BUG: Face recognition data not saved to images.

i have the option to automatically save XMP data into the images activated.
so all keywords and metadata changes are not only saved to the catalog but also into my DNG and TIFF images.
now this works fine for everything except the new face recognition data.
i mean the areas (rectangles) where the faces are.
i guess the problem is that the images already contain the keywords (names) of the persons in the images.
what i did was using the rectangles to identify the persons in the images. drawing rectangles around their faces and name them.
this info about the rectangle positions is NOT automatically stored in the image files. not after hours of letting LR run idle.
this info is only stored when i manually save (CTRL+S) the images or do something other to the metadata (like adding NEW keywords to it).
so in short: just adding the face region data (the rectangles) will not trigger the automatic XMP save function when the name keyword was already asigned as keyword to the image.
that´s very bad and must considered a bug in my opinion..
i don´t like to rely on the LR catalog only. it´s unsave even with backups.
i want that the metadata info is stored in the images.
also when i give away my images i want that the metadata is in the images.
that´s why "automatically save XMP" is always active and very important for me.

I don't have any info but repost your original info at this site. Supposedly Adobe reads this and it should not get lost in the clutter I have posted a few bugs there and they were acknowledged but not fixed but Adobe seems to be pretty good at fixing potential data loss bugs/problems which I consider this to be if it is working as you describe.
Photoshop Family Customer Community

Similar Messages

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

Data not saved in database

hi,
i'v a prob. that once i create quation through va21 then it create and saved data.
now when i create sales order through va01 then it show data saved and gave the sales order no.
but when i 'm going to change it then message comes order not in data base.
when i saw the data in table like vbak/ vbap then i found no data.
what is the prob.
pl. help me.
mukesh

Hi Mukesh,
May be the data is not saved at all. Use TCODE SM12 and SM13 to check if there are entries for the corresponding table under processing
Regards

Response data not saved in PDF

Dear All,
I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
I saw my message in the form when the WS is finished but I saved the PDF on my PC.
When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
Thanks to help me
Kind regards
Véronique.

Dear all,
Can someone help me ?
All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
If I change the field (add some character after the return value from SAP) and I save, the value is kept.
Could someone tell me how to do ?
My button is an Execute one with the data connection on my web service.
If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
It is important !
Thanks
Kind regards
Véronique

Hierarchy Data not saved after Hierarchy Load

Hi Gurus,
I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
Can we process the Dimension explicitly after the Hierarchy load again?
Does anyone have an idea about this?
Any help is appreciated.
Thanks,
Abhishek

Abhishek,
Double check whether /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
(when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
Thanks

Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure. What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

Data not saving in flowable form

Hi,
I have created a form where there are flowable and positioned parts. In the attachment section, data entered into Attachment A (flowable) seems to save, but after saving, closing and re-opening, the data has not saved. The data entered into Attachment B and the rest of the form does save.
Can I send the file to someone to have a look?
Thanks.

Please send your form to [email protected]
I will try to look into the issue..
Nith

File- XI- IDoc: Idoc header data not saved correctly

Hi guys!
I have a very strange problem:
I have a file to xi to IDoc scenario. Everything seems to be fine, IDoc is created in target system, but with strange error: <MESCOD>XX</MESCOD> segment is not written in IDoc header segment. This segment is available in message sent to ECC (after mapping), so there is no problem with ommiting the segment in mapping. But it's not saved.
This scenario worx fine in QA, but not in PRO.
Any ideas, what to look at?
Thanx a lot! Olian

Hi,
check the IDoc which was in PROD. and see the ibound status and actual reason .
depending upon the actual status you can resolve the issue.
Chilla

Slice and 'saving for web and devices' not saving all images in selected area

Ive designed my site in illustrator and now im using slices and save for web and devices.
When I save a slice as a jpeg or gif it saves the text and but not the background image behind it. I haven't locked the background image and all the content is on the same layer in illustrator so why is it doing this and how can I stop it?
Thanks
James

