Bug for Muse CC

Hello,In my overview when I click the button to go to another page of my website , it shows me a blank page after you or may come this bug ?

Thanks you very much i resolved to problem
Le 12 avr. 2015 à 11:12, VivekPassan <[email protected]> a écrit :
Are you previewing it in "Preview" tab in Muse or from File > Preview Page In Browser ?
Please try to preview it by File > Preview Site in Browser and all the links should work.
If same happens in the "Preview site in browser " then i would suggest you to share few screenshot or site URL with me.
You can create a temporary URL from File > Publish to Business catalyst
Regards
>

Similar Messages

There is a serious bug in Super Widget for Muse mobile

Dear Developers and Admin,
There's this bug I noticed yesterday while using the SuperWidget for Muse mobile. By default the Expanding Menu pushes down the content below while it drops down. This happens on most of the cases. However, if the page contains Slideshow or a lightbox, the Menu goes behind the thumbnails and the Slideshow... You can never make it come on teh top. In these screens the content of teh page is not pushed down.
Please check the website : http://www.tridibghosh.com. This website has all the different modes "Desktop, Tablet and Mobile". Please check the mobile mode and check all teh pages. You will find the issue in the "Projects " link. All other pages behave perfectly, except this one where all teh parameters are kept uniform throughout all the pages.
Thanks

Double tap with THREE fingers. Then go into Settings>General>Accessibility and turn zoom off.

