Bug Check Error on Exchange 2013: Microsoft-Windows-WER-SystemErrorReporting
This is the error which prompted the server to reboot:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 3/1/2015 9:27:00 PM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: exch13-02.domain.com
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000ef (0xffffe000f9bfc080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 030115-27921-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-02T05:27:00.000000000Z" />
<EventRecordID>36389</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>exch13-02.SC.ESILICON.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x000000ef (0xffffe000f9bfc080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">030115-27921-01</Data>
</EventData>
</Event>
Hi,
It seems like a Windows Server problem, not an Exchange Server problem.
What’s the version of your Windows Server and Exchange Server?
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/f132d246-7114-4223-9ff7-e72f3ade0708/exchange-server-2013-restarts-frequently-after-cumulative-update-3-is-installed?forum=exchangesvradmin
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support
Similar Messages
-
Microsoft-Windows-WER-SystemErrorReporting
Hi, I recently installed Windows server 2012 R2 in a Server HP Proliant DL320E G8 with a Intelligent Provisioning Tool, it was successful. But I detected a problem, when the system inicialize, after the drivers installed, it restart.
I checked the event viewer and I saw the next problem.
Note: The operating system is in spanish.
Nombre de registro:System
Origen: Microsoft-Windows-WER-SystemErrorReporting
Fecha: 07/01/2014 10:33:11
Id. del evento:1001
Categoría de la tarea:Ninguno
Nivel: Error
Palabras clave:Clásico
Usuario: No disponible
Equipo: SRVORBIT
Descripción:
El equipo se reinició después de una comprobación de errores. La comprobación de errores fue: 0x00000139 (0x0000000000000002, 0xffffd000249e65d0, 0xffffd000249e6528, 0x0000000000000000). Se guardó un volcado en: C:\Windows\MEMORY.DMP. Id. de informe: 010714-43093-01.
XML de evento:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-07T09:33:11.000000000Z" />
<EventRecordID>1824</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>SRVORBIT</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x00000139 (0x0000000000000002, 0xffffd000249e65d0, 0xffffd000249e6528, 0x0000000000000000)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">010714-43093-01</Data>
</EventData>
</Event>Hi,
Thanks for sharing your solution in the forum. This will help others who face the same scenario resolve the issue quickly. Your time and efforts are highly
appreciated.
Best regards,
Justin Gu -
Installing Exchange 2013 on Windows Server 2012 R2
Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint -
Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
Please Help!!!!!That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look -
Error During Exchange 2013 Mailbox Transport Role Install On Server 2012
I was installing Exchange 2013 on Server 2012. The server is not a DC, but is a member of a domain with a 2008 R2 functional level, and I was logged in as a domain admin. There has never been an Exchange instance on this domain. I got past
the prerequisite checks, and the installer showed 15 steps, so I walked away. When I came back, I saw this:
Step 8 of 15: Mailbox role: Transport service
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "Unable to set shared config DC.".
The only option on the screen was exit, so I did. I checked the start menu, and there were two new Exchange icons, but I did not click them. I ran the installer again, and it detected an incomplete install, the only option was to click next to
finish the install, so I clicked next. This time, I eventually got the same error, except the screen showed "Step 8 of 15: Mailbox role: Transport service." I did install some Exchange 2010 prerquisites on the server before Exchange Server 2013
came out, and I can rebuild the server and try the install again if that would be best, but I thought I should post here first and try to work through this since the product is so fresh. Any suggestions?I've tried three times since my last post, following
http://msexchange2010.info/archives/2330 as closely as possible the most recent time. I am consistently getting the same error that appears to imply I don't have write access to the domain. I don't understand this, because I am using the
same domain admin account I have been using all along. Nonetheless, here is the powershell output starting with the first Exchange setup.exe step (all other steps were already performed, all available updates were installed, and the server was rebooted
prior to this):
Windows PowerShell
Copyright (C) 2012 Microsoft Corporation. All rights reserved.
