BUG FOUND-- With Shadows on Non-FCP Generated Layers

In FCP 6, this bug has been verified by many other users on forums across the web such as CreativeCow, DVCreators, and more. This BUG is a "repeatable problem" with the software.
PLEASE take a moment to experiment with this so Apple can take care of this.
The quality of footage specifically when adding a Drop Shadow is degraded when scaled-down and rendered, (SEE LINK BELOW).
http://www.jonesinc.com/tech/fcp_interlacecomp.jpg
This is simply scaling footage to 26% and adding a shadow.
NOTE: Scaling colorbars, a solid color, or any FCP generated object looks fine. We can export a clip from Final Cut and look on any Mac, PC, or monitor to see the issue is within the software converted file, not the video display.
The ONLY other time it looks correct is when you change the sequence settings so the FIELD ORDER is NONE, rather than Lower-field. However, this of-course will cause issues with the interlaced footage during playback for Broadcast...again not acceptable.
Various Codecs, Sequence settings, etc have been tested with the same poor results.
Again, this "Bug" has been verified several times with various systems, Operating systems, and versions of FCP. Again, PLEASE take a moment to experiment with this so Apple can take care of this.
Sincerely,
SYSTEM:
FCP 6.0.2
OS X 10.5.2 Leopard
QT Version 7.4.1
2 X 3.2 GHz Quad-Core Intel Xeon
8 GB 800 MHz DDR2 DB-DIMM
Kona 3 HD with AJA breakout box
Apple 30" Cinema Display and out to 55" Hitachi Plasma

Sorry to report it is not working at all , allways the same message cant find the vido or audio file but in reality it work for the audio file but error occur at the video compression stage.
This is a bug since Apple suggest 1GB per core and i try as low as 4 instances , Without Share i can use with no problem at all 12 instances and it is realy fast and Share offer the selection of Quickclusters.
I short this Mac Pro cant use Share when any Quickcluster is in use as you see but i can use any Quickcluster when Share is not used to do Blu-Ray , so the important feature Share is Useless and since Apple promote it to do Blu-Ray one step we got a serious bug at the moment David.

Similar Messages

Kernel Panic at low battery with MacBook bug found - with solution

Hello All,
I think I've found a bug with Leopard concerning laptops. I started a thread which I'll link to below.
http://discussions.apple.com/thread.jspa?threadID=1219413
Other people have had this same issue - I've seen it on a few different posts. Does anyone know the best way to contact Apple regarding this? I don't know how active they are in reading this forum, and I want to make sure they know about this, as it's probably something that can be fixed with an OS update.
To summarize, I'm including a couple of key posts:
Posted Nov 4th 2007...
Hello,
I just got one of the new November 07 MacBooks. The machine is great, and screams with the pre-installed Leopard.
First thing I did was plug it in to charge as I started configuring software. Once it was fully charged, I pulled the plug, and began using it on battery. My plan was to calibrate the battery, by running it all the way until it forced a sleep, then shutting down and plugging it in again, as Apple recommends.
Problem is, I never got the "Low Battery" warning, or even the sleep warning. At around 10 minutes of power left, I simply got a kernel panic. A few seconds later, the laptop just switched off.
I plugged in again for a few minutes, then ran it down again to see if I could reproduce the error, and I did get the low battery warning.
The next time the battery ran down, it gave me the kernel panic.
Is this happening to anyone else? Is it a new MacBook problem, or a leopard power management problem? I'm having no other issues at all with the MacBook or Leopard. Any help would be appreciated.
Thanks!
Nov 12th, 2007...
Well, It's been a few cycles since the first one, and all is well. I'm getting the low battery warning when it runs low, and no kernel panics (knocking on all available wood). If I start having problems in the future, I'll update this thread, but for now I'm marking it answered. It was probably Leopard not reading the uncalibrated battery correctly.
Dec, 31st 2007.....
Hello all,
Short followup here: I've have 30 successful cycles after the first couple of kernel panics, and it's time to calibrate the battery again. I tried to do it yesterday - charged the battery all the way, used the macbook while plugged in for two hours, unplugged the adapter and continued to use it until I got the low battery warning. I shut down everything and let it sit - waiting for it to go to sleep. Instead, I got a kernel panic, and the computer shut down. It would not restart until I plugged it in, but I know there was some battery left, since it panicked at 2% battery. I let it charge for an hour or so, then used it again until I got the low battery warning. This time, it went down to 0%, but panicked and shut down instead of going to sleep.
I'm trying this again, after charging all the way last night, and just leaving it on to drain. I'm at 20% right now, and I'll post to let you know what happened.
Dec 31st, 2007....
Hello All - I think I've figured this out. Looks like a software bug with Leopard.
I did get another kernel panic just now at 0%, after the low battery warning. But then I had a revelation. In trying to calibrate the battery, I had set my energy saver settings to never sleep under the battery settings - so I could leave the notebook overnight to drain. I gave it a bit of a charge, then set the battery setting (in energy saver) to sleep after 20 minutes. I restarted, used the computer for a while, got the low battery warning, the computer went down to 0%, then went to sleep as it should.
I believe that since I had the computer set to "never" go to sleep, Leopard didn't know how to handle it when the battery ran down, and kernel panicked. Perhaps this happens on new MacBooks, because these settings aren't written yet? Regardless, it's obviously an OS level bug here.
For those having the problem, make sure your battery settings under energy saver are set to allow sleep after a time.

