Bug 3.1: Layout of "Pagination for this page/print friendly" checkboxes
Hi,
looks like that my entry in the 3.1 feedback application has been overlooked because the production version still shows a layout issue in the builder.
On the Edit Navigation Bar Entry (4308) and the Create/Edit Breadcrumb Entry (290) page the layout of the "Pagination for this page/print friendly" checkboxes is screwed up a little bit.
Patrick
My APEX Blog: http://www.inside-oracle-apex.com/
The APEX Builder Plugin: http://builderplugin.oracleapex.info/ New
The ApexLib Framework: http://apexlib.sourceforge.net/
Hi Arie,
I thought about the same.
Yes, I really enjoyed my vacation! :-)
Patrick
My APEX Blog: http://inside-apex.blogspot.com/
The APEX Builder Plugin: http://builderplugin.oracleapex.info/ New
The ApexLib Framework: http://apexlib.sourceforge.net/
Similar Messages
-
The security validation for this page is invalid – Infopath 2010
Hello Experts,
I have created browser enabled Infopath form and written a custom code (infopath 2010). I have a “Save” button on a form that submits the data into multiple relational sharepoint list. While debugging through VSTA everything goes well and successfully submits
the data, but after publishing a form(browser enabled) I am not able to save a data to sharepoint list. When I Clicked on save button, it just refreshing a page, even the same was getting after
made it to full trust and approved by Admin.
Before this I was using “Submit” button to submit a form, that time I was getting a popup with the message “There has been an error while processing the form”. And in log files it was showing error message as “The security validation
for this page is invalid”.
I referred many blogs regarding validation error and tried almost everything in every way, some of shortly mentioned below,
Formdigest (It not works for me)
Security Validation (It works perfectly)
The second option is working for me. (But this is not a good practice and also not recommended)
Just want to know “Without making Security Validation Off” how can I resolved this validation issue from infopath 2010 form.
Please share your thoughts on this. Any help is appreciated.
Regards,
UdayHi Uday,
Have you tried SPWebapplication.FormDigestSettings.Enabled = false to turn off the digest setting property for the web application? See this blog for the details.
http://ktskumar.wordpress.com/2009/03/09/the-security-validation-for-this-page-is-invalid-click-back-in-your-web-browser-refresh-the-page-and-try-your-operation-again/
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support -
Autofill in Google Toolbar does not appear to be working with Firefox 4 - It aways gives the message "Autofill not available for this page". This is happening on pages I have used Autofill on before upgrading to FF4 from Firefox 3.5.x
i did not see a solution posted - I tired what I read. Going back to an old version may solve the problem but it is a stupid solution so I have yet to do that.
I am on version 4 and autofil this does not work :
Popular answer Go to this answer
Uninstall version 5, then Google "google toolbar version 4", follow the link to FileHippo.com, and download and install the last version 4. When you reinstall it, make sure you turn off the option to perform automatic updates.
6 of 7 people found this answer helpful. Did you? Sign in to vote. Report abuse -
JavaScript - Error: The security validation for this page is invalid...
Hi there,
I have a question regarding javascript and the security validation.
I have created a custom action for a document library. This custom action should update a field in all selected documents by the user. But when I do the update, I got this error message:
"The security validation for this page is invalid. Click Back in your Web browser, refresh the page, and try your operation again."
I know, I could AllowUnsafeUpdates, if I were using C#, but actually I can only use JavaScript at this stage. Or does anybody know, how to allow this or switch to C# in this area?