PS (domain admin home)> D:
PS D:\> .\Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema COMPLETED
The Exchange Server setup operation completed successfully.
PS D:\> .\Setup.exe /PrepareAD /OrganizationName:PRD-INC /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have b
een detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.
aspx
Configuring Microsoft Exchange Server
Organization Preparation COMPLETED
The Exchange Server setup operation completed successfully.
PS D:\> .\Setup.exe /Mode:Install /Roles:ClientAccess, Mailbox, ManagementTools /t E:\Exchange /IAcceptExchangeServe
rLicenseTerms
Welcome to Microsoft Exchange Server 2013 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Management tools
Mailbox role: Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Client Access role: Front End Transport service
Client Access role: Client Access Front End service
Performing Microsoft Exchange Server Prerequisite Check
Configuring Prerequisites COMPLETED
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Preparing Setup COMPLETED
Stopping Services COMPLETED
Copying Exchange Files COMPLETED
Language Files COMPLETED
Restoring Services COMPLETED
Language Configuration COMPLETED
Exchange Management Tools COMPLETED
Mailbox role: Transport service COMPLETED
Mailbox role: Client Access service COMPLETED
Mailbox role: Unified Messaging service COMPLETED
Mailbox role: Mailbox service FAILED
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0
].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions
:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
PS D:\>
I am cleaning out in ADSI and rebuilding the server for now, because the server is behaving oddly (not as oddly as it was with 6GiB, but oddly, nonetheless). I probably won't try to install Exchange again before tomorrow. What should I do to prevent
encountering the above again and/or if I encounter it again? -
Perflib and MSExchange Common Error on Exchange 2013
Hello,
I am getting two error messages (in attachment) again and again on two newly installed Exchange 2013 SP1 servers with combined Exchange roles. I found a lot but could not find and solution. Please guide how to resolve the issue;
Thanks in advance.
Regards,Hi,
For the first error, please try the following steps to check this issue.
1. Write down the name that is mentioned as [module] in your Event ID 1023 message.
2. Click Start, click Run and type Regedit [enter] (If you do not have a run option just hit the Windows key + R)
3. In the Registry browse to the key:
HKLM\SYSTEM\CurrentControlSet\Services\ServiceName\Performance
Where ServiceName references to the [module] name you wrote down in step 1.
4. Under the Performance branch check the entry that says “Library”.
5. Check if the file exits in the folder that is referenced in the registry Library entry.
6. Search the computer for that filename to see if it exists on other locations.
7. Compare file size and versions of the files that are found. If the DLL from step 5 is older/lower version then the ones in other folders you might want to rename this DLL and copy a newer one to the folder.
If you are unable to find the DLL anywhere else on the computer check the original media (CD/DVD) you installed the product from to see if the DLL exist on there. Copy or extract it to the folder where the Perflib expects it.
Then start a Command prompt and type:
REGSVR32 [path][file.dll] – where path and file.dll refer to the complete path and filename of the file you just copied.
And refer to this document
https://technet.microsoft.com/en-us/library/cc727009%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Setup Error Reinstallin Exchange 2013
Trying to reinstalling Exchange 2013 after removing Exchange from ADSI, IIS, Registry, and Active Directory. Receiving the following error when attempting AD Prep. ERROR: Method Not found: Boolean Microsoft.Exchange.Data.Mime.MimeAddressParser.IsValidDomain(System.String,
Int32, Boolean)'. and the setup fails. This occurs whether I try Schema Prep, ADPrep or just trying to load Exchange. This is a lab environment. Any suggestions to correct the install?When I look at the Schema with ADSI edit, I still see all the ms-exch attributes from the initial Schema Prep that was conducted. Both the Schema Prep and AD Prep was conducted successfully, but when Exchange 2013 SP1 combined was loaded, OWA never worked
right and I was having issues connecting properly with SP 2013. I did use a similar blog about uninstalling Exchange, that went into more depth that the one you listed. Here is a copy of my Exch Setup Logs when I attempt to run Prepare AD:
[04/23/2015 20:10:12.0108] [0] Starting Microsoft Exchange Server 2013 Service Pack 1 Setup
[04/23/2015 20:10:12.0108] [0] **********************************************
[04/23/2015 20:10:12.0108] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[04/23/2015 20:10:12.0108] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[04/23/2015 20:10:12.0108] [0] Setup version: 15.0.847.32.