[Patch 정보] TRACKING BUG FOR CUMULATIVE MLR#6 ON TOP OF BPEL PM 10.1.3.3.1

최근에 출시된 BPEL PM 10.1.3.3.1의 통합패치입니다.
아래는 readme.txt에 포함된 patch list입니다.
# WARNING: Failure to carefully read and understand these requirements may
# result in your applying a patch that can cause your Oracle Server to
# malfunction, including interruption of service and/or loss of data.
# If you do not meet all of the following requirements, please log an
# iTAR, so that an Oracle Support Analyst may review your situation. The
# Oracle analyst will help you determine if this patch is suitable for you
# to apply to your system. We recommend that you avoid applying any
# temporary patch unless directed by an Oracle Support Analyst who has
# reviewed your system and determined that it is applicable.
# Requirements:
# - You must have located this patch via a Bug Database entry
# and have the exact symptoms described in the bug entry.
# - Your system configuration (Oracle Server version and patch
# level, OS Version) must exactly match those in the bug
# database entry - You must have NO OTHER PATCHES installed on
# your Oracle Server since the latest patch set (or base release
# x.y.z if you have no patch sets installed).
# - [Oracle 9.0.4.1 & above] You must have Perl 5.00503 (or later)
# installed under the ORACLE_HOME, or elsewhere within the host
# environment.
# Refer to the following link for details on Perl and OPatch:
# http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189489.1
# If you do NOT meet these requirements, or are not certain that you meet
# these requirements, please log an iTAR requesting assistance with this
# patch and Support will make a determination about whether you should
# apply this patch.
# 10.1.3.3.1 Bundle Patch 6823628
# DATE: March 14, 2008
# Platform Patch for : Generic
# Product Version # : 10.1.3.3.1
# Product Patched : Oracle(R) SOA
# Bugs Fixed by 10.1.3.3.1 Initial patch 6492514 :
# Bug 5473225 - PATCH01GENESIS HOT UNABLE TO CATCH AN EXCEPTION DURING A
# TRANSFORM
# Bug 5699423 - PARTNERLINK PROPERTY THAT SET BPELXPROPERTY FUNCTION DOESN'T
# WORK
# Bug 5848272 - STATEFUL WEBSERVICES DEMO ON OTN DOES NOT WORK 10.1.3.1
# Bug 5872799 - ANT DEPLOY BPEL TEST FAILS/RUNS ON DEFAULT DOMAIN NOT
# SPECIFIED TARGET DOMAIN
# Bug 5883401 - ALLOW A WAY TO CREATE EMPTY NODES - AND USE FOR REQUIRED
# NODES
# Bug 5919412 - SAMPLE DEMO BPEL PROCESSES MIMESERVICE MIMEREQUESTER AXIS
# JAVA EXAMPLE ERROR
# Bug 5924483 - ESB SHOULD SUPPORT SOAP EDNPOINT LOCATION DYNAMIC UDDI LOOKUP
# Bug 5926809 - ORAPARSEESCAPEDXML XPATH EXPRESSION FAILED TO EXECUTE
# FOTY0001 TYPE ERROR
# Bug 5937320 - STRANGE BEHAVIOUR CALLING FROM BPEL TO BPEL GETTING
# NULLPOINTEREXCEPTION.
# Bug 5944641 - BPA BLUEPRINT NOT AVAIALBLE IN JDEVELOPER
# Bug 5945059 - JAVA.LANG.NULLPOINTEREXCEPTION SENDING EMAILS WITH PAYLOADS
# LARGER THAT 1MB
# Bug 5962677 - WS RESPONSE IS EMPTY SOAP BODY IN ONE-WAY CALL
# Bug 5963425 - WHEN THE OUTCOMES FOR A HT CHANGED & IMPORTED - UPDATE
# CONNECTION ROLES IN BPEL
# Bug 5964097 - AQ ADAPTER DEPLOYMENT CAUSES OPMN TO PERFORM A FORCEFUL
# SHUTDOWN IN SOA
# Bug 5971534 - CANNOT GRANT USER TASK VIEWS TO GROUPS, ONLY TO USERS.