Here is my custom action:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Id="GrolmansJavaScriptFile"
ScriptSrc="~site/_layouts/SharePoint-Z-Drive-Project/gg1855.js"
Location="ScriptLink">
</CustomAction>
<CustomAction
Description="Approve Documents"
Title="Approve Documents"
Id="RibbonDocumentsManageApproveDocuments"
Location="CommandUI.Ribbon"
RegistrationId="10000"
RegistrationType="List"
Sequence="0"
xmlns="http://schemas.microsoft.com/sharepoint/">
<CommandUIExtension xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Define the (UI) button to be used for this custom action -->
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Documents.Manage.Controls._children">
<Button Id="Ribbon.Documents.Manage.ApproveDocuments"
Command="{4E2F5DC0-FE2C-4466-BB2D-3ED0D1917763}"
Image32by32="~site/_layouts/Images/SharePoint-Z-Drive-Project/approve_document_32x32.png"
Image16by16="~site/_layouts/Images/SharePoint-Z-Drive-Project/approve_document_16x16.png"
Sequence="0"
LabelText="Approve Documents"
Description="Approve Documents"
TemplateAlias="o1" />
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<!-- Define the action expected on the button click -->
<CommandUIHandler Command="{4E2F5DC0-FE2C-4466-BB2D-3ED0D1917763}" CommandAction="javascript:void(ApproveDocuments());" />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>
And here is my JavaScript code file:
function ApproveDocuments()
var siteUrl = '/';
var clientContext = new SP.ClientContext(siteUrl);
var currentlibid = SP.ListOperation.Selection.getSelectedList();
var currentLib = clientContext.get_web().get_lists().getById(currentlibid); //Gets the current Library
var selectedItems = SP.ListOperation.Selection.getSelectedItems(clientContext);
for (var i in selectedItems) {
currentLib.getItemById(selectedItems[i].id).set_item('DocumentStatus', 'Approved');
currentLib.getItemById(selectedItems[i].id).update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
function onQuerySucceeded()
alert('Document approved:' + newListItem.get_id());
function onQueryFailed(sender, args)
alert('Document approval failed: ' + args.get_message() + '\n' + args.get_stackTrace());
Any idea, how to perform the update on the selected items?
Thanks for any hint.
DennisOk, I found the reason.
I just had to replace the SP.ClientContext line in JavaScript.
Instead of
var clientContext = new SP.ClientContext(siteUrl);
I need to use this one:
var clientContext = SP.ClientContext.get_current();
Dennis -
The JavaScript for this page failed to load correctly. Always on shutterfly.
I'm trying to view photo albums on shutterfly and always get the following error. "The JavaScript for this page failed to load correctly. "
Howdy there JohnB,
It sounds like you are unable to access your Shuttefly due to a JavaScript issue in Safari. I would start by checking to see if JavaScript is enabled in the Preferences.
Enable JavaScript
JavaScript is a software technology that allows some buttons, online forms, and other webpage content to work properly. To block JavaScript, deselect this checkbox.
Note: Disabling JavaScript can cause many sites not to work properly.
From: Safari 6 (OS X Mountain Lion): Security preferences
http://support.apple.com/kb/PH11886
Thank you for using Apple Support Communities.
All the very best,
Sterling -
The JavaScript for this page failed to load correctly
I keep getting this message "The JavaScript for this page failed to load correctly" when I try to access my Shutterfly accounts.
This is a new problem since upgrading to Mavericks. It does not happen on my Macbook Pro running Mavericks.
JohnHowdy there JohnB,
It sounds like you are unable to access your Shuttefly due to a JavaScript issue in Safari. I would start by checking to see if JavaScript is enabled in the Preferences.
Enable JavaScript
JavaScript is a software technology that allows some buttons, online forms, and other webpage content to work properly. To block JavaScript, deselect this checkbox.
Note: Disabling JavaScript can cause many sites not to work properly.
From: Safari 6 (OS X Mountain Lion): Security preferences
http://support.apple.com/kb/PH11886
Thank you for using Apple Support Communities.
All the very best,
Sterling -
An error occurred while applying your dashboard selections for this page???
Hi there,
I'm getting this error on the dashboard page.
"An error occurred while applying your dashboard selections for this page" Error Codes: GV3MWW29
It is removed when I click "Clear my selection" from page option.
Is there any other way to remove the error without clicking "Clear My selction" everytime.
ThanksHave you saved your selections by selecting 'Saved Current Selections'? When do you get this error?
