BUG 6431982 - Any resolution yet??

Any Oracle guys here know if there is a fix available for this bug or whether one will be available soon?
I have the same issue with the CHR function but the bug is not public.
Thanks,
Dave

I wonder why this subject is getting little attention.
I feel like apple has crippled one of the most important functions of mail, and like the first post, I'm getting results out of chronological order. Some bright spark at apple that only has afew emails in the inbox of his test device decided that the best way to display results is with flagged messages first.
I happen to have a hundred thousand emails, and thousands of which have been flagged since at least 2007.
I pretty much can find an email sent to me yesterday, or the day before.

Similar Messages

  • I am having issues with my iphone6 bluetooth connection in my car.  When going to settings under bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution yet?

    I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class.  When going to settings under Bluetooth, it is unable to find any devices.  I did not have this issue until I downloaded IOS 8.0.2.  Do you know if there has been any resolution from Apple yet?

    Hi susan from WSL, 
    Welcome to the Apple Support Communities!
    I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article. 
    If you can’t use a Bluetooth accessory or car kit
    Cheers, 
    Joe

  • "Failed to FInd a Place" Imports - Any Resolution Yet?

    Like several others I have LR 2.3 Windows XP and i regularly get partial imports.  The error says that it  "Failed to Find a Place" so it skipped importing the rest of the images.
    HD and computer seem to be working fine.
    Sometimes I have to go back 3 or 4 times during an import just to make sure Ive got all the files.
    Search found no resolutions.
    Whats up with this?  Any fixes?
    Thanks
    Suzzie

    Same problem "Failed to find a  place for the imported file. (1) - then names the photo. The name of this photo is Kitchen Counter w/cookies 2011_1224_141116AA.jpg and it is on a network storage device (NAS) where many other photos are located and some have already been imported (previously) into the Catalog. I wonder if it is the name of the photo which has a forward slash (/) imbedded? Mac doesn't mind the name. But the error message that shows the file name changes the slash to a colon (:)
    During a second attempt, I went directly to the folder that contains the picture. That single picture shows a message: "Preview unavailable for this file". I checked that photo's checkbox for the import. The same, original, error message says it can't find a place for the file.
    So - I changed the name of the original file by removing the forward slash (/) and replacing it with a simple hyphen. Voila! - Now Lightroom sees and can import and display the picture in the catalog.

  • Any resolutions to the macbook audio problem?

    Is there any resolution to the mysterious sound device banishing until restarting your mac?

    it's definitely NOT the firmware update, as evidenced by the fact that i haven't installed either of the two recent firmware updates yet.
    see the discussion in the macbook PRO threads.
    they're sending me a new battery for free, and they'll do the same for you.
    this is happenning to so many mb's and mbp's that it's becoming an expensive issue for apple :o(.

  • Safari and Firefox both not loading any pages yet i am connected to the int

    Safari and Firefox both not loading any pages yet when i run diagnostics it says i am connected to the internet... any ideas???

    I am having the same problem. My airport says i'm connected with full bars but when i click on safari it takes a few minutes then says i'm not connected to the server. Now the kicker is i have a magicjack and you need internet to run it and that works fine... also i can access my itunes store which also requires internet. I can only run safari with the ethernet cable connected. That is how i'm connected now.. any ideas what it might be.. i have reset safari, emptied the cache, renewed the DHCP lease.. and all of the obvious... Please anyone help..oh p.s. my iphone picks up the wireless so it is working.. HELP......

