Bug 3935860 - Any fix for Windows ?

Hi,
I have found that the Bug 3935860 was the root of our problem as mentioning in the Note:300232.1. I have upgrade to 9.0.4.2 but the error still happens.
Any patch so far ?
Pls advice.

You can see for yourself at metalink that the status is "Code Bug (Response/Resolution)". This means the fix is still under development. However the severity is set at "Minimal Loss of Service". A workaround is given (increase timeout). If this is not acceptable I would advise contacting Support to explain why you really need a fix.
You can ask them to raise the severity and if it really a showstopper you can ask to escalate the bug. Anyhow, this sort of detailed questions about bugs and fixes can better be asked at Oracle support (http://metalink.oracle.com) than in a public forum like this one on OTN.

Similar Messages

Any fix for touch pad issue in mac book pro on windows 7?

Hi, I've recently installed windows 7 and parallels in my mac book pro. While i run windows with the parallels track pad, scrolling and right click are functioning properly. But when i logon to windows directly none of them are functioning.
Pls lemme know if there is any fix for this.
Thanks

KiranJJ wrote:
Running Windows in parallels from the BootCamp partition messes the original installation. My experience. You will have to remove the parallels virtual machine from mac and did a complete reinstall of Windows later.It is better to keep your virtual machine separately.
This is not true. Running Bootcamped Windows from Parallels or Fusion does not impact the Bootcamp installation of Windows. It just provides a different access to the single Windows installation. Both Parallels and Fusion support this configuration and instructions for how to use Bootcamped Windows as the virtual machine's tartget operating system is included on each virtual machines's respective site.

Neo2 - Any fix for 'lost' memory?

On this board, I've read that it is normal for the BIOS to only see part of the memory if you have a lot installed. I've got 4x1GB installed, the BIOS reports a large number beginning with '3'; Windows System Properties says 3.25GB which works out pretty close in bytes to that reported by the BIOS. Is there any fix for this, since I'd like capable applications e.g. After Effects, running under XP x64 to have the option to access all the physical ram installed?

I would guess the history was lost when you consolidated your catalogs near the beginning of the process. Can you remember what steps you followed to consolidate the catalogs? There is no history if you have importing from image-embedded or sidecar metadata as that only contains the current state of the images, not all the steps followed to get there.
Most of the rest of what you talk about is a complicated discussion of why you don’t have any backups, which is interesting, but not relevant to the missing history, I don’t think.

The sound cuts out while a track is playing in iTunes. Are their any fixes for this?

The sound randomly cuts out while a track is playing in iTunes. The track has to be stopped and restarted before sound returns. Are their any fixes for this?

Hello there, smalltowngirl93.
The following Knowledge Base article offers up some great in-depth steps for troubleshooting audio not playing in iTunes or Quicktime:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Any fix for the "remembering passwords" problem with MAIL?

I've been following the other threads on this topic. I am a new Mac user (all of 5 days) with 10.5.2 preinstalled on a macbook pro, so this is not a migration problem. Applecare has been unable to resolve the issue. My setup is a Verizon FIOS POP account. I've tried all the repairing, creating keychain suggestions. My incoming and outgoing accounts function properly, then they mysteriously forget the login credentials. Is there any fix for this, this seems absurd coming from a PC background? Thanks.

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

MBR fix for Windows 7 thinkpads?

I really need to resolve this issue. My MBR is "broken" (restored to a non-lenovo stock Windows 7 MBR) and now all my lenovo software and a lot of my hardware's software won't work. e.g. Intel graphics control panel, lenovo system update, lenovo power manager, etc... While loading any of these, I get "<application name> has stopped working....".
Background:
I previously removed a dual boot of Fedora I installed. However, the grub boot loader remained and I wanted to get rid of it. Normally Lenovo's Rescue and Recovery can be used to restore the boot loader (and remove grub), but I couldn't load R&R nor install a newer version. From what I could understand from reading online, R&R required the lenovo boot loader installed to work properly so I couldn't use it to restore my boot loader - a classic Catch 22.
I decided to borrow a windows 7 CD to use the repair feature. It worked by restoring windows 7's boot loader. However, ever since I did this, a lot of the preinstalled applications I listed above do not work anymore. None of the lenovo software work for sure. I have tried to reinstall some with no luck.
My best guess is that I can't use Window's MBR, but instead need to restore Lenovo's MBR / bootloader. However, after a search online I found Lenovo only provides the MBR fix for windows XP and 2000, not 7.
Any suggestions?

