Buffering Problem?

9-10 seconds into every song, it appears there is a buffering problem as the song doesn't really skip as much as it garbles. I have updated audio drivers, Active X, deselected sound enhancer, tried small-med-large streaming buffer size, removed Musicmatch and disabled WMP playback. If anything, the problem intensified after installing updates? Any feedback?
Compaq Presario 2200 Laptop Windows XP Celeron Mobile

me too. i've had this problem for several months, since version 5, nothing has worked...

Similar Messages

Some layers in Photoshop cannot be seen, is this a buffering problem?

Some layers in Photoshop cannot be seen, is this a buffering problem?

Maybe these layers' visibility has been disabled. That'll be the case if there's a space where there normally is an eye to the left of a layer name in Layers panel. Click the space/eye to toggle visibility.

MIRO document Number range buffering problem

Dear all,
My MIRO document number is not following the sequence. if my first 5 numbers come in a sequence, then the next 5 numbers are not coming in between. Instead, the next 5 numbers are coming. It might be due to number range buffering problem. How to find the number range object for MIRO document number range?
How to solve this?
Please suggest.
I will award full points.
Thanks & Regards,
AR

Hii,
You can search the Number Range object in T-Code: SNRO
The Number Range object for Invoice document is RE_BELEG
Go the Change Mode of the Number Range Object in SNRO, remove the No of Numbers of Buffers (by default it will be 10).
This will resolve your issue.
Regards,
Kumar

Buffering Problems on FP 10.1

I have problems viewing video on Yahoo! Video may run for 5 - 10 seconds, and then buffer for 5-10 seconds.
Windows 7 64 bit operating system
IE 8.0.7600.16358, (I open it in the 32 bit session)
FP WIN 10,1,53,64
ATI Radeon HD 4650 4GB video card.
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz CPU 9 GB RAM.
Internet Speed
Download 2.74 Mb/s (SPEEDTEST.NET)
Upload0.85 Mb/s (SPEEDTEST.NET)
Ping 28 MS (SPEEDTEST.NET)
Connection Speed 104.5 Kbps (CNET)
I have disabled the hardware acceleration.
I upgraded my video driver.
Can you help me determine why I have buffering problems?
Thanks,
Don

Hi, Does this happen after you have restarted your system?
Do both of your browsers see the Flash logo animation here? If so then Flash Player is working correctly. I don't use Tree so am not familiar with it. Perhaps someone else will post to your thread with more info.
http://www.adobe.com/software/flash/about/
Thanks,
eidnolb

Audio Buffering problem

Hi,
I am trying play a real time audio received from server. I am using custom DataSource and sourcestream to cretae player and I observed that the when the data is given to the player through the read method player is not playing the data until it reaches 2 secs(approx). Is there any to avoid this buffering?
Other observations are when the data is played from a input stream it playing iwthout any buffering. So, i it a bug or behavior? Please confirm so that we can decide on the way forward.
Thanks
Raghava Reddy

Downloaded the free 900+mb Grey's Anatomy season
finale.
Have many other video's from iTunes, most paid for.
They play fine, no out of sync, no apparent video
buffering problem.
This episode is, audio wise, out of sync with the
video output and the video seems as if it is
skipping, or buffering making a distorted, skipping
video.
Very hard to digest.
I set all components (updated DirectX, Disabled 3D,
set GDI only, in system made sure DMA is on, etc.)
and since all other iTunes' video's play back
fine, I am wondering what else there may be to do
short of redownloading the vidoe which I may not be
able to do.
HP Ze 4230
Pavilion/ Notebook Windows XP O/S XP
Home, Sp 2, Itunes 7.0.0.7; 40 GB HDD, 1.83 Ghz, 512
RAM, external 250 GB HDD,
FOLLOW UP.................
I also regressed to iTunes 6.0.5 to determine that the 900+ mb m4v file for Greys Anatomy seems in fact corrupted.
Other iTunes tv shows play fine in both version 7 and 6.0.5.
Grey's Anatomy video stutters and the voice is out of sync with the video.
What is left for me to do?
Apparently I can not re download the m4v file as only one download is allowed. And it took several hours to download...
HELP!!!!!!!!!!!!!
Thanks in advance,
Robert
HP Ze 4230 Pavilion/ Notebook Windows XP O/S XP Home, Sp 2, Itunes 7.0, 40 GB HDD, 1.83 Ghz, 512 RAM, external 250 GB HDD,
HP Ze 4230 Pavilion/ Notebook Windows XP O/S XP Home, Sp 2, Itunes 7.0, 40 GB HDD, 1.83 Ghz, 512 RAM, external 250 GB HDD,

Severe buffering problems when streaming

In the past couple of days, I have begun experiencing severe buffering problems when streaming video on the web. The video plays for like 6 seconds and then it pauses for like 6 seconds and continues this pattern over and over. This problem occurs regardless of which web browser I am using. I know the problem is not caused by the internet connection because I did a speed test and it is currently operating at 12mbps. I have tried streaming video on another computer and it worked fine.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

How To Fix Slow Youtube Youtube Bufferring problem.