Thanks for your reply. Yes, my Photoshop CS5 is updated to 12.1. I'm running OSX 10.5.8 and have tried viewing in Safari, Firefox, and Chrome with no improved success.
I have been reading these forums for about 3 hours trying to find the answer to this question but am still at a loss. I have found one article here:
http://stackoverflow.com/questions/7974006/overlapping-image-in-photoshop-splice-how-to-fl oat-with-css
which explains using an "absolute" value in CSS to lock images in place. I'm currently working in Dreamweaver to see if it's a common error in Photoshop when resizing browser but is easily fixed on the CSS side.
Any help would be appreciated
Thanks!

Face recognition is not recognizing faces

i just rebuilt my iphoto library today with a mac tech and now my face recognition isn't recognizing faces. any idea what's up?

I feel duped, I bought this new I-Life version specifically for the Faces feature and after giving it 5 good matches for my daughter it spent all night and came up matching virtually every face male or female,even some sculpture and a watch face along with leopards and a few other african animals. Come on, this is pathetic!!!!!!! Can I get a refund?
I had five other family members identified and it listed them as matches for my daughter too....I would have to give up my computer for the rest of the year for it to get a few matches for each.

BUG: Face Recognition splatters Face Tag rectangles all over my Images

hello,
happend a few times with a new catalog.
i run the people view and everything but faces are recognized as faces.
green gras, white walls, blue sky etc.
and i don´t mean a few images i mean 2-4 wrong rectangels per image.... for hundreds of images (i stopped it or it would be way more).
happend a few times now.
also the keywords in the keywording windows do not change when i enter people view.
i mean the windows only shows the keyword of one image and when i change the image in grid view, the keywords of the actual image are not shown. (the window is not updated)
they are also stuck when i close people view. only a LR restarts helps.
i run windows 7 x64
32gb ram
980gtx (latest drivers)

example.... hundreds like these in people view.
not always but it happens.
then i manually have to delete them.
honestly, i think adobe should ask google how to do facial recognition right.

User deleted, data not saved

My administrator deleted my account and made me a new one to fix a printing problem. The printing problem is fixed, but all my files are gone. From what I can gather when she deleted my old account she did not choose to save the files (there is no 'deleted user' in the user folder, and no disk image). I tried to use a program to recover deleted files but it found nothing. I used Virtual Lab. Any ideas on where the data could be, and how it might be recovered? The files are primarily rtf and doc.

Most recovery programs are set up so you can read pretty much any drive. They are set up so even if your drive won't mount normally and is in its last moments you can sometimes read data. If you're not seeing files after a simple removal of a user account that's what makes me wonder if some extra step was taken. Deleting an account usually places the old account files in a special folder in deleted users. This still takes up space on the computer so your admin. may have decided to move it to the trash and empty the trash to free up the space. Even then recovery tools should be able to see file remnants (emptying trash just removes all normal reference to the files but the data stays there and can be seen by those special programs) on the drive. There's two reasons (I can think of) for their not being there. One, somebody used secure erase. Two, your computer sees such heavy use that the the space now regarded by the computer as being available was overwritten by other file creation. Ask your administrator if they are in the habit of using secure empty trash. The second case might apply if your computer sees a lot of file creation and you don't have a lot of room on the hard drive so any free space stands a good chance of being randomly used.
I haven't actually used one of those recovery programs I am also thinking of something I have heard with reference to those programs and that is sometimes the programs will find files but the names are no longer available. I have heard of people recovering lots of files from bad drives but then having to face putting names on all the files again. I may be wrong on this, but maybe you're seeing the files but not recognizing the,. Maybe somebody else with experience using those programs can provide information.

