Bug found In firmware 2.1

when we open the recent calls list and choose a number to add in a existing contacts
then before save the number if we put any other digit or change any digit after that when you save it applicaion will crash.

Thanks for being thorough with your testing. I'm trying to test myself, but I think it's generally difficult for many Americans. If they live in area that had 3G, the drop off is usually to EDGE and not GPRS. This is the case for myself. I haven't found the network speed drop off from going to EDGE to 3G area. When and if I come to a GPRS transition area, I'll see if I can test it.

Similar Messages

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

Hi I am facing some bug in new Firmware V50.0.005
1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart your phone to close that radio application. (no other go)
If any Solution is there for this please let me know.
Thanks in advance
Ssandesh T S

For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
For the music library:
1. Connect your 5800 to you PC in Mass Storage Mode
2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
3. Open your SD memory card/Removable Disk in My Computer on PC
4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Bug in new firmware 7.0 for 6300 cannot create per...

There is bug in new firmware 7.0 for nokia 6300 and maybe all 40 series.
I am not able to create access point which is necessary to access internet with java applications.
When I go Settings -> Configuration -> Personal config.sett. -> Add -> Access point (but also if I choose any other from list)
Then i go back and there is no new access point. In previous version of firmware it created access point.
Do anyone know about this issue ?
How can I tell to Nokia support that there is this bug ?
thanx for replies

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

Report bug in last firmware nokia 130 and 130 dual...

report bug in last firmware nokia 130 and 130 dual sim rm-1037 and rm-1035.
Bug is when you choose phone book and the phone freezes on the menu and after 1 minute menu works but the second attempt to open the phone book phone freezes again. problem is present in the last firmware. I hope that the problem will be eliminated in the next firmware.
I tried also with Nokia Software Recovery Tool but without success, the phone still freezes when opening the phonebook.

1. Country Bulgaria
2. Try with three sim cards three different operators in Bulgaria, Mtel, Globul and Vivacom.
3. 100% of the problem is not in the SIM card, the problem is a bug in the software of nokia 130 and 130 dual.

WRT610N - Bugs and new firmware

I installed WRT610N under XP (original firmware, no updating), runs well: Internet OK. Storage on 500 Mb Western Digital HD OK, FTP OK, WiFi OK, Media Center OK with PS3 (Twonky work well), DDNS is OK.
Considering that: FTP a bit sluggish, FTP autentication not possible (should be sorted out by firmware B10 ?!) , People says that with "B10" it is no longer impossible to get to Twonky through port 9000.
I ask: anybody can suggest me if it is worthy to upgrade my Firmware with the latest "B15" dated 28th of Luglio ? Anybody knows anything ?
Moreover: other owners please keep in touch for info sharing, it seems the only way to get knowledge on it.
Hugs

The die is cast. I have got it. When I bought it the manufacturer has not told me that USB support is crap. In fact it works, but with some bugs.Considering LinkSys Cisco is a mayor Company, I respect them and I count they sort out understandable bugs by updated firmware.
The router is also not cheap, therefore they have an obbligation to the consumers even though the post-sales service is prompt but not qualified (sigh). I forgive them because they have sooner or later to atone for their sins.
I was referring to the forum because the most qualified people who knows where to put hands are the guys like me, and better then me, the one who spend hours to get to the service who has been promised .....(sigh again).
So, I do not accept (respectfully) Your approach.
Anyone who likes to co-operate telling me what about latest July the 28th firmware ?
Hugs

[svn] 4223: Some fixes for bugs found running the TC acceptance tests:

Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

Latest E51 Firmware 200.34.36: minor bug found

Hello, I have found a little bug; unfortunately I don't know, if it's also on the initial firmware, but the 200.34.36 does have it.
If I have my SD card inserted (8 GB, with quite many MP3 and WMA files), it's not possible to set the system sounds, like ringing tone, mail tone and so on.
While opening the respective menu, instead of seeing of the usual sound clips list, I see only "Download sounds" and "Off".
I think, the e51 isn't able to enumerate the complete list?...
While the SD card isn't inserted, the lists work as they should.

maybe I am wrong but I can not see the similarity with your computer. when you install a new disk you install a lot more hardware than just the disk itself.
I use many professional devices that work with memory cards and they all have a maximum for which the manufacturer guarantees the device to work. If you install higher capacity cards you may expect problems. Because the devices needs to access the memory card which is a completely different process than when a computer wants to access it's hard disk.
There are even differences in different brands of cards. Some brands may produce a 8 GB card that works with a certain device others produce a card that does not work. When you upgrade your firmware and you get a problem as soon as you insert your card, it is very likely that the card is the issue.
I would suggest to try a 4 GB card and see if the problem persists. If not you know the answer. You can alternatively try different brands of 8 GB cards.

Firmware bug found in RV042 Version: 1.3.9

I have several customers using the RV042 to connect several branch offices to a central location. Recently I tried connecting an RV042 to a different brand IPsec router (Calyptix AE1000) and got it to connect, however it would only stay up about 30 seconds, then fail. We eventually discovered after weeks of troubleshooting, that the RV042 was truncating the Incoming SPI (in Manual Keying Mode) to seven digits instead of taking the full 8 bit bey. Calyptix was able to succesffully convince their device to accept a seven-digit key and now it works perfectly.
When there's a firware released for this product I'd like to see this problem resolved so I don't have to call Calyptix every time I try to integrate one of their boxes and an RV042/RV082.