  • HOWTO: Can't display any resolution above 640x480, or other crappy res

    I've been working on this problem for half the day, and finally figured it out after many hours of frustration. During my search for a solution, I've seen other people who had the same problem but was never resolved on these forums. Rather than bumping an old post, I've decided to create this "howto" hoping that someone experiencing the same problem may find this post.
    The problem is that Xorg refuses to display any resolution above the minimum, which is 640x480. This was the resolution in my case, and searching around, it's the resolution many other people experienced, as well, who experienced this same problem.
    Check your Xorg log in /var/log/Xorg.0.log . Search for "No valid modes for". If you see something like this, then you are experiencing the same problem I had:
    (WW) NVIDIA(0): No valid modes for "1680x1050"; removing.
    (WW) NVIDIA(0): No valid modes for "1024x768"; removing.
    (WW) NVIDIA(0): No valid modes for "800x600"; removing.
    (WW) NVIDIA(0): No valid modes for "640x480"; removing.
    (WW) NVIDIA(0):
    (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
    (WW) NVIDIA(0): "nvidia-auto-select".
    (WW) NVIDIA(0):
    In my case, this only occurred when I was using the nvidia driver (it went away when I just used nv).
    Ok, so here's how to solve the problem...
    Has your monitor worked with your machine before?
    If your monitor, graphics card, etc. has worked with your machine and xorg file in the past, and it suddenly stopped working without anything changing, then try rebooting your monitor. (I'm serious!) Log out, turn off your monitor, and unplug it for several seconds. Plug it back in and log back in. This ended up solving my problem, after I edited my xorg file (see below)... but just editing the xorg file and rebooting X wasn't enough
    If monitor rebooting didn't help, or you've never got your monitor/graphics card/xorg.conf working together in the past
    If this is the case, your xorg.conf probably isn't configured correctly. Assuming you already have a xorg.conf file (this post is NOT meant to replace the other howto's on how to configure your xorg file), here's the basic rundown of what your xorg file should have...
    Make sure that you have the "Modes" set in your Display subsection of Screen. Here's what my Screen section looks like:
    Section "Screen"
        Identifier     "Screen0"
        Device         "Card0"
        Monitor        "Monitor0"
        DefaultDepth   24
        SubSection     "Display"
            Depth      16
            Modes      "1680x1050" "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection     "Display"
            Depth      24
            Modes      "1680x1050" "1024x768" "800x600" "640x480"
        EndSubSection
    EndSection
    (the line(s) in bold are the ones you need to make sure you have)
    If this still doesn't work, make sure that you have the appropriate Modeline set. I chose to make a Modes section like this:
    Section "Modes"
        Identifier  "16:10"
        Modeline    "1680x1050 (GTF)" 154.20 1680 1712 2296 2328 1050 1071 1081 1103
    EndSection
    Your Modeline probably won't look like mine. Hopefully, you know the specs of your monitor (or can look them up). You can use this tool to generate the Modeline for you:
    http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
    Finally, make sure that the Monitor section includes your HorizSync and VertRefresh options. These are values specific to your monitor (again, you'll need to look up your monitor's specs)
    Here's my Monitor section
    Section "Monitor"
        Identifier      "Generic Monitor"
        HorizSync       30-83
        VertRefresh     60
        Option          "DPMS"
        UseModes        "16:10"
    EndSection
    Log out and log back in. If the problem persists, reboot your monitor as described above.
    I hope this post will help someone, someday!

    Hi-
    You can plug a DVI-I dual link female into the DVI-I single male on a graphics card.
    From the outside, the male has all the holes for all the pins on the DVI dual, there are just no wires attached to the center group of the DVI single male.
    The Radeon 9800 is a DVI-I single link card. There is no getting around it.
    The maximum supported digital resolution for a Radeon 9800 is 1920x1200:
    http://ati.amd.com/products/radeon9800/radeon9800prome/specs.html
    This said, the 30" Cinema Display requires a dual link DVI connection, as equipped on the graphics cards, as listed, in Malcolm's post above.
    G4 AGP(450)Sawtooth   Mac OS X (10.4.8)   2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

  • I can't connect my I-Phone 6 to my car Bluetooth, any fixes yet?

    I can't connect my I-Phone 6 to my car Bluetooth, any fixes yet? I just updated with the new update this morning. My I-Phone 5s had no problem connecting to car Bluetooth.

    Hi Denisefromjoetowm,
    When you attempt to connect your iPhone 6 to your car via Bluetooth, how far does it get?
    Glad you updated your iPhone.  There are other things to test for, see:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Take care,
    Nubz

  • Any Fixes Yet?

    I have some very expensive (to me) foreign language training CDs that worked fine on my old imac but won't run on my intel based Macbook Pro. I understand that there is a difference between OS Classic and the Rosetta based system. Do you have any insight on newly developed software that will allow reformatting or reading the old CDs. I hate to have to go through the expense of replacing them...almost cheaper to but a PC just to run the apps.

