Bug CSCun42967 fixed: ISE 1.2 : SNMP process stops randomly

As of June 9th, the status of this bug is "Fixed" with "Known Affected Releases" being 1.2(0.899), which is the one we are running.
Known Fixed Releases is (0) and then there is a link to the download area where I can download an update to 1.2.1. The release notes does not mention bug "CSCun42967"
Does anyone know if this bug has been fixed?

Hi,
I just ran into the same issue.
I would assume that if it was fixed in 1.3 it would be mentioned in the release notes as resolved caveats. Can anyone confirm the problem is fixed in 1.3?
Soren, have you upgraded and is the issue resolved?
Thank you :)

Similar Messages

Anyone aware if the battery life (in ML) "bug"is fixed ?

Is anyone aware if the battery life (in ML) "bug"is fixed yet, Or is it something that happens toa ll all instalaions and we have to live we it?

It's not a problem here. I'm not sure that it's a bug. I helped someone in this forum on an issue like this and the problem was linked to the use of a 3rd party software using too many processing cycles.
Activity Monitor is a good tool to identify such misbehavior.

FF has become useless and nothing but bugs and fixes

Comment, <br /> See also similar question with some answers
* '' 'save as' redownloads the data '' [/questions/986667] ~J99
you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double.
while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function
FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7,
the repeated crashes are well known without a fix,
the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function.
the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data.
Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster.

To answer your questions here:
<blockquote>you cannot right click save as on an image, after the image has been dl already to save it FF re-downloads the image again. Noone can produce a config setting that corrects that. so if your paying for data FF is causing you to pay double. </blockquote>
I'm not sure I understand this. When I click save image as then try again it works fine for me. Can you clarify what you are trying to achieve?
<blockquote>while something is DL most of the time the dl stalls. You now cannot pause and resume a dl to get it going again, the old Dl dialogue box had a pause function, the new one 'right-click' shows a pause but its grayed out and does not function </blockquote>
It is better to use an external Download Manager (DM) if you are on dialup or have an unreliable connection.
An external Download Manager offers better support for resuming interrupted downloads than the built-in Firefox DM.
You can use the FlashGot extension to integrate an external Download Manager in Firefox.
FlashGot: https://addons.mozilla.org/firefox/addon/flashgot/
<blockquote>FF cannot handle multiple tabs anymore, if you open multiple tabs it freezes FF and you get a slow script error. But the same tabs can be opened in an old version of IE 7, </blockquote>
This is most likely the way Firefox is set up on your end. What add-ons are you running since I don't see any listed. I need some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
<blockquote>the repeated crashes are well known without a fix, </blockquote>
Again this is specific in your case. Follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
[[Image:SubmittedCrashReports-Win7|width=520]]
<br><br>
<blockquote>the new version seems to have numerous bugs without fixes, or explanations that you need some add-on instead of a FF function. </blockquote>
I see you have Fx 26 installed and not the latest 27.0.1. See what's new with Firefox in version 27.0.1 http://www.mozilla.org/en-US/firefox/27.0.1/releasenotes/
<blockquote>the mere fact that FF cause double data usage without a fix or explanation is beyond inexcusable. Payinf for double data because of a code error is unbelievable. test i opened IE went to a pg open 3 tabs saved the images, and did the same in FF and it used 3.23 times more data. </blockquote> Double data usage? Are you talking about a smart phone data limit or your RAM usage?
<blockquote>Every since that Tor / FF debacle when the old versions were declared no good every version of FF since then has had to many errors without fixes that it has became an industry joke. The fact that chrome and IE or better browsers now speaks volumes. I am no code writer, but since that time, every version is so slow and bug prone, that what ever attempt to say face or redemption has been a disaster. </blockquote> Tor and Firefox? What are you talking about?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again.

