Bug avec Bridge, au démarrage message concernant mémoire cache, et ensuite Bridge plante, que faire?

Quand je lance Bridge, j'ai un message d'erreur qui m'indique:
"Bridge a rencontré un problème qui l'empêche d'accéder à la mémoire cache. Afin de résoudre le problème, essayez de purger la mémoire cache centrale dans les préférences de la mémoire cache."
Quand je vais dans les préférences pour purger la mémoire cache, Bridge plante, je suis obligée de forcer à quitter.
Si je ne purge pas la mémoire cache, aucune image ni fichier apparait, Bridge plante, je suis obligée de forcer à quitter.
En gros, je ne peux plus me servir de Bridge.
Que faire?
Merci d'avance

Ça ne fonctionne pas, le problème sur l'autre sujet du forum est un problème de lancement de l'application, ce qui n'est pas mon cas, j'arrive à lancer l'application, le problème vient après.
J'ai malgré tout fait la manipulation expliquée en #16, j'ai également ensuite vérifié les permissions des dossiers Adobe, elles étaient toutes en "lecture et écriture", mais l'application bloque toujours.
J'ai relancé l'ordi, fait "réparer les applications" dans l'utilitaire de disque, le résultat est toujours le même, quand je lance Bridge, j'ai le message concernant la mémoire cache, et ensuite tout est bloqué.

Similar Messages

  • Message : "connectez-vous à iTunes pour utiliser les notifications push",    QUE FAIRE ??? MErci

    Bonsoir à tous, j'ai un problème subitement avec mon iphone j'ai ce message qui s'est noté sur mon iphone, je le trouve différent a l'utilisation, quelqu'un peut m'aider ? que faire ?
    Merci
    [email protected] ou [email protected]

    Contact support by web chat and have them reset activations on their end.
    Mylenium

  • Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

    I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive.  The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache.   There are 4 files in there that are taking up 124 GB!  Can I simply delete these files or will it corrupt my regular files?  I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

    Yes, you can delete the cache files manually,  Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches.  Depending on your files, that can take a few minutes or several hours.
    A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
    If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

  • Mon identifiant Apple est verrouillé concernant les achats sur l'App store. Que faire ?

    Salut, j'ai voulu acheter une app sur l'App store, j'ai donc du m'identifier et répondre à mes questions secrètes mais ensuite mon identifiant s'est verrouillé concernant les achats que je veux faire... Quelqu'un aurait une solution ? Merci d'avance