[04/23/2015 20:10:12.0124] [0] Logged on user: TSYSDEV\MConnelly.
[04/23/2015 20:10:12.0140] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='preparead', Value=''.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='organizationname', Value='ExchangeDev'.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='iacceptexchangeserverlicenseterms', Value=''.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='domaincontroller', Value='tsysdevdc2.tsysdev.net'.
[04/23/2015 20:10:12.0187] [0] Command Line Parameter Name='sourcedir', Value='E:\Source'.
[04/23/2015 20:10:12.0390] [0] RuntimeAssembly was started with the following command: '/PrepareAD /OrganizationName:ExchangeDev /IAcceptExchangeServerLicenseTerms /domaincontroller:tsysdevdc2.tsysdev.net /sourcedir:E:\Source'.
[04/23/2015 20:10:12.0405] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\v8.0, wasn't found.
[04/23/2015 20:10:12.0405] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14, wasn't found.
[04/23/2015 20:10:12.0421] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/23/2015 20:10:12.0421] [0] Copying Files...
[04/23/2015 20:10:12.0437] [0] Starting copy from E:\Source\Setup\ServerRoles\Common to C:\Windows\Temp\ExchangeSetup.
[04/23/2015 20:10:18.0484] [0] Finished copy from E:\Source\Setup\ServerRoles\Common to C:\Windows\Temp\ExchangeSetup.
[04/23/2015 20:10:18.0499] [0] File copy complete. Setup will now collect additional information needed for installation.
[04/23/2015 20:10:18.0499] [0] Assembly dll file location is C:\Windows\Temp\ExchangeSetup\Microsoft.Exchange.Setup.Console.dll
[04/23/2015 20:10:22.0593] [0] Setup is choosing the domain controller to use
[04/23/2015 20:10:22.0687] [0] We have a user-specified or previously-chosen domain controller: tsysdevdc2.tsysdev.net
[04/23/2015 20:10:22.0734] [0] [ERROR] Exception has been thrown by the target of an invocation.
[04/23/2015 20:10:22.0734] [0] [ERROR] Method not found: 'Boolean Microsoft.Exchange.Data.Mime.MimeAddressParser.IsValidDomain(System.String, Int32, Boolean)'.
[04/23/2015 20:10:22.0734] [0] CurrentResult SetupLauncherHelper.loadassembly:444: 1
[04/23/2015 20:10:22.0749] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[04/23/2015 20:10:22.0749] [0] CurrentResult main.run:235: 1
[04/23/2015 20:10:22.0749] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[04/23/2015 20:10:22.0749] [0] CurrentResult setupbase.maincore:396: 1
[04/23/2015 20:10:22.0749] [0] End of Setup
Checked the registry and the keys it is looking for are not there, but no sure if I need to manually create them. Any assistance would be created appreciated or if I need to conduct the back-out plan, I can try that. -
SSL cert error on exchange 2013.
Hi,
Can I please have some help to avoid the following two error messages appears on opening outlook 2013 on windows 7 connected directly to the server 2012 domain.
Godaddy SSL cert is installed on mail.domain.com and firewall forwarding is properly setup.
There is NO error message if we connect through outlook (AnyWhere) on a system which is not part of the domain and connecting from outside.
Error Box 1
Security Alert
servername.localdomain.local
Information you exchange with this site cannot be viewed or changed...................
The security certificate is from a trusted certifying authority.
