Bug Fix for White Balance Issue (When ?)

Dear Apple:
When can users expect a patch for the bug that "crept" into Aperture late in the development cycle that seriously effects the white balance tool?
This bug is obviously a major concern and issue for most professional-level photographers; and, quite frankly, prevents Aperture from being used in a professional capacity with regard to RAW decoding.
Cheers

Excuse me, John:
But, quite frankly I don't think you are in any position to tell the users of this form how they should feel. Most users, who happen to be high-end prosumers or professionals such as myself, have paid a great deal of money on a piece of software that was supposed to live up to certain, basic expectations. Unfortunately, that software did not. As such it cannot be used in a professional environment.
Subsequently, an update was provided to address all the concerns that users expressed. Unfortunately, that update created a major issue with regard to the white balance of RAW images. Yet again, this expensive piece of software is nearly useless in a professional environment.
Let me ask you this: "if you were a gardner and paid several hundred dollars for a lawn mower, only to discover that it cut your clients' grass unevenly, would you continue to use it? Would you continue to be patient after taking it into the repair shop only to have it still screw up your lawns? Would you not be on the phone with the repair shop constantly until it was fixed?"
Unfortunately, Aperture is a good idea that has a flawed implementation and that NEEDS to be addressed! So, I will continue to ask Joe and Steve and the others at Apple when will this piece of software actually live up to the expectations set forth by the company that produced it!

Similar Messages

  • Is there a fix for the 'mute' issue when receiving/makings calls?  I can hear them but they can't hear me..

    I've read about this being a common issue with the iPhone 4S, particularly with iOS 5.1.1.  I spoke with someone at apple tech support and did a hard reset - no luck.  She mentioned that replacing the phone was a possible solution but I'd rather use that as a last resort - I haven't heard the greatest things about turn around time with apple's warranty.
    Is there a fix for this?  The person on the other end (whether it's an outbound or an inbound call) can't hear me at all.  I can hear everything fine.  Speakerphone works fine.  Facetime works fine.  Checked my mute button, on/off/on/off, no luck.  Checked all my settings and can't figure it out.
    Any ideas?

    I ended up getting a new phone, straight through Apple.  I called their technical support and went through all he basics again and they decided to replace it.  Was a pretty quick process - after defaulting and resetting the whole phone (about 2 hours),  I called them back to inform that there was no change, so they set up the order.
    I had to give my CC# so they could hold a charge on it (in case I didn't send my old phone bach, which they sent me a pre-posted package to send it in anyway).  Had a brand new iPhone 4S in my hands in 4 days, which was pretty decent.  I had uploaded everything previously to iCloud, so setting up the new phone was a snap.
    Only thing I really didn't like was they charged me almost 30 bucks for shipping or processing, or something.  Not so sure that should have been my responsibility after spending so much on a brand new product, only to have to have it warrantied after, like, a month.

  • When will apple release an update with bug fixes for ios 6?

    when will apple release an update with bug fixes for ios 6?

    When indeed. I purchased iPhone 5 64gb and have so far experienced the following issues/Bugs
    1. Flash on camera out of sync
    2. Cannot connect to some WIFI Bluetooth drvices
    3. Missing Album Artwork on iTunes album view
    4. Buggy and confused maps/satnav
    5. iMessage comes and goes
    6. Battery Life *****

  • [svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

    Revision: 21394
    Revision: 21394
    Author:   [email protected]
    Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
    Log Message:
    bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
    get the sessions id before we invalidate the duplicate session.
    Checkintests pass
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

    For our profect I think this issue was caused as follows:
    Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
    This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html  two remote calls arriving before a session is created will cause 2 sessions to be created.
    Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
    Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! )  caused the error when activated after a few hours.
    I guess the session expires on the server and the error above occurs on activation.
    So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
    All duplicate http errors are silently caught and reported.
    Fingers crossed we won't get any more!

  • Since moving to Maverick and the new updated of Keynote, I have a constant problem when typing in a text box, the program crashes. Is there a bug fix for this. Drives me nuts.

    Since moving to Maverick and the new updated of Keynote, I have a constant problem when typing in a text box, the program crashes. Is there a bug fix for this. Drives me nuts. Like many who can type quite quickly but at secretarial level, the text box freezes, nothing works and you know what's coming...crash!
    This is most annoying. Is there bug fixes for this. Apparently I have the current updates and this problem still exists. Is it a Maverick bug or Keynote.
    Barry

    How did you install Mavericks, as an update ontop of the previous OS or did you wipe the drive and install clean?

  • After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    Try to reset the iPod by  pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset, but it can clear some glitches after installing new software or apps.