    See this discussion post from Niel. https://discussions.apple.com/thread/5694202

  • Weblogic Message Bridge Producing Duplicate JMS Messages

    We have a message bridge that we use to integrate with TIBCO. The message bridge is deployed on a WL cluster. We see duplicate JMS messages produced by the bridge when it is deployed on the cluster. We don't see this behavior when only one ManagedServer in the cluster is active,.
    TIBCO version: 4.4.3 V5
    WLS: 10.3.3 with patch for bug BUG8732539 (BQC6)
    java -version
    java version "1.6.0_17"
    Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
    Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2121-linux-x86_64, compiled mode)
    We are also seeing a lot of exceptions related to
    <May 27, 2011 4:11:57 PM PDT> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
    However the bridge is active. We are monitoring the message-out count on TIBCO and we observed that we see duplicates whenever there a message is re-delivered. We opened a case with Oracle support and they suggested patch 10258751 which didn't help. The next suggestion was a patch for "Bug 11852771 - [WLS10.3.2]MISSING AND DUPLICATE IN JMS QUEUE MESSAGE MONITORING" but I don't think it will help since our JMS consumers are getting duplicate messages and this is not just a UI issue.
    Here is the message behavior when we send a single message:
    Timelines
    11:34:17 --> Message sent to TIBCO EMS queue
    11:34:17 --> WL MS3 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:17 --> WL MS1 says it got the message and committed the transaction
    11:34:17 --> Message is visible in the JMS queue in the admin console
    11:34:17 --> TIBCO EMS has still not received an ACK from WL for the message
    11:34:31 --> TIBCO EMS resends the same JMS message to WL
    11:34:31 --> WL MS2 says it got the message and committed the transaction
    11:34:31 --> WL MS1 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are two messages in the JMS queue)
    11:34:31 --> TIBCO EMS has still not received an ACK from WL for the message
    11:34:54 --> TIBCO EMS resends the same JMS message to WL
    11:34:31 --> WL MS4 says it got the message and committed the transaction
    11:34:31 --> WL MS2 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
    11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are three messages in the JMS queue)
    11:34:31 --> TIBCO EMS receives an ACK from WL for the message
    MS04
    ####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: true
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-6A59E8FE76C4FC4CA149
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <MS04> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<193654.1306521294611.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    MS03
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257342> <BEA-000000> <Bridge MessageBridge1 Successfully got connection to the target destination>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1: both source and target adapters support XA = true>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 supportsMDBTX = false supportsXA = true async = true>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 WorkMode = Exactly-once>
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntimeVerbose> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 Entering processMessages() ------ >
    ####<May 27, 2011 11:34:17 AM PDT> <Error> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-3AA29116A4CA622834EA> <> <1306521257343> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
    at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
    at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:200)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
    javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
    at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
    at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
    at $Proxy62.receive(Unknown Source)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
    at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
    ... 8 more
    ).>
    ####<May 27, 2011 11:34:17 AM PDT> <Warning> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257344> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    .)>
    MS02
    ####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271386> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: true
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-679AF074F381152F047C
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271392> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<196075.1306521271386.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:54 AM PDT> <Error> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:225)
    at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    ... 2 more
    ).>
    ####<May 27, 2011 11:34:54 AM PDT> <Warning> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    MS01
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257536> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
    JMS Message Class: TextMessage
    JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
    JMSCorrelationID: null
    JMSDeliveryMode: PERSISTENT
    JMSDestination: Queue[SourceQueue1]
    JMSExpiration: 0
    JMSPriority: 4
    JMSRedelivered: false
    JMSReplyTo: null
    JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
    JMSType: null
    Transaction Id: BEA1-72BC818FE2BB8C2655C6
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257542> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
    JMS Message Class: TextMessage
    Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
    New JMS MessageID: ID:<195581.1306521257536.0>
    <?xml version="1.0" encoding="UTF-8"?>
    <commands ...
    >
    ####<May 27, 2011 11:34:31 AM PDT> <Error> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
    at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
    at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
    at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
    at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
    javax.transaction.xa.XAException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
    at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
    at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
    at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
    at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
    ... 14 more
    at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
    at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
    at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
    at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
    at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
    at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
    at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    ... 1 more
    ).>
    ####<May 27, 2011 11:34:31 AM PDT> <Warning> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
    .)>

    @Tom, thanks for your hints and sorry for my delayed response. Here are my answers to your queries…
    -- Does messaging work, without any exceptions, when only one bridge is active?
    It works fine when only one node of the cluster is active. -- I'm not familiar with Tibco monitoring, but I suspect that the "message-out count on TIBCO" stat doesn't always imply that there's a duplicate message. It could mean that an initial message delivery attempt failed, it's transaction rolled back, and the message was redelivered. Redelivery after a failure is normal - the original delivered message, if one actually made it onto a WebLogic queue, should be discarded by WebLogic when its failed transaction eventually rolls back (before its ever handed to a consumer application).
    You are absolutely right. The mismatch in count was due to redelivery attempts. We could see that as soon as we turned on trace in TIBCO-- The posted stack traces look like they may be JVM stdout/stderr scrapes, which are often automatically truncated, for example, see the "... 8 more" listed at the bottom of one of the stack traces below. There might be more information in the full stack trace for the "Resource manager is unavailable" exception. Full traces are logged in each WebLogic Server's log files.
    I tried redirecting the output and even set "stdout Stack Trace Depth:" to -1 but I am not albe to see the complete trace.-- The setTransactionTimeout NullPointerException error message looks like it is collateral damage from the original reported "Resource manager is unavailable" exception that's thrown earlier during the enlistResource() step. If you are truly getting duplicates, then I think this is a clue that the bridge is somehow (stupidly) trying to proceed with forwarding the message despite the fact that there's no current transaction on the thread...