# Bug 5989367 - REFER TO SR 6252219.993 BPEL 10.1.3 ONLY COPIES IN ASSIGN,
# IN 10.1.2 IT CREATES
# Bug 5989527 - ENHANCEMENT WARNING SHOULD BE GIVEN UPON UPLOAD IF BPEL
# PROCESS IS OPEN IN ARIS
# Bug 5997936 - ESB FAULT DOES NOT GET PROPAGATED TO BPEL
# Bug 6000575 - PERF NEED ESB PURGE SCRIPT TO PURGE BY DATE AND PROCESS
# Bug 6001796 - POSTING OF DATE RECEIVED FROM XML GATEWAY TO BPEL FAILED IN
# ESB
# Bug 6005407 - BPEL PROCESS DOESN'T PROPOGATE FAULT THROWN BY BPEL
# SUB-PROCESS
# Bug 6017846 - MIMETYPE OF EMAIL NOTIFICATION IS NOT SET THROUGH HUMAN TASK
# Bug 6027734 - DECISION SERVICE IMPORT - LOCATING DECISION SERVICE IN .DECS
# FILE IMPROPER
# Bug 6028985 - EXCEEDED MAXIMUM NUMBER OF SUBSCRIBERS FOR QUEUE
# ORAESB.ESB_CONTROL
# Bug 6041508 - CREATING/UPDATING DVM CAUSE EXCEPTION
# Bug 6053708 - FTP ADAPTER DOES NOT SUPPORT ENCRYPTED PASSWORD IN
# OC4J-RA.XML
# Bug 6054034 - INDEX4,INDEX5 AND INDEX6 CANNOT BE USED IN BPEL CONSOLE
# Bug 6068801 - BACKPORT OF BPEL ON WEBLOGIC - VERSION 10.1.3.3
# Bug 6070991 - HT EXPORT DOES NOT EXPORT PARAMETERS, ALLOW PARTICIPANTS TO
# INVITE OTHERS
# Bug 6071001 - WSIF HTTP BINDING NOT WORKING FROM ESB
# Bug 6073311 - STRESS SCOPE NOT FOUND ON CALLBACK - WRONG (DUPE)
# SUBSCRIPTION IN TABLE
# Bug 6081070 - JMS ADAPTER REJECTION HANDLER CREATE 0 BYTE FILES
# Bug 6083419 - DECISION SERVICE SCOPE NEED TO HAVE A SPECIAL INDICATOR
# Bug 6085799 - HUMAN TASK ADDED IN SCOPE IN JDEV IS NOT UPDATED TO BPA
# SERVER
# Bug 6085933 - EXPORT AND EXPLORE SHOULD USE USER LANGUAGE AND NOT ENGLISH
# ALWAYS
# Bug 6086281 - STRING INDEX OUT OF RANGE ERROR FOR COBOL COPYBOOK WITH PIC
# CLAUSE HAVING S
# Bug 6086453 - DOMAINS CREATED IN A CLUSTER GETS NOT PROPAGATED TO NEW OR
# EXISTING NODES
# Bug 6087484 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6087645 - ESB SHOULD ALLOW USER PICK RUNTIME PROTOCOL (HTTP/HTTPS)
# Bug 6110231 - TRANSLATION NOT BASED ON MQ CCSID CHARSET
# Bug 6120226 - BPEL IS NOT SETTING THE APPS CONTEXT CORRECTLY
# Bug 6120323 - COMPLETIONPERSISTPOLICY ON DOMAIN LEVEL HAS DISAPPEARED
# Bug 6125184 - ESB JMS SESSION ROLLBACK ORACLE.JMS.AQJMSEXCEPTION
# Bug 6127824 - [AIA2.0] CURRENT XREF IMPLEMENTATION IS MISSING REQUIRED
# INDEXES ON XREF SCHEMA
# Bug 6128247 - HTTPCONNECTOR POST() METHOD SHOULD RAISE EXCEPTION FOR ALL
# STATUS CODES EXCEPT 2
# Bug 6131159 - ENABLE USERS TO CHOOSE XSD WHEN CREATING A BPEL PROCESS FROM
# BLUE PRINT
# Bug 6132141 - PROCESS_DEFAULT TABLE STILL CONTAINS INFORMATION FROM
# UNDEPLOYED PROCESSES
# Bug 6133190 - ENABLING ESB CONSOLE HTTP/S IS MAKING THE CONSOLE TO COME UP
# BLANK.
# Bug 6139681 - BPEL WSDL LINK IN CLUSTERED RUNTIME POINTS TO A SINGLE NODE
# Bug 6141259 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING IN BPEL
# Bug 6148021 - BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL
# LOSES DIGIT IN OUTPUT
# Bug 6149672 - XOR DATA - CONDITION EXPRESSION SPECIFICATION IS NOT
# INTUITIVE IN BPMN MODELS
# Bug 6152830 - LOSING CONDITIONAL EXPRESSIONS CREATED IN JDEV UPON MERGE
# Bug 6158128 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING
# Bug 6166991 - WHEN STARTING SOA SUITE,, PROCESSES FAIL DUE TO UNDEFINED
# WSDL
# Bug 6168226 - LOCATION-RESOLVER EXCEPTION THROWN IN OPMN LOGS
# Bug 6187883 - CHANGES FOR BPEL RELEASE ON JBOSS- VERSION 10.1.3.3
# Bug 6206148 - [AIA2.0] NEW FUNCTION REQUEST, XREFLOOKUPPOPULATEDCOLUMNS()
# Bug 6210481 - BPEL PROCESS WORKS INCORRECTLY WHEN AN ACTIVITY HAS MULTIPLE
# TRANSITIONCONDITION
# Bug 6240028 - WEBSERVICE THAT DOES NOT CHALLENGE FOR BASIC CREDENTIALS
# CANNOT BE INVOKED
# Bug 6257116 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6258925 - MESSAGE RECEIVED BY THE TARGET ENDPOINT VIA HTTP POST IS
# MISSING THE XML HEADER
# Bug 6259686 - TOO MANY UNNECESSARY WORKFLOW E-MAIL NOTIFICATIONS GENERATED
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6272427 - WEBSPHERE BPEL FAILS FOR DATA RETRIEVAL OF SIZE 500+ KB