Thanks, I filed this as bug 5957845
Keimpe Bronkhorst
JDev IDE team

Huge bug found with iphone 2.0 firmware and windows xp sp3

I wasn't sure where to post, so please check this link
http://discussions.apple.com/thread.jspa?threadID=1598283&tstart=0

bump

Bug in WRT600N Firmware: password edit

I discovered a bug in the current WRT600N firmware. When changing the router's password, special characters appear to NOT be recognized, even though the router's error message lists them. For example, if I use a + (plus) sign the router complains. I had no problems with the WRT310N in using a plus sign as part of the password.

I'm getting very similar problems, with the situation not limited to files but to entire folders.
Used the web interface to create shares and created folders within those shares from both an XP pro box and a Vista box. Now, though both boxes can SEE the folders, neither can read or write anything within those folders.
Using the Web interface to create another new share makes a read/writeable share that works -- for what length of time I'm not yet sure.
This is with a new maxtor onetouch. Original files and folders worked fine, but now, completely broken.
I'm running the .35 firmware, too. This thing has other bugs as well.
DATE STAMP is wrong unless you leave time zone to GMT. For some reason, it reads system clock as GMT, and sets time from there.
Certain bits of the web interface lead to "page not found" errors, too.
Probably going to have to return this thing to the store, as this (non) functionality was one of the main reasons I spent the dough on the product. Doesn't work, back it goes.

BUG FOUND!! in Airport Disk programming

I'm betting this is having a bigger issue then most poeple realize as it effects reconnecting to the Airport disk.
Ok after lots of testing I've figured out a major bug in the Airport Disk Programming for Security.
This has only been verified with the following settings:
1. Airport Disk is configured with Accounts for access
2. Formatted with HFS+ USB drive.
Discription:
1. When connecting to the Airport Disk you get the error:
"Connection Failed
Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator."
2. You retype the password and user name and it still says the same thing over and over and over.
The Cause of problem:
You connect to your Airport Disk the first time with no problem using your login and password. If you cause your connection to be interrupted for a small amount of time and you get that Warning about server disconnect and it shows your airport disk and personal disk with the disconnect button, and they disconnect!! Then you cannot reconnect to the Airport Disk till you reset the Airport Extreme.
To get this Disconnect dialog, it can be caused by a number of common uses, here are a few of the common ones:
1. you VPN into work (with Airport Disk shares mounted)
2. you change from wireless to Hardwired connection (with Airport Disk shares mounted)
3. You let your computer go to sleep when its on a wireless connection but are connected through another wireless access point hardwired to the network (with Airport Disk shares mounted)
When getting your Airport Disk volumes disconnected in this way, The Airport Extreme I'm guessing is deactivating the account and not properly disconnecting the connection. So at this point you have to Reboot the Airport Extreme to let you use your account again on the Airport Disk.
I hope some poeple from Apple actually read these. I've had to reset my Airport extreme about 24 times a day between my wife's 15" MBP and my 17" SR MBP getting this disconnect problem.
And for those poeple out there who keep having Airport Disk connection problems, Lets make sure your not having this problem. To test, simply reboot the airport extreme router & see if you can connect to your Airport Disk Volumes, then once your volumes are mounted turn off your Airport wireless (on your MAC) or unplug your Hardwire till you get the disconnect message. Then try to reconnect to your Airport Volumes after restoring your network connection.
This issue needs to be fixed ASAP!!!!
Please reply to this message with your nominations to try and get this issues raised to a P1 or lvl 1 priority so it's in the next firmware upgrade as it's not an issue with OS x programming side, as a rebot of the computer still doesn't restore the connectivity with the AirPort Disk.

HERES A SOLUTION I POSTED IN ANOTHER THREAD!
Hi,
I've been trying to work out the Hard Drive problems with the Airport Extreme for a few days and have had some success, so I'll share the info if its any use!
First of all, your printer and both hard drives all run off their own power supply, therefore, you don't need to have a powered usb hub, or just take the plug out and keep using the hub, save yourself a plug!
More importantly, I have had the same thing with the hard drive appearing in the Airport Utility yet whenever I try to connect, it comes up with an error and can't mount, although when I go to network and connect it appears but then goes wrong at the last part mounting, this is what I found...
the first time I plugged hard drive in all worked nicely, however, any time I have unplugged the power to the Aiport Extreme and connected again it'll show but never connect. When I went to make a few partitions I realised that if you unplug the router and repower, whatever HD name its seen before doesn't work until the HD name was changed again. For example....
I called my first HD to connect 'wifiHD', was working fine, next time i unplugged router was still showing in network but I couldn't mount it, I then plugged it to the mac and renamed it 'wifiDISK' for example and plugged it back into the router and it worked fine! Its very strange cos when I needed to unplug it last time I then had the same trouble and just renamed it back to 'wifiHD' it worked fine! Its a little flaw which is a right bugger to find so the bottom line is...
RENAME THE HARD DRIVE EVERY TIME YOU UNPLUG THE ROUTER AND YOU CAN MOUNT IT AGAIN
Another tip is format your HD in 'Mas OSX Extended' as it can be read by both mac and PC over the network. Then as windows isn't the best when you go to 'My Network Places' and 'Add Network Place' if you can't find the HD or even the router then enter
\\routername\\hardrivename\
in this format into the box, it'll take a mo but it'll then ask for the password! I personally have my hard drive guest access read + write so I entered
user: guest
password: base station password (or disk password as selected in airport utility)
and it all worked!
Sorry for the long explanation, hope this has helped!

