Buffering video downlowds via Quicktime, when using a HSDPA USB modem.

Hi,
Does any one else experience very poor streaming performance via Quicktime, when using a HSDPA USB modem. Every time, when using the Quicktime player and receiving data via a HSDPA USB modem, there seems to be minimal buffering of that data, so that the video quality is extremely pixelated and virtually unwatchable; are there settings that can be altered to correct this problem? This issue seems to be so petty, yet Apple is unable to offer a solution? That doesn't seem right?
Regards,
mike_biz

Is this a file that Quicktime PRO is not able to open?
Yes. Your camera's native video format is MPEG-4 and appears to possibly be "muxed" with MP3 audio.
If not, is there anyway that I can convert this file to one that I can use on my Mac?
Try installing the free Flip4Mac component. Then try playing the .asf file in the QT Player.
Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO?
If your file plays using the Flip4Mac player component, you may then wish to consider purchasing full conversion codec which will allow you to export your DXG-305V files to any frame-to-frame synchronized QT compatible format in QTPro.
ADDED: Sorry about the duplication, too slow with my response.

Similar Messages

My mac wont send emails from yahoo or any other websites when using an external USB modem!

My mac wont send emails from yahoo or any other websites when using an external USB modem! I have checked the settings and they seem correct. Can anyone help? I do not have snow leopard. I can log on my email accounts, open my incoming emails (with difficulty coz it asks me to "try again" ) but I can never send emails, I always get: "sending is taking a little long, try again".
What is the problem? this is a hair puller !!!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

How do i get my hp pavillion dm1 to print on my wireless printer when using t-mobile usb broadband

how do i get my hp pavillion dm1 to print on my wireless printer when using t-obile usb external broadband

Mama Shirley, sounds like you are looking for information on networking your printer. I have to unfortunately inform you that you are not going to likely be able to do that with a mobile hotspot (which appears to be your source of broadband). This is because that card provides your devices with a roaming IP address which is subject to change, because of this it cannot create a stable network for the printer to communicate across.
My recommendation would be to purchase a router and connect the printer through that router. As a note you do NOT have to connect the router to broadband to create a network for your devices. It will simply provide you with an internal network for your devices.
Let me know if this is the information you are looking for or if there is still more assistance I can offer.
-Spencer
PS I hope you are having a lovely week and that the weather is as wonderful where you are as it is here!

When use the my usb it says disk not ejected properly

when use the my usb it says disk not ejected properly?

that just means you didnt take out the usb properly, always before you take out a usb, right click it and press reject. the usb icon should go away from your desktop, now its ok to take out your USB.

Best way to patch QuickTime when using iTunes?

I'm wondering if anyone else has run across this issue...
I have installed iTunes which comes of course with Quicktime. I do a clean install of iTunes each time a new version is released as simply doing a patch install seems to mess up.
However I've noticed that with Quicktime when a new version is released if I download and install just Quicktime and install it, it can sometimes lead to problems with iTunes, I reckon as iTunes is expecting to find the version it installed as part of it's package but now has different files.
Has anyone else come across this issue and if so, how do you handle quicktime updates which seem to come out more frequently than iTunes updates?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