# Bug 6276995 - MERGE SCOPE NAME IS NOT UPDATED WHEN CHANGED IN THE SERVER
# Bug 6280570 - XPATH EXPRESSION ERROR IN MEDIATOR FOR ASSIGNING USER-DEFINED
# CONTEXT VALUES
# Bug 6282339 - RETRYCOUNT DOES NOT WORK PROPERLY
# Bug 6311039 - ONE RECORD IS INSERTED TO SYNC_STORE IF
# COMPLETIONPERSISTPOLICY SET TO FAULTED
# Bug 6311809 - [AIA2.0] NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR
# TOPIC
# Bug 6314784 - THE PRIORITY DEFINED IN THE BPA SUITE IS NOT TRANSFERRED TO
# THE JDEV CORRECTLY
# Bug 6314982 - THREADPOOL RACE CONDITION IN ADAPTER INITIALIZATION MESSAGES
# NOT PROCESSED
# Bug 6315104 - (SET)CLASSNAME MISSING IN TSENSOR JAXB OBJECTS
# Bug 6316554 - CONSUME FUNCTIONALITY OF JMS ADAPTER FOR BEA WEBLOGIC DOES
# NOT WORK
# Bug 6316950 - FILEADAPTER HARPER ENHANCEMENTS SYNC WRITE AND CHUNKED
# INTERACTION SPEC
# Bug 6317398 - THE ICON FOR COMPUTING DIFFERENCE IS MISSING IN JDEV REFRESH
# FROM SERVER DIALOG
# Bug 6320506 - IMPORT FAILS WHEN THERE IS AN UNNAMED CASE
# Bug 6321011 - CANNOT PROCESS 0 BYTE FILE USING FTP ADAPTER
# Bug 6325749 - TRACKING BUG FOR TRACKING ADDITIONAL CHANGES TO BUG #6032044
# Bug 6328584 - NEED A NEW XPATH EXPRESSION TO GET ATTACHMENT CONTENT VIA
# SOAP INVOKATION
# Bug 6333788 - COLLAPSING OF CONSECUTIVE ASSIGN TASKS BREAKS BAM SENSOR
# Bug 6335773 - BUILD.XML CONTAINS DO NOT EDIT .. - WHILE <CUSTOMIZE> TASK
# MUST BE IN <BPELC>
# Bug 6335805 - AQ ADAPTER OUTBOUND DOESN'T RECONNECT AFTER FAILURE
# Bug 6335822 - [AIA2.0] PSRPERFESB - RUNTIME DVM PERFORMANCE OVERHEAD IN ABS
# USE CASE
# Bug 6339126 - CHECKPOINT BPEL JAVA METHOD DOESN'T WORK IN BPEL 10.1.3.3
# Bug 6342899 - OUTLINECHANGE.XML NOT UPDATE WITH ACTIVITY FROM NEW BRANCH
# Bug 6343299 - ESB CONCRETE WSDL NAMESPACE SHOULD BE DIFFERENT FROM IMPORTED
# WSDL NAMESPACE
# Bug 6372741 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3
# Bug 6401295 - NXSD SHOULD SUPPORT ESCAPING THE TERMINATED/QUOTED/SURROUNDED
# DELIMITERS
# Bug 6458691 - DIST DIRECTORY FOR 10.1.3.3.1 NEEDS UPDATE
# Bug 6461516 - BPEL CONSOLE CHANGES FOR DISPLAYING RELEASE 10.1.3.3.1
# Bug 6470742 - CHANGE THE VERSION NUMBER AND BUILD INFO IN ABOUT DIALOG IN
# ESB
# BUG ADDED IN MLR#1, 6671813 :
# Bug 6494921 - ORABPEL-02154 IF LONG DOMAIN AND SUITECASE NAMES IN USE
# BUGS ADDED IN MLR#2, 6671831 :
# Bug 6456519 - ERROR IN BPEL CONSOLE THREADS TAB:SERVLETEXCEPTION CANNOT GET
# DISPATCHER TRACE
# Bug 6354719 - WHICH JGROUP CONFIGURATION PARAMETER IMPACTS BPEL CLUSTER
# ACTIVITY
# Bug 6216169 - SCOPE NOT FOUND ERROR WHILE DELIVERING EXPIRATION MESSAGE OF
# ONALARM
# Bug 6395060 - ORA-01704 ON INSERTING A FAULTED INVOKE ACTIVITY_SENSOR
# Bug 6501312 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3 #2
# Bug 6601020 - SEARCHBASE WHICH INCLUDES PARENTHESIS IN THE NAMES DOES NOT
# WORK
# Bug 6182023 - WAIT ACTIVITY FAILS TO CONTINUE IN CLUSTER WHEN PROCESSING
# NODE GOES DOWN
# BUGS ADDED IN MLR#3, 6723162 :
# Bug 6725374 - INSTANCE NOT FOUND IN DATASOURCE
# Bug 4964824 - TIMED OUT IF SET CORRELATIONSET INITIATE YES IN REPLY
# ACTIVITY
# Bug 6443218 - [AIA2.0]BPEL PROCESS THAT REPLIES A CAUGHT FAULT AND THEN
# RETHROWS IT IS STUCK
# Bug 6235180 - BPPEL XPATH FUNCTION XP20 CURRENT-DATETIME() IS RETURNING AN
# INCORRET TIME
# Bug 6011665 - BPEL RESTART CAUSES ORABPEL-08003 FAILED TO READ WSDL
# Bug 6731179 - INCREASED REQUESTS CAUSE OUTOFMEMORY ERRORS IN OC4J_SOA WHICH
# REQUIRES A RESTART
# Bug 6745591 - SYNC PROCESS <REPLY> FOLLOWED BY <THROW> CASE CAUSING
# OUTOFMEMORY ERRORS
# Bug 6396308 - UNABLE TO SEARCH FOR HUMAN TASK THAT INCLUDES TASK HISTORY
# FROM PREVIOUS TASK
# Bug 6455812 - DIRECT INVOCATION FROM ESB ROUTING SERVICE FAILS WHEN CALLED
# BPEL PROCESS
# Bug 6273370 - ESBLISTENERIMPL.ONFATALERROR GENERATING NPE ON CUSTOM ADAPTER
# Bug 6030243 - WORKFLOW NOTIFICATIONS FAILING WITHOUT BPELADMIN USER
# Bug 6473280 - INVOKING A .NET 3.0 SOAP SERVICE EXPOSED BY A ESB ENDPOINT
# GIVES A NPE
# BUGS ADDED IN MLR#4, 6748706 :
# Bug 6336442 - RESETTING ESB REPOSITORY DOES NOT CLEAR DB SLIDE REPOSITORY
# Bug 6316613 - MIDPROCESS ACTIVATION AGENT DOES NOT ACTIVATED FOR RETIRED
# BPEL PROCESS
# Bug 6368420 - SYSTEM IS NOT ASSIGNING TASK FOR REAPPROVAL AFTER REQUEST
# MORE INFO SUBMITTED
# Bug 6133670 - JDEV: UNABLE TO CREATE AN INTEGRATION SERVER CONNETION WHEN
# ESB IS ON HTTPS
# Bug 6681055 - TEXT ATTACHMENT CONTENT IS CORRUPTED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 5521385 - [HA]PATCH01:ESB WILL LOSE TRACKING DATA WHEN JMS PROVIDER IS
# DOWN
# Bug 6759068 - WORKLIST APPLICATION PERFORMANCE DEGRADATION W/ SSL ENABLED
# FOR BPEL TO OVD
# BUGS ADDED IN MLR#5, 6782254 :
# Bug 6502310 - AUTOMATED RETRY ON FAILED INVOKE WITH CORRELATIONSET INIT
# FAILS
# Bug 6454795 - FAULT POLICY CHANGE NEEDS RESTART OF BPEL SERVER
# Bug 6732064 - FAILED TO READ WSDL ERROR ON THE CALLBACK ON RESTARTING BPEL
# OC4J CONTAINER
# Bug 6694313 - ZERO BYTE FILE WHEN REJECTEDMESSAGEHANDLERS FAILS
# Bug 6686528 - LINK IN APPLICATION.XML FILES CHANGED TO HARD LINKS WHEN MORE
# THAN 1 HT PRESENT
# Bug 6083024 - TEXT AND HTML DOC THAT RECEIVED AS ATTACHMENTS WERE EITHER
# BLANK OR GARBLED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6774981 - NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR TOPIC
# Bug 6789177 - SFTP ADAPTER DOES NOT SUPPORT RENAMING FILES
# Bug 6809593 - BPEL UPGRADE TO 10.1.3.3.1 WITH ESB CALLS FAILS DUE TO
# CACHING OF PLNK - SERVICE
# BUGS ADDED IN MLR#6, 6823628 :
# Bug 6412909 - <BPELX:RENAME> DOES NOT ADD XMLNS DECLARATION AUTOMATICALLY
# Bug 6753116 - OUTPUT FROM HUMAN TASK IS NOT IS NOT CONSISTENT WITH
# SCHEMA
# ORDERING
# Bug 6832205 - BAD VERIFICATIONSERVICE PERFORMANCE IF LDAP SERVICE HAS HUGE
# DATA
# Bug 6189268 - CALLING BPEL PROCESS VIA SOAP FROM ESB FAILS WITH
# NAMENOTFOUNDEXCEPTION
# Bug 6834402 - JMS ADAPTER IMPROPERLY CASTS XAQUEUESESSION TO QUEUESESSION
# Bug 6073117 - TASK SERVICE DOESN'T RENDER THE TASK ACTIONS
# Bug 6054263 - REUSING SOAP WSDL IN RS CAUSES SOAP ACTION'S NS TO BE
# STRIPPED
# AWAY
# Bug 6489703 - ESB: NUMBER OF LISTENERS > 1 GIVES JMS EXCEPTION UNDER STRESS
# Bug 5679542 - FTP ADAPTER: COULD NOT PARSE TIME:
# JAVA.LANG.STRINGINDEXOUTOFBOUNDSEXCEPTION
# Bug 6770198 - AQ ACTIVATIONINSTANCES >1 DOESN'T WORK IN ESB
# Bug 6798779 - ESB ROUTING RULES CORRUPTED ON RE-REGISTERING WITH ROUTING
# ORDER
# IN WSDL CHANGED
# Bug 6617974 - BACKPORT REQUEST FOR MOVING FILES FUNCTION OF FTP ADAPTER
# Bug 6705707 - VALIDATION ON ESB CAN'T HANDLE NESTED SCHEMAS
# Bug 6414848 - FTP ADAPTER ARCHIVE FILENAME FOR BPEL IS BEING SCRAMBLED
# AFTER
# THE 10.1.3.3 UPGR
# Bug 5990764 - INFORMATION ARE LOST WHEN BPEL PROCESS IS POLLING FOR MAILS
# WITH
# ATTACHEMENTS
# Bug 6802070 - ORA-12899 SUBSCRIBER_ID/RES_SUBSCRIBER COLUMN SMALL FOR LONG
# DOMAIN AND PROCESS
# Bug 6753524 - WRONG SERVICE ENDPOINT OPEN WHEN TEST WEB SERVICE OF ESB
# Bug 6086434 - PROBLEM IN BPEL FILE ADAPTER WHILE READING A FIXED LENGTH
# FILE
# Bug 6823374 - BPEL 10.1.3.3.1 BAM SENSOR ACTION FAILS WITH BAM 11
# Bug 6819677 - HTTS STATUS 202 RETURNED INSTEAD OF SOAP FAULT
# Bug 6853301 - MQ ADAPTER REJECTED MESSAGES IS NOT REMOVED FROM THE RECOVERY
# QUEUE
# Bug 6847200 - 10.1.3.3.1 PATCH (#6748706) HAS STOPPED FTP ADAPTER POLLING
# IN
# SFTP MODE
# Bug 6895795 - AQ OUTBOUND DOESN'T WORK WITH MLR#6
업무에 참고하시기 바랍니다.