Start here:
_http://www.apple.com/feedback/macbook.html_
Joe

[Urgent] Bug found with coherence LimitFilters - Coherence 3.7.1.9

Hi,
We believe we have identified a serious bug with LimitFilters while using the Coherence Extend client (I am not sure if it only affects the extend client).
The summary of the bug is that when using Integers as keys to a cache, we get different results as to when we use Strings, Double, etc, when the data is partitioned across two nodes. We do not get the correct results of the query. Also of note is that this only happens when we provide a comparator.
Steps to reproduce
- Start up a distributed cache across two nodes.
- Add data to the cache, a simplified example is a cache of Integers->Strings
- See the test below
Has anybody experienced this before? I have tried to isolate the test case as much as possible but it could still be environment dependent.. any suggested workarounds that are not too much of a hack are appreciated! If we increase the page size, the problem seems to disappear.
[code]
@Test
public void testStringCache() {
NamedCache cache = CacheFactory.getCache(CoherenceCacheName.Product.getXmlName());
cache.clear();
productCache.put(Integer.valueOf(49355),""+49355);
productCache.put(Integer.valueOf(49356),""+49356);
productCache.put(Integer.valueOf(49357),""+49357);
productCache.put(Integer.valueOf(49358),""+49358);
productCache.put(Integer.valueOf(49362),""+49362);
productCache.put(Integer.valueOf(49365),""+49365);
productCache.put(Integer.valueOf(49366),""+49366);
productCache.put(Integer.valueOf(49423),""+49423);
productCache.put(Integer.valueOf(50284),""+50284);
productCache.put(Integer.valueOf(59404),""+59404);
productCache.put(Integer.valueOf(62897),""+62897);
productCache.put(Integer.valueOf(63342),""+63342);
productCache.put(Integer.valueOf(66133),""+66133);
productCache.put(Integer.valueOf(68848),""+68848);
productCache.put(Integer.valueOf(99861),""+99861);
productCache.put(Integer.valueOf(326637),""+326637);
productCache.put(Integer.valueOf(365149),""+365149);
productCache.put(Integer.valueOf(366043),""+366043);
productCache.put(Integer.valueOf(366569),""+366569);
Filter productCacheFilter = new AlwaysFilter();
int pageSize = 20;
LimitFilter limitedFilter = new LimitFilter(productCacheFilter, pageSize);
limitedFilter.setPage(0); //limitfilter is zero based.
Set<Map.Entry<Integer, ? extends IProduct>> products =productCache.entrySet(limitedFilter, new ReflectionExtractor("toString")); // the reflection extractor here is a comparator.
Integer count = (Integer) productCache.aggregate(productCacheFilter,new Count());
System.out.println("Count is "+count + "but products = "+products.size());
[/code]
- If we change Integer to String/Double, the counts match (19/19). Otherwise the results are 19/17
- Removing the comparator fixes the issue

Bug 17287442 has been created for this issued.
Paul

Huge bug found with iphone 2.0 firmware and windows xp sp3

I wasn't sure where to post, so please check this link
http://discussions.apple.com/thread.jspa?threadID=1598283&tstart=0

bump

FCP 7 with Share dont work when a Quickcluster is Active (Bug Found).