The security certificate date us valid
X The name on the security certificate is invalid or does not match the name of the site....
Error box 2
Microsoft Outlook
There is a problem with the proxy server's security certificate.
The name on the security certificate is invalid or does not match the name of the target site servername.localdomain.local
Outlook is unable to connect to the proxy server. (Error Code 10)
Any quick help will be highly appreciated!
Many thanksHi,
Are you using a Single domain cert by GoDaddy, if thats the case we cannot add more than one domain to your cert. I believe you have added the outlook anywhere domain name to your cert since your outlook anywhere connection is prompting any errors.
You have two options, one is purchase a UCC Cert and add all URL's required or Please have a look on these below Virtual Directories on the exchange server and modify the the URL's so you will not get the Cert errors.
use the shell to view the internal and external URL's,
Get-ActiveSyncVirtualDirectory | fl internalurl,externalurl
Get-AutoDiscoverVirtualDirectory | fl internalurl,externalurl
Get-ECPVirtualDirectory | fl internalurl,externalurl
Get-OabVirtualDirectory | fl internalurl,externalurl
Get-WebServicesVirtualDirectory | fl internalurl,externalurl
Change all your internal URL's similar to the external URL's, use the Set command as the example below.
Get-AutodiscoverVirtualDirectory -server EXCHANGE | Set-AutodiscoverVirtualDirectory -ExternalUrl ‘https://mail.domain.com/Autodiscover/Autodiscover.xml’
make sure all your servername.localdomain.local URL's are changed to match primary certificate name.
Regards
Boniface -
Installation Error Installing Exchange 2013 CU3 on Server 2012
Hello,
When Installing Exchange 2013 on server 2012 I get the following error during Step 1 of 8 of Transport Service. I have installed and unistalled Exchange a few times, restarted the machine manually and removed exchange from AD, etc. to no avail.
Any suggestions will be very much appreciated.
Thank You.
VK
Error:
The following error was generated when "$error.Clear();
install-MsiPackage `
-PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASDat.MSI") `
-LogFile ($RoleSetupLoggingPath + "\InstallASDat.msilog") `
-PropertyValues ("ALLUSERS=1") `
-UpdatesDir $RoleUpdatesDir
" was run: "Installing product C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASDat.MSI failed. This action is only valid for products that are currently installed. Error
code is 1605.".Martina,
Thank you for your response. KB says that Machinepolicy and Userpolicy are to be set to Undefined and that is what I have.
Windows PowerShell
Copyright (C) 2013 Microsoft Corporation. All rights reserved.
PS C:\Users\Administrator> get-executionpolicy –list
Scope
ExecutionPolicy
MachinePolicy
Undefined
UserPolicy
Undefined
Process
Undefined
CurrentUser
Undefined
LocalMachine
RemoteSigned
VK -
Certificate errors with Exchange 2013 and Outlook 2013
Hello, I wonder if someone could help.
I've recently set up a network with one Windows 2012 domain controller and one windows 2012 server running Exchange 2013.
Clients run Outlook 2013 and are all one the same Lan. Outlook's setup wizard finds the exchange server automatically and sets up the profile. However if I choose the manual setup and enter the server
name and user name it does not find the server.
When I check the server name in Outlook it shows as
[email protected] rather than the real name of the server: AYCEX01.AYC.local.
When Outlook is opened there is a certificate error saying "The name on the security certificate is invalid or does not match the name of the site." and another error saying "There is
a problem with the server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.ardfernyacht.co.uk. Outlook is unable to connect to the proxy server. (Error code 10)
The external address by which users connect to OWA and active sych is mail.ardfernyacht.co.uk. The
certificate which is used is one automatically generated by Exchange.
Any suggestions you may have would be appreciated.
Many thanks,
Ruaridh
Ruaridh MackintoshSelf sign cert wont work With autodiscover.For that you need 3rd part or from Your own CA.