Recently youtube online streaming video is running very slow even in 240p,what is the problem.I am currently using latest adobe flash player 11.6.602.180 with Google Chrome Browser.My bandwith is 4mpbs,how to fix slow video buffering,need help.

I'm having the same buffering problems with ver 11.6.602.180.
Just tried again during the same time of day.
Backed-out back to 11.6.602.171 and the problem no longer seems to exist.
I running Vista Home Premium SP2 32-bit on an HP Pavilion dv6500 notebook w/ 2 GB RAM.
AMD Athlon 64 X2 Dual core processor TK-55 1.80 GHz
Firefox browser 19.0.2

Buffering problem with itunes 11.0.1 (Mac)

i've a buffering problem with the neue itunes 11.0.1. the voice is like a robot voice every 15 seconde. I cannot find the buffering configuration. do someone have a idea ? thanx a lot

Why is this Itunes such a pile of junk? If I restart my computer I can sometimes find the recently added music in my Itunes Library.
It would be nice to know if other people are having the same problems.

Lovefilm buffering problem

Hi – can anyone help me please? I had BT Infinity 2 unlimited installed about two weeks ago and it’s great for internet surfing as I’m getting an average of 20 - 30mbps. However when I watch Lovefilm on my Sony blu-ray player I’m getting buffering problems. The player displays the amount of mbps and it seems to go up and down wildly – from 30mbps down to about 0.5 when everything grinds to a halt. After a short time the mbps rate goes up and the film continues. It only happens during busy times, with Sunday afternoon/evening being the worst. I’ve tried using an ethernet cable to connect to the home hub but that hasn’t really helped, nor has switching it (the hub) off and on again. A friend has suggested buying a better router but I would’ve thought the BT kit would be ok. Any help/advice appreciated!

Thanks for the advice. The Glasnost test came back all clear and the details are here: http://loki09.mpi-sws.mpg.de//bb//glasnost.php?protocol1=FlashVideo&protocol2=control%20flow&port=80...
As you suggest, I'll try testing the download speed when the blu-ray player slows down to see if it's the player itself that's causing the issue - though I've checked the firmware and everything is up to date.

VMS Client Channel Buffering Problem

I just received my new Verizon VMS system which includes 2 client units. I hooked everything up and all was working as it should except that when watching live TV on the two client units, it will not buffer two different TV channels and allow me to switch back and forth between these two channels and rewind, fast forward or pause. It will only buffer one channel and when I switch to another, the original channels buffer is gone. I could do this on all three of my standard HD DVR boxes before swithcing to the VMS and this was a huge feature for me as I like to watch multiple shows or sporting events simultaneaously. I called support and after about 90 minutes they could find no problem or find any solution other then to send me a new VMS. The odd thing is when they looked at all of the tuners being used, tuners 3 annd 4 were never getting used. The odder thing is that it seemed to work properly on one of the client boxes until they did a cold init and then that one also stopped allowing 2 channels to be buffered.
Should I be able to buffer two seperate channels on the client boxes as well as the main VMS box or did they for some awful reasone take this feature away from the clients??
Thanks,
Eric

DOES VMS DO THESE THINGS FOR YOU ?
VZ VMS1100 Video Media Server
From Pg of 2 of Manual
The VMS1100 provides the following advanced functionality:
• Whole home DVR support for up to four connected IP Client set-top boxes
• Authorization and purchase of on-demand programming
• High-Definition television (HDTV) video decoding
• HDTV output through component video (YPbPr) or High-Definition Multimedia Interface™ (HDMI™)
• Surround-sound audio through a variety of analog and digital interconnection options
Live playback and LOD buffering capabilities to pause and time shift live video and seamlessly record for
all connected televisions
• Built-in MoCA 1.1/2.0 HW support
As with all ARRIS digital set-tops, the hardware features are enabled by core operating and third-party
application software.
Tom
Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
Data Object 39.45

I can help with a buffering problem in a video-based eLearning..