    Any Fixes Yet?
    Sorry, but applications that require Mac OS 9, or Classic, will not run an Intel Mac.
    This is not something that is likely to change.

  • What is needed to use iPhone 5 musicdock with iPhone 4S and getting iPhone 4S battery charged. Any adapter yet?

    What is needed to use iPhone 5 musicdock with iPhone 4S and getting iPhone 4S battery charged. Any adapter yet?

    Not by Apple but see this
    SANDBERG 440-45 Adaptor 30 Pin to Lightning Connector
    Try Amazon in your Country

  • Hey Guys, My ipad is disabled, and i havenot synced it with any computer yet, and I am not using find my iphone, how should I enable it?

    Hey Guys, My ipad is disabled, and i havenot synced it with any computer yet, and I am not using find my iphone, how should I enable it?

    You will need to restore it as new. unfortunately you will lose any data not saved but you can still redownload all of your apps.
    http://support.apple.com/kb/ht1414

  • Trying to access row values in a table which does not have any rows yet

    try{
                             MappedRecord importParams = recordFactory.createMappedRecord("CONTAINER_OF_IMPORT_PARAMS");
                             IFunction function1 = client.getFunctionsMetaData().getFunction(funModGetDet);
                             IStructureFactory strucFact = interaction.retrieveStructureFactory();
                             response.write("try2 :"+pnumber);
                            IRecord structure = (IRecord) strucFact.getStructure(function1.getParameter("PERNR_TAB").getStructure());
                             response.write("try111 :"+pnumber);
                             structure.setString("PERNR",pnumber);
    I am getting the following error "Trying to access row values in a table which does not have any rows yet " where PERNR_TAB is a table containing field "PERNR".
    Can anybody help me out?

    Please re-post this question in the appropriate forum. It seems to have nothing to do with Web Dynpro.

  • Any resolution to echoing iphone 4s?

    Any resolution eching in the iphone 4s?

    hopefully its just a software issue that way it can be patched in an ios update.
    i read somewhere that a "fix" is if you start to hear an echo then press the speaker button 2 times (1 turns it on the second turns it off). this should give you somewhere between 5 - 15 min of echo free talking

  • CC desktop says "You have not installed any applications yet"

    I've previously installed Lightroom, Photoshop and Bridge, all working fine.
    Today my CC desktop says YOUR APPS (0) - "You have not installed any applications yet".
    I've tried logging out of CC desktoop app and loggin in again. 
    Tried loggin out of CC desktop, deleting OPM.db file and logging in again.  Both unsuccessful.
    The applications run fine.
    Running Windows 7 Pro 64
    How can I rectify this please.
    Thanks
    Stuart

    Found part of the problem.
    I had changed the language to English International in the CC desktop application.  Changing language from international to north american allowed me to see all the apps.
    However I only see Photoshop and Bridge installed.  I also have lightroom installed, but it does not show in my list of installed apps.

  • You have not installed any apps yet

    Started Cloud application this afternoon and got the following message 'You have not installed any applications yet' I have 11 apps installed and have been using them for 4 months. Should I click on install to add them again? If CC doesn't know what is installed how will I get the updates?

    Hi Richard,
    Do the solutions described in this document help?
    http://helpx.adobe.com/creative-cloud/kb/creative-cloud-application-recognizing-available. html
    -Dave

  • ICloud does not work with Thunderbird 7.0.1.  Any resolution?

    Migrated to iCloud from MobileMe and reset imap server and password on Thunderbird per Apple guidnace (article HT4864) for third party setup.  Does not accept password or reach server.  Webmail access to iCloud via browser works fine, so password is correct.  Any resolution or ideas?  Thunderbird worked fine with MobileMe.  Can I go back to MobileMe until Apple gets this figured out?  (windows 7 prof, TB 7.0.1)

    You see, that happens if one does not read the famous "minimum system requirements". They are not stated for joy and fun.
    In other words :
    on OSX Lion  you must use iCal/Adress Book/ Apple Mail
    on Windows Vista and Win7 you must use Outlook 2007 or 2010.
    "Thunderbird" is just some "other" clients. And it is nowhere written that it is supported. Just like nowhere is written that XP or some older OSX is supported. Nex time read the requirements better.

Maybe you are looking for