Please follow this guide to install CA in Your domain:
http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Please follow this guide to request New cert in Exchange 2013:
http://exchangeserverpro.com/create-ssl-certificate-request-exchange-2013/
Your cert must contain external hostname of Your mail.domain.com
Also configure Your Virtual directories to contain internal and external hostname:
http://blogs.msdn.com/b/mvpawardprogram/archive/2013/03/18/virtual-directories-exchange-2013.aspx
Regarding servername when using autodiscover,it should automatically resolve mailbox guid instead of servername.
Please check if Your DNS is setup With autodiscover.domain.local (which is pointed to Your Exchange server)
Hope this helps!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work -
Is it ok to install Exchange 2013 on Windows Server 2012 Standard?
Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com | -
HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL
Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK -
Exchange 2013 - External Windows XP/Outlook 2007 Password Prompt
I have an Exchange 2013 server and everything is working correctly internal with XP clients that are connected to the domain. My problem is that the Windows XP computers that are connecting from outside of the office that aren't connected to the domain
and have local usernames and passwords keep getting the password prompts. I put in the correct domain\username and password and it connects. The if I close and reopen it asks me for the password, I have saved the credentials but it still asks.
I have look and applied these settings from these articles but I'm still having the issue. All of the internal and external names match my GoDaddy SSL certificate (mail.domain.com). Get-OutlookAnywhere shows:
ExternalHostname : mail.domain.com
InternalHostname : mail.domain.com
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/
http://pickettsproblems.wordpress.com/2013/04/08/windows-xp-users-not-connecting-to-exchange-2013-server/Here is my XML log from Test E-mail AutoConfiguration if you need it:
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<User>
<DisplayName>Ryan Laurie</DisplayName>
<LegacyDN>/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=03614938e08f481b8f7e1bbc7346aa22-Ryan</LegacyDN>
<AutoDiscoverSMTPAddress>[email protected]</AutoDiscoverSMTPAddress>
<DeploymentId>463444fb-5651-4b0f-91e5-6356fc132a95</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<MicrosoftOnline>False</MicrosoftOnline>
<Protocol>
<Type>EXCH</Type>
<Server>[email protected]</Server>
<ServerDN>/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
<ServerVersion>73C08204</ServerVersion>
<MdbDN>/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
<PublicFolderServer>Exchange.mydomain.local</PublicFolderServer>
<AD>SERVER2.mydomain.local</AD>
<ASUrl>https://mail.mydomain.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.mydomain.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mydomain.local</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mydomain.local</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mydomain.local</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mydomain.local</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mydomain.local</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mydomain.local</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mydomain.local</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mydomain.local</EcpUrl-extinstall>
<OOFUrl>https://mail.mydomain.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://mail.mydomain.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://mail.mydomain.com/OAB/a9a90db6-fd7f-492b-9e29-4848f16cae2f/</OABUrl>
<ServerExclusiveConnect>off</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>mail.mydomain.com</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://mail.mydomain.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.mydomain.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mydomain.local</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mydomain.local</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mydomain.local</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mydomain.local</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mydomain.local</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mydomain.local</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mydomain.local</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mydomain.local</EcpUrl-extinstall>
<OOFUrl>https://mail.mydomain.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://mail.mydomain.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://mail.mydomain.com/OAB/a9a90db6-fd7f-492b-9e29-4848f16cae2f/</OABUrl>
<ServerExclusiveConnect>on</ServerExclusiveConnect>
<EwsPartnerUrl>https://mail.mydomain.com/ews/exchange.asmx</EwsPartnerUrl>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://mail.mydomain.com/owa/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://mail.mydomain.com/ews/exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Fba">https://mail.mydomain.com/owa/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://mail.mydomain.com/ews/exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>mail.mydomain.com</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://mail.mydomain.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.mydomain.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mydomain.local</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mydomain.local</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mydomain.local</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mydomain.local</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mydomain.local</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mydomain.local</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mydomain.local</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mydomain.local</EcpUrl-extinstall>
