Bug - Button inside scrollable frame

Hi,
I got a button bug in my folio.
I made a scrollable frame with buttons inside it and the buttons controls a multistate.
When I tap the buttons they don't perform the action, it just change the color (click state).
It only performs the action when I tap again the same button.
What can I do to fix this issue?
Thanks.

Hi Bob,
I am using ID CC 2014 and testing on an iPad.
In my article, I made two objects a MSO and a scrollable frame with some buttons inside it.
My scrollable frame has buttons only and allows the user to slide these buttons horizontally.
The buttons has an action to change the states of my MSO (go to state).
The problem is when I test this folio on my iPad, If I tap any button, the state of my MSO keeps the same and the button goes to the Click State.
I can only access other state of my MSO clicking a second time on the same button.
So the button keeps on the Click State and my MSO change to the State that was scheduled.
What can I do to fix it?
Thanks.

Similar Messages

Hyperlink button inside scrollable frame

Is it possible to put a button that scrolls with the content inside a scrollable frame ?
I've tried with the hyperlink overlay and several ways with the button overlay, also tried to define the button action after defining the scrolling content (Bob suggests this in a topic from some months ago) but nothing seems to work, it's if the button doesn't exist.
When putting the folio online to check it on the iPad I always got a 'upload failed network failure' message but when clicking the try again button the upload restarts and at the end I got the 'content uploaded' message. Don't know if that could cause the button troubles.

I've had no problem getting buttons in scrolling frames to work so without seeing your files, there's not much I can offer besides making sure the links are created properly.
Bob

Button in Scrollable Frame not working

Hey, I read lots of other questions concerning this topic but could'nt find a sollution
I am working with CS5.5 and the newest version of the Folio producer. I have a page witz a Video, some buttons and a scrollable Frame where are some pictures inside. These pictures ae grouped together and then anchored inside of the frame. Scrolling these images works fine, but when convert the pictures into Buttons and and link them to a random website nothing happens when I click them.
Is it only possible to test this on the iPad? At this moment I can only test in the Content Viewer Deskop Application. I have already tried everything...putting layers to the front or background, defining the pictures as Buttons before or after putting them into the scrollable frame...nothing is changing...
Now I am despairing a bit. Hope somebody can help me!

Yes yes, I know. But makes it a difference with this issue? Problem is: I have the iPad I use for testing only from while to while and I dont get it back before monday. Not a very good starting point to build a folio, I know...

Hyperlinked button in scrollable frame not working

Hi all,
I'm working on a multi-article folio. The first article includes a scrollable frame that contains a group made up of one image and two buttons.
One of those buttons works correctly; that is, it is a mailto that brings up an email client when clicked.
The other button should open a web page in a separate window. However, when I click this button, I get the following error message:
Cannot Open Page
This page cannot be opened because of a error.
The error is "A server with the specified hostname could not be found." (-1003).
The odd thing is that another button in the second article that links to the exact same URL *does* work correctly. That article does not use scrollable frames; instead, the button is on top of an image sequence. I have very carefully copied and pasted the URL from the button that does work to the button that does not work. No joy.
Here's a screenshot of the first article that shows the non-functioning button outlined in a blue frame:
I am using InDesign CS6 (version 8.0) and Folio Builer
12.2.4.20120611_m_691037 8.0.7.21 .
Your help is much appreciated!

It happened to me too and the only workaround was that I copied the hyperlink text and created a separated text box and pasted the link.
I then made that textbox "fot frame to content". After that I created a button out of it and assigned the URL for it. After all this I pasted the button in the text as text object.
Here is a screenshot. This text was within scrollable frame

Buttons inside of scrollable frames

I have a series of photographs that act as buttons that go to a page number. In one article, I've grouped together these buttons and put them inside of a scrollable frame. They work fine.
Now, in another article (both of these articles are part of the same FOLIO) these buttons just go to MSOs. The MSOs have pan and zoom enabled (a lot of interactivity going on). I've cut and paste these buttons inside of a frame and made it scroll, but the buttons are non functional. Why are buttons functional in one frame and non functional in another?