Hello,
I hope I can give a little back here for once. : ) I have a video-based eLearning that is hosted on a LMS that has been giving the users with low bandwidth a lot of problems. I was doing some testing with Chrome Dev Tools today, and I think I find some info that could be of use to some people. The eLearning is hosted on Moodle.
Here is what I found :
Contrary to what I believed, the Chrome browser (and it is probably the same with other browsers) will not download all of the files, or at least not all of the video files in a SCORM packet without the user first interacting with that video in some way. As you see in the graphic, I first arrived at the intro video shortly before 2.5 minutes, and only then did the browser begin downloading this video.
At about three minutes, see red line, I used the forward button to jump to the next video, and because the browser was not yet finished downloading the intro video, it was downloading two simultaneously. This is when I started experiencing a buffering issue.
A few seconds later, I used the slider in the progress bar to move to the 4th video, see blue bar, which "set off" the third video as well. At this point my browser was trying to download four videos at once, which caused major buffering issues.
This means, however, that jumping around an eLearning with several videos in it, even using the TOC or forward and backward buttons will cause all of the videos you "touch" to begin downloading, and if you have low bandwidth, they can be downloading simultaneously for a long time.
Possible solution --> Allow navigation only with with TOC and make it so the user can only go to the next slide/video after he has finished viewing the current one, ensuring,that only one video will be downloaded at once. (Needs to be tested).
Anyway, I hope this has provided some insight to those experiencing problems similar to this!

Under the advanced tab in the button inspector you can set it to activate your subtitle stream.

Buffering Problem with Flash Videos

We are having problems with the buffering of newly published FLASH videos (rendered using Premiere/Flash CS6 and using Windows 8 and explorer/firefox/chorme). Non-Flash Videos appear to buffer fine.
An example of this problem can be seen at http://healthwatchusa.org/HWUSA-Presentations-Testimony/20130215-KY-House/20130214-kavanag h.htm

1.Default of bufferTime is 0.1 seconds. Try to set the value higher and see if that solves your problem.
2.If you set your component to autoplay, you could get rid of it and start the player if the VideoEvent.READY is fired
3.If you have any code inside your swf that tries to communicate with other domains you should set the "allowScriptAccess" value inside your html container from "sameDomain" to "always"

Buffering problem on Apple TV

On my iTouch, I have 3 exercise bike workouts. All 3 play perfectly on my computer and my iTouch. However, only 2 of them play all the way through on Apple TV. The third one starts to play, and then every few minutes stops and starts buffering for awhile and that little circle keeps spinning and spinning around for several seconds or sometimes several minutes. I can't figure out why 2 workouts play fine, and the third is a problem only on Apple TV. Any suggestions would be most appreciated.

You used to be able to browse the whole store, this is a new problem I've read posts it's affecting US Canada and Europe. Hope they fix it quick.

IMac Buffering Problems

Recently my iMac has started to have problems with videos because it never used to buffer but now all it does is take it's time buffering videos, does anyone know how to fix this problem?

Contact your ISP. You need to confirm that the problem is not coming from their end.
Results of the speed test?

:S Table Buffering Problems

Hi I am brand new to SAP/ABAP and I am struggling to get rid of a warning I get for a piece of code. Any help would be much appreciated.
Cost Center Cutback object has warnings performance check: (1). <b>Generically Buffered Key Area for Table CSKS not Completely.</b>
Here is the code the warning is pointing to
SELECT kokrs kostl INTO TABLE gs_cskskey FROM csks
         WHERE bukrs EQ gs_key_costcut-bukrs
         AND    kokrs IN gr_kokrs
         AND    kostl IN gr_kostl
         AND    bukrs IN gr_bukrs.
Is the problem here that the table buffer is not getting properly filled for some reason???

James,
Your table is Generic buffering table. If you read a record from a generically buffered table, all records whose the left-justified part of the key corresponds to that of this record (generic key fields) are loaded into the buffer.
This left-justified part of the key is determined in this field by entering a number n of key fields. The first n key fields of the table are thus the generic key fields.
The number entered must be between 1 and key field number -1. For example, for a table with 6 key fields, only values between 1 and 5 are allowed.
The value to be entered should be selected so that the generic areas, that is, the set of records corresponding to a record in the generic key fields are not too small.
This you can see at SE11==> Table name ==> Technical settings. There you can find one field called no of key fields there.
One ways is
Go to Change mode and change this you can avoid this warning.
Second way is
Try to pick all the key fields in seelction. ie KOKRS,KOSTL, DATBI. I believe this way you can avoid this warning.
Rgds,
TM.
Please mark points if helpful.

Buffering Problem?

Similar Messages

Maybe you are looking for