ACR 7.x known bugs and fixes

Since Adobe stopped supplying Camera Raw downloads, I've noticed that it's become harder to track bugs and fixes. Hopefully, someone here can put me straight on the current state of play.
Can anyone summarise the well-known problems with version 7, and when they were fixed (or are still ongoing)? Is there a 'changelog' somewhere? What is/are the main outstanding issues at the moment?
Unfortunately, I'm getting to that age where my short–medium term memory isn't very good at retaining this sort of information, so it's good to have it written down!

Jeff,
I have been dealing with this since November. Steve G knows about it but hasn't had time to do anything. Here's the deal...I am on Windows 7 and Photoshop CS6. I shoot with a Canon 7D and G11. I do all my initial work in the metadata template...my own info, description, keywords, location, etc. etc. This creates an .xmp file. When the update from RAW 7.2 to 7.3 came through in November, I downloaded it, as I have all other updates. Then, suddenly, all images in folders with RAW files that had ANY metadata applied, would regenerate endlessly. This only happens with RAW files, not with folders containing jpegs or tifs.
I tried resetting preferences. I tried creating new folders. I have asked if this problem is seen with Nikon RAW files and I'm not sure there has been an answer. I think people have recreated this even with DNG files tho I am not sure. I do know that someone in Adobe has recreated it.
I then discovered that previous .8bi folders were no longer readily available. Getting to one is way, way, way above my ability and involved all kinds of ridiculous backflips but I finally got one. Then followed a solid week of me trying replace the 7.3 .8bi file with the 7.2. Of course, with no instructions, I was putting the wrong file in the wrong folder (32 bit and 64 bit). When I finally got THAT straightened out, it still didn't work. It took someone at Adobe taking over my computer to successfully revert to 7.2.
I lost hours and days of work time trying to deal with this. Meanwhile, should I buy a new camera, I won't be able to see my own RAW CR2 files and will, instead, have to convert to DNG, which, frankly, I find to be a royal pain. Am I peeved. You bet I am. I've been asking, pleading, begging for something to be done since November. Some thoughtful soul suggested I try updating to 7.4 to see if it fixed the problem (the 'fixed problems' listed for 7.4 does NOT mention the recalibration). You can understand, after the problems I had in November, why I will NOT do this until I am absolutely sure the current, latest update has fixed my problem. And I will NOT spend another two hours on the phone with adobe alleged tech help to finally get someone in India who doesn't know what I am talking about. This forum has been far more helpful but please underestand, I am an old school film photographer who has had my share of problems understanding this digital stuff and mucking around with the basic technology of my computer only leads to horrifying outcomes for me.
Jeff, are you with Adobe? Can you look into this?

[svn:fx-trunk] 5114: Fix FxRadioButton doc bug and fix the bug fix I messed up yesterday.

Revision: 5114
Author: [email protected]
Date: 2009-02-27 12:50:47 -0800 (Fri, 27 Feb 2009)
Log Message:
Fix FxRadioButton doc bug and fix the bug fix I messed up yesterday.
QE Notes: mustella gumbo/RadioButtons passed
Doc Notes:
Bugs: SDK-19475, SDK-19531
Reviewers:
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19475
http://bugs.adobe.com/jira/browse/SDK-19531
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxRadioButton.as

Hi i need to send bug to fix it from /opt/SUNWexplo/bin/explorer

Hi i need to send bug to fix it from /opt/SUNWexplo/bin/explorer ...simply executing the command will generate any files anywhere in the server..or it will give the output in the screen only ..i need to send the output of the command ..help me plz

Public InfoDoc 203335 is the README for Sun's Explorer.
[http://sunsolve.sun.com/search/document.do?assetkey=1-9-82329-1|http://sunsolve.sun.com/search/document.do?assetkey=1-9-82329-1]
That document clearly states that any communication about that software tool needs to go to the email alias that is provided in that InfoDoc.
All other communications to anywhere else (such as to this forum) will be ignored.
Though if you had read the Explorer FAQ or its User Guide, you would have your answer as to where the output files might be. The FAQ and the U.G. are also linked in the README InfoDoc.