    I have a case open with Oracle support and we have extensive debugging turned on. Here is what the engineer came back with. There is an issue with XA transactions in JCA adapter when it talks to third party providers like TIBCO. Since the resource names are not unique across the cluster, a XA transaction is started on multiple nodes in the cluster for the same message. All transactions abort but the message is persisted and TIBCO redelivers the message since the connection is severed when the transaction aborts. We were able to reproduce this scenario at will with our setup and Oracle was able to reproduce the issue too. 
-- Can you check the state of the message on the WebLogic Q? The fact that a message is shown on the WL console doesn't necessarily mean that the state of the message is visible (it could be waiting for the transaction to commit - something that apparently never happens). On the console: Services -> Messaging -> JMS Modules -> [module name] -> [destination name].

    Our consumer was getting duplicate messages. This confirms that the console was not giving us incorrect information. The console showed that 2/3/4 messages were in "current" state when we expected only one message.
-- Make sure that the bridge's Tibco destination is a Tibco queue not a Tibco topic (it's happened).

    Yeah we made sure it was a Queue.
-- Can you post your bridge and destination stanzas from your config.xml? 

    Will try to do this shortly but have to strip out lot of information.
-- I vaguely recall that there was a problem with untyped connection factories in Tibco at one point (not sure). You might want to try changing the Tibco configuration to spin-up "XA Queue Connection Factory" instead of just an "XA Connection Factory" (plus modify the bridge configuration accordingly).

    We tried this but it didn't eliminate this issue. One thing we did notice however was that the number of rollbacks were greatly reduced.

    Here is the workaround that Oracle is suggesting: Create pinned destinations and assign it to a distributed queue. This will keep the transactions local and hence eliminate the duplicate transactions and rollback. We tried it and it eliminated the dups issue. However I discovered another bug during my testing. Our cluster messaging mode is "Unicast" and message forwarding from zero consumer queues to queues with consumers fails. We have four/five nodes in the cluster and two consumer threads. I observed that the zero consumer queues always forward to one queue in the cluster that has consumers. The forwarding stalls when I bring down the node that has consumers. Again, we were able to reproduce this issue at will and Oracle has acknowledged that it is a bug. They've reported that Unicast fails without any warning whereas Multicast fails with a warning in the log. We have observed this message forwarding stalling even with UDQs.
    I have another case open for an issue where our message bridges that transfer messages from TIBCO to WLS stalls after sometime. The status is shown as active but it is not doing anything. The server instance shows stuck threads trying to roll back a message. TIBCO logs indicate that it is receiving a request to rollback a transaction but it is not finding the transaction to rollback. The only way to recover from this condition is to restart the cluster. I am fairly confident that he root case for this issue is again the XA transaction issue. I changed our UDQ to pinned destination in one environment and we are no longer seeing dups or bridge stalling there. Hopefully Oracle can resolve the message forwarding issue.Thanks again….

  • J'ai un bug avec mon appli mail sur mon iPad. Sa me met " impossible de vérifier les donne du compte " j'ai bien une connexion et mon compte est bien valide. Comment résoudre ce problème ?

    Bonjour
    J'ai un bug avec mon appli mail sur mon iPad. J'essaye de lire mes mails ou même en envoyer et un message vient en permanence après m'avoir demander mon mot de passe plusieurs fois sa me met " impossible de vérifier les donne du compte " j'ai bien une connexion et mon compte est bien valide. Comment résoudre ce problème ?

    Translater message un english :
    Hello
    I have a bug with m'y application " mail " on my iPad. I try to Read my email or send email but a message come all Time before tell me Many Time my password. This message is "impossible to check the Data account " I have a good connection and my account haven't got problem. How i can resolve this problem ?