If you send your sequence with the option share of the new FCP 7 to create a Blu-Ray by example you will get an error who can be something like video file not found with your Quickcluster active.
Share give you the option to select your Quickcluster but that is not working at all guys.
Seem not important but think about creating a H.264 for Blu-Ray , it give you a very long wait ...
For me let get an example : Quickcluster 10 instances for a XDCAM EX of 12 Minutes take 25 Minutes , and for 12 instances it take 22 Minutes , no Quickclusters it take 30 Minutes.
On short project not important but long duration Blu-Ray well not very funny.
I am on a Dual Quad Cores 12 GB ram , i hope Apple will fix this for the benefit of all of us.
Message was edited by: Daniel Goyette

Sorry to report it is not working at all , allways the same message cant find the vido or audio file but in reality it work for the audio file but error occur at the video compression stage.
This is a bug since Apple suggest 1GB per core and i try as low as 4 instances , Without Share i can use with no problem at all 12 instances and it is realy fast and Share offer the selection of Quickclusters.
I short this Mac Pro cant use Share when any Quickcluster is in use as you see but i can use any Quickcluster when Share is not used to do Blu-Ray , so the important feature Share is Useless and since Apple promote it to do Blu-Ray one step we got a serious bug at the moment David.

Can I publish keyframed parameters in an FCP generator?

Hi
I'm making an FCP generator in Motion and have a layer which moves from (0,0) to (x,y) and then goes back to (0,0).
What I would like to do is publish the (x,y) position so that I can change this in FCP. I have currently keyframed the animation with a dummy value for (x,y), but when I try to publish this it works fine in the Project Publishing pane (with values and keyframes) but when I bring it into my FCP timeline I have no keyframes and a zero value.
I can go in and manually add keyframes to my position parameter, but that rather spoils the whole benefit of doing it as a template. If the keyframes carried over it would be a start. If I could isolate the (x,y) keyframe and just allow that to be changed while maintaining the (0,0) that would be awesome.
If you cannot do this is it a bug which may at some point be fixed, or is it not meant to do this? The fact that the keyframes are there in the Project Publishing pane makes me think that they should export to FCP.
Would this work if I set up a rig? Can I specify values at certain points in time and then use a slider or similar to specify where the position value will go at my mid-keyframe? I haven't used rigs before but am happy to learn how to use them if they can do what I want.
My other thought (although I think this will become an inelegant solution) was that I could use a ramp to behaviour on x-position and one on y-position, and publish these values with ramps back to (0,0). At this point that doesn't seem too complicated, but I actually have a number of layers doing a number of things [and sometimes starting at (x,y) and moving to (0,0) and then back to (x,y)] so would have quite a lot of ramp values published which would become confusing, if this would work at all.
Perhaps I would have to use a rig to combine some of these if this is my only option?
Sorry if I'm at all vague. I know very clearly what I want to do and sometimes get befuddled explaining, but if I can publish keyframed position parameters (or preferably just the mid-point) I know that would solve it quite easily.
I'll keep experimenting and update with how I get on, but any help would be greatly appreciated.
Cheers

Sorry, my mistake. I forgot to mention that this is an image movement for a slideshow and will be repeated (with the variable (x,y) values) multiple times in the timeline.
Yes, if it was a single instance then keyframing in FCP would be fine. For the thirty or so occasions I will need to keyframe it makes more sense to automate if possible.
I tried rigs but the same thing happens.
Then I managed to make something work whereby I keyframed the rig to go from 0 to 100 to 0 and set the corresponding x positions as 0 and 100. Publishing this makes the layer move to (0,100) and back to (0,0) when the slider is set at 100 and lowering the slider lowers the x position reached.
This only works in one direction (can't move left and right) so isn't ideal.
Then I changed the keyframed animation to two ramps on the x position and it's actually more elegant than I thought. One ramp goes from 0 to x and stops with an end offset. Then the second ramp kicks straight in taking it from 0 to -x. Set up a rig with a slider connected to both ramps end values, one directly connected and one inversely connected. Hey presto, one slider connecting to a variable move in the x direction that also accepts negative values (I played with the max and min values of the slider).
I just need to do the same for y position. This should also work where I start at (x,y) as I will just connect to the start value and tweak the start offset to time my move.
Hope that makes sense. If anybody wants to do something similar and needs further explanation please ask. This is truly amazing. I can set up a zoom in to start and end anywhere on screen (i.e. zoom top left corner into middle of screen) and control where we zoom from within FCP... or control other parameters in a similar way.