Fixing the MBR shouldn't alter the functionality of programs, unless you've changed the drive letter somehow.
Reinstalling R&R within Windows should get it to work again, though.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Any fix for the PC based network printer communication issue with Mavericks?

Any fix for the PC based network printer communication issue with Mavericks?

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

After upgrade to Mavericks I have to shutdown using the power button. Any fix for this?

I have a mid 2011 iMac, just upgraded to OSX Mavericks. It will no longer shut down using the menu. I have to push and hold the power button. This sometimes results in a very loud "snap" from my machine. Tried reinstalling but still does the same. Any fix for this? If not, how do I redownload Mountain Lion?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
Emailed their tech support this evening describing problem.

When I open iTunes, I get a message that "iTunes has stopped working". I've tried reinstalling itunes, creating a new user file, changing the startup programs, and am having no success in getting iTunes to stay open. Any "fixes" for this problem?

When I open ITunes, I get a message that "iTunes has stopped working". I have tried reinstalling iTunes, creating a new user file, changing the startup programs in accordance with articles in iTunes troubleshooting, but am having no success in getting iTunes to stay open. Any fixes for this problem?

Are there any fixes for iPad 2 with OS 8.1.1.

Are there any fixes for the iPad 2 IOS 8.1.1? I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response. These problems have been occurring since the last update. At times the iPad becomes unusable. I have been keeping all programs closed and history and web site data cleared. Thanks for any help you can give.

Hi, dannilee,
I have exactly the same problem. The device was my favorite computer until 8.1.1. Now it runs s-l-o-w-l-y, requires endless reboots.
To improve the performamce, I have tried these:
1.Go to Setting->General->Accessibility->Reduce Motion. Turn on.
2.Reset iPad device settings using Setting->General->Reset->Reset All Settings. Its increase iPad performance little better.
3.Hold the sleep/wake button and home button upto 8 seconds. This will turn off your iPad. Then turn on iPad. Wait few moments. Do the same thing twice to solve this issue.
Solution 3 worked for me. And, I always recommend you to backup your iPad first before any action to avoid any data loss.
Hope it is useful for you.

Microsoft releases fix for Windows Update corruption errors

See ZDnet article Microsoft releases fix for Windows Update corruption errors found @
http://www.zdnet.com/microsoft-releases-fix-for-windows-update-corruption-errors-7000026582/
The Microsoft KB article is found @
http://support.microsoft.com/kb/947821
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Hi Rick,
Really thanks for your sharing.
This will definitly help others in this forum.
Kate Li
TechNet Community Support

HT2729 after downloading a tv show the words don't match the lips any fix for that?

After downloading a tv show the words don't match the lips, is there any fix for that?

Do you live in a country where you can redownload tv shows?
Learn more about which content types are supported for iTunes in the Cloud by country, as well as where iTunes Match is available.

I have an I Pad 1 with 64 gigs. It constantly drops me off the Internet for no apparent reason. Is there any fix for this problem?

My I Pad 1 constantly drops me off the Internet and programs. Is there any fix for this problem? It started after the last update and continues to get worse.
Doug

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Any fix for the kernel panic issue?

So far, i've had 12 kernel panics. Usually it only happens when I start iTunes or software update. I read in a developer forum it was because of the NVIDIA Graphics card. So, are there any fixes for the kernel panics with Lion?

There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

Bug 3935860 - Any fix for Windows ?

Similar Messages

Maybe you are looking for