A Bug in Nano3 firmware 1.0.3 ?

I bought a nano3 on Dec 24, 2007. One week later I accidently found out that nano3 wouldn't work completely in about 2 hours while playing in "one-song repeat" mode. This is a BIG UNACCEPTABLE RIDICULOUS bug concerning main functions of an MP3/MP4 device which is sold at such a high price. I think Apple should provide firmware updates for this bug as soon as possible.

We know. It's been discussed in many threads over the past few weeks/months.
Here's one such thread.
http://discussions.apple.com/thread.jspa?messageID=6122074&#6122074
Hopefully someone from Apple is reading this and will fix.
Nope. This is purely a user to user forum. Send Apple some feedback about this issue.
iPod Feedback.

MAJOR TM Bug found in 10.6.1! Time Machine corrupts HFS+ Filesystem! Raid 0

Hey there,
i guess i just found a major bug in 10.6.1 and Time Machine which will corrupt the whole Partion which was selected for the Time Machine Backup.
This is what i got here atm:
2x Western Digital MyBook Mirror Ed. (ext. 2TB Raid0 HDD (2x1TB))
1x Mac Pro running 10.6.1
1x Macbook Pro running 10.6.1
1x Mac Mini running 10.5.8
Ok here we go:
I just updated to Snow Leopard a few weeks ago and wondered why my always working WD MyBook was not working as a Time Machine Backup Partition anymore.
Everytime i started a backup it failed after 10 gig or so. After reading all over the troubleshooting and this forum i am a 100% sure that this is not a usually bug like not formatting the hard drive to GUID Mode or so.
Well... i tried the second MyBook.. same result on both Macs running 10.6.1
Now i got suspicious and opened the MyBook in order to put those 2 HDDs in my Mac Pro and built a 2TB Raid0 via OSX.
Guess what? Same result when running Time Machine! Running Time Machine on a single 1 TB HDD was working perfectly fine.
No i just remebered that there was a Mac Mini hooked up to my TV that was still running 10.5.8 just because of Plex... Hooked up BOTH MyBook Mirror Editions and both worked perfectly fine!
Now where can i report this error? I have no doubt that Time Machine on 10.6.1 is corrupting the HFS+ Filesystem when the partition is a RAID 0 Partition.
Please let me know what you think and where i can report this bug. Anyone knows if this one is already fixed in 10.6.2?
Thanks!
André

Yeah i did check the firmware updates for both mirror editions. Both are up to date. What botheres me is that they are not working aswell when they are out of their enclosure and directly built in to the mac pro. Can this really be a firmware issue then?
From what I've read on repair/recovery sites, WD does put some of their firmware on a special part of the drive's platter itself. So it's still possible to have instructions on the actual disk that can create a problem. I do not know if this is causing your issue, it's just something I became aware of when shooting trouble on some MyBook/Mac issues. There are some WD enhancements to power management that may be problematic for Time Machine. I don't really know the whole story, just relaying what I've read.
It's also possible that 10.6.2 (in beta) will help with an issue like yours. In our machines we've been using Hitachi and Seagate and the occasion Samsung drives for the last few years. Our external closures come from OWC and we haven't had any of the firmware issues that happened with the Leopard release and WD and now maybe the SL release.
The only way I would be able to point a finger right now would be to swap in a couple of other drives and see how they work. Right now it doesn't matter who's at fault, Apple or WD. The drives don't work. If it's a problem with your installation you may be able to determine that by doing the above tests. If it's a problem with Apple's drivers there may not be a repair possible or a future update will be required. The same goes for the WD drives.
Sidenote: For our own network, we have decided to do away with Leopard Server on an old Dual G4 1.42 tower and use our new ReadyNAS drive from Netgear. It's already working perfectly with Time Machine for several computers, file storage for PC/Mac/Linux, torrent download machine, basic web server, etc. We've put in 4 1TB drives and got 2.7TB of redundant hot swap raid. We'll replace the 1TB drives with 2TB drives, one at a time (although the available space won't increase until all 4 drives are swapped in), while the NAS is online, to increase our storage as required and the drives come down in price.
We decided that if the data is important then a striped 2 drive volume isn't safe enough. We would have needed to mirror the drives and loose half the space and still have to keep the old server online.
I'll watch this thread for information from others. I don't have the drives you are using to test with.

Bug found In firmware 2.1

Similar Messages

Maybe you are looking for