David,
You are right, theer are some changes incorporated in the latest MLR # 16 on the configurations files and on the dehydration store metrics(such as performance, fields,..).
However, I would not suggest to continue working on olite, even for Development/Test purposes as you might get stuck with strange errors...and the only solution would be to re-install SOA Suite if your olite gets corrupted. There might be ways to gets your olite back to position, but trust me..its not so simple.
Also, when you develop and stress test all your testcase scenarios in an TEST Adv installation, its simple to mimic the same in actual production box, as you exactly know its behavior.
So, go for a brand new SOA 10.1.3.4 MLR # 5 (or) 10.1.3.3.1 MLR # 16 SOA Suite Advanced installation with Oracle DB 10.2.0.3 as its dehydration store.
Hope this helps!
Cheers
Anirudh Pucha

How to get sum of bugs for particular Mnth and particular Year dynamically?

Hi All,
I've a query related to dynamic date and year :
select bug_id,
category,
count(*) Total_bugs,
SUM(CASE when bug_date >= '10/1/2011' and bug_date <= '10/31/2011' Then 1 else 0 end) OCT_11,
SUM(CASE when bug_date >= '9/1/2011' and bug_date<= '9/30/2011' Then 1 else 0 end) SEP_11,
FROM AA_BUG_TBL
GROUP BY BUG_ID,BUG_CATEGORY
In the above query,Can we write one sum statement to get sum of bugs for a particular month and particular year dynamically?
for ex:2 bugs between 10/1/2011 and 10/31/2011 then 2 under oct_11
5 bugs between 09/01/11 and 09/30/2011 then 5 under sep_11
In this case we need to calculate correct no of days for feb
Thanks,
Mahender.

So...
You need to iterate based on something like the month, quarter, year... Then query on that. I'll use a "WITH" clause to illustrate:
with my_bugs as
    select bug_id
         , bug_date
         , case when to_char ( bug_date, 'QYYYY' ) = '12009' then 1 else 0 end y2009q1_bug
         , case when to_char ( bug_date, 'QYYYY' ) = '22009' then 1 else 0 end y2009q2_bug
         , case when to_char ( bug_date, 'QYYYY' ) = '32009' then 1 else 0 end y2009q3_bug
         , case when to_char ( bug_date, 'QYYYY' ) = '42009' then 1 else 0 end y2009q4_bug
         , case when to_char ( bug_date, 'YYYY' ) = 2009 then 1 else 0 end y2009_bug
         , case when to_char ( bug_date, 'YYYY' ) = 2010 then 1 else 0 end y2010_bug
         , case when to_char ( bug_date, 'YYYY' ) = 2011 then 1 else 0 end y2011_bug
         , case when 1 = 1 then 1 else 0 end is_bug_flag
      from bugs
select bug_id
       , bug_date
       , sum   ( y2009q1_bug ) over () as total_bugs_2009q1
       , sum   ( y2009q2_bug ) over () as total_bugs_2009q2
       , sum   ( y2009q3_bug ) over () as total_bugs_2009q3
       , sum   ( y2009q4_bug ) over () as total_bugs_2009q4
       , sum   ( y2009_bug   ) over () as total_bugs_2009
       , count (*)             over ( partition by is_bug_flag ) as total_bugs
    from my_bugsI mocked up some data so my results will be drastically different than yours but here are the results:
    BUG_ID BUG_DATE TOTAL_BUGS_2009Q1 TOTAL_BUGS_2009Q2 TOTAL_BUGS_2009Q3 TOTAL_BUGS_2009Q4 TOTAL_BUGS_2009 TOTAL_BUGS
      2014 10-SEP-10                 0                 0               114              1143         1257         10000
      2015 14-APR-10                 0                 0               114              1143         1257         10000
      2016 30-NOV-09                 0                 0               114              1143         1257         10000
      2017 03-JUN-11                 0                 0               114              1143         1257         10000
      2018 29-DEC-10                 0                 0               114              1143         1257         10000
      2019 12-JAN-11                 0                 0               114              1143         1257         10000
      2020 21-APR-10                 0                 0               114              1143         1257         10000
      2021 12-JAN-11                 0                 0               114              1143         1257         10000
      2022 29-NOV-10                 0                 0               114              1143         1257         10000
      2023 20-JUL-11                 0                 0               114              1143         1257         10000
      2024 04-MAR-11                 0                 0               114              1143         1257         10000