There are a few posts in this forum; here's one that may or may not help; take a look if you haven't already..
GV3MWW29 error
Thanks! -
SharePoint Error "The security validation for this page is invalid" when delete an item
Hi,
I have SharePoint 2010 setup and works fine until today all of a sudden it throws error "The security validation for this page is invalid" when delete a SharePoint document or list item.
There is no custom event handler deployed on library/list, and it should not be account issue as the same account works yesterday, and even after I turn off security validation from Central Admin, it still doesn't work.
The only change I did is turn off Dynamic Compression from IIS, after that I tried enable back Dynamic Compression but it still doesn't work.
Does anyone know what could be the possible reasons? Thanks in advance.hi,
in the page just try to make this :
<SharePoint:FormDigest runat="server" />
PrasadWT -
The security validation for this page is invalid
I am trying to declare items in doc library inside a specific folder as records. This is my code:
using (SPWeb site = SPContext.Current.Site.OpenWeb("myClassicSite")) {
site.AllowUnsafeUpdates = true;
SPList list = site.Lists.TryGetList(currentDocLibName);
SPFolder folder = list.GetItemById(foldId).Folder;
try {
SPDocumentLibrary doclib = (SPDocumentLibrary)site.Lists.TryGetList(currentDocLibName);
SPView defaultView = doclib.Views["my custom view"];
SPListItemCollection docColl = doclib.GetItemsInFolder(defaultView, folder);
foreach (SPListItem item in docColl) {
Records.DeclareItemAsRecord(item); // throws exception here
} catch (Exception) {
It throws exception: "The security validation for this page is invalid"
I just can't declare items as records, I tried RunwWithElevetedPriviledges, AllowUnsafeUpdate, and SPWebapplication.FormDigestSettings.Enabled = false;
What am I doing wrong?Have you tried adding SPUtility.ValidateFormDigest(); before the start of your code section? Have a look at the article below for more info on the same.
http://blogs.technet.com/b/meamcs/archive/2011/04/04/troubleshooting-sharepoint-error-the-security-validation-for-this-page-is-invalid.aspx
The problem should be originating because of the use of AllowUnsafeUpdates in your code above. Here is a good writeup on best practices when using AllowUnsafeUpdates in the code:
https://hristopavlov.wordpress.com/tag/formdigestsettings/
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question. -
I am unable to access my email from Charter.net. I can sign in with my password, then a message comes up which says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All of my plug-ins are enabled. What am I missing?
After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.
-
'The state information is invalid for this page and might be corrupted' error
An admin user added a 'widget' for internet content to be displayed on our intranet (sharepoint). Now, anytime I try to modify the page (it is still checked out) I get this error:
The state information is invalid for this page and might be corrupted.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: The state information is invalid for this page and might be corrupted.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[FormatException: Invalid character in a Base-64 string.]
System.Convert.FromBase64String(String s) +0
System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +67
System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4
System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37
System.Web.UI.HiddenFieldPageStatePersister.Load() +136
[ViewStateException: Invalid viewstate.
