Bug - Equals operator does work with Boolean, UUID and EUID

Dear sirs,
The ACS API has a serious bug that does not allow us search using the equals operator when the column type is Boolean, UUID or EUID. It is a serious API inconsistency, once the result returns empty even when you have records matching the criteria. A workaround is to use the "Contains" operator, but it's dangerous and may bring some unexpected results.
This problems seems to be caused by the com.adobe.adept.util.PredicateUtil, line 177, due the lack of use of the method "SQLTextUtil.getSearchableFieldExpression" that makes the "Contains", "StartsWith" and "EndsWith" work for the previously cited cases.
Do you know whether there is any prevision to fix this bug?
Thanks in advance,
Marcos

It must be a bug- I tried it on UCCX 7.0(1)SR03 and it's working there.

Similar Messages

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

My Xlite 4.0 software does not work with Jetpack but does work with droid hotspot can this be fixed?

My Xlite 4.0 software does not work with Jetpack but does work with droidx hotspot can this be fixed? I have attached a packet capture for packets from DROIDX with android 2.3.4 marked as XliteWith3G.cap and a packet capture for Xlite with the Jet pack XliteWith4G.cap obiviously same packets coming from Xlite different results depending on WiFi connection.

Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

Same problem here...

I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!

I have a version 1 iPad. I would like to be able to use my LCD projector to display content to my students. I have the dongle to attach to the projector, but can't make it work. The process DOES work with my friend's iPad 2. Any advice? Thanks!

Expanding on what deggie said, with an iPad 1 the app you're using must support video out. Only the iPad 2 can mirror the screen. The apps included with the iPad that output to external monitors are given here:
http://support.apple.com/kb/HT4108
For third-party apps, consult the app's documentation or contact the developer.
Regards.

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

My printer does not work with firefox but does work with explorer

While using ebay I tried to print out a mailing label, and fox fire does not work with it anymore. My printer does work with internet explorer ?

What printer? Does the page appear correctly in Print Preview? What happens when you try to print?

Does the 932C HP printer with 2 sided printing accessory work with window 7 and office word 2010?

(model#C6463A-double side, printing accessory), for the HP 923C printer? Is it real slow printing? Does it flip by itself or do I have to flip it? Also will the printer with the accessory work with windows 7 and office word 2010 to type 4 pages per sheet, like a book? Thanks and please help me!

Hi @Happyforhelp
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Deskjet 930/932c Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

T61 worked with Dual Monitors and now it does not

I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??

The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention.

My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

My sound has gone a wall , I've tried everything including a total reset . However the sound does work with head phones , any ideas ?

My sound will not work , I've tired all the simple stuff, including total delete and reset everything . Sound however does work with headphones . Any suggestions ?

http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Which version of Windows 7 does work with BootCamp?

Hello guys,
I have a lion macbook, but I heard that it does not work with xp anymore (and I do not have an old backup with xp).
So what kind of windows 7 can I use? A simple OEM Version, a Retail version or do I need a full version?
On the web I read something about some Retail Versions, they won´t work with BootCamp?
Thanks for your answer!

http://lmgtfy.com/?q=boot+camp+requirements

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Bug - Equals operator does work with Boolean, UUID and EUID

Similar Messages

Maybe you are looking for