  • A la fin de la synchronisation de mon Ipad (version 4.3.1) avec Itunes version 10 je recois le message d'erreur "Itunes n'a pas pu synchroniser l'Ipad car une erreur s'est produite". Pourtant la synchronisation est correcte. Que faire?

    A la fin de la synchronisation de mon Ipad (version 4.3.1) avec Itunes version 10 je recois le message d'erreur "Itunes n'a pas pu synchroniser l'Ipad car une erreur s'est produite". Pourtant la synchronisation est correcte. Que faire?

    Bonjour IKA 63
    Concernant mon souci de sauvegarde, j'ai pris mon courrage à 2 mains et fait une réinitialisation. J'ai perdu quelques données, mais cela n'a pas été aussi catastrophique que je le pensai. Cela m'aura permis de faire un grand nettoyage !!!
    Depuis cette opération, les sauvegardes fonctionnent sans souci.
    Je ne sais pas ce qui est arrivée ??? et ne le saurai sans doute jamais, c'est bien dommage !!!
    Je suis aussi passée à ios6 et je n'ai pas de souci à signaler, ni côté boite mail ni autre, pour le moment tout fonctionne comme avant.
    Désolée de ne pouvoir répondre plus précisément, bon courrage !!!
    Annick

  • When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud.  I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file).  I don't want to log in

    When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud.  I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file).  I don't want to log into CC since I am not a subscriber, and this means that I have to work around, and go  back to Bridge, and tell it to open the file in Adobe RAW.  However, this does not work for older psd files which for some reason cannot be opened in RAW.  How do I return to the process of simply allowing RAW files to open automatically in Adobe RAW, and simply right clicking on the image in Bridge to bring up the option of opening it in Photoshop?

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • [svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

    Revision: 15217
    Revision: 15217
    Author:   [email protected]
    Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
    Log Message:
    Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-508
    Modified Paths:
        blazeds/trunk/modules/common/src/flex/messaging/errors.properties
        blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
        blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

    Thanx Mete, yeah i did...
    but i solved it some other way... not entirely sure this was
    it though as i was doing a lot of things at once...
    it was fds.swc... possibly it was out of date or missing.

  • When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in the cache preferences to correct the situation. I have tried this and still get this message. when I delete image

    When opening Bridge I get this message: Bridge encountered a problem and is unable to read the cash. Please try purging the central cache in the cache preferences to correct this problem. I did this and still get this same message.Also now when deleting images they don't delete till I close and reopen Bridge. What can i do to fix this problem?

    Maybe a Preferences reset can help:
    Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
    Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
    Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.  
    In the Reset Settings dialog box, select one or more of the following options:  
      Reset Preferences 
    Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
    Purge Entire Thumbnail Cache
    Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
    Reset Standard Workspaces
    Returns Adobe predefined workspaces to their factory default configurations.
    Click OK, or click Cancel to open Adobe Bridge without resetting preferences.   

  • I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to corr

    I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I have purged the cache several times and adjusted settings with no change. I also downloaded the entire suite and installed. Do I need to uninstall all of the programs before installing the suite? There is not an option to install only Bridge from the install package.

    Maria,
    Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
    That field is not for attempting to fit your entire question in there.
    Please keep this in mind next time you post.  Thank you.

  • [svn:fx-trunk] 14719: Bug: LCDS-1522 - RTE running reliable messaging test over NIO HTTP endpoint caused by checkin 272187 .

    Revision: 14719
    Revision: 14719
    Author:   [email protected]
    Date:     2010-03-12 02:20:41 -0800 (Fri, 12 Mar 2010)
    Log Message:
    Bug: LCDS-1522 - RTE running reliable messaging test over NIO HTTP endpoint caused by checkin 272187.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Checkin 272187 fixed small messages to work on NIO HTTP endpoints but this exposed a bug in HTTPChannel. HTTPChannel is not supposed to support small messaging feature but there was one place where small messages feature were still being enabled which caused the bug.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/LCDS-1522
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/HTTPChannel.as

  • [svn:cairngorm3:] 15301: - Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated .

    Revision: 15301
    Revision: 15301
    Author:   [email protected]
    Date:     2010-04-09 03:30:11 -0700 (Fri, 09 Apr 2010)
    Log Message:
    - Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated.
    - Updating the sample to show this use-case.
    Modified Paths:
        cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/module/ModuleMessageDispatcher. as
        cairngorm3/trunk/libraries/ModuleTest/src/CairngormModuleLibSample.mxml

    Hello,
    The error
    2. How to get rid of "ORA-06512: at"FLOWS_030100.WWV_FLOW_RENDER_QUERY", line 636"?you can also find in the new features application. I wrote a post about that some days ago:
    Bug in New Features Application?
    Had some trouble to get the PDF print working, too. Printing works fine for standard reports, but for interactive report I am not able to get it working. Sometimes I am getting only blank pages (and no file) and sometimes I am getting PDF's which just contain an internal 500 error. Some details are in this thread: Print Interactive Reports does not work
    Maybe that's related to the error of kkkannan74.
    Regards, Tine.

  • Possible to use a message bridge for access to message copies?

    I'd like to be able to consume copies of messages that go across a queue so that they can be validated during testing.
    I've been unable to find any mechanisms for authenticated message monitoring which exists in other JMS brokers such as TIBCO EMS and so I'm going down the route of seeing whether a message bridge could help me. My thinking is that I can bridge from QueueA onto TopicA - where the message stays on QueueA and a copy is sent to Topic A which can be safely consumed by the testing tool
    First question - is this a workable solution, ie does the message sent to QueueA stay on QueueA until is is consumed normally, or is the message forwarded to the bridged TopicA thus removing the original message?
    Second question - I've tried to get a bridge working but encounter an error when trying to use it. The monitoring tab shows the bridge is up OK but I get the exception below in the admin console
    <11-Oct-2010 13:55:12 o'clock BST> <Warning> <MessagingBridge> <BEA-200026> <Bridge "Bridge-0" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was javax.resource.ResourceException: Error sending message.)>
    Any help and advice appreciated
    Stuart

    One approach is to use a topic; producers send to the topic and both of your application consumer and your auditing consumer consume from the topic. If you have multiple application consumers, you could have a bridge to forward the messages from the topic to a queue and your applications consumers can consume from the queue, while your auditing consumer consumes from the topic.
    There is a message life cycle logging capability in WLS JMS, which may be helpful. It can be enabled on a per destination basis. It logs an event in a file when a message is produced, consumed, removed, expired and etc. However the message body is not available in the log. The details can be found at
    http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/troubleshoot.htm#i1128815

Maybe you are looking for

  • Photoshop CC can´t open .PNG files?

    I can´t seem to open .PNG files with Photoshop CC. Looking around the net for answers i found out that resetting your Photoshop preferences might be able to solve the probem. This unfortunatly creates a new problem, how do i reset the preferences in

  • Creating table type

    Hi, I am new to ABAP, can any one tell me how to create Table type for a database table in se11. Example, I created a table ZEMP in se11, now I want to create a table type for this table. How can I do this? Thanks, Satish

  • Smart motors program

    Hi, This Sam,I am quite new to labview (have been using it for about a week) I have recieve a project for making a program for Smart motors. I was unable to write a program to my smart motors . I have searched this forum and found little tidbits to h

  • Mail to idoc

    hi expects,   i have take the attachment data from my offical mail and i have send to idoc in sap. i am using POP but it is taking all the mail .how cam i solve this problem..

  • Error when attempting to merge OCS R2 and Lync 2010 Topology

    Hello, We are having an issue when trying to merge our OCS R2 and Lync 2010 deployment.  The error is as follows: TopologyXmlFileWriter::OpenReportFile IOException: Message 2014-01-22 17:15:54 INFORMATION :  Executing query: "SELECT * FROM MSFT_SIPES