Client IP: 10.10.16.77
Port: 3996
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC LM 8; InfoPath.2) chromeframe/5.0.317.0
ViewState: /wEPDwUJLTY1NzY2ODU3D2QWAmYPZBYCZg9kFgQCAQ9kFgICBQ9kFgJmD2QWAgIBDxYCHhNQcmV2aW91c0NvbnRyb2xNb2RlCymIAU1pY3Jvc29mdC5TaGFyZVBvaW50LldlYkNvbnRyb2xzLlNQQ29udHJvbE1vZGUsIE1pY3Jvc29mdC5TaGFyZVBvaW50LCBWZXJzaW9uPTEyLjAuMC4wLCBDdWx0dXJlPW5ldXRyYWwsIFB1YmxpY0tleVRva2VuPTcxZTliY2UxMTFlOTQyOWMBZAIDD2QWDgIBD2QWAgUmZ18zYzI1NzczNl82NDAzXzQwNTlfYmE4Y19hODJjODE0YzMzOTAPDxYEHgxmaWx0ZXJzdHJpbmdlHg9vbGRmaWx0ZXJzdHJpbmdlZGQCAw9kFgICDw9kFgJmD2QWAgIDDxYCHgRUZXh0BQF8ZAIJD2QWBAIDD2QWAgIBD2QWAmYPZBYCAgEPD2QWAh4FY2xhc3MFGG1zLXNidGFibGUgbXMtc2J0YWJsZS1leGQCBQ9kFgJmD2QWBAICD2QWCAIBDxYCHgdWaXNpYmxlaGQCAw8WAh8FaGQCBQ8WAh8FaGQCBw9kFgJmDw8WBh4cUHJldmlvdXNBdXRob3JpbmdJdGVtVmVyc2lvbgUCMzAeGlByZXZpb3VzQXV0aG9yaW5nSXRlbU93bmVyBQExHhxQcmV2aW91c0F1dGhvcmluZ0NvbnRyb2xNb2RlCysEAWRkA...]
[HttpException (0x80004005): The state information is invalid for this page and might be corrupted.]
System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +267
System.Web.UI.HiddenFieldPageStatePersister.Load() +218
System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +83
System.Web.UI.Page.LoadAllState() +35
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +7350
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.WELCOMELINKS_ASPX__1775745042.ProcessRequest(HttpContext context) +4
Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context) +153
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +358
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Should I Publish it then re-check it out to edit or even restore to a prior version?Try one of the tips in these blog posts:
http://weblogs.asp.net/lduveau/archive/2007/04/17/viewstate-chunking-in-asp-net-2-0-maxpagestatefieldlength.aspx
http://delroger.wordpress.com/2008/08/19/invalid-character-in-a-base-64-string-aspnet/
I suspect that the webpart the user added is putting a large amount of data into the page's Viewstate.
Bryan Phillips
MCT, MCSD, MCDBA, MCSE
Microsoft MVP - SharePoint Services
Blog: http://bphillips76.spaces.live.com
Web Site: http://www.composablesystems.net -
Using SharePoint 2010 Server
I'm attempting to programtically update a managed metadata field in a document library. I'm able to do it without issue on all other non-managed metadata fields. When I attempt it on a MM field I get the error message
"The security validation for this page is invalid. Click Back in your Web browser, refresh the page, and try your operation again."
After some digging I realised that this error was being caused because SharePoint was trying to write to the TaxonomyHiddenList list (../sites/mysite/Lists/TaxonomyHiddenList/AllItems.aspx)
When I update a document through the browser with a term (Term01), it shows up in this TaxonomyHiddenList . I can then run my application, apply Term01 to my new document and it works fine. But if I apply Term02 to my new document it gives me the error above.
Summary
My app can read the TaxonomyHiddenList fine but it can not perform an operation that would write to it, resulting in not being able to update the MM field.
Question
Is there any advice on how I can further debug this issue?Hi,
According to your post, my understanding is that you want to update managed metadata field in document library programmatically.
I have made a simple code demo below to updata managed metadata field in document library, it works like a charm, you can refer to it.
public static void UpdateMSField()
using (SPSite site = new SPSite("http://YourSiteURL"))
using (SPWeb web = site.OpenWeb())
//SPList list = web.Lists.TryGetList("Libs_1");
SPDocumentLibrary lib = (SPDocumentLibrary)web.Lists["Libs_1"];
// No point in proceeding if we can't find the list
if (lib != null)
// add a new item
// SPListItem item = list.AddItem();
SPListItem item = lib.GetItemById(1);
//Console.WriteLine(item.Name);
// get the current taxonomy session, which wraps up all of the
// associated TermStore objects for this SPSite object
TaxonomySession metadataService = new TaxonomySession(site);
// get the taxonomy field
TaxonomyField taxField = item.Fields["MMS_1"] as TaxonomyField;
// get the term store associated with the taxonomy field
TermStore termStore = metadataService.TermStores[taxField.SspId];
// get the actual term set associated with the taxonomy field
TermSet termSet = termStore.GetTermSet(taxField.TermSetId);
// search for the terms we wish to set the field to
var terms = termSet.GetTerms("term_1", true, StringMatchOption.ExactMatch, 1, false);
// if we have found a term populate the field
if (terms.Count > 0)
// set the field to the term(s) we have found
taxField.SetFieldValue(item, terms.First());
// Update the item
item.Update();
Console.WriteLine("success...");
More reference:
http://www.3guysonsharepoint.com/?p=1052
http://vineet-winit.blogspot.com/2013/04/how-to-update-managed-metadata-field-in.html
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
== This happened ==
A few times a week
== Upgraded to 3.6.3.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
The state information is invalid for this page and might be corrupted.