<OOFUrl>https://mail.mydomain.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://mail.mydomain.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://mail.mydomain.com/OAB/a9a90db6-fd7f-492b-9e29-4848f16cae2f/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>mail.mydomain.com</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://mail.mydomain.com/ews/exchange.asmx</ASUrl>
<EwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://mail.mydomain.com/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://mail.mydomain.com/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=mydomain.local</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=mydomain.local</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=mydomain.local</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=mydomain.local</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=mydomain.local</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=mydomain.local</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=mydomain.local</EcpUrl-photo>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=mydomain.local</EcpUrl-extinstall>
<OOFUrl>https://mail.mydomain.com/ews/exchange.asmx</OOFUrl>
<UMUrl>https://mail.mydomain.com/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://mail.mydomain.com/OAB/a9a90db6-fd7f-492b-9e29-4848f16cae2f/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
</Protocol>
</Account>
</Response>
</Autodiscover> -
Event ID 1001 Bug check Occurred, After updation of Kaspersky Windows 7
Hi,
Recently I have updated my Anti Virus Kaspersky 10 on my Windows 7 Ultimate System 32 bit. After that it restart automatically again and again. Then i restore it on Last known good configuration. It resolve the issue. In event viewr i found out the
Error 1001 Bug check ..
I exactly want to know that what happened to my system . For this How can i send my dmp files to support team .
I have face the problem non my multiple systems but not all .. .
Please guide me asap .The following log occurred
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000c9 (0x0000024d, 0x9047b25a, 0x8d5ed0b8, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041714-22230-01.
when i run verifier.exe
and select " Create standard Setting" then select "Automatically select drivers build for older version of windows" and press Next
it display the Kl1.sys driver
what does it means .. is there any problem with this file? -
How to remove / uninstall Exchange 2013 Microsoft Document.
Dear Support,
We have just finished a complete migration from Exchange 2013 to Office 365 Exchange Plan.
Our on-premise Exchange 2013 has been powered off for the last three weeks and we are now ready to proceed and remove and delete Exchange 2013 from our Windows 2012r2 domain.
Our domain is as follows :
Windows 2012r2 ( 2 x Domain Controllers)
Exchange 2013 ( 1 Server with around 80 mailboxes and some PF)
I cant seem to find an official Microsoft guide on "How to remove Exchange 2013 completely"
Once again my exchange server still has all of its database etc, we have simply power it off and are ready to uninstall it, I just a MS Guide to follow, I've seen loads of various posts but no official instructions.
Cheers
RogerHi Roger,
Thank you for your question.
By you state, Exchange 2013 has been powered off for the last three weeks, so we think message flow and PF have no problem on office 365. We could refer to the following link to remove Exchange 2013:
https://technet.microsoft.com/en-us/library/ee332361(v=exchg.141).aspx
Notice: This is a link which is about Exchange 2010, but it also apply to Exchange 2013.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support
Maybe you are looking for
-
Statistical Indicator check in MM pricing.
I have not put a statistical indicator in MM pricing still.The condition shows as statistical.Can you help me to find how this statistical indicator is autogenerated.
-
Restoring deleted photos from lightroom hard drive
If my photos were deleted from my lightroom hard drive, what is the best method to re-import or restore my "back up photos" back into my drive and original catalog?
-
More elegant solution for error "Current version of data in database..."
When two users try to manipulate the same record in a form, one of them gets the "Current version of data in database has changed since user initiated update process." when updating. I'd like a more elegant solution (or prevention) of this situation
-
Process for handling customizations when patching.
Does anyone have a proven process for handling customizations when patching an instance?
-
Problem in executing PHP from a JSP page
Thank u " gimbal2 " for ur reply. I have already configured those things(connecting Apache and Tomcat with Tomcat connector mod_jk). Now i have written a .jsp file which includes a .php file. The server script in the .jsp file is getting executed but