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

PO Release Strategy - Only for Non MRP generated materials

Hello,
I have a requirement in which any material which was generated via MRP (via PR) should not go through a release strategy at the PO level, but a non MRP generated PR should...
Is this possible at all? I know its possible at the PR level, but not sure at the PO... Would this be a case where we would need to added a field to the CEKKO structure thats for MRP generated PRs ?
Thanks

Hi,
By business any PO created, should follow release procedure as PO a committed document which will further send to vendor.
If you are sure about your requirement, PO created from MRP PR should not follow release strategy, then no need to go for any User Exit.
Just create separate document type for PR (ZMNB) , create separate document type MRP PO( ZMNB) and link MRP PO document type ( ZMNB) with MRP PR document type( ZMNB) in flowing path:
SPRO>MM>Purchasing>Purchase Order>Define Document Types
Now select your ZMNB B Purchase Order Document type and click link purchase requisition document type in Dialog Structure, enter ZMNB Purchase Requisition Document type with a new entry & save.
As you created release characteristics of document type (CEKKO with BSART), then do not keep Value u201CMRP PO document type (ZMNB) u201Cin the release characteristics of document type and design your release strategies.
Now create your PO with MRP PO document type (ZMNB) and see no release strategy triggered.
Regards,
Biju K

Cannot login with password containing non-ascii characters

Hello,
I have web application, form based login. UTF-8 is specified "everywhere".
And it works, except for passwords.
If user register itself with password containing non-ascii characters, it is correctly written in database, but when doing either programmatic login or normal form based login, if fails.
If the password is only ascii, it works.
Username of login could be ascii or non-ascii, it doesn't matter, both works.
I'm using sun java application server 9.1.
jdbc realm.
I'm not using hashing passwords, just clean (now)
I tried configure realm Charset: UTF8 as last chance, but it doesn't work either.
The problem is only with non-ascii characters in password.
Any help very appreciated
Thanks a lot

hi,
I know all that, but that's not the case. My app uses preparedStatements, everything is properly configured, in all pages, utf-8 is going from user to db and back without any problems.
The only problem is with password field. As I am using form based login, with jdbc realm configured (again, nicely working when only ascii characters), I have very little chance to do something bad through the login phase.
I'm not talking about special characters, I'm talking about non-ascii characters, let's say - Chinese, arabish, Russian alphabet etc.
When user registers (my code), the fields are properly written to db. I have checked that, trust me.
But the Sun app server realm seems to have some problems with the password field.
(realm uses jdbc connection to mysql, the url contains all extra parameters to be sure about utf8. there is nothing more what can be configured...)
If I try other alphabet codes in login and ascii in password, it works. But soon, as I use other alphabet code also in password, it doesn't work anymore.
My only idea is, that I could try MD5 to create ascii only characters (I hope it works that way) on the client with javascript and then set Digest to MD5 in realm configuration. But still, it seems very strange. The clear way storage should also function? (now set Digest to 'none')
Is it a bug of Sun App Server?
thanks

Weblogic 12c : Spring taglib No tag library could be found with this URI

Hello,
I have an application which deploy perfectly on JBOSS 7 and Websphere
My WAR includes WEB-INF/lib/spring-webmvc.jar which contains all .tld files declaration (stardard stuff up to now....)
When I try to acces ths page (JSP) I got : No tag library could be found with this URI
Really don't know why ??