Hi all,
I have a problem. I want replicate an effect "infity scroll". So I have an aspx page with inside an user control that load some row. When capture
scroll event I want to load another user control with some other rows.
This is correct for me, but when after load some other post I try to click on a button I have an error on viewstate.
Is there anyone that can help me?
This is my code.
$("#full").scroll(
function () {
if ($("#full").scrollTop() >= ($("#container").height() - $("#full").height() + 170) && $contentLoadTriggered
== false) {
$contentLoadTriggered = true;
$.ajax(
type: "POST",
url: "WebService.asmx/getValue",
data: '{ "prefixText": "' + $("#<%=elencoPostBacheca%>") + '" }',
contentType: "application/json; charset=utf-8",
dataType: "json",
async: true,
cache: true,
success: function (msg) {
$contentLoadTriggered = false;
$(".post").last().append("<table width='100%'><tr>" + msg.d + "</td</tr></table>");
error: function (x, e) {
[WebMethod(EnableSession = true)]
public string getValue(object prefixText)
using (Page page = new Page())
HtmlForm form = new HtmlForm();
// UserControl userControl = (UserControl)page.LoadControl("~/DynamicData/LoadMorePost.ascx");
UserControl userControl;
page.PreInit += new EventHandler((s, e) =>
userControl = (UserControl)page.LoadControl("~/DynamicData/LoadMorePost.ascx");
userControl.ID = "idControl1";
form.Controls.Add(userControl);
//form.Controls.Add(userControl);
using (StringWriter writer = new StringWriter())
page.Controls.Add(form);
try
HttpContext.Current.Server.Execute(page, writer, false);
catch (Exception err)
return "Error To Load Data";
return writer.ToString();
Thanks in advance..http://forums.asp.net/
Maybe, you'll wnat to post to the above forum. -
I want to deaccelerate flash and "click here for this page" don't get me there
i have been through the mozilla support and adobe flash support troubleshooting to DISABLE HARDWARE ACCELERATION in hope it will stop the adobe flash crashing.
having tried the other suggestions and found all ok, it is my last resort.
i cannot get to the settings menu on adobe site because it must need flash player to display....very frustrating.If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''
Maybe you are looking for
-
When I try to record narration, I get a message that says "Cannot record because one of the record-enabled tracks is locked in the timeline" Please help. Dave
-
HT1515 How can I logging and manage the content on Airport Express?
I want to logging to manage the content but I can't even see it but all my devices are connected and properly functioning.
-
I use my reminders all the time. I had 18 for today and now there are only 6--ones I had added previously that are overdue. There are no future reminders. I did not touch anything! And nothing I seem to do will get them back...
-
Log Reader Agent and Snapshot Agent wont start
Hi There, I've two SQL 2012 servers with multiple instances installed. I've started replicating the databases in these instances using transactional replication and thus far they've worked without a hitch. One of my instances, annoyingly, has an issu
-
'Use Memory Analysis' of WebiProcessing in HP-IA64
Hi. I have a question about 'Use Memory Analysis' option of WebiProcessingServer. According to Administrator's Guide, this option prevents memory curruption when BOE works as 32-bit application. (maxmum memory setting is limited to 2000MB) Then in my