JDev 9.0.3.3 Data not saved to DB when using Non-Transaction DataSource

Hi,
Env: JDev 9.0.3.3/WL 6.0 sp1/Oracle 8i
We have successfully deployed our application in 3-tier(remote mode) in JDev 9.0.3.2. using JClient, EO/VO, EJB Session Facade (BMT).
Now we are planning to use JDev 9.0.3.3 (build 1205)
We are using ejb.txn.type=local and Weblogic DataSource(non-txn).
In JDev 9033, after commit the data is not getting saved to DB. No errors in the log below.
This works fine in JDev 9032.
This does not work with simple Master Detail and also with single row simple form.
==========================================
[281] BaseSQLBuilder Executing DML ... (Update)
[282] Executing DML...
[283] UPDATE CISDBA.DCX_BASE_COST_V BaseCost SET ITEM_STAT=?,TID=? WHERE PART_NUM=? AND MY=?
[284] cStmt = conn.prepareCall(" UPDATE CISDBA.DCX_BASE_COST_V BaseCost SET ITEM_STAT=?,TID=? WHERE PART_NUM=? AND MY=?"); // JBO-JDBC-INTERACT
[285] cStmt.setObject(1, new BigDecimal((double) 2.0)); /*ItemStat*/ // JBO-JDBC-INTERACT
[286] cStmt.setObject(2, "t2733bx"); /*Tid*/ // JBO-JDBC-INTERACT
[287] cStmt.setObject(3, "04782612AA"); /*PartNum*/ // JBO-JDBC-INTERACT
[288] cStmt.setObject(4, "2004"); /*My*/ // JBO-JDBC-INTERACT
[289] cStmt.execute(); // JBO-JDBC-INTERACT
[290] cStmt.close(); // JBO-JDBC-INTERACT
BaseCostImpl: after doDML
BaseCostImpl: End of doDML()...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[291] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[292] BaseSQLBuilder: setSavepoint 'BO_SP' ignored
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
BaseCostInvestCost VO before postChanges...
this.getWhereClause(): null
isDirty() before executeQuery...
this.getWhereClause(): null
isDirty() after executeQuery...
[293] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
[294] EJBTxnHandler: Commited txn
[BaseCostInvestCostViewImpl.afterCommit] Enter
[295] BaseCostInvestCostView2 notify COMMIT ...
[BaseCostInvestCostViewImpl.afterCommit] Exit
[BaseCostInvestCostViewImpl.afterCommit] Enter
[296] BaseCostInvestCostView1 notify COMMIT ...
[BaseCostInvestCostViewImpl.afterCommit] Exit
[297] SubDept2SubProgView1 notify COMMIT ...
[298] InvSubDeptLOV1 notify COMMIT ...
[299] SubProg2SubDeptView1 notify COMMIT ...
[300] SubProgramLOV1 notify COMMIT ...
[301] StdCostView1 notify COMMIT ...
[302] AltCostView1 notify COMMIT ...
[303] PlantCodeView1 notify COMMIT ...
[304] PaperCarView1 notify COMMIT ...
[305] InvestCostItemView1 notify COMMIT ...
[306] SavedSearchView1 notify COMMIT ...
[307] AltCostView1_BaseInvestToAltViewLink_AltCostView notify COMMIT ...
[308] InvestCostItemView1_BaseInvestToInvestItemViewLink_InvestCostItemView notify COMMIT ...
[309] PaperCarView_BaseCostTrackedVehicleViewLink_PaperCarView notify COMMIT ...
[310] VehicleProgramLOV1 notify COMMIT ...
[311] SubDeptLOV1 notify COMMIT ...
[312] Transaction timeout set to 28800 secs
[313] [NavigationEvent: BaseCostInvestCostView1 From 0 to 1]
[314] Column count: 14
[315] ViewObject : Reusing defined prepared Statement
[316] Binding param 1: 769661
[317] Binding param 2: 2004
[318] [RangeRefreshEvent: AltCostView1 start=-1 count=0]
[319] Column count: 13
[320] ViewObject : Reusing defined prepared Statement
[321] Binding param 1: 769661
[322] [RangeRefreshEvent: PaperCarView1 start=0 count=6]
[323] Column count: 4
[324] ViewObject : Reusing defined prepared Statement
[325] Binding param 1: INV37
[326] [RangeRefreshEvent: InvestCostItemView1 start=0 count=1]
[327] [NavigationEvent: AltCostView1 From -1 to -1]
[328] [NavigationEvent: PaperCarView1 From -1 to 0]
[329] [NavigationEvent: InvestCostItemView1 From -1 to 0]
========================================================

