What is causing this failure in my SHC?
    I tried to implement BAdI "BBP_EXTLOCALPO_BADI" (method DETERMINE_EXTPO) like described below here: without the line bbp_extpo_gl-bbpexpo = 'X'., I can continue and create the SHCs. Problem is though: all SHCs will get marked as Classic Scenario. So, to make sure the SHCs will always get marked as ECS, I have added this line in the BAdI. Unfortunately this immediately results in the 'buffer table not up to date' error in the SHC itself, as soon as I try to open the details of the new item.
    Hope you help me out here?? It doesn't seem to be related to the BAdI, but somehow the system doesn't allow me to mark SHC items as ECS.
    Thanks & Regards,
    Berend Oosterhoff
    SRM Consultant Accenture Technology Solutions - The Netherlands.
    BAdI BBP_EXTLOCALPO_BADI:
    method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
    data definition----------------------------------------------------*
      DATA:    wa_mattype     TYPE BAPIMATDOA,
               wa_char18      TYPE MATNR,
               attrib_tab     TYPE TABLE OF bbp_attributes,
               wa_attrib_tab  TYPE bbp_attributes,
               wa_value       TYPE om_attrval,
               wa_product_id  TYPE comt_product_id.
        bbp_extpo_gl-bbpexpo = 'X'.
    from here I did the specific selection for the SC, but that's not relevant here.

    Hi Prashant,
    Thanks for your quick reply!
    Note 1085700 is about Short Dumps when creating or changing a contract. I am trying to create a Shopping Cart, without a reference to a contract. BAdI BBP_DOC_CHANGE_BADI is not active in our system.
    Any other thoughts?
    Regards,
    Berend

  • BSP error when clicking on line item in SUS :Buffer table not up to date

    Hi Experts,
    I'm having a problem in SUS Portal. When i click on a line item of a PO to display the actual line item or see more details, i get a buffer table out of date error. I saw a thread with a similar issue where it says problem resolved but haven't had any luck getting a response from the poster, so I'm putting this question out there to everyone.
    Related Post
    Buffer table not up to date in SUS
    More details on error...
    Exception Class CX_BBP_PD_ABORT
    Error Name 
    Program SAPLBBP_PDH
    Include LBBP_PDHU08
    Line 81 
    Long text Buffer table not up-to-date {}
    Regards,
    JD
    Edited by: julian.k. drummond on Apr 13, 2010 6:46 PM

    Hi Julian,
    Please give the system some time and try again. It should work.
    Thanks
    Hari

  • Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation

    Hi experts,
    We are running SRM 5.5 with Support Level 16.
    We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
    ITEM 1: HIER (Bid Outline)
    ITEM 2: Line Item
    ITEM 3: HIER (Bid Outline)
    ITEM 4: Line Item
    However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
    Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
    Transaction: BBP_BID_INV
    Program: SAPLBBP_PDH
    Screen: SAPLBBP_BID_INV_1000
    Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
    In the source code you have the termination point in line 73.
    Active Calls/Events
    (formatted below as "No: Type: Name")
    24: Function: BBP_PD_ABORT
    23: Form: ABORT
    22: Form: ITMADM_UPDATE
    21: Form: ITMADM_MAINTAIN_SINGLE
    20: Form: ITEM_F_CHECK_FROM_WTAB
    19: Form: ITEMLIST_F_CHECK
    18: Function: BBP_ITEMLIST_CHECK
    17: Form: PROCDOC_DB_CHECK
    16: Form: PROCDOC_CHECK
    15: Function: BBP_PROCDOC_CHECK
    14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
    13: Form: STATUS_SET_AND_INTERNAL_SAVE
    12: Form: PROCDOC_UPDATE
    11: Function: BBP_PROCDOC_UPDATE
    10: Form: CHANGE_VERSION_UPDATES_ACTIVE
    9: Function: BBP_PDCV_UPDATE_ACTIVE
    8: Form: PROCDOC_CHECK
    7: Function: BBP_PROCDOC_CHECK
    6: Function: BBP_PD_BID_CHECK
    5: Form: FCODE_DOCUMENT_CHECK
    4: Form: FCODE
    3: Function: BBP_BID_PROCESS
    2: Form: PROCESS
    1: Module (PAI): PROCESS
    The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
    * parent guids have to be identical ...
    if gt_itmadm-parent <> w_itmadm-parent.
      perform abort.
    endif.
    Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
    In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
    We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
    Any suggestions would be greatly appreciated.
    Thanks!
    Best regards,
    Kwong How

    Hi Janu,
    For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
    We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
    Otherwise, we will raise a message as suggested.
    Thank you so much for your help!
    Best regards,
    Kwong How

  • Getting error as Buffer table not up to date

    Hi SRM gurus,
    We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
    Note
    The following error text was processed in the system  : Buffer table not up to date
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Function: BBP_PD_ABORT of program SAPLBBP_PDH
    Form: ABORT of program SAPLBBP_PD
    Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
    Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
    Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
    Form: PROCDOC_CHECK of program SAPLBBP_PD
    Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
    Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
    Form: CHECK_PO of program SAPLBBP_PO_APP
    Form: PROCESS_EVENT of program SAPLBBP_PO_APP
    iN BBP_PD the status of this PO is as below.
    Stats:                                                          
                       Status            Description                             Inactiv
    HEADER     I1015          Awaiting Approval                      X      
    HEADER     I1021          Created                               
    HEADER     I1038          Complete                              
    HEADER     I1043          Ordered                               
    HEADER     I1080          In Transfer to Execution Syst.    X      
    HEADER     I1120          Change was Transmitted                
    HEADER     I1180          Document Completed                    
    0000000001 I1021          Created                               
    0000000002 I1021          Created      
    Please suggest / advice on this.              
    Thanks & Regards
    Psamp1