My songs are missing in the music and the used memory doesn't change. Is it a bug for IOS7? How can I fix it?

I plugged my ipod touch 5 via usb to the pc and browsed my music on itunes. And suddenly i played some music and there's a exclamation point before the song. I haven't deleted that song or moved. And the whole album was gone. And i checked the number of songs on my ipod and it decreased without change in memory used. Is it an another BUG for ios7? is there a way to fix it?

That indicates the song files are not corrupted.
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
An large "other" usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

A possible bug for Grid control?

Hi, Dear all,
We installed Grid control 10.2.0.1 on Redhat Linux R3 with existing database(10.2.0.4).
During the installation, we succeeded for repository creating but failed at OMS Configuration.
When I start oms in cmd line, I got the following error: the repository database can not be connected.
The description for the environment:
1. OMS server and repository database are installed on the same server, on which HA is used.
2. There are two floating IP on this machine,
IP | server name | used for |
xx.xx.xx.124 | cnsz030318 | oms server |
xx.xx.xx.80 | oem.db.paci.com.cn | repository database |
3.When we installed the oms with OUI, the repository server we input is oem.db.paci.com.cn
The problem we found:
During the installation, the repository was created successfully. But it failed at OMS configuration.
The error we got: the repository database can not be connected.
there are two lines in emoms.properities which seems strange:
oracle.sysman.eml.mntr.emdRepServer=oem.db.paic.com.cn
oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=cnsz030318.db.paic.com.cn)(PORT\=1535)))(CONNECT_DATA\=(SID\=oem10g)))
The emdRepServer is what we have input on OUI:oem.db.paic.com.cn. But for the connectDescriptor, it is changed to "cnsz030318.db.paic.com.cn", which does not exist at all!.
Now, we have worked around this problem by adding "cnsz030318.db.paic.com.cn" in the /etc/hosts.
But my question is, why the connectDescriptor set the HOST\ as cnsz030318.db.paic.com.cn? Why does it not use the name we input in OUI (oem.db.paic.com.cn)?
Maybe it is a bug for Grid control?

Did you install with "Use existing database" or "Use new database"?
I recommend that you use fully qualified domain names only!
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 7, 2009 2:24 PM

Are email addresses included with free accounts for Muse subscribers?

Are email addresses included with free accounts for Muse subscribers? Maybe not, huh? How would I upgrade to include an email address? Since the basic service is included with the subscription, would I have to pay full-fare for an upgrade just to get an email address? I'm worried, because I get messages saying that some servers will block forms that are sent to an address other than from the domain, and we have a form on our site.

Unfortunately, email accounts are not included in the complimentary plan (Web Basics). For that, you will need to upgrade to the next plan which is WebBasics+.

Where can I download a manual for MUSE? Everytime I do a query it puts me to the online version. I want one I can hold.

@@@

There is no 'manual' for muse other than the online one. There are some great books available though such as Adobe Muse CC Classroom in a Book (2014 release)

IMessage automatically sends as SMS even if turned off in the Settings. Is this a bug for ios 6.0.1?

I know there's still bugs for iMessage and so when I'm not on wifi but the iMessage is turned on, I don't wait for the iMessage to fail sending. I press and hold the message to send it as text message instead immediately. Then the recepient tells me that they receive my text messages twice. So what I did today, I sent an iMessage without being connected to wifi and let it attempt to send and let it fail. To my surprise, after failing as iMessage, it automatically sent as an SMS when I had that setting turned off. Do I make sense? Do you guys also experience the same problem?

When imessage is unavailable it sends it as SMS - that is normal see link http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755

Broken link for Muse videos at Adobe TV

The "view more" link for Muse videos at Adobe TV doesn't work (tested in Safari & Firefox on Mac)

On what page/URL? Thanks.