  • Ongoing White Balance issue

    In a video I just shot there is a slight shift in exposure in the image - just when my subject moves a couple times. It is shot with a white background and she is wearing black. I think this is a white balance issue. Which filters or fixes are best for this? I have tried a few filters and they mostly do it but you can still see the couple times my subject moves and the light/exposure changes. I realize that I need to film it better, but can it be fixed. Thanks for any insights.

    Search for "flicker fixer premiere pro".  I don't use any of them so you will have to see what works best for you.
    You can use the Fast Color corrector in PP to change exposure.  You will have to make key frames.  If you're not sure how to use key frames and how to use the Fast Color corrector it's time to open the manual.

  • [svn:fx-trunk] 5170: Round 2 of bug fixes for the Spark skins for Halo components.

    Revision: 5170
    Author: [email protected]
    Date: 2009-03-04 17:50:32 -0800 (Wed, 04 Mar 2009)
    Log Message:
    Round 2 of bug fixes for the Spark skins for Halo components. Thanks to Alex for help with the data grid issues.
    Bugs fixed:
    SDK-19655 - Setting rowCount property on DataGrid causes extra blank row to be displayed
    SDK-19652 - Items in a DataGrid do not line up after scrolling.
    SDK-19605 - disabled Halo ColorPicker with Gumbo skin draws too dark
    SDK-19596 - When you have a single button on an Alert, the left edge looks flatter than the right
    SDK-19585 - Menus compiled with the halo theme in Flex 4 have a different backgroundColor than in Flex 3
    SDK-19665 - Halo List with Gumbo skin doesnt draw the alternating item color all the way to the right edge of the control if VScrollBar is present
    SDK-19651 - odd header rendering issue on Halo DataGrid with Gumbo skin
    QA Notes: The alert layout code was positioning the buttons/text on sub-pixel boundaries if the width or height of the alert was an odd number of pixels. We always snap to pixel boundaries now, but this may cause bitmap compare issues with Alert.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19655
    http://bugs.adobe.com/jira/browse/SDK-19652
    http://bugs.adobe.com/jira/browse/SDK-19605
    http://bugs.adobe.com/jira/browse/SDK-19596
    http://bugs.adobe.com/jira/browse/SDK-19585
    http://bugs.adobe.com/jira/browse/SDK-19665
    http://bugs.adobe.com/jira/browse/SDK-19651
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/alertClasses/AlertForm.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ScrollControlBase.as
    flex/sdk/trunk/frameworks/projects/halo/defaults.css
    flex/sdk/trunk/frameworks/projects/sparkskins/src/mx/skins/spark/ColorPickerSkin.mxml

  • [svn:fx-trunk] 13169: * Fixes for two FB issues and two regressions caused by recent fixes.

    Revision: 13169
    Revision: 13169
    Author:   [email protected]
    Date:     2009-12-22 14:39:59 -0800 (Tue, 22 Dec 2009)
    Log Message:
    Fixes for two FB issues and two regressions caused by recent fixes.
    QE notes:
    Doc notes:
    Bugs: SDK-24708, SDK-24668, SDK-24827, SDK-24829
    Reviewer: Corey
    Tests run: checkintests, com.adobe.flexbuilder.project JUnit tests
    Is noteworthy for integration: Yes, fixes two FB issues
    Code-level description of changes:
      modules/compiler/src/java/flex2/tools/oem/Library.java
      modules/compiler/src/java/flex2/tools/Compc.java
      modules/compiler/src/java/flex2/tools/Fcsh.java
      modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
        Modified calls into SwcAPI's setupClasses() and
        setupNamespaceComponents() to pass in the SourceList.
      modules/compiler/src/java/flex2/tools/VersionInfo.java
        Added null check to getBuild().
      modules/compiler/src/java/flex2/compiler/CompilerAPI.java
        Modified compile() to only add elements of "classes" to "sources"
        if not already contained.  This covers the case of a Source being
        in the SourceList and the manifest.
      modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
        Modified setupClasses() and setupNamespaceComponents() to check the
        SourceList before the SourcePath when looking up sources.
      modules/compiler/src/java/flex2/compiler/SourceList.java
        Made getPaths() public.
      modules/compiler/src/java/flex2/compiler/CompilationUnit.java
        Modified setState() to skip disconnecting the root's Logger.  This
        fixes SDK-24827 and SDK-24829.
      modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java
        Added sourceList variable, modified procressSources() to
        initialize it, and modified init() to recursively store a
        timestamp for each path in the SourceList.  This fixes SDK-24708.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24708
        http://bugs.adobe.com/jira/browse/SDK-24668
        http://bugs.adobe.com/jira/browse/SDK-24827
        http://bugs.adobe.com/jira/browse/SDK-24829
        http://bugs.adobe.com/jira/browse/SDK-24827
        http://bugs.adobe.com/jira/browse/SDK-24829
        http://bugs.adobe.com/jira/browse/SDK-24708
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SourceList.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SignatureExtension.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Compc.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Fcsh.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/VersionInfo.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java

  • [svn] 3420: Fix for Runtime Configuration issues.