2011 MacBook Pro experiencing Kernel Panics when using iPhone 4 as modem

Recently purchased a custom MacBook Pro 15" with the upgraded 2.3 ghz quad core i7 processor. I immediately installed 8 GB of Ram and a 750GB 7200 speed HD from OWC when the unit arrived. All was well when testing from home, and had zero issues after using the Mac assistant to pull apps and user data from my old MBP, which I then sold on ebay.
Brought my new MBP to work, where I use my iPhone 4 (not jailbroken) to data share, using the personal hotspot. I connect the iPhone 4 to the MBP via USB, to keep the battery on the iPhone 4 charged.
While at work, I almost immediately started getting chain Kernel Panics on the new MBP. After hard powering down and restarting, the Kernel Panics would return at unpredictable intervals, sometimes an hour or more, sometimes within seconds of booting. I immediately suspected the RAM from OWC, as bad ram is the leading cause of Kernel Panics, according to a quick google search. So here is what I did in order, although keep in mind that this took place over a period of weeks, where I would intermittently go days w/out a Kernel Panic, and I was going crazy trying to figure this out.
1. Took apart machine and re-seated OWC Ram-did not fix
2. Attempted to confirm OWC RAM was bad before sending back to OWC, moved to step 3
3. Put Apple Hardware Test DVD in and let it run the extended hardware test in loop mode over a weekend (72 hours), with no report of any hardware failure
4. Some reports on the internet seemed to indicate the Apple Hardware test was not always reliable in discovering bad ram, so I purchased memtest, which I then looped and ran for 12 hours to test ram, with no report of failure.
5. Performed clean install of OS X 10.6 from Apple DVD, to include wiping the drive-Kernel Panics remained.
6. Removed OWC ram and installed Apple original Ram-Kernel Panics remained
7. Realized that at home I was on WiFi, and was not getting Kernel Panics (at least none that I could remember over the course of 2 weeks)
8. Tested w/ iPhone 4 connected via USB as personal Hot Spot, and Kernel Panics occurred regularly.
9. Tested w/ iPhone 4 connected via WiFi as personal Hot Spot, and Kernel Panics have not returned (running 6 hours so far w/out Kernel Panic)
At the beginning I had a Kensington Turbo Mouse connected as well, but over time I unplugged it to remove it from my troubleshooting list. At this point I must conclude that when using the iPhone 4 to data share over USB is the cause of my Kernel Panics.
All of the above was the long winded version of, my iPhone 4 is crashing my Mac. I just wanted interested parties to know what I've done already before suggestions are made.
Has anyone else experienced this issue? Anyone using their iPhone 4 to data share and connecting via USB w/out experiencing Kernel Panics? Anyone have any thoughts/ideas as to why this would occur?
FWIW, I've tried more than one USB cable to connect the iPhone to my MBP, and experienced Kernel Panics w/ both cables. I also fully restored my iPhone 4 when the recent 4.3 iOS update was released, so I don't think it's a software issue w/ the iPhone. I do not have a second iPhone 4 to test with, I also do not have a second Mac to test with.
Thanks up front for your thoughts and/or assistance.
Bill

Hi everyone !
I'm new on this forum (and French btw, so I apologize in advance for any mistake (: )
I've bought the brand new MBP 13' few weeks ago, and I kept having this problem until now, I just installed K64 Enabler, and it seems to work perfectly, so I wanted you all to know it
Thanks for all the help you brought me !
Hope Apple will fix this once for all !
See you !

How can I use 2 3g usb modems to increase internet speed (connection bonding)?

I live in Bolivia, which if you don't know has the worst internet on planet earth.. i.e. poorest reliability, availability, speed, most expensive, etc..
I currently have a couple of 4g usb modems (which have speeds way slower than 3g.. we're talking 1-200 kbs = ( )... I'm thinking I can probably bond them, or do somekind of proxy thing so that I can browse the web across both of the dongles.. I know that will not equal 2 times the speed.. but anything would help..
Hoping someone here has some ideas.
The modems are both HUWEI and I can connect them via the network preferences pane.
I know this is possible on ubuntu, but I don't really want to set up a linux server virtual or otherwise if I can avoid it.
Many thanks,
George

Hi and Welcome to the Forums!
There is no mechanism to do as you seek...tethering is one-way only.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using C7 as USB-modem under Windows 8.1 - connecti...

Hello there,
my girl-friend used her C7-00 as a wifi-tethering device until recently when she got her new computer that came with Windows 8.1.
Because 8.1 does not support WEP-Hotspot, I decided to hook up the phone using USB-cable and Nokia Suite. The connection goes alright, and she can surf through her C7 for a while, but then after 2 minutes approximately Nokia Suite says the connection has been dropped. This happens every time. Internet works perfectly on the phone.
Tried solutions: restarting phone, updating software, switching USB-modem mode, checking access-point configuration in Nokia Suite
Can anyone offer a suggestion on how to make this work ? Otherwise we will have to buy a new smartphone :-(.

Hi, sennerin.
Welcome to Nokia Support Discussions Forum!
Regarding your concern, Nokia Suite is not compatible with PC which runs Windows 8.1 OS. You can check the compatible Operating System of PC for Nokia Suite here: Nokia Suite. That is the reason why the connection is not that stable when using the phone as an internet modem.

WiFi solution using Telstra wireless USB modem

Having perused the many discussions concerning difficulties with wireless networking using OS X Lion, I now have little confidence as a new Mac owner in establishing such an internet connection unaided .
After much technical support, I come to realise that my current telstra USB modem (sierra wireless compass 885) being used with a pc laptop is not directly compatible with OS X 10.7.3.
My basic need is to have an internet connection on my Macbook and an ideal situation of being able to network with pc, Apple TV and possibly a backup device such as time capsule.
So, I figure my options are to either purchase a new compatible USB modem and router, or purchase a wifi router that will allow me to connect my Mac to the internet wirelessly through the existing pc connection.
Please advise on the viability of these options, insofar as the likelihood of establishing and maintaining such a network without the need for a fixed line ethernet ADSL type connection. Further to this, I would appreciate any recommendations for suitable modems and routers.