Subscriptions for fimware/software new releases, bugs and fixes

Hi,
Where can I subscibe for MDS 9000 Firmware/Software releases, bugs and fixes?
Thanks,

You have the "Cisco Notification Service" tool where you can setup a profile:
http://www.cisco.com/en/US/customer/support/tsd_most_requested_tools.html
- Filiph

What bugs are fixed?

Is it possible to find out which bugs apple thinks they have fixed with a release of their software? I also have this issue with front row: http://discussions.apple.com/thread.jspa?threadID=485117&tstart=15
and from what I have been told, QuickTime is really the 'engine' behind playing music and videos and the ITunes (for example) is just a "skin" over this engine. Perhaps this is not true. Anyway, I would like to find out if the recent release of QuickTime fixes this bug. Also, is there anyway to find out from Apple if they plan to ever fix a particular bug? The only thing I use my mini for is as the head of my home theater, and the only reason I would upgrade is because they plan to fix this bug.
BTW, up until 3 months ago, I was a lifelong PC user. I thought that those PC/Mac commercials were really funny. Then I got a mac. All those people who had somehow convinced themselves that macs are more stable/secure/easier to use/etc. than a PC are just fooling themselves. I can't believe how much trouble I have had trying to do simple things and how much obfuscation I have gotten from people at the apple store, tech support. Just for grins, anyone here who thinks that mac is so great, try to play a song encoded as .flac in ITunes. Even better, try to get it to play two in a row without a gap between them. Then, go to an apple store and ask one of the 'geniuses' how easy that is to do.
Sorry for the rant... I feel better now.

Apple does not announce what bugs they fix. They almost never do for any of their computers either.
The current update was a security and minor bug fix, no major new additions or substractions.
The only way you can find out what updates do is to read through other websites where people "autopsy" the upgrade software and post what they find different in the code. Those are not highly reliable because Apple often includes things in their software that are not activated, just idle code.
If you click on the Apple links, all you will get are a direct link to the Update page from the users manual, to explain how updates are done, and a general message stating this is a "security and stability update."

Routing and DNS processes stop - IOS 15.1(4)M9

Hi all,
I have an 1841 router acting as ADSL gateway. It has maxed out RAM and HWIC-1ADSL module installed.
Some time after upgrade from IOS 15.1(4)M6 to IOS 15.1(4)M9 the router started to behave somewhat strange. Every 3-5 days routing process stops, that is if I do "sh run" I get "no ip routing" in configuration which wasn't there before. It appears that config was not edited by anyone either. On top of that router stops resolving DNS. A simple reboot fixes the DNS issue.
I get following in the logs (sh log):
003801: Jan 2 05:39:13.569 AEST: %SYS-3-CPUHOG: Task is running for (2004)msecs, more than (2000)msecs (1/0),process = DNS Server.
-Traceback= 0x63BB1550z 0x63BB1BF8z 0x610C92F8z 0x610C935Cz 0x610CA4FCz 0x61306CC8z 0x61306DD0z 0x61309AD8z 0x6130B11Cz 0x62C873F4z 0x62C873D8z
003802: Jan 2 07:59:53.603 AEST: %SYS-3-CPUHOG: Task is running for (2004)msecs, more than (2000)msecs (1/1),process = DNS Server.
-Traceback= 0x63BC658Cz 0x63BB1530z 0x63BB1BF8z 0x610C92F8z 0x610C93B4z 0x610CA4FCz 0x61306E10z 0x61309AD8z 0x6130B11Cz 0x62C873F4z 0x62C873D8z
Has anybody experienced something like this?
Is this a 15.1(4)M9 issue?