    Revision: 3420
    Author: [email protected]
    Date: 2008-09-30 11:13:54 -0700 (Tue, 30 Sep 2008)
    Log Message:
    Fix for Runtime Configuration issues. If the destination is initialized, then you'll want to initialize the instance when it is created. Otherwise, you want to wait until the destination is initialized. Typically, when using runtime configuration, the destination is not initialized and the instance is not initialized, instead the properties on the instance are set.
    qa: no
    bug: n/a
    checkintests: passed
    Details:
    modules/core/src/flex/messaging/Destination.java
    * add an initialized flag and a method for retrieving the value
    modules/core/src/flex/messaging/factories/JavaFactory.java
    * fix typos in comments
    modules/core/src/flex/messaging/factories/JavaFactoryInstance.java
    * if the destination is initialized, then you'll want to initialize the factory instance when it is created
    modules/core/src/flex/messaging/FactoryDestination.java
    * if the destination was not initialized before the factory instance was created, the factory instance will be initialized when the destination is initialized
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/Destination.java
    blazeds/trunk/modules/core/src/flex/messaging/FactoryDestination.java
    blazeds/trunk/modules/core/src/flex/messaging/factories/JavaFactory.java
    blazeds/trunk/modules/core/src/flex/messaging/factories/JavaFactoryInstance.java

    Hi JBKL, and a warm welcome to the forums!
    For the Ethernet Location... Is that Interface dragged to the top of Network>Show:>Network Port Configurations?
    It may be that the Router needs a Firmware update to keep up with the OS Updates... check online, don't trust any automatic checking feature in the Router.
    Where are we now?

  • [svn:fx-trunk] 10075: Cleanups from the spark text changes and some bug fixes for VideoElement.

    Revision: 10075
    Author:   [email protected]
    Date:     2009-09-08 18:01:58 -0700 (Tue, 08 Sep 2009)
    Log Message:
    Cleanups from the spark text changes and some bug fixes for VideoElement.  Also some PARB changes for UIComponent.
    TitleBar: Changing the skin part type from Label to Textbase
    UIComponent: skipMeasure()->canSkipMeasurement() to be in line with GraphicElement.  This has been PARB approved.
    UIComponent: same with hasComplexLayoutMatrix...this replaces hasDeltaIdentityTransform.  This has been PARB approved.
    StyleProtoChain: cleanup around what interfaces to use
    TextBase: clean up code that?\226?\128?\153s no longer needed.
    VideoElement: Fixing 4 bugs:
    SDK-22824: sourceLastPlayed keeps track of what video file we?\226?\128?\153ve called play() with last.  This way if a user pauses the video and wants to start it up again at the same point, we can call play(null) on the underlying FLVPlayback videoPlayer.  However, anytime the souce changes, we want to null out sourceLastPlayed.  This was causing a bug when someone set the source to null and then reset it to it?\226?\128?\153s previous value.
    SDK-23034 (GUMBO_PRIORITY): This deals with some FLVPlayback quirks around sizing.  I had put in a fix so we weren?\226?\128?\153t setting width/height on the underlying videoPlayer too many times, but apparently we need to make sure it always gets called once.  Hopefully when switching to Strobe we can cleanup this logic...I put a FIXME in to do this.
    SDK-21947/ SDK-22533 - some video files don?\226?\128?\153t always send out a metadata event.  I?\226?\128?\153m not quite sure why this is, but in case this happens, we do a check in the ready handler to see whether we should call invalidateSize() to make sure it gets sized properly.
    QE notes:-
    Doc notes:-
    Bugs: SDK-22824, SDK-23034, SDK-21947, SDK-22533
    Reviewer: Glenn, Corey
    Tests run: checkintests, Button, GraphicTags, VideoElement, and VideoPlayer (some VideoPlayer were failing, but I think it should be fine)
    Is noteworthy for integration: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22824
        http://bugs.adobe.com/jira/browse/SDK-23034
        http://bugs.adobe.com/jira/browse/SDK-21947
        http://bugs.adobe.com/jira/browse/SDK-22533
        http://bugs.adobe.com/jira/browse/SDK-22824
        http://bugs.adobe.com/jira/browse/SDK-23034
        http://bugs.adobe.com/jira/browse/SDK-21947
        http://bugs.adobe.com/jira/browse/SDK-22533
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
        flex/sdk/trunk/frameworks/projects/spark/src/mx/core/UITLFTextField.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Group.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Skin.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/TextBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AddActionInstan ce.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/RemoveActionIns tance.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

  • Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps.

    Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps. This problem started ever since I upgraded to version 5.

    I have downloaded and used the iPod Reset Utility, alot that did. My current state is iTunes on my XP Home with SP3 sees the iPod. When I drag a song to the iPod, the Sync message appears for about 5 minutes, then the Apple symbol appears. But no song has been transferred to the iPod.
    I tried to tap into the XP iTunes database from my iBook, but although it acted like it would add the XP library to the iBook library, it did not. I've got 19 Gs of songs on the XP. If I have to load each song from its original CD to get it on my iBook I'm going to start looking for some other app or device so that I can listen to my music.
    It is a shame, in the old days, Apple techs use to look at what was going on, now it appears they don't, so they never know they have problems until Apple's profits fall.

  • Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

    Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Bug fix for Mac book wireless - problem solved!

    Aparantly there is a rather large number of folks out there who've discovered this dillema with wireless not working very well at this point on the Macbook.
    Well, I can attest there is one very good solution out there for this issue. This application called Sonar Theater from www.sunray.tv includes a bug fix for the wireless connection issues with Macbook in their latest 1.5 release of Sonar Theater.
    I downloaded it, put it into my start up folder and waalaa! problem solved. I've haven't any more issues with dropped wireless since - it's been running constantly for over 2 weeks now.
    I haven't even attempted to touch my router configuration - don't need to.

    Welcome to the better life of Macs. I am using Sonar Theater too and it's been working very well for me. In fact, I'm getting hooked on just texting a message to my Mac book to fire up user sessions now. I think if you give the Mac Book some time however, you'll find that there really is no comparison to PC's. Your life overall is going to just keep getting better as you dig in to the resources available to new Mac users.
    I'm sure it seems confusing to PC users at first, but here's how to set up any application as part of your startup sequence. It really is extremely easy and simple compared to the PC world. Oh and by the way, in reality, Mac users refer to this as your login sequence. So, at login time, you can do a multitude of different things for each user account you might want to set up. Naturally, you can choose to share or not share applications and data between these user accounts on your Mac too....
    Mac OS X 10.3 or later
    1. Log in as the user who wishes to have a login item or as an admin user.
    2. Choose System Preferences from the Apple menu.
    3. Choose Accounts from the View menu.
    4. Click the name of the user.
    5. Click the Startup Items button
    6. Click the "Add {+}" button.
    The item you selected will automatically open the next time you log in.
    there are several ways to get good info from the apple community on tips and tricks as well. you should just try the apple os x web site...here,
    http://www.apple.com/macosx/resources/
    happy mac-ing!

  • HT204210 Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

    Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

    Apple Enterprise Support is aware of this issue. They have specific instructions which attempt to remediate the issue, however, attempting on two different MBP laptops, so far has not succeeded.
    The problem to be specific is - hang at login. The Filevaulted user account gets its password entered, then the "progress bar" mid screen will be seen to halt, never resuming. NVRAM resets dont necessarily cure this issue, but turning off FV2 definitely does.
    We are seeing this with 10.10.2 fully Apple-SUS updated machines.
    Feedback has been sent to Apple over this as well.
    Im recommending:
    a. turn off FV2 until such time as a Apple provided update cures it
    b. consider the Sophos WDE solution if WDE is absolutely required (disclosure: I havent attempted this, not sure about its workability)

Maybe you are looking for

  • Import ECC or BW index to the EP (IVIEW)

    Hello, So far I have made a Index for a data source to look for documents, and within BW I have created a Business Object, added a search class an created and Index to allo TREX to look for that information. Is it possible for the EP to look for inde

  • Problem with jre while installing 9iR2 on RedHat 2.1AS

    When I try to install downloaded Oracle 9i Release 2 (9.2.0.1.0) on RedHat Advanced Server 2.1 I receive: Error in setting permissions of file/directory /opt/oracle/jre/1.3.1/bin/.java_wrapper. Please, help!

  • Audition CS6 won't recognize ASIO drivers

        I am using Audition CS6 on Vista and the MME driver works fine for playback, but latency problems I can't fix on recording. Would like to use ASIO4all like I did with Audition 3.0, but I can't get Audition CS6 to recognize the ASIO drivers. I bel

  • DV6000(DV6145eu) Motherboard upgrade

    Hi I have a DV6000(DV6145eu) I got it from a family member because the motherboard got fried due to liquid damage, which only got spilt on connectors(usb, vga ports etc) and a little on the edge of the board.  My question is, should i jus stick with

  • Where to buy Nokia Xpress-on cover for Lumia 710 ?

    Does anyone know where I can buy Nokia Xpress-on cover for Lumia 710 in Australia? Or anywhere overseas that will ship to Australia. Nokia lists them on their website but not how/where to purchase. I notice customers in the U.S. are getting free cove