I think that there is bug in JSP precompilation by weblogic 12c maven plugin and appc. Seems me that jsp compiler can lose sometimes tag libraries it's precompiling. Next retry using exactly same pom can be successful. I get same results using command line and OEPE 12.1.1.0 mave(pom). My java options for maven package are(-Xmx1024m -Xms1024m -XX:PermSize=512m).
When I get the error it's something like
"Failed to execute goal com.oracle.weblogic:wls-maven-plugin:12.1.1.0:appc (default) on project ui_elements:
There are 1 nested errors:
weblogic.utils.compiler.ToolFailureException: jspc failed with errors :weblogic.servlet.jsp.CompilationException: naviButtons.tag:23:6: The tag handler class was not found "jsp_servlet._tags.__pagelink_tag".
<T:pageLink url="${naviStatus.previousPage.linkUrl}"
^--------^
naviButtons.tag:23:6: The tag handler class was not found "jsp_servlet._tags.__pagelink_tag".
<T:pageLink url="${naviStatus.previousPage.linkUrl}"
Failed to execute goal com.oracle.weblogic:wls-maven-plugin:12.1.1.0:appc (default) on project ui_elements:"
Next unsuccessful compilation can mention different tags. Very irregular behavior.
Do you have resolution?

Internal table with Dynamic and Non dynamic fileds

Hi Experts,
How to get the internal table with Dynamic and Non-Dynamic Fields.
Could u please help me.
Thanks,
Varun

Hi,
Execute the below sample code or analyze it there is appropriate description provided.
*& Report ZTEST_PRM_DYN_ALV
REPORT ZTEST_PRM_DYN_ALV.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
*Create fields .
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'name1'.
wa_it_fldcat-datatype = 'mara-matnr'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
*clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
data: wa_cat like line of alv_fldcat.
*clear wa_cat.
wa_cat-fieldname = 'matnr'.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '10'.
append wa_cat to alv_fldcat.
do p_flds times.
clear wa_cat.
wa_cat-fieldname = sy-index.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '6'.
append wa_cat to alv_fldcat.
enddo.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = alv_fldcat
tables
t_outtab = <dyn_table>.
endform.
Hope this will help, reward if found usefull.
Cheers,
Ram.

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

Stories workflow (from non FCP markers)

Say I create 2 stories. The first one plays about half of the DVD jumping between several tracks to specific chapter points (whereby Im not really using End Jumps because everything is dictated by the Story?)
The 2nd one plays the "long cut" which simply skips around to more of the chapter markers. Then I apply each story to a button?
Given the GOP issue with non FCP markers in DVDSP, I guess I'd also have to render seques where the chapter point are going to be. Is it true that using Stories will make the chapter jumps quicker or will each jump have the dreaded pause?
G5 2.7 Mac OS X (10.4.2)

Is it true that using Stories will make the chapter jumps quicker or will each jump have the dreaded pau
Usually it is quicker, but depends upon how far the are away from each other, whether they are in order or bouncing back and forth. But in general faster than scripting jumps

(CSS) Rounded corner divs with shadows...

Hi,
It appears that with IE9, it's now safe to use CSS-generated rounded corner divs.
What about rounded corner divs with shadows?
Is this now do-able? (and by do-able, I mean viewable in IE9 and FF4)
Thanks!

Most modern browsers support CSS Border-Radius. However, you will need some webkit and mozilla specific rules for Firefox 3, Safari/Chrome.
BORDER-RADIUS
#Your-Div-Name{
-moz-border-radius: 20px;
-webkit-border-radius: 20px;
border-radius: 20px;
/**NOTICE THE SYNTAX DIFFERENCES FOR MOZILLA**/
#Complex-Borders {
background: #FFF;
color: #000;
border: 9px solid red;
/**MOZILLA**/
-moz-border-radius-topright: 55px;
-moz-border-radius-bottomright:8px;
-moz-border-radius-bottomleft: 0;
-moz-border-radius-topleft: 22px;
/**WEBKIT**/
-webkit-border-top-right-radius: 55px;
-webkit-border-bottom-right-radius: 8px;
-webkit-border-bottom-left-radius:0;
-webkit-border-top-left-radius:22px;
/**OPERA, OTHERS**/
border-top-right-radius: 55px;
border-bottom-right-radius: 8px;
border-bottom-left-radius:0;
border-top-left-radius:22px;
BOX-SHADOWS:
#Your-Div-Name {
-moz-box-shadow: 5px 5px 5px #000;
-webkit-box-shadow: 5px 5px 5px #000;
box-shadow: 5px 5px 5px #000;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

[svn] 4223: Some fixes for bugs found running the TC acceptance tests:

Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

BUG FOUND-- With Shadows on Non-FCP Generated Layers

Similar Messages

Maybe you are looking for