An update to the DPS tools that addresses the issues with iframe/HTML and buttons in release 25 is now available. Updated tools can be downloaded by following the link for the appropriate InDesign and OS version at http://www.adobe.com/go/learn_dps_install_en.
Neil

Button with sound in scrollable frame

I ran into a problem. If i add sound to a button inside of a scrollable frame the ‘on click’ action of the button doesnt work.
Outside of a scrollable frame it all works fine.
Can somebody help me ?

Hi Bob, thank you for reacting.
I want to use the ‘onclick’ function of a button for the visual effect and a sound for the experience.
But somehow the onclick effect doesnt work.
I am using a picture as a button and on click the button go 50 %
the button has a navto function
this is my button:
on release:
- play sound
- navto
button on click activated

Scrollable Frames bugs

Hi,
I got some errors with drop 19 while creating my first magazine....
1. Horizontal slider, placed on the left side. On the right side is an image with a contour and a textflow (nor sure whats the name for that n english...). If you scroll the text horizontally to the left, the textflow is as if the image is placed in the text. The issue is, that theres a bug with the overlay and placed mages on top of it, it thinks it is placed within the scrollable text
2. You cannot leave a page without a button when the scrollable text area is too big. I think at the end of the srollable text the page should flip. Users might be confused if nothing happens. This must be fixed soon. As i have a single license and a tight time frame, i cannot fix it later (without paying for it again..). Drop 19 is nearly useless with.scrollable frames, i read a couple of ther reports naming that issue...
Hope to get some jelpfull answers. In my opninion, the whole dps is in early beta. I started using it with drop 9, the handling is better now, but some fetures are still missing...
Kind regards
Simon

Another issue: scrollable text withn a scrollable text is working, but only if the scrolling frame is visible. If it is not visible on lage load, the font site s reduced and not scrolling, it is repeatsble, i can provide indd files if required

Scrollable frame is text: anchored object in text can not be button?

Following example: A textframe. With an anchored object (group). Paste textframe in other frame to make scrollable frame (pan only). Select anchored frame in already pasted into textframe, make button for anchored object (go to state).
Does not work, button does nothing (and yes a converted it to a button after the paste into other frame as last step).
Not possible?
DPS v18

If you want the button in the scrollable frame to control an MSO state, the button/scrollable frame needs to be part of the MSO. It is an InDesign limitation that buttons cannot control videos, audio clips, or MSOs unless they're on the same "level" in the document.

Scrollable frames. Buttons not working.

Hello.
I have a problem with buttons in the scrollable frames.
I have a slideshow with a thumb's. Each thumb consist of MSO (non active icon and active icon) and clear frame - button to that MSO and to slide foto. The thumb's grouped and placed into the frame with horizontal scroll overlay effect.
That frame placed into another frame-pull out tab, which have vertical scroll effect. And when I pressed the button, slide fotos changes correctly, but button MSO not working.
See files from dropbox -- https://www.dropbox.com/sh/rsbf1jto3a39jug/IVcQxaYJOW
Sorry for my english. I need help very much.
Thanks.

Hi,
I understand that I can use two 'states' of the buttons. And I tried it. But. Buttons renditions are raster images. And on the retina display we had bad quality. My target was to create vector buttons. With good quality on both displays.
Any suggestions?
04.10.2013, в 12:03, Christophe_Quinzoni <[email protected]> написал(а):
Re: Scrollable frames. Buttons not working.
created by Christophe_Quinzoni in Digital Publishing Suite - View the full discussion
Hi (again),
It seems that you built your stuff in a very complicated way.
First, try to make simple!
You mixed MSO and buttons functions. Useless and unfonctional.
Yous should use only button panel, with two different 'states' ('Normal' and 'Clic').
See below (no MSO function used at all for the button):
http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468602/445-605/Button_ 1.jpg http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5735625-468603/448-605/Button_ 2.jpg
Use the layer panel to easily select the objects you want to modify.
Please find your file here: https://dl.dropboxusercontent.com/u/46115208/slideshowButton.indd
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5735625#5735625
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5735625#5735625
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5735625#5735625. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