Paid membership for Muse no longer works since recent update

I have a paid membership for Adobe Muse, but after a recent update Adobe only allows me access Muse through a 30-day free trial. I am occasionally requested to enter a serial number for Muse, but cannot find any reference to this in my past emails. How can I overcome this ongoing issue?

Hi,
Please try the steps below depending on the operating system,
Windows
Click on the "Start" menu. Select "All Programs" and then "Accessories"
Right-click on "Notepad" and select "Run as Administrator"
Click "Continue" on the "Windows needs your permission" dialog
When Notepad opens, click File and select Open
In the filename field type the following:C:\Windows\System32\Drivers\etc\hosts
If any entries in the host file include keywords such as "adobe," delete those entries. These are used for Adobe Licensing.
From the "File" menu select "Save" after making changes
Restart Muse
Macintosh
Click on the "Finder" icon. Select the "Applications" folder
Open the "Utilities" folder and select "Terminal"
Type the following:sudo nano /etc/hosts
Enter the OS user's associated password when prompted
If any entries in the host file include keywords such as "adobe," delete those entries. These are used for Adobe Licensing.
Press control+o to save the file
Press control+x to close the file
Restart Muse
Please let me know if it works.

CMS solution for Muse...

We need a CMS (Content Management Software) solution for Muse. Either integration with other software, or its own internal version.
At the minimum, an article manager would be great. User management can come later.
Can you tell me if this is something that is "in the works" for Muse?
Things like this will make Muse the "InDesign" (Quark-killer) of web design. Muse is fantastic. Keep up the good work!
Dan

Hi Dan,
Was wondering if you found a solution? Not sure if it's a similar issue, I am currently creating a site for a lady who wants a news box she can update on a weekly basis. She is familiar with CMS as her website is currently hosted with 1&1 (doesn't look as pretty, but very editable from my client's point of view). The CMS in place for Muse has a nice interface but I am getting the impression it doesn't tick all the boxes for my client. Someone, and I'm afraid I can't remember who or where they were from mentioned there were other CMS solutions for Muse sites?
Penny

New release for Muse

I had an update for Muse today, but am unable to find any release notes for it. Anyone else received an update notification via CC?

Notes are located here:
Adobe Muse Help | Release notes | Adobe Muse CC

Please make for Muse Live 2D

Please make for Muse Live 2D. Without extraneous programs.
Why is this? For raising mood. For a quick understanding
for example; I drive the mouse across the screen to direct site sections and animated girl explains me the details. (with sound) Live2D - Interactive 3D animation of 2D images #DigInfo - YouTube

Hi Tuttle and Marlinespike,
"Also, the breadcrumbs are inconsistent in that there is no link back to the Category level from some individual forums, e.g.,
We see: Apple.com > Support > Discussions > PowerBook G4 (15-inch Aluminum) > Using Your PowerBook G4 15-inch Aluminum
Where we might expect to see: Apple.com > Support > Discussions > PowerBook > PowerBook G4 (15-inch Aluminum) > Using Your PowerBook G4 15-inch Aluminum"
Personally I find this consistent:
Categories and Forums are two different things, so the Categories link is on a different level
( Post New Topic - Subscribe to Forum - Mark All Topics as Read - Back to Category ).
Tuttle your version too is consistent though.
Now perhaps the whole thing is not a good idea and finally the old system was better?
I don't know, but personally I jumped on the "Categories" new features at once, found them very well designed and helpful, and am now very disappointed that they've been taken "temporarily" away.
About "the large "Apple Discussions" logo" that should be a link to Apple Discussions:
Sorry, I must be blind, I don't see what you mean.
When I need to go back to the Home page, I just click the
Apple.com > Support > Discussions > Using Apple Discussions > Feedback about New Discussions
link.
Or I use my bookmark. Or I use my browser's "command-arrowleft" if it was no too far.
As you can see, there is something I am missing in your explanations. Can you please tell me what was this feature that you miss so much, and how are you redirected too much (or instead?) to Apple main page?
Thanks!
Axl
206

Why am I suddenly getting the dreaded "ID = 5000" error with Illustrator 5.5? I'm only using CC for Muse.

I only use Adobe Creative Cloud for Muse... no other option. I have CS 5.5 and am suddenly getting the "you do not have enough access privileges" error and can't save any illustrations. What the hell is going on with Adobe?

shambles,
You could try to reinstall using the full three step way (otherwise strange things may linger):
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Bug for Muse CC

Similar Messages

Maybe you are looking for