Do you need a modem because you have a dial-up ISP? There are several USB modems that work with Macs listed on Amazon. Just search for USB modems and you'll be able to find customer comments suggesting ones that work with Macs. There is a US Robotics on Amazon with reviews that say that it works with Lion -
http://www.amazon.com/USRobotics-USR5637-FaxModem-Windows-Linux/dp/B0013FDLM0/re f=sr_1_1?ie=UTF8&qid=1335769698&sr=8-1
If you have a DSL or cable modem, I would suggest in investing in a good wireless router so that you could connect all your computers. For Time Machine, I don't use the wireless drives that Apple sells, I just use a G-Drive Firewire drive. There are a lot of good outers on the market - I have a LinkSys (Cisco) that I bought a couple of years ago that is a great little 4-port router. Try http://home.cisco.com/en-us/home for a selection of good routers (others here may have other brand preferences, but Cisco has always worked well for me with minimum set-up required).
More specifics would help - what Mac you have, if your ISP is dial-up, DSL or cable, etc.
Clinton

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

No Audio via Blackmagic when using Blackmagic Sequence Presets

Hallo Everyone,
I'm using Premiere 5 on Win7/64Bit with a Blackmagic Decklink using the latest drivers (10.3.1).
When i use the Blackmagic Sequence Presets, i have perfect video but no audio. When I'm scrubbing through the timeline, i can see the Audio meters showing a signal, but when i press play, there is no audio visible and audible. The clips definitely contain audio, i also tried it with the testtone generated by Premiere.
When i make a new sequence (in the same project) and using other presets (non Blackmagic-Presets), then i have audio, but no video (which is clear to me). Audio out via Blackmagic is also working in any other Windows Software.
I reinstalled the Production Premium Bundle and reinstalled the Blackmagic drivers afterwards, but nothing helped.
I appreciate any suggestions.
Regards
Peter

These are my settings:

Fans run watching video, but don't when using Safari

I am curious as to why the silverlight plugin ramps the fans up (3k+ rpm) when I am watching prime video's in Firefox, but when watching the same video's in Safari, the fans a pretty much the standard 2000 (2k - 1.5k) rpm.
Happens with youtube too. Safari and web videos is way quieter and I guess I just don't understand why the difference.
Is there a way to get FF to throw a little less power at these video's so as to not light the fans off so much? It can really drown out the video audio depending on what it is. As it is, I use Safari for watching video's, but hate having to have 2 browsers open.

Well, I was just into my macbook not long ago changing out the battery and the key board. The back light stopped working on mine in places.
Either way, I know its clean, because I actually had the opportunity to check it.
I have XRG 1.7.3 that I use to watch the temps and stuff like fan speed.
Safari running the videos uses a good amount of CPU (~70% - 90%) and CPU die temp of 71C, where Firefox will run the CPU clear up to the 150%+ range and a die temp of 85+C.
The second I stop the video, I see the case temps (sensor1,2,3) start to drop pretty quickly. Is there a different version of Silverlight for firefox that is different from Safari's? I'm stuck with Silverlight for the Amazon Prime stuff.
Pretty much, video in Firefox sends the case temps to somewhere around 39-42C, nothing crazy, but with the die temps, enough to kick the fans up to the 3500-4000 rpm range watching the videos.
Safari on the other had shows case temps around 30-32C and fans that sit steady at 1999- 2048 rpm watching the videos.

Video faster than audio when use Adobe Media Encoder to convert f4v to mp4

I am using Adobe Captivate 5 on a mac record a demonstration, and I have published my project to .f4v. Now I am using Adobe Media encoder to convert the .f4v file to .mp4 (to play on an ipod). The output LOOKS good, but the video is running much faster than the audio. To be clear, the audio is running at the correct pace, but the video is going by much too quickly.

From Captivate, I tried changing the fps to a variety of speeds (12, 20, 30, 40, 60) when publishing to f4v. Then in Adobe Media Encoder, when I converted to mp4, I tried keeping the fps the same as the source f4v, reducing it, or increasing it. After all these experiments, I found that changing the fps in Adobe Media Encoder had no effect at all. Only changing the fps in the source f4v had an effect. Reducing it to 12 made the probelm worse (the video went by even faster), and increasing it as high as 60 made a SLIGHT improvement, but not enough to get things in sync. Changing the key frame distance in AME had no effect.

Buffering video downlowds via Quicktime, when using a HSDPA USB modem.

Similar Messages

Maybe you are looking for