BUGS: stop at last image and scrollable frames

Hey,
I think I've identified two bugs in the latest release:
1) MSO slideshows that have Autoplay checked, don't respect the "Stop at last image" option, and return to the first stage regardless. This behavior only occures some of the times, and I am not certain what makes it happen. I think it may only happen with slideshows in which are configured to be exported in vector format.
2) Scrollable boxes that are configured to be vertically scrollable only, are also horizontally scrollable, if the content of the scrollable box exeeds the horizontal limits of the scrollable frame.
Did anyone else expirience these bugs? Any workarounds or fixes?
Thanks

Doesn’t anyone bother to read?
I’m sorry, but It’s getting quite frustrating answering the same question over and over.
We now have about 15 threads on the same subject.
If you had read back just a few posts you’d know there’s a bug causing this.
Bob

Hiding a button underneath a scrollable frame

HI there, I'm looking to have a button underneath a scrollable frame that is revealed and becomes functional when an image is swiped away from the top level.
Is there a way to tap through scrollable frames or include transparent elements within the scrolling frame so that I can swipe away my image to find a button underneath?
Cheers, Alex

Can't be done. The area taken up by that frame is live all the time.
You could try it with an MSO instead of a scroll. That would work.

Buttons underneath a Scrollable Frame

Hi,
Is it possible to have object states/buttons underneath a scrollable frame?
I want a title page that is swiped to the side revealing buttons underneath...
Visually I can set it up, but as soon as you've swiped the title page to the side you can see the buttons but can't touch them.
Any work arounds?
Thanks.

This is normal, the interactive overlays will respect their layered order. Especially If you cover another object completely as with your scrollable frame.
Why not add the buttons to the left or right of your title page design and group it as one object that is then cut and pasted-into your scroll region. That way when you swipe away the title page it brings the buttons into view.

IOS Viewer Scrollable Frames bug

Scrollable frame drawers pulled down and to the right, which are set to Use Document Position, function as expected in the desktop and Android ACVs, but are displayed as static fully drawn objects without the scrolling functionality in the iOS ACV.
Adding the stand-off item that was used in the pre Use Document Position era will get them to function correctly.
See in this sample document.

the behaviour is really different between desktop and iPad. the android viewer and the desktop viewer are both built in the (same?) air framework, so they behave the same the most time.
funny that it is working there, i always need to insert some "helper boxes" to ensure that there is enough flesh in the scrollable content that you can drag out of the view:
I edited your document:
http://download.nordsueddesign.de/iPadPullTab_v.idml
this might be a bug, but there is an easy workaround.
—Johannes

Add a button in a scrollable frame?

Hi guys,
I have a scollable frame with a button in it. The button triggers a full screen video but when i click on it, nothing happens. Do you know why? How can I have a movie poster (my button) in a scrollable frame act as a button...
Thanks

how can i use the button atwork as the poster image?
I put the video in the scrollable frame, choose an image from a file as the poster but it still doesn't work

Problems with scrollable frames

I have an old DPS file that has videos inside a scrollable frame and they work fine. However, i am updating my files and in the new CS6/cc when i create the content, I group all the items, cut and paste into the smaller textframe and when i go to the Folio Overlays panel with the text frame highlighted, the option for scrollable frames is greyed out. Video is highlighted but it will not allow me to create a scrollable frame. Does anyone have a recommendation for what i am doing wrong.

You are correct, I missed your point.
I got it this time though and it worked!
Wow, nifty work around. Thanks.
Now that I have successfully embedded video within the scrollable frame, I am concerned about the 2 GB max from apple.
I researched streaming video and successfully tested this, however it seems the frame for the video needs to be scaled to the preferred viewable size because there is not an option for “play full screen”. As you can see in the screenshot below, I am trying to place the video under the play button using streaming content.
Do you know if this is possible?
Jill

Bug - Button inside scrollable frame

Similar Messages

Maybe you are looking for