Hi Carsten,
I tried to reproduce your problem, but couldn't. Let me explain what steps I executed and perhaps you can advise where I've not matched your steps.
--Using build jdeveloper 9.0.3.3.1203, I built a new bc4j project containing a dept-emp default bc4j project (deptEntity, empEntity, deptView, empView, deptempFKAssoc, deptempFKViewLink, ApplicationModule).
--In dos shell, I went to the directory \jdevdir\jdev\bin and ran setvars -go to set the correct jdk version
--In the dos shell, in the directory \jdevdir\j2ee\home I executed the following command to install oc4j:
java -jar oc4j.jar (defaults pswd to welcome for admin)
--I remoted the appmodule to EJB Session Bean (BMT) and created a new deployment profile using the 9ias configuration for the application module.
--I deployed the bc4j objects to oc4j
--I created a new project
--In this project I created a new jclient master-detail form using the above project's application module for the data model
--I saved all and compiled the jclient project
--I ran the jclient form and inserted a master record
--I committed the transaction successfully
--I browsed records, then edited a record
--I committed the transaction successfully, then browsed.
Is there something I've missed? Did you migrate your project and not start by creating a new project? Is there something special about the database schema you are using?
Thanks,
Amy

Shared Object data not saving?

I tried adding a "save progress" function to my latest project using the shared object class, yet it's not working. All of the information that should be saved, traces as undefined. I looked through some older projects, and the save functions in those projects are working fine. Any ideas on what might be the issue?

use:
import flash.net.SharedObject;
var saveTest:SharedObject=SharedObject.getLocal("testFile","/");
saveTest.data.sample="testing"
trace (saveTest.data.sample)
and no, you cannot explicitly control where the sharedobject is saved.

People and Face Recognition tags not showing up under People page after converting to PSE11

Hi Forum
Upgrade from PSE 10 to PSE 11
Beware, having just spent over 3 hours using the face tagging feature in Elements 11 (because it does not use people tags from earlier versions to populate the new People Tab). I can only say the result was less than useless. I now have over 1200 images tagged with the wrong people and multiple wrong people at that. And worse still the person that should have been tagged is not there at all!
I noticed that during the tagging process the image displayed to provide a name for is not the image when selecting full screen view - it actually displays another image. So my guess is it is not actually tagging the face you see but applying the tag to the image it actually thinks it is.
Therefore the result is utter garbage.... What a waste of time and effort. Not happy at all. When will Adobe release working software, hard lesson learned here.
Regards
David
Message title was edited by: Brett N

Hi Andaleeb
Yes this is definately frustrating - what should be a simple process during the upgrade from 10 to 11 is a painful manual task to correct afterwards.
Okay I restored the catalogue which contained the original people tags. But because they were called named 'Family' they are not treated as People in People Tab. So I changed the name Family to People and then yes the images started to appear in the People Tab. But there are groups of people such as my wife and sons who are not imported into the People Tab because (I think) they are a sub level below me. So are ignored in People import process. Viewing images in Media View shows they are marked with a 'Group' icon but still these do not show up in People - Groups. The tags are shown when clicking 'Groups' but when selecting one shows the message 'no people exist in this group'. So how do i get them in? I can't find a way of changing the person concerned to have a non group tag like the other images that were recognised as people. I hope this makes sense.
Help appreciated.
Regards
David

BUG: Face recognition data not saved to images.

Similar Messages

Maybe you are looking for