    Hi
    It is difficult to diagnoise the issue
    Note 1180477 - PO processing terminates with buffering table error
    see the symptoms in the note
    Symptom
    You have opened a purchase order using "Process Purchase Order" (BBP_POC). You change some data of this purchase order and then choose "Output" at header level. The system may display error message BBP_PD 001 "Buffer table not up to date", and an entry "UNCAUGHT_EXCEPTION" , "CX_BBP_PD_ABORT" is in transaction ST22
    Try to recreate the same issue in develpoment and make ensure that which data is causing this issue.
    What is the status of PO ? any archiving done recently on this PO or any data changes in the PO check history to know more information
    check SRM-EBP-POR for more related notes. you need to identify which data is causing thie issue
    Muthu

  • Getting error as Buffer table not up to date while checking EBP order

    Hi SRM gurus,
    We have one order which is created in the EBP side and the same is replicated in the backend also. Also confirmations and invoices are posted for this local PO. These confirmations and invoices are also carried over to backend. However very recently when we open this order in EBP and when we click either check button (or) change button we get the error indicating that Buffer table not up to date. I have pasted the error message below. We have also checked the ST22 and observed that exception occurred CX_BBP_PD_ABORT and is not caught any where. When do not have any issues with other orders. We have checked the recent changes and we could not observe any recent changes to the order.
    Note
    The following error text was processed in the system : Buffer table not up to date
    The error occurred on the application server bprapz36_SP1_08 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Function: BBP_PD_ABORT of program SAPLBBP_PDH
    Form: ABORT of program SAPLBBP_PD
    Form: CHECK_VENDOR_ERS of program SAPLBBP_PD
    Form: HEADER_CROSS_CHECKS of program SAPLBBP_PD
    Form: PROCDOC_DB_CHECK of program SAPLBBP_PD
    Form: PROCDOC_CHECK of program SAPLBBP_PD
    Function: BBP_PROCDOC_CHECK of program SAPLBBP_PD
    Function: BBP_PD_PO_CHECK of program SAPLBBP_PD_PO
    Form: CHECK_PO of program SAPLBBP_PO_APP
    Form: PROCESS_EVENT of program SAPLBBP_PO_APP
    iN BBP_PD the status of this PO is as below.
    Stats:                                                          
                       Status            Description                             Inactiv
    HEADER     I1015          Awaiting Approval                      X      
    HEADER     I1021          Created                               
    HEADER     I1038          Complete                              
    HEADER     I1043          Ordered                               
    HEADER     I1080          In Transfer to Execution Syst.    X      
    HEADER     I1120          Change was Transmitted                
    HEADER     I1180          Document Completed                    
    0000000001 I1021          Created                               
    0000000002 I1021          Created      
    Please suggest / advice on this.              
    Thanks & Regards
    Psamp1

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Buffer table not up to date - Bid invitation error

    Hi All,
    Please help me immediately. Kindly let me know what should I update in PPOMA. I encounter this error everytime I try to open the bid invitation in SRM. Please help immediately. Please
    Buffer table not up to date
        Message no. BBP_PD001
    Diagnosis
        In FUNC BBP_PDORG_GETDETAIL (function group SAPLBBP_PDORG) an
        inconsistent status was discovered.
    Procedure
        Start the transaction again. If the error occurs again, create an OSS
        message.
        To analyze the error, you can set a breakpoint in the function module
        'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.

    check the consistency of the user who is trying to open the bid invitation. Give sap_all and test if this works,  to isolate any authorization issues.
    regards
    velu

  • Buffer table not up to date in SUS

    Hello All,
    While I am trying to process Purchase order in SUS portal, when i try to confirm the Item, it is giving me error
    "Buffer table not up to date".
    Any idea about this problem?
    Thanks,
    Hetal

    We're having the same problem. Any word on how to resolve. It states also that its a BSP error in that it would not load the BSP page because of the buffer error. I tried using T_Code SWU_OBUF to perform the synchronization process, and still had no luck. Any help would be appeciared.
    JD

  • Buffer table not up to date - Create Model Service Specifications

    Hello, when our user try to create Model Service Specifications in tr. ML10 the following error message is arised:
    "Buffer table not up to date"
    Message no. SE001
    Diagnosis
    An internal error has occurred.
    Procedure
    Exit the function and then reinvoke it.
    If the error should reoccur, please contact your system administrator."
    I cannot any suitable sap notes. Our SAP system is ERP 2005.
    Please advice something.

    Hi Igor ,
    Please check following link which may help you..
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-se001-buffer-table-not-up-to-date-2524832?cv=expanded
    Regards,
    Kiran M
    Edited by: Kiran Madhu on Feb 18, 2009 10:25 PM

Maybe you are looking for