Hi Alex,
Based on the above logs Spurious access is an attempt by Cisco IOS software to access memory in a restricted location. An example of system log output for a spurious access is shown below.
000059: Jan 3 12:27:36.189 AEST: %ALIGN-3-SPURIOUS: Spurious memory access made at 0x631586D4z reading 0x1C
000060: Jan 3 12:27:36.189 AEST: %ALIGN-3-TRACE: -Traceback= 0x631586D4z 0x631768E8z 0x63176998z 0x63177590z 0x631C2438z 0x631C2658z 0x62FE3ED0z 0x62FE4258z
Cause
A spurious access occurs when a process attempts to read from the lowest 16 KB region of memory. This portion of memory is reserved and should never be accessed. A read operation to this region of memory is usually caused when a nonexisting value is returned to a function in the software, or in other words, when a null pointer is passed to a function.
Cisco IOS Software Handling
Depending on the platform, Cisco IOS software handles spurious accesses differently. On platforms where this is possible, the Cisco IOS software code handles these invalid accesses by returning a value of zero and recording the event. If this is not supported on the platform, then the router will crash with a SegV error. Since any spurious access is inappropriate, spurious accesses always point to a bug.
You may also want to have a look at below document.
http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-120-mainline/15103-spuraccess.html
In my opinion I think you are hitting a bug here.
HTH,
Nikhil

Scheduled daily backups of DMM fail - Backup/Restore process stops running

Hi, I have been testing the scheduled backups within the DMM AAI and have found it's performance to be unreliable.
Specifically I am performing FTP backups to a remote network location. Manual one-off backups complete successfully without any issues, and scheduled backups occur on the same day, however successive (reoccuring) daily backups don't happen and the Backup/Restore process seems to stop running. I have checked the backup logs but these don't provide any insight as to why the backup process stops running.
Has anyone else encountered this? I am running DMM v5.2.0.25.
Mike

I am having a similar problem. Is there a method to restart the backup service without having to reboot the entire DMM Server?
Note that there is no method via the AAI menu system, and the Web Admin console services section is not clear as to whether it will reboot the entire server (which is NOT an easy thing for me to get away with here).
Restarting the 5.2.3 DMM Server (not JUST the service??)
=========================
I have now learned (per a Cisco engineer), that the 'Scheduled backup services' in the screencap above, is normally in the 'stopped' status "by design", and that it will not show as started in this UI unless the DMM server is actually in a backup.
==============================================
=========================
My backups now work correctly. I think that the original problem was my NTP settings, which are now fixed.
=========================================================

SNMP connection stops

Hello -
I am trying to get SNMP working for the purpose of performing system monitoring on our Mac OS X 10.4.7 Sever (Dual G4). I have run snmpconf -i successfully and am using an snmp.conf file located in /usr/share/snmp (I found that If I used an snmpd.conf the service would not start) SNMP process will start and run. I can connect using both our monitoring tool and the snmpget command. I can get system information. However after approximately 1-2 minutes, I can no longer connect using any method. If I restart the snmpd daemon, I can connect again but only for the stated time period.
Any possible solution here?
Thank you for any help,
ehowman

Tiger Server upgraded to 10.4.7, or the boxed 10.4.7 (Universal) released this summer?
If you have developer tools installed, run "sample" on it when snmpd hangs again ("sudo sample snmpd 10 10"), just before you call snmpwalk or snmpget.
Macs. Lotsa macs.

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203

Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

Running Win 7; FF DL process stops at DL of "stub". Help.

When I try to download and install FF on my Windows 7 machine, the process stops after [apparently] successful download of Setup Stub 29.0.1. I have tried repeatedly to do this, always with the same results. To proceed would be, by definition, insanity.
My Windows 7 machine(s) has/have all available updates.
100s of 1000s of user-attempts must be experiencing the same phenomenon.

You can get the full, off-line installer package here.
http://www.mozilla.com/en-US/firefox/all.html

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform. The App Store shows there is an upgrade, so I click the download button. After about 2 hrs the process stops and an Error (102) appears on the screen. Any idea what goes wrong? THX

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THX

ahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering.

Bug CSCun42967 fixed: ISE 1.2 : SNMP process stops randomly

Similar Messages

Maybe you are looking for